Research Output 1984 2019

Filter
Conference contribution
2018
3 Citations (Scopus)

Flowing H 2 Gas Concentration Measurement Using Ultrasound from Exterior of the Pipe

Taskin, M., Kido, T. & Kato, Y., Dec 26 2018, 2018 IEEE SENSORS, SENSORS 2018 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 8589539. (Proceedings of IEEE Sensors; vol. 2018-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonics
Pipe
Gases
Drilling
Air
2017

TEM observations of Ge processed by high-pressure torsion

Ikoma, Y., Kumano, K., Edalati, K., McCartney, M. R., Smith, D. J. & Horita, Z., 2017, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2017). p. 17-18

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermal effects on the formation of Si and Ge metastable phases during HPT processing

Kumano, K., Ikoma, Y., Edalati, K., Saito, K., Guo, Q. & Horita, Z., 2017, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2017). p. 19-20

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Formation of metastable phases and nanograins of Si and Ge by high-pressure torsion

Ikoma, Y., Jan 2016, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2015). p. 4-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

HPT processing of germanium at cryogenic temperature

Ikoma, Y., Oct 2016, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2016). p. 66-67

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen trap in fine Ca(OH)2 powder made from scallop-shell waste

Tsuchida, H., Aramaki, M., Furukimi, O. & Kato, Y., Jan 1 2016, Electrochemical Energy Summit (E2S) - Poster Session. Yoon, W-S., Liaw, B., Weber, A., Uchida, H. & Glick, M. (eds.). 54 ed. Electrochemical Society Inc., p. 31-38 8 p. (ECS Transactions; vol. 75, no. 54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Powders
Hydrogen
Nuclear magnetic resonance
Hydrated lime
Temperature

Investigation of electrical resistivities of nanograined Si produced by high-pressure torsion

Chon, B., Ikoma, Y., Kohno, M., Shimoi, J. & Horita, Z., Oct 2016, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2016). p. 53-54

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Observation of nanocrystalline silicon processed by high-pressure torsion (HPT)

Fukushima, Y., Edalati, K., Ikoma, Y., Smith, D. J. & Horita, Z., Jan 2016, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2015). p. 37-39

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reduction in thermal conductivity of bulk silicon processed by high-pressure torsion

Kohno, M., Sivasankaran, H., Tabara, M., Ikoma, Y. & Horita, Z., Jan 2016, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2015). p. 7-8

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Mechanisms of stick-slip vibration observed during ejection of warm compacted iron powder

Ozaki, Y., Takamiya, T. & Ono, T., Jan 1 2015, Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015. Metal Powder Industries Federation, (Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stick-slip
Iron powder
ejection
coefficient of friction
slip
2014
3 Citations (Scopus)

Aging and precipitation behavior in supersaturated Al-2%Fe alloy produced by high-pressure torsion

Cubero-Sesin, J. M., Watanabe, M., Arita, M. & Horita, Z., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 766-771 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torsional stress
torsion
Aging of materials
Precipitates
precipitates

Effect of number of grain on ductile fracture behavior of iron by molecular dynamics simulation

Hirashima, T., Aramaki, M., Munetoh, S. & Furukimi, O., Jan 1 2014, Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress. Lubben, T., Zoch, H-W. & Schneider, R. (eds.). Arbeitsgemeineschaft Warmebehandlung u. Werkstofftechnik, p. 477-479 3 p. (Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ductile fracture
Molecular dynamics
Iron
Computer simulation
Grain boundaries

Effect of tensile strain rate on ductile fracture energy for industrial pure iron

Nishimura, T., Aramaki, M., Munetoh, S., Ueji, R. & Furukimi, O., 2014, Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress. Arbeitsgemeineschaft Warmebehandlung u. Werkstofftechnik, p. 511-514 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fracture energy
Ductile fracture
Tensile strain
Strain rate
Iron

Newly developed additive for machinability enhancement of iron-based sintered steels

Nushiro, K., Maetani, T., Ono, T. & Ozaki, Y., Jan 1 2014, Euro PM 2014 Congress and Exhibition, Proceedings. European Powder Metallurgy Association (EPMA), (Euro PM 2014 Congress and Exhibition, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machinability
Steel
drilling
machining
Drilling
2013

Annealing time dependence on the phase equilibria and thermoelectric property of type-I Ba8Cu6Ag2Si38 clathrate

Bin, L., Makoto, S., Yuya, N., Takuya, O., Toshiko, O., Hideshi, M., Osamu, F. & Munetoh, S., Mar 20 2013, Engineered Technologies in Materials Science, Geotechnics, Environment and Mechanical Engineering. Vol. 310. p. 59-62 4 p. (Applied Mechanics and Materials; vol. 310).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase equilibria
Precipitates
Annealing
Transition metals
Grain boundaries

Formation of nanocrystalline Si by Au-catalyzed CH3SiH3 pulse jet CVD

Abe, T., Anan, S., Watanabe, F., Takahashi, R. & Ikoma, Y., Apr 10 2013, Advanced Materials Science and Technology. p. 244-247 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical vapor deposition
vapor deposition
pulses
agglomeration
Oxides

Influence on the hysteresis loss of iron powder cores from the strain induced during the compaction process

Takashita, T., Nakamura, N. & Ozaki, Y., Dec 18 2013, Advances in Powder Metallurgy and Particulate Materials - 2013, Proceedings of the 2013 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2013. p. 10140-10149 10 p. (Advances in Powder Metallurgy and Particulate Materials - 2013, Proceedings of the 2013 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iron powder
Coercive force
Hysteresis
Compaction
Annealing

Nanopore formation on SOI(100) by CH3SiH3 pulse jet CVD:SiC growth temperature dependence

Ikoma, Y., Nishino, Y., Anan, S., Abe, T. & Sakita, H., Apr 10 2013, Advanced Materials Science and Technology. p. 252-255 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanopores
SOI (semiconductors)
Growth temperature
Chemical vapor deposition
vapor deposition

Photo-electrochemical properties of titanium dioxide thin filmsprepared by reactive RF sputtering method

Arita, M., Tabata, Y., Sakamoto, H. & Guo, Q., Apr 10 2013, Advanced Materials Science and Technology. p. 248-251 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrochemical properties
titanium oxides
Titanium dioxide
Sputtering
sputtering

Properties of sintered compacts and heat-treated compacts after sintering made of low Cr prealloyed steel powder

Maetani, T., Unami, S., Ozaki, Y. & Yamanishi, Y., Jan 1 2013, International Powder Metallurgy Congress and Exhibition, Euro PM 2013. European Powder Metallurgy Association (EPMA), (International Powder Metallurgy Congress and Exhibition, Euro PM 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
automobiles
high strength
Powders
Automobiles

Three-dimensional characterization of BaZrO3 precipitates in Y1-xGdxBa2Cu3O7-y prepared by TFA-MOD using STEM-tomography

Nishiyama, T., Yamada, K., Teranishi, R., Kaneko, K., Kato, T., Izumi, T. & Shiohara, Y., Apr 10 2013, Advanced Materials Science and Technology. p. 48-51 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tomography
Precipitates
precipitates
tomography
Hastelloy (trademark)
2012
6 Citations (Scopus)

Absolute concentration measurement for hydrogen

Fukuoka, H., Jung, J., Inoue, M., Fujita, H. & Kato, Y., Jan 1 2012, WHEC 2012 Conference Proceedings - 19th World Hydrogen Energy Conference. Elsevier Ltd, p. 283-290 8 p. (Energy Procedia; vol. 29).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen
Acoustic wave velocity
Gases
Air
Ultrasonics
6 Citations (Scopus)

Effect of MnS on the cutting mechanism of powder metallurgy steel in cutting speeds ranging from 1 m/s to 150 m/s

Shinozuka, J., Yachi, H., Higashi, T., Sando, M., Maetani, T., Unami, S. & Ozaki, Y., Nov 26 2012, Advances in Abrasive Technology XV. p. 370-375 6 p. (Advanced Materials Research; vol. 565).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel powder metallurgy
Ductile fracture
Experiments
Electron probe microanalysis
Manganese

Fabrication of 4H-SiC/nanocrystalline diamond pn junctions

Amano, R., Goto, M., Kato, Y. & Tsutsui, K., May 28 2012, Silicon Carbide and Related Materials 2011, ICSCRM 2011. p. 1009-1012 4 p. (Materials Science Forum; vol. 717-720).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diamond
Diamonds
diamonds
Diamond films
rectification
2 Citations (Scopus)

Gas concentration measurment using ultrasonic

Fukuoka, H., Inoue, M., Kato, Y. & Fujita, H., Dec 1 2012, 1st IEEE Global Conference on Consumer Electronics 2012, GCCE 2012. p. 67-68 2 p. 6379951. (1st IEEE Global Conference on Consumer Electronics 2012, GCCE 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonics
Gases
Hydrogen
Oxygen
Acoustic waves
2 Citations (Scopus)

Single crystallization of Ba 8Al xSi 46-x clathrate by using the flux Czochralski method

Nakakohara, Y., Mugita, N., Nagatomo, Y., Saisho, M., Motooka, T., Teranishi, R. & Munetoh, S., Jan 1 2012, Energy Harvesting - Recent Advances in Materials, Devices and Applications. p. 131-135 5 p. (Materials Research Society Symposium Proceedings; vol. 1325).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crystal growth from melt
Czochralski method
clathrates
Crystallization
crystallization

Synthesizing and subsequent annealing of Si-based thermoelectric material Ba8AuxSi46-x clathrates

Liu, B., Saisho, M., Nagatomo, Y., Tajiri, M., Nakakohara, Y., Furukimi, O., Teranishi, R. & Munetoh, S., Dec 1 2012, Nanoscale Thermoelectrics 2012 - Materials and Transport Phenomena. p. 39-43 5 p. (Materials Research Society Symposium Proceedings; vol. 1456).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

thermoelectric materials
clathrates
Annealing
annealing
Seebeck coefficient
2011
2 Citations (Scopus)

Drilling machinability of iron-based sintered compacts with machinability aids

Maetani, T., Unami, S. & Ozaki, Y., Dec 1 2011, Advances in Powder Metallurgy and Particulate Materials - 2011, Proceedings of the 2011 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2011. p. 61-66 6 p. (Advances in Powder Metallurgy and Particulate Materials - 2011, Proceedings of the 2011 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machinability
drilling
Drilling
Iron
porosity

Fabrication of nanopores utilizing SiC/Si(001) heteroepitaxial growth on SOI substrates: Nanopore density control

Yahaya, H., Ikoma, Y., Kuriyama, K. & Motooka, T., Mar 30 2011, Seventh International Conference on Thin Film Physics and Applications. Vol. 7995. 799520

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanopore
Nanopores
SOI (semiconductors)
Epitaxial growth
Fabrication
3 Citations (Scopus)

Fabrication of n-type nanocrystalline diamond/3C-SiC/p-Si(001) junctions

Goto, M., Koga, A., Yamada, K., Kato, Y. & Tsutsui, K., Apr 28 2011, Silicon Carbide and Related Materials 2010. p. 524-527 4 p. (Materials Science Forum; vol. 679-680).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diamond
Diamonds
diamonds
Fabrication
fabrication

Photo-electrochemical properties of photocatalytic titanium dioxide films prepared by RF magnetron sputtering

Arita, M., Sakamoto, H., Tabata, Y., Ikoma, Y. & Masuda, M., Mar 2011, Proceedings of International colloquium on “Recent progress in nanofabrications of MEMS and NEMS: Science and innovation technologies”. p. 32-35

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Position-controlled formation of Si nanopores by chemical vapor deposition of SiC/SOI(100)

Ikoma, Y., Yahaya, H., Sakita, H., Nishino, Y. & Motooka, T., Mar 30 2011, Seventh International Conference on Thin Film Physics and Applications. 79951Y. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7995).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanopore
Silicon-on-insulator
Nanopores
Chemical Vapor Deposition
Silicon

Self-assembled DNA networks on Si(100) observed by contact-mode AFM

Chikazawa, T., Miyake, H., Ikoma, Y., Arita, M. & Motooka, T., Mar 2011, Proceedings of International colloquium on “Recent progress in nanofabrications of MEMS and NEMS: Science and innovation technologies”. p. 36-37

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010
10 Citations (Scopus)

Application of ultrasonic to a hydrogen sensor

Sonoyama, M., Kato, Y. & Fujita, H., Dec 1 2010, IEEE Sensors 2010 Conference, SENSORS 2010. p. 2141-2144 4 p. 5690522. (Proceedings of IEEE Sensors).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonics
Hydrogen
Sensors
Ultrasonic sensors
Acoustic wave velocity

Photo-electrochemical properties and photo-catalytic activities of titanium dioxide thin films prepared by RF magnetron sputtering method

Arita, M., Sakamoto, H., Tabata, Y., Ikoma, Y. & Masuda, M., Oct 2010, Proceedings of the 12th international symposium on material science and engineering between Kyushu University and Chonbuk National University. p. 31-37

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Properties of sintered compacts made of Ni-free pre-mixed powder based on low Mo prealloyed steel powder

Unami, S., Ozaki, Y. & Ono, T., Jan 1 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), (Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Powders
steels
Strengthening (metal)
Sintering
2009

Crystallization processes of amorphous Si during excimer laser annealing in complete-melting and near-complete-melting conditions: A molecular dynamics study

Ogata, T., Mitani, T., Munetoh, S. & Motooka, T., 2009, Materials Research Society Symposium Proceedings - Artificially Induced Grain Alignment in Thin Films. Vol. 1150. p. 179-183 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser annealing
Excimer lasers
Crystallization
excimer lasers
Molecular dynamics

Intensity-modulated excimer laser annealing to obtain (001) surface-oriented poly-si films on glass: Molecular dynamics study

Matsubara, N., Ogata, T., Mitani, T., Munetoh, S. & Motooka, T., Dec 1 2009, Materials Research Society Symposium Proceedings - Artificially Induced Grain Alignment in Thin Films. Vol. 1150. p. 173-178 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser annealing
Excimer lasers
Silicon
Polysilicon
excimer lasers
2008
2 Citations (Scopus)

Molecular-dynamics analysis of the structural properties of silica during cooling

Lee, B. M., Munetoh, S., Motooka, T., Yun, Y. W. & Lee, K. M., Jan 1 2008, Theory, Modeling and Numerical Simulation of Multi-Physics Materials Behavior. Murch, G. E., Soisson, F., Tikare, V. & Kang, J. K. (eds.). Trans Tech Publications Ltd, p. 101-106 6 p. (Solid State Phenomena; vol. 139).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon Dioxide
Dynamic analysis
Molecular dynamics
Structural properties
Silica
4 Citations (Scopus)

New approach to formation of nanopore on SOI: SiC/Si heteroepitaxial growth by supersonic jet CVD

Ikoma, Y., Ono, K., Uenuma, M., Ogata, T. & Motooka, T., Apr 21 2008, Sixth International Conference on Thin Film Physics and Applications. Vol. 6984. 69841V

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanopores
SOI (semiconductors)
Epitaxial growth
Chemical vapor deposition
vapor deposition

Thermoelectric high power generating module made by n-Ba8Al xSi46-x clathrate

Munetoh, S., Arita, M., Makiyama, H. & Motooka, T., 2008, Energy Harvesting-From Fundamentals to Devices. Vol. 1102. p. 7-12 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seebeck coefficient
Hooks
clathrates
Thermoelectric power
Open circuit voltage
2007

Controlling the nucleation site and crystal orientation during eximer-laser annealing processes in thin amorphous Si films on glass: A molecular-dynamics study

Motooka, T., Munetoh, S., Kishikawa, R., Mitani, T. & Ogata, T., Dec 1 2007, ECS Transactions - 2007 International Conference on Semiconductor Technology for Ultra Large Scale Integrated Circuits and Thin Film Transistors, ULSIC vs.TFT. 1 ed. p. 191-196 6 p. (ECS Transactions; vol. 8, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crystal orientation
Molecular dynamics
Nucleation
Annealing
Glass

Nucleation process during exclmer laser annealing of amorphous silicon thin films on glass: A molecular-dynamics study

Munetoh, S., Mitani, T., Kuranaga, T. & Motooka, T., Jul 4 2007, Group IV Semiconductor Nanostructures-2006. p. 159-164 6 p. (Materials Research Society Symposium Proceedings; vol. 958).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser annealing
Amorphous silicon
amorphous silicon
Molecular dynamics
Nucleation

Thermal conductivity and natural cooling rate of excimer-laser annealed Si: A molecular dynamics study

Lee, B. M., Seong, B. S., Baik, H. K., Munetoh, S. & Motooka, T., Jun 12 2007, Amorphous and Polycrystalline Thin-Film Silicon Science and Technology - 2006. Vol. 910. p. 111-116 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Excimer lasers
excimer lasers
Molecular dynamics
Thermal conductivity
thermal conductivity
2006

Cooling mechanism and structural change of local regions with a different cooling rate of excimer laser annealed Si

Lee, B. M., Seong, B. S., Kim, H. R., Munetoh, S. & Motooka, T., Dec 1 2006, Multiscale Modeling of Materials. Vol. 978. p. 225-230 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Excimer lasers
Silicon
excimer lasers
Cooling
cooling

Effect of 0-D artificial pinning centers on surface resistance of Er123 films

Mukaida, M., Saito, A., Kita, R., Horide, T., Matsumoto, K., Ichinose, A., Yoshida, Y., Horii, S., Teranishi, R., Yamada, K. & Mori, N., Jan 1 2006, Progress in Electromagnetics Research Symposium 2006, PIERS 2006 Tokyo. Electromagnetics Academy, p. 342-345 4 p. (Progress in Electromagnetics Research Symposium).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface resistance
Substitution reactions
Superconductivity
Pulsed laser deposition
Temperature
2 Citations (Scopus)

Experimental and numerical investigations of the die filling of iron powders

Ozaki, Y., Uenosono, S., Tagami, N., Kuwagi, K., Noda, R. & Horio, M., Dec 1 2006, Advances in Powder Metallurgy and Particulate Materials - 2006, Proceedings of the 2006 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2006. p. 335-346 12 p. (Advances in Powder Metallurgy and Particulate Materials - 2006, Proceedings of the 2006 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iron powder
Powders
iron
Water
Finite difference method

High-Jc processing for YBCO thick films by TFA-MOD method

Teranishi, R., Mori, N., Yamada, K., Mukaida, M., Shingai, Y., Matsuda, J., Nakaoka, K., Izumi, T. & Shiohara, Y., Jan 1 2006, Progress in Electromagnetics Research Symposium 2006, PIERS 2006 Tokyo. Electromagnetics Academy, p. 340-341 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crystallization
Thick films
Processing
Steam
Heating rate

Improvement of surface resistance property of ErBa2Cu3O7-Films with BaTiO3

Shingai, Y., Mukaida, M., Teranishi, R., Yamada, K., Mori, N., Ichinose, A., Kita, R., Horii, S., Yoshida, Y., Matsumoto, K., Abe, T. & Saito, A., Jan 1 2006, Progress in Electromagnetics Research Symposium 2006, PIERS 2006 Tokyo. Electromagnetics Academy, p. 475-476 2 p. (Progress in Electromagnetics Research Symposium).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface resistance
Gases
Nanorods
Precipitates
Doping (additives)

Impurity-doping effects on critical current properties in ErBa 2Cu3Oy films

Horii, S., Ichino, Y., Yoshida, Y., Matsumoto, K., Horide, T., Mukaida, M., Ichinose, A., Kita, R., Shimoyama, J. & Kishio, K., Dec 1 2006, Electroceramic Materials and Applications - Proceedings of the 6th Pacific Rim Conference on Ceramic and Glass Technology. p. 57-65 9 p. (Ceramic Transactions; vol. 196).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Critical currents
Doping (additives)
Impurities
Thin films
Temperature