Research Output 1980 2019

  • 70 Article
  • 31 Conference contribution
  • 16 Conference article
  • 1 Comment/debate
Filter
Article
2019

Fatigue crack retrofitting by closing crack surface

YuanZhou, Z., Ji, B., Fu, Z., Kainuma, S. & Tsukamoto, S., Feb 1 2019, In : International Journal of Fatigue. 119, p. 229-237 9 p.

Research output: Contribution to journalArticle

Fatigue Crack
Surface Crack
Retrofitting
Cracks
Crack Propagation
1 Citation (Scopus)

Scalable Elasticoluminescent Strain Sensor for Precise Dynamic Stress Imaging and Onsite Infrastructure Diagnosis

Liu, L., Xu, C. N., Yoshida, A., Tu, D., Ueno, N. & Kainuma, S., Jan 1 2019, In : Advanced Materials Technologies. 4, 1, 1800336.

Research output: Contribution to journalArticle

Imaging techniques
Sensors
Structural health monitoring
Stress concentration
Inspection
2018

Alkali-Wrapped Concrete Prism Test (AW-CPT) - New testing protocol toward a performance test against alkali-silica reaction-

Kawabata, Y., Yamada, K., Sagawa, Y. & Ogawa, S., Sep 1 2018, In : Journal of Advanced Concrete Technology. 16, 9, p. 441-460 20 p.

Research output: Contribution to journalArticle

Alkalies
Prisms
Silicon Dioxide
Silica
Concretes
1 Citation (Scopus)

Bonding behavior of CFRP grid-concrete with PCM shotcrete

Guo, R., Pan, Y., Cai, L. & Hino, S., Aug 1 2018, In : Engineering Structures. 168, p. 333-345 13 p.

Research output: Contribution to journalArticle

Mortar
Carbon fibers
Cements
Concretes
Polymers
3 Citations (Scopus)

Effects of Soak Solution Type on Alkali Release from Volcanic Aggregates ? Is Alkali Release Really Responsible for Accelerating ASR Expansion? ?

Kawabata, Y., Yamada, K., Igarashi, G. & Sagawa, Y., Jan 1 2018, In : Journal of Advanced Concrete Technology. 16, 1, p. 61-74 14 p.

Research output: Contribution to journalArticle

Alkalies
Silicon Dioxide
Silica
Ions
Chemical analysis

Evaluation method for time-dependent corrosion depth of uncoated weathering steel using thickness of corrosion product layer

Kainuma, S., Yamamoto, Y., Ahn, J. H. & Jeong, Y. S., Jan 25 2018, In : Structural Engineering and Mechanics. 65, 2, p. 191-201 11 p.

Research output: Contribution to journalArticle

Weathering steel
Corrosion
Atmospheric corrosion
Steel structures
1 Citation (Scopus)

Fatigue Behavior Investigation and Stress Analysis for Rib-to-Deck Welded Joints in Orthotropic Steel Decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., Jun 1 2018, In : International Journal of Steel Structures. 18, 2, p. 512-527 16 p.

Research output: Contribution to journalArticle

Stress analysis
Welds
Fatigue of materials
Cracks
Crack initiation
3 Citations (Scopus)

Structural behavior of orthotropic steel decks with artificial cracks in longitudinal ribs

Yang, M., Kainuma, S. & Jeong, Y. S., Feb 1 2018, In : Journal of Constructional Steel Research. 141, p. 132-144 13 p.

Research output: Contribution to journalArticle

Steel
Welds
Cracks
Asphalt pavements
Welding
2017
7 Citations (Scopus)

Deterioration progress and performance reduction of 40-year-old reinforced concrete beams in natural corrosion environments

Dasar, A., Hamada, H., Sagawa, Y. & Yamamoto, D., Sep 15 2017, In : Construction and Building Materials. 149, p. 690-704 15 p.

Research output: Contribution to journalArticle

Deterioration
Reinforced concrete
Corrosion
Steel
Tensile testing
10 Citations (Scopus)

Experimental investigation for structural parameter effects on fatigue behavior of rib-to-deck welded joints in orthotropic steel decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., Sep 1 2017, In : Engineering Failure Analysis. 79, p. 520-537 18 p.

Research output: Contribution to journalArticle

Steel
Welds
Fatigue of materials
Cracks
Tensile stress
4 Citations (Scopus)

Mechanoluminescent testing as an efficient inspection technique for the management of infrastructures

Yoshida, A., Liu, L., Tu, D., Kainuma, S. & Xu, C. N., Jun 1 2017, In : Journal of Disaster Research. 12, 3, p. 506-514 9 p.

Research output: Contribution to journalArticle

Triboluminescence
Inspection
Testing
Crack detection
Highway bridges
2016
22 Citations (Scopus)

Experiment on fatigue behavior of rib-to-deck weld root in orthotropic steel decks

Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. & Uchida, D., Mar 1 2016, In : Journal of Constructional Steel Research. 119, p. 113-122 10 p.

Research output: Contribution to journalArticle

Steel
Welds
Fatigue of materials
Experiments
Cracks

Fundamental study on anti-corrosive method with sacrificial anode for steel members using Al-Zn alloy casting plate and fiber sheet in atmospheric environment

Kainuma, S., Tsuchihashi, Y., Ishihara, S., Uchida, D., Kaneko, A. & Yamauchi, T., Jan 1 2016, In : Zairyo to Kankyo/ Corrosion Engineering. 65, 9, p. 390-397 8 p.

Research output: Contribution to journalArticle

Caustics
Steel
Anodes
Casting
Fibers

Relationships between Imperfections and Shear Buckling Resistance in Web Plate with Sectional Damage Caused by Corrosion

Ahn, J. H., Kainuma, S., Lee, W. H., Jeong, Y. J. & Kim, I. T., Jan 1 2016, In : Advances in Materials Science and Engineering. 2016, 6467589.

Research output: Contribution to journalArticle

Buckling
Corrosion
Defects
Aspect ratio
Finite element method
7 Citations (Scopus)

Welding residual stress in roots between deck plate and U-rib in orthotropic steel decks

Kainuma, S., Jeong, Y. S., Yang, M. & Inokuchi, S., Oct 1 2016, In : Measurement: Journal of the International Measurement Confederation. 92, p. 475-482 8 p.

Research output: Contribution to journalArticle

welding
residual stress
Residual stresses
Welding
Welds
2015
3 Citations (Scopus)

Application of sacrificial point anode for prevention of steel corrosion in cracked concrete

Caronge, M. A., Hamada, H., Irmawaty, R., Sagawa, Y. & Yamamoto, D., Oct 1 2015, In : Journal of Advanced Concrete Technology. 13, 10, p. 465-478 14 p.

Research output: Contribution to journalArticle

Steel corrosion
Steel
Anodes
Concretes
Corrosion
8 Citations (Scopus)

Behavior and stress of orthotropic deck with bulb rib by surface corrosion

Kainuma, S., Jeong, Y. S., Ahn, J. H., Yamagami, T. & Tsukamoto, S., Jun 22 2015, In : Journal of Constructional Steel Research. 113, p. 135-145 11 p., 4239.

Research output: Contribution to journalArticle

Steel
Corrosion
Asphalt pavements
Bridge decks
Crack initiation

Bonding behavior of interface between CFRP strand sheet and concrete with various types of adhesive

Bahsuan, R., Hino, S. & Yamaguchi, K., Jul 31 2015, In : Memoirs of the Faculty of Engineering, Kyushu University. 75, 1, p. 1-15 15 p.

Research output: Contribution to journalArticle

Plastic sheets
Carbon fiber reinforced plastics
Adhesives
plastic
Concretes
2 Citations (Scopus)

Corrosion of steel bars in concrete with the variation of microstructure of steel-concrete interface

Mohammed, T. U., Hamada, H., Hasnat, A. & Al Mamun, M. A., Jan 1 2015, In : Journal of Advanced Concrete Technology. 13, 4, p. 230-240 11 p.

Research output: Contribution to journalArticle

Steel
Concretes
Corrosion
Microstructure
Cements
5 Citations (Scopus)

Effect of crumb rubber on concrete strength and chloride ion penetration resistance

Noor, N. M., Hamada, H., Sagawa, Y. & Yamamoto, D., Jan 1 2015, In : Jurnal Teknologi. 77, 32, p. 171-178 8 p.

Research output: Contribution to journalArticle

Rubber
Concretes
Ions
Silica fume
Saline water
2 Citations (Scopus)

Evaluation of structural responses on artificial fatigue crack for bulb rib orthotropic deck

Kainuma, S., Ahn, J. H., Jeong, Y. S., Sugiyama, H. & Iwasaki, M., Jan 1 2015, In : Advances in Structural Engineering. 18, 9, p. 1355-1370 16 p.

Research output: Contribution to journalArticle

Steel
Welds
Cyclic loads
Fatigue cracks
Stress concentration

Fatigue behaviour of out-of-plane gusset joints with one-side fillet weld

Kainuma, S., To, K., Uchida, D., Yagi, N. & Kubo, H., Dec 2 2015, In : Welding International. 29, 12, p. 913-921 9 p.

Research output: Contribution to journalArticle

Welds
Fatigue of materials
Crack initiation
Residual stresses
Welding
2 Citations (Scopus)

Stress distribution on the real corrosion surface of the orthotopic steel bridge deck

Kainuma, S., Jeong, Y. S. & Ahn, J. H., Jun 1 2015, In : Steel and Composite Structures. 18, 6, p. 1479-1492 14 p.

Research output: Contribution to journalArticle

Steel bridges
Bridge decks
Stress concentration
Corrosion
Fatigue of materials
1 Citation (Scopus)

The basic research of the coated steel plate about the relationship between the coating durability and the characteristics of the rust

Sakamoto, T., Kainuma, S. & Kobayashi, J., Jan 1 2015, In : Zairyo to Kankyo/ Corrosion Engineering. 64, 7, p. 307-310 4 p.

Research output: Contribution to journalArticle

Steel
Painting
Durability
Corrosion
Coatings
2014

Applicability and structural response for bearing system replacement in suspension bridge rehabilitation

Kainuma, S., Ahn, J. H., Jeong, Y. S., Imamura, T. & Matsuda, T., Apr 1 2014, In : Journal of Constructional Steel Research. 95, p. 172-190 19 p.

Research output: Contribution to journalArticle

Bearings (structural)
Suspension bridges
Patient rehabilitation
Fatigue of materials
Stringers
6 Citations (Scopus)

CPT as an evaluation method of concrete mixture for ASR expansion

Yamada, K., Karasuda, S., Ogawa, S., Sagawa, Y., Osako, M., Hamada, H. & Isneini, M., Aug 14 2014, In : Construction and Building Materials. 64, p. 184-191 8 p.

Research output: Contribution to journalArticle

Concrete mixtures
Prisms
Concretes
Leaching
Curing

Fundamental study on corrosion protection effect with sacrificial anode for corroded steel members using porous sintered plate and fiber sheet in an atmospheric environment

Ishihara, S., Kainuma, S., Kinoshita, M., Uchida, D., Kaneko, A. & Yamauchi, T., Jan 1 2014, In : Zairyo to Kankyo/ Corrosion Engineering. 63, 12, p. 609-615 7 p.

Research output: Contribution to journalArticle

Steel
Corrosion protection
Anodes
Corrosion
Fibers
13 Citations (Scopus)

Influence of fiber reinforcement on strength and toughness of all-lightweight concrete

Choi, J., Zi, G., Hino, S., Yamaguchi, K. & Kim, S., Oct 30 2014, In : Construction and Building Materials. 69, p. 381-389 9 p.

Research output: Contribution to journalArticle

Fiber reinforced materials
Toughness
Concretes
Steel fibers
Bending strength
5 Citations (Scopus)

Investigation on the stress concentration effect at the corroded surface achieved by atmospheric exposure test

Kainuma, S., Jeong, Y. S. & Ahn, J. H., Apr 25 2014, In : Materials Science and Engineering A. 602, p. 89-97 9 p.

Research output: Contribution to journalArticle

stress concentration
Stress concentration
paints
Paint
corrosion
5 Citations (Scopus)

Mechanical behavior of the U-anchor of super-CFRP rod under tensile loading

Djamaluddin, R., Yamaguchi, K. & Hino, S., Jan 1 2014, In : Journal of Composite Materials. 48, 15, p. 1875-1885 11 p.

Research output: Contribution to journalArticle

Carbon fiber reinforced plastics
Anchors
Tendons
Concretes
Stress concentration
2 Citations (Scopus)
Carbon steel
Corrosion
Sensors
Steel
Rain
2013

Cathodic protection design which considered environmental improvement of rebar surface in reinforced concrete structure

Kobayashi, H., Akira, Y., Yamaji, T., Hamada, H., Wakabayashi, T. & Mochizuki, N., Nov 15 2013, In : Zairyo to Kankyo/ Corrosion Engineering. 62, 4, p. 153-160 8 p.

Research output: Contribution to journalArticle

Cathodic protection
Concrete construction
Reinforced concrete
Caustics
Anodes
14 Citations (Scopus)

Experimental evaluation of shear buckling behaviors and strength of locally corroded web

Kim, I. T., Lee, M. J., Ahn, J. H. & Kainuma, S., Mar 11 2013, In : Journal of Constructional Steel Research. 83, p. 75-89 15 p.

Research output: Contribution to journalArticle

Buckling
Corrosion
Plate girder bridges
Steel
Shear strength

Fatigue behavior of out-of-plane gusset joints with one side fillet weld

Kainuma, S., To, K., Uchida, D., Yagi, N. & Kubo, H., Jan 1 2013, In : Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society. 31, 4, p. 238-245 8 p.

Research output: Contribution to journalArticle

Welds
Fatigue of materials
Crack initiation
Residual stresses
Welding
2 Citations (Scopus)
Carbon steel
Materials properties
Anodes
Porosity
Fibers
11 Citations (Scopus)

Repair method and residual bearing strength evaluation of a locally corroded plate girder at support

Ahn, J. H., Kainuma, S., Yasuo, F. & Takehiro, I., Oct 1 2013, In : Engineering Failure Analysis. 33, p. 398-418 21 p.

Research output: Contribution to journalArticle

Bearings (structural)
Repair
Corrosion
Carbon fiber reinforced plastics
Plate girder bridges
15 Citations (Scopus)

Residual shear strength of steel plate girder due to web local corrosion

Ahn, J. H., Kim, I. T., Kainuma, S. & Lee, M. J., Aug 14 2013, In : Journal of Constructional Steel Research. 89, p. 198-212 15 p.

Research output: Contribution to journalArticle

Steel
Shear strength
Buckling
Corrosion
Expansion joints
10 Citations (Scopus)

Shear failure behaviors of a web panel with local corrosion depending on web boundary conditions

Ahn, J. H., Kainuma, S. & Kim, I. T., Oct 7 2013, In : Thin-Walled Structures. 73, p. 302-317 16 p.

Research output: Contribution to journalArticle

Buckling
Boundary conditions
Corrosion
Nonlinear analysis
Flanges
5 Citations (Scopus)

Structural response of orthotropic bridge deck depending on the corroded deck surface

Jeong, Y. S., Kainuma, S. & Ahn, J. H., Mar 15 2013, In : Construction and Building Materials. 43, p. 87-97 11 p.

Research output: Contribution to journalArticle

Bridge decks
Steel bridges
Corrosion
Asphalt pavements
Painting

Study on retrofit design of port steel structures with cathodic protection of galvanic anode system

Kobayashi, H., Yamaji, T., Akira, Y., Hamada, H., Mochizuki, N. & Shimo, K., Jan 1 2013, In : Zairyo to Kankyo/ Corrosion Engineering. 62, 5, p. 192-197 6 p.

Research output: Contribution to journalArticle

Cathodic protection
Steel structures
Anodes
Retrofitting
Service life
2012
4 Citations (Scopus)

Evaluation method for corrosion depth of uncoated carbon steel and its time-dependence using thickness of corrosion product layer

Kainuma, S., Yamamoto, Y., Itoh, Y., Hayashi, H. & Oshikawa, W., Dec 1 2012, In : Zairyo to Kankyo/ Corrosion Engineering. 61, 12, p. 483-494 12 p.

Research output: Contribution to journalArticle

Carbon steel
Corrosion
Steel
Steel structures
Paint
3 Citations (Scopus)

Evaluation on estimation in characteristics of fatigue crack using micro-encapsulated dye mixing paint

Kainuma, S., Ahn, J. H., Jeong, Y. S. & Takahashi, H., Oct 1 2012, In : Engineering Failure Analysis. 25, p. 1-12 12 p.

Research output: Contribution to journalArticle

Paint
Coloring Agents
Dyes
Structural members
Inspection
5 Citations (Scopus)
Caustics
Carbon steel
Corrosion
Computer simulation
Autocorrelation

Upgrading technologies for concrete structures focusing on surface protection and their prospects: Examples of application to actual structures

Hamada, H., Nomura, N., Niina, T., Watanabe, H. & Terada, N., Jan 1 2012, In : Zairyo/Journal of the Society of Materials Science, Japan. 61, 1, p. 89-95 7 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
Concrete construction
2011
7 Citations (Scopus)
Carbon steel
Rain
Corrosion
Sensors
Steel
3 Citations (Scopus)

Undamental study on corrosion protection method with sacrificial anode of steel members using porous sintered plate and fiber sheet in atmospheric environment

Kainuma, S., Utsunomiya, K., Ishihara, S., Uchida, D. & Kaneko, A., Dec 1 2011, In : Zairyo to Kankyo/ Corrosion Engineering. 60, 12, p. 535-540 6 p.

Research output: Contribution to journalArticle

Steel
Corrosion protection
Anodes
Fibers
Steel fibers
2010
2 Citations (Scopus)

Evaluation method for time-dependent corrosion behavior of carbon steel plate using atmospheric corrosion monitoring sensor

Kainuma, S., Sugitani, K., Itoh, Y. & Kim, I. T., Jan 1 2010, In : Key Engineering Materials. 417-418, p. 417-420 4 p.

Research output: Contribution to journalArticle

Atmospheric corrosion
Carbon steel
Corrosion
Monitoring
Sensors

Evaluation of stress concentration factor for corroded structural steel members in boundary with concrete

Hosomi, N. & Kainuma, S., Dec 1 2010, In : Doboku Gakkai Ronbunshuu A. 66, 4, p. 613-630 18 p.

Research output: Contribution to journalArticle

Stress concentration
Fatigue of materials
Concretes
Steel
Statistics
1 Citation (Scopus)

Relaxation behavior of clamping force in bolted joints of pultruded GFRP laminates

Kishima, T., Katsuno, T., Kobayashi, K., Hino, S. & Nishizaki, I., Jul 1 2010, In : Zairyo/Journal of the Society of Materials Science, Japan. 59, 7, p. 540-545 6 p.

Research output: Contribution to journalArticle

bolted joints
Bolted joints
laminates
Laminates
surface geometry