Department of Architecture and Urban Design

Research output

Research output per year 1984 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023

• 353 Article
• 26 Conference contribution
• 18 Conference article
• 12 Paper
• 13 More
  • 6 Review article
  • 5 Chapter
  • 2 Editorial

Research output per year

Research output per year

Search results

• 2021

  Wall Shear Stress-Based Accuracy Verification of Convective Heat Transfer Coefficient Using Velocity Scale

  Yamamoto, T. & Ozaki, A., Oct 13 2021, IECON 2021 - 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE Computer Society, (IECON Proceedings (Industrial Electronics Conference); vol. 2021-October).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Convective Heat Transfer Coefficient 100%
  • Accuracy 66%
  • Velocity 66%
  • Boundary Layer Theory 66%
  • Wall Shear Stress 66%
  2 Citations (Scopus)
• 2019

  A simulation approach for the optimization of distributed energy supply systems based on energy demands in business area

  Ueno, T., Takahashi, K. & Sumiyoshi, D., 2019, 16th International Conference of the International Building Performance Simulation Association, Building Simulation 2019. Corrado, V., Fabrizio, E., Gasparella, A. & Patuzzi, F. (eds.). International Building Performance Simulation Association, p. 3421-3428 8 p. (Building Simulation Conference Proceedings; vol. 5).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Energy Demand 100%
  • Buildings 75%
  • Supply System 75%
  • Energy Supply 75%
  • Distributed Energy 75%

• Smart passive system for dehumidifieation, cooling, and heating utilizing renewable energy in detached house

  Lee, H., Ozaki, A., Cho, W. & Lee, M., 2019, 16th International Conference of the International Building Performance Simulation Association, Building Simulation 2019. Corrado, V., Fabrizio, E., Gasparella, A. & Patuzzi, F. (eds.). International Building Performance Simulation Association, p. 2442-2449 8 p. (Building Simulation Conference Proceedings; vol. 4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Thermal Loads 100%
  • Latent Heat 50%
  • Detached House 50%
  • Sensible Heat 50%
  • Reduction 25%
  1 Citation (Scopus)

• Study on management and control of a district heating and cooling plant

  Doyama, T., Kondo, M., Imaoka, H., Sumiyoshi, D., Kitayama, H., Lim, J. & Akashi, A. Y., 2019, 16th International Conference of the International Building Performance Simulation Association, Building Simulation 2019. Corrado, V., Fabrizio, E., Gasparella, A. & Patuzzi, F. (eds.). International Building Performance Simulation Association, p. 4102-4109 8 p. (Building Simulation Conference Proceedings; vol. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Temperature 100%
  • Management 100%
  • Investigation 100%
  • District Heating 100%
  • Cooling 50%
• 2017

  Analysis of the hygrothermal environment in high-insulation houses using stand-type radiation panel system

  Myonghyang, L., Ozaki, A., Chiba, Y. & Ohishi, T., 2017, 15th International Conference of the International Building Performance Simulation Association, Building Simulation 2017. Barnaby, C. S. & Wetter, M. (eds.). International Building Performance Simulation Association, p. 276-283 8 p. (Building Simulation Conference Proceedings; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Houses 100%
  • Environment 75%
  • Supports 50%
  • Characteristics 50%
  • Radiation 50%

• Fundamental study of coupling methods between energy simulation and CFD

  Yamamoto, T., Ozaki, A., Lee, M. & Kusumoto, H., 2017, 15th International Conference of the International Building Performance Simulation Association, Building Simulation 2017. Barnaby, C. S. & Wetter, M. (eds.). International Building Performance Simulation Association, p. 51-60 10 p. (Building Simulation Conference Proceedings; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Simulation 100%
  • Temperature Distribution 100%
  • Computational Fluid Dynamics 80%
  • Temperature 40%
  • Boundaries 40%

• Integration of passive and active solar techniques towards developing a Zero-Energy Strategy for Egyptian office Buildings

  Shahin, A. & Sumiyoshi, D., 2017, Proceedings of 33rd PLEA International Conference: Design to Thrive, PLEA 2017. Brotas, L., Roaf, S. & Nicol, F. (eds.). NCEUB 2017 - Network for Comfort and Energy Use in Buildings, p. 2672-2679 8 p. (Proceedings of 33rd PLEA International Conference: Design to Thrive, PLEA 2017; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Office Buildings 100%
  • Buildings 75%
  • Energy Engineering 50%
  • Zeros 50%
  • Energy Level 50%
  1 Citation (Scopus)

• Sensitive analysis of passive dehumidification system using solar heat

  Lee, H., Ozaki, A. & Lee, M., 2017, 15th International Conference of the International Building Performance Simulation Association, Building Simulation 2017. Barnaby, C. S. & Wetter, M. (eds.). International Building Performance Simulation Association, p. 1299-1307 9 p. (Building Simulation Conference Proceedings; vol. 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Dehumidification 100%
  • Solar Collector 80%
  • Heat 40%
  • Reduction 20%
  • Experimental Result 20%
  1 Citation (Scopus)
• 2016

  Experimental study on structural response of two story houses focusing on dynamic characteristics of each story

  Komiyama, M., Sato, T., Watanabe, T., Hida, T., Suzuki, K., Masaki, Y., Iguchi, M. & Nagano, M., Jan 1 2016, WCTE 2016 - World Conference on Timber Engineering. Vienna University of Technology, (WCTE 2016 - World Conference on Timber Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Performance 100%
  • Houses 100%
  • Characteristics 50%
  • Buildings 50%
  • Vibration Mode 50%

• Fundamental study on simple compression test and stress relaxation characteristics of wood

  Tanaka, R., Watanabe, T., Sato, T., Suzuki, K. & Nagano, M., Jan 1 2016, WCTE 2016 - World Conference on Timber Engineering. Vienna University of Technology, (WCTE 2016 - World Conference on Timber Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Stress Relaxation 100%
  • Wood 29%
  • Imposition 12%
  • Bolted Joints 8%
  • Timber 4%

• Scenario analysys: Robust future growth policy analysis in Western Region of Sri Lanka: An exploratory framework for planning policies

  Divigalpitiya, P., 2016, Design and Decision Support Systems in Architecture and Urban Planning - 13th International Conference on Design and Decision Support Systems in Architecture and Urban Planning, DDSS 2016. Timmermans, H. (ed.). Technische Universiteit Eindhoven, (Design and Decision Support Systems in Architecture and Urban Planning - 13th International Conference on Design and Decision Support Systems in Architecture and Urban Planning, DDSS 2016).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Western 100%
  • Strategy 66%
  • Project 66%
  • Transport 66%
  • Scenarios 66%
  1 Citation (Scopus)
• 2015

  Modeling urban growth scenarios in Cairo Metropolitan Region 2035

  Osman, T., Prasanna, D. U. C. S. & Arima, T., Jan 1 2015, CUPUM 2015 - 14th International Conference on Computers in Urban Planning and Urban Management. CUPUM

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Growth 100%
  • Urban Growth 77%
  • Scenarios 55%
  • Region 33%
  • Model 22%
  5 Citations (Scopus)
• 2014

  Energy performance of SOFC cogeneration system for residential buildings in Chinese cold areas

  Gong, X. Z., Akashi, Y. & Sumiyoshi, D., Jan 1 2014, Green Technologies and Sustainable Development in Construction. Trans Tech Publications, p. 48-51 4 p. (Advanced Materials Research; vol. 935).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Residential Building 100%
  • Cogeneration System 100%
  • Solid Oxide Fuel Cell 80%
  • Reduction 60%
  • Primary Energy Demand 60%
  1 Citation (Scopus)

• Finite element analysis of vacant tubular members under static loading considering the tip shapes of load

  Effendi, M. K., Zaitsu, S., Kawaguchi, H., Kawano, A., Matsuo, S., Tsuda, K. & Kido, M., 2014, Materials Engineering and Automatic Control III. Trans Tech Publications Ltd, p. 497-500 4 p. (Applied Mechanics and Materials; vol. 575).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Static Loading 100%
  • Finite Element Modeling 100%
  • Models 50%
  • Yields 50%
  • Dynamic Loads 50%
• 2013

  Elasto-plastic behavior of offset beam-to-column connection panels with exterior diaphragms

  Matsuo, S., Oyamada, T. & Ozono, M., 2013, ISEC 2013 - 7th International Structural Engineering and Construction Conference: New Developments in Structural Engineering and Construction. Research Publishing Services, p. 195-200 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Diaphragm 100%
  • Mechanisms 66%
  • Beam 66%
  • Column Connection 66%
  • Collapse Mechanism 66%
  2 Citations (Scopus)
• 2012

  A study on connections of concrete filled steel tubes by using built-in steel bars

  Kawano, A., Qiao, Q., Matsuo, S. & Ninakawa, T., Jan 1 2012, Sustainable Development of Urban Environment and Building Material. p. 1704-1723 20 p. (Advanced Materials Research; vol. 374-377).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Column Base 100%
  • Steel Bar 87%
  • Concrete Filled Steel Tube 50%
  • Baseplate 50%
  • High Strength Steel 50%

• Seismic responses of high-rise buildings subjected to extreme ground motions of Tohoku earthquake in Japan

  Bai, Y., Kawano, A., Matsuo, S. & Odawara, K., Jan 1 2012, Sustainable Development of Urban Environment and Building Material. p. 2118-2125 8 p. (Advanced Materials Research; vol. 374-377).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Models 100%
  • Ground Movement 100%
  • Steel 75%
  • Rise Building 75%
  • Japan 50%
  1 Citation (Scopus)
• 2011

  New design formulas of h-shaped steel beam-columns subjected to axial compressive force and bending moment

  Kobayashi, M., Tsuda, K., Kido, M. & Kawano, A., Jan 1 2011, ISEC 2011 - 6th International Structural Engineering and Construction Conference: Modern Methods and Advances in Structural Engineering and Construction. Yazdani, S., Cheung, S. O., Singh, A. & Ghafoori, N. (eds.). Research Publishing Services, p. 859-864 6 p. (ISEC 2011 - 6th International Structural Engineering and Construction Conference: Modern Methods and Advances in Structural Engineering and Construction).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Design 100%
  • Beam-Column 36%
  • Steel Beam 36%
  • Lateral-Torsional Buckling 18%
  • Elastic Limit 18%
• 2007

  Steel framed apartment buildings with applications of wood

  Li, L., Okabe, T., Kawano, A. & Hamada, K., 2007, Proceedings of 8th Pacific Structural Steel Conference - Steel Structures in Natural Hazards, PSSC 2007. Vol. 2. p. 265-270 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel 100%
  • Apartment Building 100%
  • Fire Resistance Test 80%
  • Reinforced Concrete 60%
  • Columns (Structural) 60%

• The feasibility of CFT frames forming column yield mechanism

  Xu, P. Z. & Kawano, A., Dec 1 2007, Proceedings of 8th Pacific Structural Steel Conference - Steel Structures in Natural Hazards, PSSC 2007. p. 369-374 6 p. (Proceedings of 8th Pacific Structural Steel Conference - Steel Structures in Natural Hazards, PSSC 2007; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Columns (Structural) 100%
  • Yields 57%
  • Stability 42%
  • Ratios 42%
  • Mechanisms 28%
• 2006

  Analytical study on exposed-type column base of concrete filled steel tube

  Li, T., Li, L. & Kawano, A., Dec 1 2006, Real Structures: Bridges and Tall Buildings - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010. p. 571-576 6 p. (Real Structures: Bridges and Tall Buildings - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010; vol. 4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Column Base 100%
  • Concrete Filled Steel Tube 40%
  • Analysis Method 20%
  • Deformation 20%
  • Plastic Analysis 20%

• Stress transfer capacity from steel tubes to filled concrete in a CFT column at the connection by beams and diagonal braces

  Kawano, A., Sakino, K. & Okamoto, Y., Dec 1 2006, Proceedings of the 5th International Conference on Behaviour of Steel Structures in Seismic Areas - Stessa 2006. p. 619-624 6 p. (Proceedings of the 5th International Conference on Behaviour of Steel Structures in Seismic Areas - Stessa 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Beam 100%
  • Columns (Structural) 100%
  • Filled Tube 100%
  • Diagonal Brace 100%
  • Stress Transfer 100%
• 2000

  Cyclic local buckling and fracture of concrete filled tubular members

  Kawano, A. & Matsui, C., Dec 1 2000, Proceedings of the Conference: Composite Construction in Steel and Concrete IV. Hajjar, J. F., Hosain, M., Easterling, W. S., Shahrooz, B. M., Hajjar, J. F., Hosain, M., Easterling, W. S. & Shahrooz, B. M. (eds.). p. 632-643 12 p. (Proceedings of the Conference: Composite Construction in Steel and Concrete IV).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fracture 100%
  • Small Scale 50%
  • Local Buckling 50%
  • Scale Effect 50%
  • Applications 25%
  3 Citations (Scopus)

• The deformation capacity of trusses with concrete filled tubular chords

  Kawano, A. & Matsui, C., 2000, Proceedings of the Conference: Composite Construction in Steel and Concrete IV. Hajjar, J. F., Hosain, M., Easterling, W. S., Shahrooz, B. M., Hajjar, J. F., Hosain, M., Easterling, W. S. & Shahrooz, B. M. (eds.). p. 734-745 12 p. (Proceedings of the Conference: Composite Construction in Steel and Concrete IV).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Filled Tube 100%
  • Deformation 75%
  • Good Agreement 25%
  • Steel 25%
  • Prediction 25%
  9 Citations (Scopus)
• 1997

  New connections using vertical stiffeners between H-shaped beams and hollow or concrete-filled square tubular columns

  Kawano, A. & Matsui, C., 1997, Proceedings of the Engineering Foundation Conference. Buckner, C. D. & Shahrooz, B. M. (eds.). ASCE, p. 172-185 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Diaphragm 100%
  • Beam 66%
  • Columns (Structural) 66%
  • Design 33%
  • Determines 33%
  7 Citations (Scopus)
• 1984

  LATERAL-TORSIONAL BUCKLING OF TRUSSES WITH RECTANGULAR TUBE SECTIONS.

  Matsui, C., Morino, S. & Kawano, A., 1984, Unknown Host Publication Title. r Int Inst of Welding, London, Engl by Pergamon Press, p. 199-206 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Lateral-Torsional Buckling 100%
  • Deformation 50%
  • Experimental Investigation 50%
  • High Strength 50%
  • Beam-Column 50%
  1 Citation (Scopus)