Department of Marine Systems Engineering

Research Output

2020

Coupled three-dimensional dynamics model of multi-component mooring line for motion analysis of floating offshore structure

Hermawan, Y. A. & Furukawa, Y., Mar 15 2020, In : Ocean Engineering. 200, 106928.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Energy efficiency on the reefer container storage yard; an analysis of thermal performance of installation roof shade

Budiyanto, M. A. & Shinoda, T., Feb 2020, In : Energy Reports. 6, p. 686-692 7 p.

Research output: Contribution to journalArticle

Open Access
Open Access

Floating Offshore Wind Turbines in Goto Islands, Nagasaki, Japan

Utsunomiya, T., Sato, I. & Shiraishi, T., Jan 1 2020, Lecture Notes in Civil Engineering. Springer, p. 359-372 14 p. (Lecture Notes in Civil Engineering; vol. 41).

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
3 Citations (Scopus)
2019

An automated work observation method for shipyards using deep neural networks

Shinoda, T., Tanaka, T. & Okamoto, H., Jan 1 2019.

Research output: Contribution to conferencePaper

A study on improvement of fatigue performance by shot blasted surface treatment

Fujii, T., Gotoh, K., Deguchi, J. & Murakami, K., Jan 1 2019, Materials Technology. American Society of Mechanical Engineers (ASME), V004T03A044. (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A study on the platform-pitching vibration of floating offshore wind turbines based on classical control theory

Kakuya, H., Yoshida, S., Sato, I. & Utsunomiya, T., Jan 1 2019, (Accepted/In press) In : Wind Engineering.

Research output: Contribution to journalArticle

A study on unification of welding consumables in construction of chemical cargo tanker made of duplex stainless steel: Evaluation of static strength of welded joint

Yotsuzuka, T., Endo, Y., Niino, E. & Gotoh, K., Jan 1 2019, Materials Technology. American Society of Mechanical Engineers (ASME), V004T03A051. (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

At-sea experiment on durability and residual strength of polyester rope for mooring of floating wind turbine

Utsunomiya, T., Sato, I. & Tanaka, K., Jan 1 2019, Rodney Eatock Taylor Honoring Symposium on Marine and Offshore Hydrodynamics; Takeshi Kinoshita Honoring Symposium on Offshore Technology. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Automatic track keeping to realize the realistic operation of a ship

Choe, B. & Furukawa, Y., Jan 1 2019, In : International Journal of Fuzzy Logic and Intelligent Systems. 19, 3, p. 172-182 11 p.

Research output: Contribution to journalArticle

Open Access

Axial compressive residual ultimate strength of circular tube after lateral collision

Li, R., Yanagihara, D. & Yoshikawa, T., Jan 2019, In : International Journal of Naval Architecture and Ocean Engineering. 11, 1, p. 396-408 13 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Buckling and collapse analysis of a cracked panel under a sequence of tensile to compressive load employing a shell-solid mixed finite element modeling

Tanaka, S., Sujiatanti, S. H., Setoyama, Y., Yu, J., Yanagihara, D. & Pei, Z., Oct 2019, In : Engineering Failure Analysis. 104, p. 987-1001 15 p.

Research output: Contribution to journalArticle

Comparison of dynamic response in a 2mw floating offshore wind turbine during typhoon approaches

Tanaka, K., Sato, I., Utsunomiya, T. & Kakuya, H., Jan 1 2019, Rodney Eatock Taylor Honoring Symposium on Marine and Offshore Hydrodynamics; Takeshi Kinoshita Honoring Symposium on Offshore Technology. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Conceptual modeling for vital power scale for corporate management by theory of constraint

Doi, H. & Shinoda, T., Oct 7 2019, Transdisciplinary Engineering for Complex Socio-technical Systems - Proceedings of the 26th ISTE International Conference on Transdisciplinary Engineering. Hiekata, K., Moser, B., Moser, B., Inoue, M., Stjepandic, J. & Wognum, N. (eds.). IOS Press BV, p. 167-176 10 p. (Advances in Transdisciplinary Engineering; vol. 10).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of azimuth angle on the energy consumption of refrigerated container

Budiyanto, M. A., Sunaryo, Fernanda, H. & Shinoda, T., Jan 1 2019, In : Energy Procedia. 156, p. 201-206 6 p.

Research output: Contribution to journalConference article

Open Access
5 Citations (Scopus)

Irregular frequency removal and convergence in higher-order bem for wave diffraction/radiation analysis

Utsunomiya, T., Jan 1 2019, Rodney Eatock Taylor Honoring Symposium on Marine and Offshore Hydrodynamics; Takeshi Kinoshita Honoring Symposium on Offshore Technology. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Landing motion control of an underwater glider for ocean floor resources exploration

Yamaguchi, S. & Sumoto, H., Jan 1 2019, Proceedings of the 29th International Ocean and Polar Engineering Conference, ISOPE 2019. Chung, J. S., Akselsen, O. M., Jin, H., Kawai, H., Lee, Y., Matskevitch, D., Ho Van, S., Wan, D., Wang, A. M. & Yamaguchi, S. (eds.). International Society of Offshore and Polar Engineers, p. 1616-1621 6 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical modeling and analysis of a hybrid-spar floating wind turbine

Utsunomiya, T., Sato, I., Kobayashi, O., Shiraishi, T. & Harada, T., Jun 1 2019, In : Journal of Offshore Mechanics and Arctic Engineering. 141, 3, 031903.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Quantitative wear estimation for mooring chain of floating structures and its validation

Takeuchi, T., Utsunomiya, T., Gotoh, K. & Sato, I., Jan 1 2019, Ocean Space Utilization. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stability analysis of free hanging riser conveying fluid for ocean thermal energy conversion (OTEC) utilization

Adiputra, R. & Utsunomiya, T., Jan 1 2019, Rodney Eatock Taylor Honoring Symposium on Marine and Offshore Hydrodynamics; Takeshi Kinoshita Honoring Symposium on Offshore Technology. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Study of drag force acting on various types of dp jack-up vessel legs

Thulkar, N. D., Yamaguchi, S. & Ebihara, K., Jan 1 2019, Proceedings of the 29th International Ocean and Polar Engineering Conference, ISOPE 2019. Chung, J. S., Akselsen, O. M., Jin, H., Kawai, H., Lee, Y., Matskevitch, D., Ho Van, S., Wan, D., Wang, A. M. & Yamaguchi, S. (eds.). International Society of Offshore and Polar Engineers, p. 2998-3004 7 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Three-dimensional dynamic analysis method of multi-component mooring lines

Hermawan, Y. A. & Furukawa, Y., Jan 1 2019, Offshore Technology; Offshore Geotechnics. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tripping buckling strength of ring-stiffener in stiffened cylindrical shells under external pressure

Shiomitsu, D., Toh, K. & Yanagihara, D., Jan 1 2019, Proceedings of the 29th International Ocean and Polar Engineering Conference, ISOPE 2019. Chung, J. S., Akselsen, O. M., Jin, H., Kawai, H., Lee, Y., Matskevitch, D., Ho Van, S., Wan, D., Wang, A. M. & Yamaguchi, S. (eds.). International Society of Offshore and Polar Engineers, p. 4375-4381 7 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wear performance of mooring chain in wet environment with substitute ocean water

Gotoh, K., Ueda, T., Murakami, K. & Utsunomiya, T., Jan 1 2019, Materials Technology. American Society of Mechanical Engineers (ASME), V004T03A045. (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

A method for extracting the work status in shipyard using deep neural networks

Tanaka, T. & Shinoda, T., Jan 1 2018.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

A new method to estimate ultimate strength of stiffened panels under longitudinal thrust based on analytical formulas

Ozdemir, M., Ergin, A., Yanagihara, D., Tanaka, S. & Yao, T., May 2018, In : Marine Structures. 59, p. 510-535 26 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Application of toc for a newly developed shipbuilding industry

Doi, H. & Shinoda, T., Jan 1 2018, Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0: Proceedings of the 25th ISPE Inc. International Conference on Transdisciplinary Engineering. Wognum, N., Stjepandic, J., Pellicciari, M., Bil, C. & Peruzzini, M. (eds.). IOS Press BV, p. 907-916 10 p. (Advances in Transdisciplinary Engineering; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A simple design formula to estimate the ultimate strength of stiffened panels under bi-axial compression mainly in transverse direction

Komoriyama, Y. & Yanagihara, D., Jan 1 2018, Structures, Safety, and Reliability. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifuge model tests on holding capacity of suction anchors in sandy deposits

Kita, K., Utsunomiya, T. & Sekita, K., Jan 1 2018, Physical Modelling in Geotechnics. McNamara, A., Divall, S., Goodey, R., Taylor, N., Stallebrass, S. & Panchal, J. (eds.). CRC Press/Balkema, p. 713-717 5 p. (Physical Modelling in Geotechnics; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Coupled-dynamic analysis of ship-shaped floating structure with dynamic mooring lines in horizontal plane

Hermawan, Y. A. & Furukawa, Y., Jan 1 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 1229-1236 8 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design optimization of floating structure for a 100 MW-net ocean thermal energy conversion (OTEC) power plant

Adiputra, R. & Utsunomiya, T., Jan 1 2018, Ocean Renewable Energy. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 10).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Development of track keeping algorithm using fuzzy inference

Choe, B. & Furukawa, Y., Jan 1 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 731-737 7 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of tensile force for wear performance of mooring chain

Gotoh, K., Nakagawa, M., Murakami, K. & Utsunomiya, T., Jan 1 2018, Materials Technology. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Estimated of energy saving from the application of roof shade on the refrigerated container storage yard

Budiyanto, M. A., Shinoda, T., Sunaryo, Nugroho, F. A. & Wibowo, B., Jun 1 2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 46, 1, p. 114-121 8 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Evaluation of drag coefficient variation in transit mode on leg & spud can of DP Jackups vessel

Thulkar, N. D. & Yamaguchi, S., Jan 1 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 1314-1321 8 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental results of floating platform vibration control with mode change function using full-scale spar-type floating offshore wind turbine

Kakuya, H., Shiraishi, T., Yoshida, S., Utsunomiya, T. & Sato, I., Jun 1 2018, In : Wind Engineering. 42, 3, p. 230-242 13 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Gliding performance of an underwater glider for ocean floor resources exploration

Yamaguchi, S., Sumoto, H., Sakamoto, R. & Nogami, R., Jan 1 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 405-409 5 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

On-site measurement and numerical modelling of a lifting operation for caissons using floating crane

Oh, S., Utsunomiya, T. & Saiki, K., Jan 1 2018, Ocean Space Utilization. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Residual ultimate strength of simply supported corroded plates with initial geometrical imperfections under uniaxial compression

Li, R., Yanagihara, D. & Yoshikawa, T., Jan 1 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 332-339 8 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Review of recent research and developments on floating breakwaters

Dai, J., Wang, C. M., Utsunomiya, T. & Duan, W., Jun 15 2018, In : Ocean Engineering. 158, p. 132-151 20 p.

Research output: Contribution to journalReview article

26 Citations (Scopus)

The effect of solar radiation on the energy consumption of refrigerated container

Budiyanto, M. A. & Shinoda, T., Sep 2018, In : Case Studies in Thermal Engineering. 12, p. 687-695 9 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)
2017

A study on the angular distortion in tee type full penetrated welded joint fabricated by the laser-arc hybrid welding

Tsumura, S., Murakami, K. & Gotoh, K., Dec 2 2017, In : Welding International. 31, 12, p. 911-919 9 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

A study on torsional vibration reduction for variable-speed variable-pitch wind turbines

Zhu, H., Yoshida, S., Kajiwara, H., Ogawa, Y., Nakada, S. & Ono, J., May 6 2017, Proceedings - 2017 IEEE International Conference on Mechatronics, ICM 2017. Institute of Electrical and Electronics Engineers Inc., p. 318-323 6 p. 7921124. (Proceedings - 2017 IEEE International Conference on Mechatronics, ICM 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Automatic piping arrangement design considering piping supports and curved surfaces of building blocks

Kimura, H., Jan 1 2017, RINA, Royal Institution of Naval Architects - International Conference on Computer Applications in Shipbuilding, ICCAS 2017. Royal Institution of Naval Architects, p. 43-50 8 p. (RINA, Royal Institution of Naval Architects - International Conference on Computer Applications in Shipbuilding, ICCAS 2017; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Backside burn prevention measures during welding outfitting equipment for PSPC

Shinoda, T., Uenaka, K., Koike, R., Uchino, I. & Zhao, X., Jan 1 2017.

Research output: Contribution to conferencePaper