Department of Mechanical Engineering

Research Output 1979 2020

2020

Aeroacoustic simulation of broadband sound generated from low-Mach-number flows using a lattice Boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Feb 17 2020, In : Journal of Sound and Vibration. 467, 115044.

Research output: Contribution to journalArticle

Aeroacoustics
aeroacoustics
Mach number
Acoustic waves
broadband
austenitic stainless steels
notches
Austenitic stainless steel
phase transformations
Phase transitions

Evaluation of Feel of Fishing Reel by Elucidating the Relationship Between Tactile Sensation and Gear Vibration

Inoue, T. & Kurokawa, S., Jan 1 2020, Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2019 International Conference on Affective and Pleasurable Design. Fukuda, S. (ed.). Springer Verlag, p. 154-164 11 p. (Advances in Intelligent Systems and Computing; vol. 952).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Reels
Gear teeth
Time delay
1 Citation (Scopus)
high strength alloys
High strength alloys
crack tips
Crack tips
aluminum alloys

Measurement of the microlayer characteristics in the whole range of nucleate boiling for water by laser interferometry

Chen, Z., Hu, X., Hu, K., Utaka, Y. & Mori, S., Jan 2020, In : International Journal of Heat and Mass Transfer. 146, 118856.

Research output: Contribution to journalArticle

Laser interferometry
nucleate boiling
laser interferometry
Nucleate boiling
Heat flux
Fatigue Crack
Crack Initiation
Crack Propagation
Crack initiation
Slip

Plastic deformation sequence and strain gradient characteristics of hydrogen-induced delayed crack propagation in single-crystalline Fe–Si alloy

Huynh, T. T., Koyama, M., Takahashi, Y., Hamada, S., Tsuzaki, K. & Noguchi, H., Mar 15 2020, In : Scripta Materialia. 178, p. 99-103 5 p.

Research output: Contribution to journalArticle

crack propagation
plastic deformation
Hydrogen
Crack propagation
Plastic deformation

Revealing the mechanism of critical root radius in notch fatigue limit based on crack closure concept

Li, B., Jiang, C., Noguchi, H. & Liu, L., Jan 2020, In : International Journal of Fatigue. 130, 105261.

Research output: Contribution to journalArticle

Fatigue Limit
Crack Closure
Crack closure
Notch
Radius

Strain rate and hydrogen effects on crack growth from a notch in a Fe-high-Mn steel containing 1.1 wt% solute carbon

Najam, H., Koyama, M., Bal, B., Akiyama, E. & Tsuzaki, K., Jan 1 2020, In : International Journal of Hydrogen Energy. 45, 1, p. 1125-1139 15 p.

Research output: Contribution to journalArticle

notches
strain rate
Strain rate
Crack propagation
solutes
2019
2 Citations (Scopus)

1-second-resolved strain mapping in Ti-6Al-4V alloys during dwell fatigue in SEM by video sampling moiré

Wang, Q., Ri, S., Maenosono, A., Tanaka, Y. & Koyama, M., Jun 1 2019, In : Mechanics of Materials. 133, p. 63-70 8 p.

Research output: Contribution to journalArticle

dwell
Electron microscopes
electron microscopes
sampling
Fatigue of materials
1 Citation (Scopus)

4D-Printing System for Elastic Magnetic Actuators

Azukizawa, S., Shinoda, H. & Tsumori, F., Jan 2019, 2019 IEEE 32nd International Conference on Micro Electro Mechanical Systems, MEMS 2019. Institute of Electrical and Electronics Engineers Inc., p. 248-251 4 p. 8870639. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS); vol. 2019-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnetic actuators
printing
Printing
actuators
Actuators
1 Citation (Scopus)

Abnormally enhanced diamagnetism in Al-Zn-Mg alloys

Nishimura, K., Matsuda, K., Lee, S., Nunomura, N., Shimano, T., Bendo, A., Watanabe, K., Tsuchiya, T., Namiki, T., Toda, H. & Yamaguchi, M., Feb 5 2019, In : Journal of Alloys and Compounds. 774, p. 405-409 5 p.

Research output: Contribution to journalArticle

Diamagnetism
Magnetization
Aging of materials
Heat treatment
Vacancies

Achievements of NEDO Durability Projects on SOFC Stacks in the Light of Physicochemical Mechanisms

Yokokawa, H., Suzuki, M., Yoda, M., Suto, T., Tomida, K., Hiwatashi, K., Shimazu, M., Kawakami, A., Sumi, H., Ohmori, M., Ryu, T., Mori, N., Iha, M., Yatsuzuka, S., Yamaji, K., Kishimoto, H., Develos-Bagarinao, K., Shimonosono, T., Sasaki, K., Taniguchi, S. & 16 others, Kawada, T., Muramatsu, M., Terada, K., Eguchi, K., Matsui, T., Iwai, H., Kishimoto, M., Shikazono, N., Mugikura, Y., Yamamoto, T., Yoshikawa, M., Yasumoto, K., Asano, K., Matsuzaki, Y., Sato, K. & Somekawa, T., Jan 1 2019, In : Fuel Cells. 19, 4, p. 311-339 29 p.

Research output: Contribution to journalArticle

Solid oxide fuel cells (SOFC)
Durability
Degradation
Anodes
Cathodes
3 Citations (Scopus)

A combination of the finite element analysis and experimental indentation via the cornea

Karimi, A., Razaghi, R., Sera, T. & Kudo, S., Feb 1 2019, In : Journal of the Mechanical Behavior of Biomedical Materials. 90, p. 146-154 9 p.

Research output: Contribution to journalArticle

Indentation
Finite element method
Elastic moduli
Stiffness

Adsorbed gas layers limit the mobility of micropancakes

Teshima, H., Takata, Y. & Takahashi, K., Aug 12 2019, In : Applied Physics Letters. 115, 7, 071603.

Research output: Contribution to journalArticle

gases
atomic force microscopy
vapor phases
pyrolytic graphite
solid surfaces

A fluid-actuated driving mechanism for rolling robots

Tafrishi, S. A., Esmaeilzadeh, E., Svinin, M. & Yamamoto, M., Jul 2019, 2019 4th IEEE International Conference on Advanced Robotics and Mechatronics, ICARM 2019. Institute of Electrical and Electronics Engineers Inc., p. 256-261 6 p. 8833646. (2019 4th IEEE International Conference on Advanced Robotics and Mechatronics, ICARM 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Actuator
Rotating
Actuators
Robot
Robots

Al-10Mg 合金における応力腐食割れ挙動に及ぼす水素の影響

Translated title of the contribution: Influence of hydrogen on stress corrosion cracking behavior in Al-10Mg alloyHirayama, K., Toda, H., Shimizu, K., Uesugi, K., Takeuchi, A. & Masunaga, R., Jan 1 2019, In : Keikinzoku/Journal of Japan Institute of Light Metals. 69, 4, p. 223-227 5 p.

Research output: Contribution to journalArticle

Open Access
Stress corrosion cracking
Hydrogen
Corrosion
Cracks
Synchrotrons

Alternative Ni-alloy cermet anode materials for SOFCs

Ishibashi, Y., Futamura, S., Tachikawa, Y., Matsuda, J., Shiratori, Y., Taniguchi, S. & Sasaki, K., Jan 1 2019, Solid Oxide Fuel Cells 16, SOFC 2019. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 1889-1896 8 p. (ECS Transactions; vol. 91, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Anodes
Energy conversion
Zirconia
Deterioration

An unreported precipitate orientation relationship in Al-Zn-Mg based alloys

Bendo, A., Matsuda, K., Lervik, A., Tsuru, T., Nishimura, K., Nunomura, N., Holmestad, R., Marioara, C. D., Shimizu, K., Toda, H. & Yamaguchi, M., Dec 2019, In : Materials Characterization. 158, 109958.

Research output: Contribution to journalArticle

Precipitates
precipitates
ledges
Transmission electron microscopy
transmission electron microscopy

Assessment of hydrogen embrittlement via image-based techniques in Al–Zn–Mg–Cu aluminum alloys

Su, H., Toda, H., Shimizu, K., Uesugi, K., Takeuchi, A. & Watanabe, Y., Sep 1 2019, In : Acta Materialia. 176, p. 96-108 13 p.

Research output: Contribution to journalArticle

Hydrogen embrittlement
Hydrogen
Aluminum alloys
Intermetallics
Precipitates

Assessment of predominant microstructural features controlling 3D short crack growth behavior via a surrogate approach in Ti-6Al-4V

Hassanipour, M., Watanabe, S., Hirayama, K., Li, H., Toda, H., Uesugi, K. & Takeuchi, A., Mar 28 2019, In : Materials Science and Engineering A. 751, p. 351-362 12 p.

Research output: Contribution to journalArticle

short cracks
Crack propagation
cracks
Cracks
shear stress
Open Access
turbine
prediction
flow velocity
experiment
flow field

A Study on Real-Time Detection of Interacting Motion Intention for Perception-Assist with an Upper-Limb Wearable Power-Assist Robot

Kiguchi, K. & Chathuramali, M., Jan 16 2019, Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 900-905 6 p. 8616156. (Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion Perception
Upper Extremity
Robots
Aptitude
Classifiers

Attempts on pico-precision machining via combination of ELID-grinding and polishing

Ohmori, H., Kim, Y., Uehara, Y., Kasuga, H., Ono-Kato, T., Lin, W., Kurokawa, S. & Umezu, S., Jan 1 2019, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 4, p. 304-309 6 p.

Research output: Contribution to journalArticle

Polishing
Machining

Biogas Power Generation with SOFC to Demonstrate Energy Circulation Suitable for Mekong Delta, Vietnam

Shiratori, Y., Sakamoto, M., Nguyen, T. G. H., Yamakawa, T., Kitaoka, T., Orishima, H., Matsubara, H., Watanabe, Y., Nakatsuka, S., Doan, T. C. D. & Dang, C. M., Jan 1 2019, In : Fuel Cells. 19, 4, p. 346-353 8 p.

Research output: Contribution to journalArticle

Biogas
Solid oxide fuel cells (SOFC)
Power generation
Bagasse
Ponds

Biomimetic artificial cartilage: Fibre-reinforcement of PVA hydrogel to promote biphasic lubrication mechanism

Sakai, N., Yarimitsu, S., Sawae, Y., Komori, M. & Murakami, T., Mar 1 2019, In : Biosurface and Biotribology. 5, 1, p. 13-19 7 p.

Research output: Contribution to journalArticle

Open Access
Lubrication
Biomimetics
Hydrogel
Cartilage
Fiber reinforced materials

Bio-mimic motion of 3D-printed gel structures dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., Jan 1 2019, In : Journal of the Electrochemical Society. 166, 9, p. B3235-B3239

Research output: Contribution to journalArticle

Open Access
Particles (particulate matter)
Gels
Actuators
Magnetic fields
Magnetic anisotropy

Bio-mimic motion of elastic material dispersed with hard-magnetic particles

Furusawa, M., Maeda, K., Azukizawa, S., Shinoda, H. & Tsumori, F., Jan 1 2019, In : Journal of Photopolymer Science and Technology. 32, 2, p. 309-313 5 p.

Research output: Contribution to journalArticle

Open Access
Elastomers
Neodymium
Magnetic materials
Cantilever beams
Biomimetics
2 Citations (Scopus)

Bio-mimic motion of gel material dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., Jan 1 2019, ECS Transactions. Nagahara, L., Masubuchi, Y., Shiba, T., Ito, K., Sekhar, P., Yanagida, M., Dos Santos, F. D., Milano, G., Furukawa, H., Chu, T-Y., Saito, T., Kakugo, A., Matsui, H., Tokito, S., Ito, H., Khosla, A., Fukushima, K., Yoshida, T., Bhansali, S., Kaltenbrunner, M., White, M., Nakai, A. & Masuhara, A. (eds.). 1 ed. Electrochemical Society Inc., p. 89-97 9 p. (ECS Transactions; vol. 88, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Particles (particulate matter)
Printing
Actuators
Gels
3D printers

Cavitation simulation of automotive torque converter using a homogeneous cavitation model

Tsutsumi, K., Watanabe, S., Tsuda, S. & Yamaguchi, T., Jan 1 2019.

Research output: Contribution to conferencePaper

Torque converters
Cavitation
Pumps
Turbine pumps
Partial pressure
1 Citation (Scopus)

Cavitation simulation using a new simple homogeneous cavitation model

Watanabe, S., Tsuru, W., Yamamoto, Y. & Tsuda, S., Jan 1 2019.

Research output: Contribution to conferencePaper

Cavitation
Hydrofoils
Shear stress
Liquids
Vapors

Change of crack initiation and propagation modes in hydrogenrelated failure of a precipitation-strengthened NI-based superalloy 718 under internal and external hydrogen conditions

Ogawa, Y., Takakuwa, O., Okazaki, S., Matsuoka, S. & Matsunaga, H., Jan 1 2019, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Superalloys
Crack initiation
Crack propagation
Hydrogen
Ductility
4 Citations (Scopus)

Characterisation of structural similarities of precipitates in Mg–Zn and Al–Zn–Mg alloys systems

Bendo, A., Maeda, T., Matsuda, K., Lervik, A., Holmestad, R., Marioara, C. D., Nishimura, K., Nunomura, N., Toda, H., Yamaguchi, M., Ikeda, K. I. & Homma, T., Nov 2 2019, In : Philosophical Magazine. 99, 21, p. 2619-2635 17 p.

Research output: Contribution to journalArticle

precipitates
hexagons
bricks
cells
aspect ratio

Choice of muscular forces for motion control of a robot arm with biarticular muscles

Morizono, T., Tahara, K. & Kino, H., Jan 1 2019, In : Journal of Robotics and Mechatronics. 31, 1, p. 143-155 13 p.

Research output: Contribution to journalArticle

Motion control
Muscle
Robots
Robotic arms
Kinetics

Classification for Two Recovery Action Strategies in Slipping Fall

Kobayashi, T., Nakashima, Y. & Yamamoto, M., Apr 25 2019, Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019. Institute of Electrical and Electronics Engineers Inc., p. 233-236 4 p. 8700375. (Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

recovery
Recovery
falling
Accidents
Experiments

CMP characteristics of quartz glass substrate by aggregated colloidal ceria slurry

Wakamatsu, K., Kurokawa, S., Toyama, T. & Hayashi, T., Nov 1 2019, In : Precision Engineering. 60, p. 458-464 7 p.

Research output: Contribution to journalArticle

Cerium compounds
Quartz
Glass
Substrates
Polishing

Colorectal endoscopic submucosal dissection using novel articulating devices: a comparative study in a live porcine model

Okamoto, Y., Nakadate, R., Nakamura, S., Arata, J., Oguri, S., Moriyama, T., Esaki, M., Iwasa, T., Ohuchida, K., Akahoshi, T., Ikeda, T., Kitazono, T. & Hashizume, M., Feb 15 2019, In : Surgical endoscopy. 33, 2, p. 651-657 7 p.

Research output: Contribution to journalArticle

Swine
Equipment and Supplies
Endoscopic Mucosal Resection
Anal Canal
Colon
1 Citation (Scopus)

Comparative study of hydrogen-induced intergranular fracture behavior in Ni and Cu–Ni alloy at ambient and cryogenic temperatures

Wada, K., Yamabe, J., Ogawa, Y., Takakuwa, O., Iijima, T. & Matsunaga, H., Oct 24 2019, In : Materials Science and Engineering A. 766, 138349.

Research output: Contribution to journalArticle

cryogenic temperature
Cryogenics
ambient temperature
Hydrogen
hydrogen embrittlement
1 Citation (Scopus)
Open Access
end effectors
End effectors
strokes
Brain computer interface
recovery
1 Citation (Scopus)

Compliant four degree-of-freedom manipulator with locally deformable elastic elements for minimally invasive surgery

Arata, J., Fujisawa, Y., Nakadate, R., Kiguchi, K., Harada, K., Mitsuishi, M. & Hashizume, M., May 1 2019, 2019 International Conference on Robotics and Automation, ICRA 2019. Institute of Electrical and Electronics Engineers Inc., p. 2663-2669 7 p. 8793798. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2019-May).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surgery
Manipulators
Robotics
Needles
Finite element method
1 Citation (Scopus)

Coupled thermal transport and mass diffusion during vapor absorption into hygroscopic liquid desiccant droplets

Wang, Z., Orejon, D., Sefiane, K. & Takata, Y., May 1 2019, In : International Journal of Heat and Mass Transfer. 134, p. 1014-1023 10 p.

Research output: Contribution to journalArticle

Hygroscopic Agents
desiccants
Vapors
vapors
Liquids
1 Citation (Scopus)

Crystallographic selection rule for the propagation mode of microstructurally small fatigue crack in a laminated Ti-6Al-4V alloy: Roles of basal and pyramidal slips

Maenosono, A., Koyama, M., Tanaka, Y., Ri, S., Wang, Q. & Noguchi, H., Nov 1 2019, In : International Journal of Fatigue. 128, 105200.

Research output: Contribution to journalArticle

Fatigue Crack Growth
Fatigue Crack
Selection Rules
Fatigue crack propagation
Slip
3 Citations (Scopus)

Density Data of Two (H2 + CO2) Mixtures and a (H2 + CO2 + CH4) Mixture by a Modified Burnett Method at Temperature 673 K and Pressures up to 25 MPa

Cheng, S., Shang, F., Ma, W., Jin, H., Sakoda, N., Zhang, X. & Guo, L., Apr 11 2019, In : Journal of Chemical and Engineering Data. 64, 4, p. 1693-1704 12 p.

Research output: Contribution to journalArticle

Equations of state
Temperature
Water
Coal
Gasification

Density measurements of the H2-CO2-CH4-CO-H2O System by the Isochoric Method at 722-930 K and 15.4-30.3 MPa

Cheng, S., Shang, F., Ma, W., Jin, H., Sakoda, N., Zhang, X. & Guo, L., Sep 12 2019, In : Journal of Chemical and Engineering Data. 64, 9, p. 4013-4023 11 p.

Research output: Contribution to journalArticle

Carbon Monoxide
Water
Equations of state
Gasification
Thermal expansion

Design, modeling, and motion analysis of a novel fluid actuated spherical rolling robot

Tafrishi, S. A., Svinin, M., Esmaeilzadeh, E. & Yamamoto, M., Aug 1 2019, In : Journal of Mechanisms and Robotics. 11, 4, 041010.

Research output: Contribution to journalArticle

Robots
Fluids
Pipe
Torque motors
Mobile robots

Design and control of a power-assist system for pedal operation

Fujita, T., Kiguchi, K., Yabunaka, S., Takeda, Y. & Hara, T., Jan 1 2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 651-654 4 p.

Research output: Contribution to journalArticle

Railroad cars

Detection Improvement of Unburned Carbon Content in Fly Ash Flow Using LIBS with a Two-Stage Cyclone Measurement System

Wang, Z., Liu, R., Deguchi, Y., Tanaka, S., Tainaka, K., Tanno, K., Watanabe, H., Yan, J. & Liu, J., Aug 15 2019, In : Energy and Fuels. 33, 8, p. 7805-7812 8 p.

Research output: Contribution to journalArticle

Coal Ash
Laser induced breakdown spectroscopy
Fly ash
Carbon
Plasmas

Detection of hydrogen effusion before, during, and after martensitic transformation: Example of multiphase transformation-induced plasticity steel

Koyama, M., Yamasaki, D., Ikeda, A., Hojo, T., Akiyama, E., Takai, K. & Tsuzaki, K., Oct 4 2019, In : International Journal of Hydrogen Energy. 44, 47, p. 26028-26035 8 p.

Research output: Contribution to journalArticle

Martensitic transformations
martensitic transformation
plastic properties
Plasticity
steels

Development of a Heat-Treated Polymer-Polymer Type Charge-Transfer Blend Membrane for Application in Polymer Electrolyte Fuel Cells

Feng, S., Kondo, S., Kikuchi, T., Christiani, L., Hwang, B., Sasaki, K. & Nishihara, M., Jan 1 2019, (Accepted/In press) In : ACS Applied Energy Materials.

Research output: Contribution to journalArticle

Open Access
Polymer blends
Electrolytes
Charge transfer
Fuel cells
Polymers
Open Access
Shock waves
Hydrophones
Cavitation
Needles