Research Output 1980 2019

  • 70 Article
  • 31 Conference contribution
  • 16 Conference article
  • 1 Comment/debate
Filter
Conference contribution
2018

Corrosivity evaluation of steel members near the air-liquid interface using a ground corrosion sensor

Kainuma, S. & Yang, M., Jan 1 2018, Advances in Fracture and Damage Mechanics XVII. Aliabadi, F. M. H., Rodriguez-Tembleque, L. & Dominguez, J. (eds.). Trans Tech Publications Ltd, p. 619-624 6 p. (Key Engineering Materials; vol. 774 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Corrosion
Sensors
Liquids
Air
2017

An experimental study on mitigating alkali silica reaction by using lithium hydroxide monohydrate

Mohd, I., Sagawa, Y., Hamada, H. & Yamamoto, D., Nov 14 2017, Proceedings of the 3rd International Conference on Construction and Building Engineering, ICONBUILD 2017: Smart Construction Towards Global Challenges. American Institute of Physics Inc., Vol. 1903. 030005

Research output: Chapter in Book/Report/Conference proceedingConference contribution

lithium hydroxides
alkalies
silicon dioxide
andesite
expansion

Deterioration behaviors of overlapping layers between Al-5Mg alloy thermal spray coating and heavy-duty paint coating

Kainuma, S., Du, J., Yang, M., Muto, K. & Miyata, H., Jan 1 2017, Advances in Fracture and Damage Mechanics XVI - 16th FDM. Baragetti, S., Aliabadi, F. M. H., Mariano, P. M., Casavola, K. & Pappalettere, C. (eds.). Trans Tech Publications Ltd, p. 55-58 4 p. (Key Engineering Materials; vol. 754 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Paint
Deterioration
Coatings
Defects
Carbon steel

Experimental study on anticorrosive effect of new developed sacrificial point anode method

Koda, M., Aoyama, T., Yamamoto, D. & Hamada, H., 2017, High Tech Concrete: Where Technology and Engineering Meet - Proceedings of the 2017 fib Symposium. Springer International Publishing, p. 2032-2040 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Anodes
Mortar
Steel
Corrosion
Anodic polarization
2016
1 Citation (Scopus)

Influence of size and proximity of paint coating defects on corrosion behavior of carbon steel plates

Kainuma, S., Jeong, Y. S. & Kobayashi, J., Jan 1 2016, Advances in Fracture and Damage Mechanics XIV. Tonkovic, Z., Bajic, D. & Aliabadi, F. (eds.). Trans Tech Publications Ltd, p. 125-128 4 p. (Key Engineering Materials; vol. 665).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Paint
Carbon steel
Corrosion
Coatings
Defects

Parametric FE analysis for fatigue behavior of rib- To-deck welded joints in orthotropic steel decks

Yang, M., Kainuma, S., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., Jan 1 2016, IABSE Conference, Guangzhou 2016: Bridges and Structures Sustainability - Seeking Intelligent Solutions - Report. International Association for Bridge and Structural Engineering (IABSE), p. 264-268 5 p. (IABSE Conference, Guangzhou 2016: Bridges and Structures Sustainability - Seeking Intelligent Solutions - Report).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bridge decks
Welds
Fatigue of materials
Steel
Crack initiation

Practical method for estimating time-dependent corrosion depth of uncoated carbon steel plates under various atmospheric environmental conditions using fe/ag galvanic couple corrosion sensor

Kainuma, S., Yamamoto, Y. & Jeong, Y. S., Jan 1 2016, Advances in Fracture and Damage Mechanics XV. Toribio, J., Aliabadi, M. H. F., Mantič, V. & Sáez, A. (eds.). Trans Tech Publications Ltd, p. 187-190 4 p. (Key Engineering Materials; vol. 713).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atmospheric corrosion
Carbon steel
Rain
Salts
Corrosion

Study on large-scale repair plan of the Kanmon Bridge (a Long-Span Expressway Suspension Bridge)

Hino, S., Ogata, T., Nishiyama, S., Imamura, T., Maeda, Y. & Yoshida, T., Jan 1 2016, IABSE Congress Stockholm, 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment. International Association for Bridge and Structural Engineering (IABSE), p. 1501-1508 8 p. (IABSE Congress Stockholm, 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Suspension bridges
Stringers
Repair
Bearings (structural)
Deterioration
2015

An experimental study on relationship between chloride content in mortar and passivity condition of embedded steel bar

Hamada, H., Yamamoto, D., Sagawa, Y. & Ikeda, T., Jan 1 2015, Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management - Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014. CRC Press/Balkema, p. 1479-1484 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mortar
Polarization
Steel corrosion
Steel
Cements

Corrosion resistant property of stainless steel bars in concrete under marine environment

Yamaji, T., Hamada, H., Mizuma, S. & Okabe, T., 2015, Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management - Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014. CRC Press/Balkema, p. 1524-1531 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless steel
Concretes
Corrosion
Cracks
Carbon steel
2014
1 Citation (Scopus)

Practical method for estimating corrosion depth of uncoated carbon steel using thickness of the corrosion-product layer

Kainuma, S., Yamamoto, Y., Hayashi, H. & Itoh, Y., Jan 1 2014, Advances in Fracture and Damage Mechanics XII. p. 201-204 4 p. (Key Engineering Materials; vol. 577-578).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon steel
Corrosion
Caustics
Steel
Steel structures
2013

Assessment of shear behaviors of a web panel with free lower boundary

Ahn, J. H., Kainuma, S., Kim, I. T. & Jeong, Y. S., Jun 3 2013, Advances in Applied Materials and Electronics Engineering II. p. 120-124 5 p. (Advanced Materials Research; vol. 684).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Buckling
Boundary conditions
Corrosion
Failure modes
Aspect ratio

Assessment of the corrosion characteristics of the carbon steel under different atmospheric environments

Jeong, Y. S., Kainuma, S. & Ahn, J. H., Jun 3 2013, Advances in Applied Materials and Electronics Engineering II. p. 116-119 4 p. (Advanced Materials Research; vol. 684).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon steel
Corrosion
Atmospheric corrosion
Steel structures

Corrosion pattern for critical shear buckling load of a web panel with local corrosion damage

Kainuma, S., Ahn, J. H. & Kim, I. T., Oct 29 2013, Information Technology for Manufacturing Systems IV. p. 778-783 6 p. (Applied Mechanics and Materials; vol. 421).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Buckling
Corrosion
Plate girder bridges
2012

Spatial statistical analyses for time-dependent corroded surfaces of uncoated weathering steel plates in various corrosive environments

Kainuma, S. & Jeong, Y. S., Jan 1 2012, Advances in Fracture and Damage Mechanics X. p. 57-60 4 p. (Key Engineering Materials; vol. 488-489).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Weathering steel
Caustics
Corrosion
Steel
Steel structures
2011

Applicability of an ACM type corrosion sensor to evaluations of corrosive environments in gas piping

Ito, Y. & Kainuma, S., 2011, European Corrosion Congress 2011, EUROCORR 2011. Vol. 4. p. 3290-3295 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atmospheric corrosion
Caustics
Steel
monitors
corrosion

Evaluation of atmospheric environment and time-dependent corrosion depth for unpainted carbon steel using Zn/Ag ACM corrosion sensor

Ito, Y. & Kainuma, S., 2011, 18th International Corrosion Congress 2011. Vol. 1. p. 659-664 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atmospheric corrosion
carbon steels
Carbon steel
monitors
corrosion

Experimental analysis of shear behavior of oval perfobond connector

Zhao, C., Liu, Y., Zheng, S., Hino, S. & Yamaguchi, K., Sep 30 2011, ICTE 2011 - Proceedings of the 3rd International Conference on Transportation Engineering. p. 1983-1988 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Concretes
2010
1 Citation (Scopus)

Detailed investigation of 38 year old concrete sewerage pipes deteriorated by sulphuric acid attack

Yamamoto, D., Matsushita, H., Sekino, I. & Hamada, H., 2010, Advances in Concrete Structural Durability - Proceedings of the 2nd International Conference on Durability of Concrete Structures, ICDCS 2010. Hokkaido University Press, p. 557-566 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pipe
Concretes
Deterioration
Acids
Drainage

Effect of exposure environment and period on chloride diffusion in concrete with inhibitor

Yamaji, T., Akira, Y. & Hamada, H., 2010, Advances in Concrete Structural Durability - Proceedings of the 2nd International Conference on Durability of Concrete Structures, ICDCS 2010. Hokkaido University Press, p. 311-319 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Concretes
Ions
Deterioration

Evaluation on chloride diffusion coefficient of blast-furance slag cement concrete

Gao, M., Hamada, H., Sagawa, Y. & Ikeda, T., 2010, Advances in Concrete Structural Durability - Proceedings of the 2nd International Conference on Durability of Concrete Structures, ICDCS 2010. Hokkaido University Press, p. 243-248 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Slag cement
Slags
Curing
Concretes
Durability

Mitigating effect of fly ash on the asr-related expansion of mortar using reactive aggregate at the pessimum proportion

Ikeda, T., Kawabata, Y., Hamada, H. & Yamada, K., Jan 1 2010, Advances in Concrete Structural Durability - Proceedings of the 2nd International Conference on Durability of Concrete Structures, ICDCS 2010. Hokkaido University Press, p. 473-482 10 p. (Advances in Concrete Structural Durability - Proceedings of the 2nd International Conference on Durability of Concrete Structures, ICDCS 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mortar
Fly ash
Concretes

New generation water-reducing admixture for concrete

Khatib, J. M., Mohammed, T. U., Zhang, J. S. & Hamada, H., 2010, 2nd International Conference on Sustainable Construction Materials and Technologies. p. 939-947 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Concretes
Water
Concrete mixtures
Prisms
Compressive strength

Recycling of concrete made with brick aggregate

Uddin, M. T., Khan, M. F. A., Kabir, M. R., Awal, M. A., Al Mahbub, A., Hamada, H. & Khatib, J. M., Dec 1 2010, 2nd International Conference on Sustainable Construction Materials and Technologies. p. 949-959 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Brick
Recycling
Concretes
Concrete aggregates
Concrete blocks
4 Citations (Scopus)

Several factors affecting the anodic polarization curve of steel bars embedded in mortar

Hamada, H., Sagawa, Y., Ikeda, T. & Morikawa, R., 2010, Concrete under Severe Conditions: Environment and Loading - Proceedings of the 6th International Conference on Concrete under Severe Conditions, CONSEC'10. Vol. 1. p. 201-208 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Anodic polarization
Mortar
Polarization
Steel
Sensors

Spatial statistical analyses simulation for time-dependent corroded surfaces of carbon steel plates in various corrosive environments

Kainuma, S., Mukaigawa, Y., Itoh, Y., Jeong, Y. & Kim, I. T., Jan 1 2010, Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010. Zingoni, A. (ed.). CRC Press/Balkema, p. 387-390 4 p. (Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon steel
Corrosion
Steel structures
Steel
Sensors
2008

A study on the super composite slab bridge of taxiway designed for hypothetical aircraft load

Tomoda, T., Hino, S., Yamaguchi, K., Guo, S., Iwasaki, Y. & Oosiro, S., Dec 1 2008, EASEC-11 - Eleventh East Asia-Pacific Conference on Structural Engineering and Construction.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aircraft
Air traffic control
Composite materials
Airports
Bridge clearances

Corrosion and fatigue behaviors of steel plates at the boundary with concrete

Kim, I. T., Kainuma, S. & Hosomi, N., 2008, Proceedings of the 4th International Structural Engineering and Construction Conference, ISEC-4 - Innovations in Structural Engineering and Construction. Vol. 1. p. 135-139 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Concretes
Corrosion
Steel
Concrete blocks
2 Citations (Scopus)

Research on the stress transfer mechanisms of joint structures in hybrid truss bridges

Sato, Y., Hino, S. I., Yamaguchi, K., Won, D. Y. & Bong, C. S., Dec 1 2008, EASEC-11 - Eleventh East Asia-Pacific Conference on Structural Engineering and Construction.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Concrete slabs
Steel
Composite structures
Concretes
Finite element method

Study on strength of the connection between pultruded GFRP and steel plates using adhesively bonded and bolted joint

Kobayashi, K., Hino, S., Yamaguchi, K. & Ohmoto, T., 2008, EASEC-11 - Eleventh East Asia-Pacific Conference on Structural Engineering and Construction.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bolted joints
Glass fibers
Steel
Polymers
Corrosion resistance
1997

Effective prestress and creep behavior in two-way prestressed steel plate-concrete composite slabs

Ohta, T., Hino, S., Kohno, N. & Shinnishi, N., 1997, Proceedings of the Engineering Foundation Conference. Buckner, C. D. & Shahrooz, B. M. (eds.). ASCE, p. 186-196 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Creep
Prestressing
Concretes
Steel
Composite materials