Research Output 1980 2019

  • 70 Article
  • 31 Conference contribution
  • 16 Conference article
  • 1 Comment/debate
2019

Fatigue crack retrofitting by closing crack surface

YuanZhou, Z., Ji, B., Fu, Z., Kainuma, S. & Tsukamoto, S., Feb 1 2019, In : International Journal of Fatigue. 119, p. 229-237 9 p.

Research output: Contribution to journalArticle

Fatigue Crack
Surface Crack
Retrofitting
Cracks
Crack Propagation
1 Citation (Scopus)

Scalable Elasticoluminescent Strain Sensor for Precise Dynamic Stress Imaging and Onsite Infrastructure Diagnosis

Liu, L., Xu, C. N., Yoshida, A., Tu, D., Ueno, N. & Kainuma, S., Jan 1 2019, In : Advanced Materials Technologies. 4, 1, 1800336.

Research output: Contribution to journalArticle

Imaging techniques
Sensors
Structural health monitoring
Stress concentration
Inspection
2018

Alkali-Wrapped Concrete Prism Test (AW-CPT) - New testing protocol toward a performance test against alkali-silica reaction-

Kawabata, Y., Yamada, K., Sagawa, Y. & Ogawa, S., Sep 1 2018, In : Journal of Advanced Concrete Technology. 16, 9, p. 441-460 20 p.

Research output: Contribution to journalArticle

Alkalies
Prisms
Silicon Dioxide
Silica
Concretes
1 Citation (Scopus)

Bonding behavior of CFRP grid-concrete with PCM shotcrete

Guo, R., Pan, Y., Cai, L. & Hino, S., Aug 1 2018, In : Engineering Structures. 168, p. 333-345 13 p.

Research output: Contribution to journalArticle

Mortar
Carbon fibers
Cements
Concretes
Polymers

Corrosivity evaluation of steel members near the air-liquid interface using a ground corrosion sensor

Kainuma, S. & Yang, M., Jan 1 2018, Advances in Fracture and Damage Mechanics XVII. Aliabadi, F. M. H., Rodriguez-Tembleque, L. & Dominguez, J. (eds.). Trans Tech Publications Ltd, p. 619-624 6 p. (Key Engineering Materials; vol. 774 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Corrosion
Sensors
Liquids
Air
3 Citations (Scopus)

Effects of Soak Solution Type on Alkali Release from Volcanic Aggregates ? Is Alkali Release Really Responsible for Accelerating ASR Expansion? ?

Kawabata, Y., Yamada, K., Igarashi, G. & Sagawa, Y., Jan 1 2018, In : Journal of Advanced Concrete Technology. 16, 1, p. 61-74 14 p.

Research output: Contribution to journalArticle

Alkalies
Silicon Dioxide
Silica
Ions
Chemical analysis

Evaluation method for time-dependent corrosion depth of uncoated weathering steel using thickness of corrosion product layer

Kainuma, S., Yamamoto, Y., Ahn, J. H. & Jeong, Y. S., Jan 25 2018, In : Structural Engineering and Mechanics. 65, 2, p. 191-201 11 p.

Research output: Contribution to journalArticle

Weathering steel
Corrosion
Atmospheric corrosion
Steel structures
1 Citation (Scopus)

Fatigue Behavior Investigation and Stress Analysis for Rib-to-Deck Welded Joints in Orthotropic Steel Decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., Jun 1 2018, In : International Journal of Steel Structures. 18, 2, p. 512-527 16 p.

Research output: Contribution to journalArticle

Stress analysis
Welds
Fatigue of materials
Cracks
Crack initiation

Performance of pre-stressed concrete sheet pile after long-term exposure in the marine splash environments

Irmawaty, R., Yamamoto, D., Hamada, H. & Sagawa, Y., Jul 30 2018, In : MATEC Web of Conferences. 181, 11004.

Research output: Contribution to journalConference article

Prestressed concrete
Piles
Chlorides
Revetments
Caustics
3 Citations (Scopus)

Structural behavior of orthotropic steel decks with artificial cracks in longitudinal ribs

Yang, M., Kainuma, S. & Jeong, Y. S., Feb 1 2018, In : Journal of Constructional Steel Research. 141, p. 132-144 13 p.

Research output: Contribution to journalArticle

Steel
Welds
Cracks
Asphalt pavements
Welding
2017

An experimental study on mitigating alkali silica reaction by using lithium hydroxide monohydrate

Mohd, I., Sagawa, Y., Hamada, H. & Yamamoto, D., Nov 14 2017, Proceedings of the 3rd International Conference on Construction and Building Engineering, ICONBUILD 2017: Smart Construction Towards Global Challenges. American Institute of Physics Inc., Vol. 1903. 030005

Research output: Chapter in Book/Report/Conference proceedingConference contribution

lithium hydroxides
alkalies
silicon dioxide
andesite
expansion

Deterioration behaviors of overlapping layers between Al-5Mg alloy thermal spray coating and heavy-duty paint coating

Kainuma, S., Du, J., Yang, M., Muto, K. & Miyata, H., Jan 1 2017, Advances in Fracture and Damage Mechanics XVI - 16th FDM. Baragetti, S., Aliabadi, F. M. H., Mariano, P. M., Casavola, K. & Pappalettere, C. (eds.). Trans Tech Publications Ltd, p. 55-58 4 p. (Key Engineering Materials; vol. 754 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Paint
Deterioration
Coatings
Defects
Carbon steel
7 Citations (Scopus)

Deterioration progress and performance reduction of 40-year-old reinforced concrete beams in natural corrosion environments

Dasar, A., Hamada, H., Sagawa, Y. & Yamamoto, D., Sep 15 2017, In : Construction and Building Materials. 149, p. 690-704 15 p.

Research output: Contribution to journalArticle

Deterioration
Reinforced concrete
Corrosion
Steel
Tensile testing
2 Citations (Scopus)

Effect of water curing duration on strength behaviour of portland composite cement (PCC) mortar

Caronge, M. A., Tjaronge, M. W., Hamada, H. & Irmawaty, R., Dec 7 2017, In : IOP Conference Series: Materials Science and Engineering. 271, 1, 012018.

Research output: Contribution to journalConference article

Mortar
Curing
Cements
Water
Composite materials
10 Citations (Scopus)

Experimental investigation for structural parameter effects on fatigue behavior of rib-to-deck welded joints in orthotropic steel decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., Sep 1 2017, In : Engineering Failure Analysis. 79, p. 520-537 18 p.

Research output: Contribution to journalArticle

Steel
Welds
Fatigue of materials
Cracks
Tensile stress

Experimental study on anticorrosive effect of new developed sacrificial point anode method

Koda, M., Aoyama, T., Yamamoto, D. & Hamada, H., 2017, High Tech Concrete: Where Technology and Engineering Meet - Proceedings of the 2017 fib Symposium. Springer International Publishing, p. 2032-2040 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Anodes
Mortar
Steel
Corrosion
Anodic polarization
Seawater
Slags
Curing
Porosity
Concretes
4 Citations (Scopus)

Mechanoluminescent testing as an efficient inspection technique for the management of infrastructures

Yoshida, A., Liu, L., Tu, D., Kainuma, S. & Xu, C. N., Jun 1 2017, In : Journal of Disaster Research. 12, 3, p. 506-514 9 p.

Research output: Contribution to journalArticle

Triboluminescence
Inspection
Testing
Crack detection
Highway bridges
2016
Coal Ash
Silica fume
Alkalies
Fly ash
Silicon Dioxide
Chlorides
Concretes
Ions
Water
Cements
22 Citations (Scopus)

Experiment on fatigue behavior of rib-to-deck weld root in orthotropic steel decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., Mar 1 2016, In : Journal of Constructional Steel Research. 119, p. 113-122 10 p.

Research output: Contribution to journalArticle

Steel
Welds
Fatigue of materials
Experiments
Cracks

Fundamental study on anti-corrosive method with sacrificial anode for steel members using Al-Zn alloy casting plate and fiber sheet in atmospheric environment

Kainuma, S., Tsuchihashi, Y., Ishihara, S., Uchida, D., Kaneko, A. & Yamauchi, T., Jan 1 2016, In : Zairyo to Kankyo/ Corrosion Engineering. 65, 9, p. 390-397 8 p.

Research output: Contribution to journalArticle

Caustics
Steel
Anodes
Casting
Fibers
1 Citation (Scopus)

Influence of size and proximity of paint coating defects on corrosion behavior of carbon steel plates

Kainuma, S., Jeong, Y. S. & Kobayashi, J., Jan 1 2016, Advances in Fracture and Damage Mechanics XIV. Tonkovic, Z., Bajic, D. & Aliabadi, F. (eds.). Trans Tech Publications Ltd, p. 125-128 4 p. (Key Engineering Materials; vol. 665).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Paint
Carbon steel
Corrosion
Coatings
Defects

Parametric FE analysis for fatigue behavior of rib- To-deck welded joints in orthotropic steel decks

Yang, M., Kainuma, S., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., Jan 1 2016, IABSE Conference, Guangzhou 2016: Bridges and Structures Sustainability - Seeking Intelligent Solutions - Report. International Association for Bridge and Structural Engineering (IABSE), p. 264-268 5 p. (IABSE Conference, Guangzhou 2016: Bridges and Structures Sustainability - Seeking Intelligent Solutions - Report).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bridge decks
Welds
Fatigue of materials
Steel
Crack initiation

Practical method for estimating time-dependent corrosion depth of uncoated carbon steel plates under various atmospheric environmental conditions using fe/ag galvanic couple corrosion sensor

Kainuma, S., Yamamoto, Y. & Jeong, Y. S., Jan 1 2016, Advances in Fracture and Damage Mechanics XV. Toribio, J., Aliabadi, M. H. F., Mantič, V. & Sáez, A. (eds.). Trans Tech Publications Ltd, p. 187-190 4 p. (Key Engineering Materials; vol. 713).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atmospheric corrosion
Carbon steel
Rain
Salts
Corrosion
1 Citation (Scopus)

Prestress loss and bending capacity of pre-cracked 40 year-old PC beams exposed to marine environment

Dasar, A., Irmawaty, R., Hamada, H., Sagawa, Y. & Yamamoto, D., Apr 1 2016, In : MATEC Web of Conferences. 47, 02008.

Research output: Contribution to journalConference article

Cracks
Prestressed concrete
Tendons
Bending tests
Bearing capacity

Relationships between Imperfections and Shear Buckling Resistance in Web Plate with Sectional Damage Caused by Corrosion

Ahn, J. H., Kainuma, S., Lee, W. H., Jeong, Y. J. & Kim, I. T., Jan 1 2016, In : Advances in Materials Science and Engineering. 2016, 6467589.

Research output: Contribution to journalArticle

Buckling
Corrosion
Defects
Aspect ratio
Finite element method

Rubberized concrete durability against abrasion

Md Noor, N., Yamamoto, D., Hamada, H. & Sagawa, Y., Apr 1 2016, In : MATEC Web of Conferences. 47, 01006.

Research output: Contribution to journalConference article

Abrasion
Durability
Concretes
Silica fume
Rubber
2 Citations (Scopus)

Study on chloride ion penetration resistance of rubberized concrete under steady state condition

Noor, N. M., Yamamoto, D., Hamada, H. & Sagawa, Y., Apr 1 2016, In : MATEC Web of Conferences. 47, 01004.

Research output: Contribution to journalConference article

Chlorides
Concretes
Ions
Compressive strength
Cements

Study on large-scale repair plan of the Kanmon Bridge (a Long-Span Expressway Suspension Bridge)

Hino, S., Ogata, T., Nishiyama, S., Imamura, T., Maeda, Y. & Yoshida, T., Jan 1 2016, IABSE Congress Stockholm, 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment. International Association for Bridge and Structural Engineering (IABSE), p. 1501-1508 8 p. (IABSE Congress Stockholm, 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Suspension bridges
Stringers
Repair
Bearings (structural)
Deterioration
7 Citations (Scopus)

Welding residual stress in roots between deck plate and U-rib in orthotropic steel decks

Kainuma, S., Jeong, Y. S., Yang, M. & Inokuchi, S., Oct 1 2016, In : Measurement: Journal of the International Measurement Confederation. 92, p. 475-482 8 p.

Research output: Contribution to journalArticle

welding
residual stress
Residual stresses
Welding
Welds
2015

An experimental study on relationship between chloride content in mortar and passivity condition of embedded steel bar

Hamada, H., Yamamoto, D., Sagawa, Y. & Ikeda, T., Jan 1 2015, Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management - Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014. CRC Press/Balkema, p. 1479-1484 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mortar
Polarization
Steel corrosion
Steel
Cements
3 Citations (Scopus)

Application of sacrificial point anode for prevention of steel corrosion in cracked concrete

Caronge, M. A., Hamada, H., Irmawaty, R., Sagawa, Y. & Yamamoto, D., Oct 1 2015, In : Journal of Advanced Concrete Technology. 13, 10, p. 465-478 14 p.

Research output: Contribution to journalArticle

Steel corrosion
Steel
Anodes
Concretes
Corrosion
8 Citations (Scopus)

Behavior and stress of orthotropic deck with bulb rib by surface corrosion

Kainuma, S., Jeong, Y. S., Ahn, J. H., Yamagami, T. & Tsukamoto, S., Jun 22 2015, In : Journal of Constructional Steel Research. 113, p. 135-145 11 p., 4239.

Research output: Contribution to journalArticle

Steel
Corrosion
Asphalt pavements
Bridge decks
Crack initiation

Bonding behavior of interface between CFRP strand sheet and concrete with various types of adhesive

Bahsuan, R., Hino, S. & Yamaguchi, K., Jul 31 2015, In : Memoirs of the Faculty of Engineering, Kyushu University. 75, 1, p. 1-15 15 p.

Research output: Contribution to journalArticle

Plastic sheets
Carbon fiber reinforced plastics
Adhesives
plastic
Concretes
2 Citations (Scopus)

Corrosion of steel bars in concrete with the variation of microstructure of steel-concrete interface

Mohammed, T. U., Hamada, H., Hasnat, A. & Al Mamun, M. A., Jan 1 2015, In : Journal of Advanced Concrete Technology. 13, 4, p. 230-240 11 p.

Research output: Contribution to journalArticle

Steel
Concretes
Corrosion
Microstructure
Cements

Corrosion resistant property of stainless steel bars in concrete under marine environment

Yamaji, T., Hamada, H., Mizuma, S. & Okabe, T., 2015, Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management - Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014. CRC Press/Balkema, p. 1524-1531 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless steel
Concretes
Corrosion
Cracks
Carbon steel
5 Citations (Scopus)

Effect of crumb rubber on concrete strength and chloride ion penetration resistance

Noor, N. M., Hamada, H., Sagawa, Y. & Yamamoto, D., Jan 1 2015, In : Jurnal Teknologi. 77, 32, p. 171-178 8 p.

Research output: Contribution to journalArticle

Rubber
Concretes
Ions
Silica fume
Saline water
2 Citations (Scopus)

Evaluation of structural responses on artificial fatigue crack for bulb rib orthotropic deck

Kainuma, S., Ahn, J. H., Jeong, Y. S., Sugiyama, H. & Iwasaki, M., Jan 1 2015, In : Advances in Structural Engineering. 18, 9, p. 1355-1370 16 p.

Research output: Contribution to journalArticle

Steel
Welds
Cyclic loads
Fatigue cracks
Stress concentration

Fatigue behaviour of out-of-plane gusset joints with one-side fillet weld

Kainuma, S., To, K., Uchida, D., Yagi, N. & Kubo, H., Dec 2 2015, In : Welding International. 29, 12, p. 913-921 9 p.

Research output: Contribution to journalArticle

Welds
Fatigue of materials
Crack initiation
Residual stresses
Welding
2 Citations (Scopus)

Stress distribution on the real corrosion surface of the orthotopic steel bridge deck

Kainuma, S., Jeong, Y. S. & Ahn, J. H., Jun 1 2015, In : Steel and Composite Structures. 18, 6, p. 1479-1492 14 p.

Research output: Contribution to journalArticle

Steel bridges
Bridge decks
Stress concentration
Corrosion
Fatigue of materials
1 Citation (Scopus)

The basic research of the coated steel plate about the relationship between the coating durability and the characteristics of the rust

Sakamoto, T., Kainuma, S. & Kobayashi, J., Jan 1 2015, In : Zairyo to Kankyo/ Corrosion Engineering. 64, 7, p. 307-310 4 p.

Research output: Contribution to journalArticle

Steel
Painting
Durability
Corrosion
Coatings
2014

Applicability and structural response for bearing system replacement in suspension bridge rehabilitation

Kainuma, S., Ahn, J. H., Jeong, Y. S., Imamura, T. & Matsuda, T., Apr 1 2014, In : Journal of Constructional Steel Research. 95, p. 172-190 19 p.

Research output: Contribution to journalArticle

Bearings (structural)
Suspension bridges
Patient rehabilitation
Fatigue of materials
Stringers
6 Citations (Scopus)

CPT as an evaluation method of concrete mixture for ASR expansion

Yamada, K., Karasuda, S., Ogawa, S., Sagawa, Y., Osako, M., Hamada, H. & Isneini, M., Aug 14 2014, In : Construction and Building Materials. 64, p. 184-191 8 p.

Research output: Contribution to journalArticle

Concrete mixtures
Prisms
Concretes
Leaching
Curing

Fundamental study on corrosion protection effect with sacrificial anode for corroded steel members using porous sintered plate and fiber sheet in an atmospheric environment

Ishihara, S., Kainuma, S., Kinoshita, M., Uchida, D., Kaneko, A. & Yamauchi, T., Jan 1 2014, In : Zairyo to Kankyo/ Corrosion Engineering. 63, 12, p. 609-615 7 p.

Research output: Contribution to journalArticle

Steel
Corrosion protection
Anodes
Corrosion
Fibers
13 Citations (Scopus)

Influence of fiber reinforcement on strength and toughness of all-lightweight concrete

Choi, J., Zi, G., Hino, S., Yamaguchi, K. & Kim, S., Oct 30 2014, In : Construction and Building Materials. 69, p. 381-389 9 p.

Research output: Contribution to journalArticle

Fiber reinforced materials
Toughness
Concretes
Steel fibers
Bending strength
5 Citations (Scopus)

Investigation on the stress concentration effect at the corroded surface achieved by atmospheric exposure test

Kainuma, S., Jeong, Y. S. & Ahn, J. H., Apr 25 2014, In : Materials Science and Engineering A. 602, p. 89-97 9 p.

Research output: Contribution to journalArticle

stress concentration
Stress concentration
paints
Paint
corrosion
5 Citations (Scopus)

Mechanical behavior of the U-anchor of super-CFRP rod under tensile loading

Djamaluddin, R., Yamaguchi, K. & Hino, S., Jan 1 2014, In : Journal of Composite Materials. 48, 15, p. 1875-1885 11 p.

Research output: Contribution to journalArticle

Carbon fiber reinforced plastics
Anchors
Tendons
Concretes
Stress concentration
1 Citation (Scopus)

Practical method for estimating corrosion depth of uncoated carbon steel using thickness of the corrosion-product layer

Kainuma, S., Yamamoto, Y., Hayashi, H. & Itoh, Y., Jan 1 2014, Advances in Fracture and Damage Mechanics XII. p. 201-204 4 p. (Key Engineering Materials; vol. 577-578).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon steel
Corrosion
Caustics
Steel
Steel structures
2 Citations (Scopus)
Carbon steel
Corrosion
Sensors
Steel
Rain