Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
2008
3 Citations (Scopus)

Effects of hydrogen atmosphere on wear behavior of PTFE sliding against austenitic stainless steel

Sawae, Y., Yamaguti, A., Nakashima, K., Murakami, T. & Sugimura, J., May 16 2008, 2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007. p. 43-45 3 p. (2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007; vol. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

polytetrafluoroethylene
austenitic stainless steels
Polytetrafluoroethylene
Austenitic stainless steel
Polytetrafluoroethylenes
1 Citation (Scopus)

Effects of internal hydrogen on fatigue strength of commercially pure titanium

Nishikawa, H., Oda, Y. & Noguchi, H., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. p. 1289-1296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium
Hydrogen
Fatigue of materials
Crack initiation
Fatigue strength
2 Citations (Scopus)

Estimation of water layer thickness adjacent to the cathode catalyst layer of a PEFC (analysis using electrochemical impedance spectroscopy)

Hoshiko, T., Nakajima, H., Konomi, T., Kitahara, T. & Kita, S., Dec 1 2008, ECS Transactions - Proton Exchange Membrane Fuel Cells 8. 2 PART 2 ed. p. 2117-2123 7 p. (ECS Transactions; vol. 16, no. 2 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrochemical impedance spectroscopy
Fuel cells
Cathodes
Electrolytes
Catalysts
10 Citations (Scopus)

Low-power consumption integrated laser Doppler blood flowmeter with a built-in silicon mierolens

Kimura, Y., Onoe, A., Higurashi, E. & Sawada, R., Oct 23 2008, 2008 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OPT MEMS. p. 13-14 2 p. 4607804. (2008 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OPT MEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flowmeters
Photodiodes
Semiconductor lasers
Electric power utilization
Blood

Magnetic properties of Fe-6.5Si powder injection molded materials

Miura, H., Tanaka, Y., Osada, T., Tokuoka, T., Nishioka, T. & Ikegaya, A., Dec 1 2008, Advances in Powder Metallurgy and Particulate Materials - 2008, Proceedings of the 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008. p. 4144-4152 9 p. (Advances in Powder Metallurgy and Particulate Materials - 2008, Proceedings of the 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grain growth
Powders
Magnetic properties
injection
magnetic properties

Measurement of tooth pair deflections with ultra high resolution encoders and prediction of transmission error under load in high precision

Kurokawa, S. & Ariura, Y., Jun 13 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 99-108 10 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Encoder
Deflection
High Resolution
Gear teeth
Prediction

Micro drilling into brittle materials by chemically plated diamond tools

Park, H. K., Onikura, H., Ohnishi, O., Sajima, T. & Sharifuddin, A., 2008, Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008. euspen, Vol. 2. p. 465-468 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

brittle materials
Diamond
Brittleness
drilling
Diamonds

Micro oscillation heat pipe fabricated on silicon wafer

Kohno, M., Nishizono, T., Onaka, Y., Hidaka, S., Takahashi, K. & Takata, Y., Dec 1 2008, Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008. PART B ed. p. 1343-1346 4 p. (Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008; no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat pipes
Silicon wafers
Steady flow
Microchannels
Heat transfer

Microscopic deformation behavior of lamellar pearlite steel

Sakoda, Y., Kashiwagi, S., Hamada, S. & Noguchi, H., Dec 1 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. p. 358-365 8 p. (17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pearlite
Fatigue of materials
Steel
Cracks
Microstructure
5 Citations (Scopus)

Numerical and experimental studies on separated boundary layers over ultra-high lift low-pressure turbine cascade airfoils with variable solidity: Effects of free-stream turbulence

Funazaki, K. I., Yamada, K., Chiba, Y. & Tanaka, N., Dec 1 2008, 2008 Proceedings of the ASME Turbo Expo: Power for Land, Sea, and Air. PART B ed. (Proceedings of the ASME Turbo Expo; vol. 6, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cascades (fluid mechanics)
Airfoils
Boundary layers
Turbulence
Turbines
16 Citations (Scopus)

Numerical investigation of relation between unsteady behavior of tip leakage vortex and rotating disturbance in a transonic axial compressor rotor

Yamada, K., Funazaki, K. & Sasaki, H., Dec 1 2008, 2008 Proceedings of the ASME Turbo Expo: Power for Land, Sea, and Air. PART A ed. p. 425-436 12 p. (Proceedings of the ASME Turbo Expo; vol. 6, no. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Vortex flow
Rotors
Unsteady flow
NASA
1 Citation (Scopus)

On iterative learning control for simultaneous force/position trajectory tracking by using a 5 D.O.F. robotic thumb under non-holonomic rolling constraints

Tahara, K., Arimoto, S., Sekimoto, M., Yoshida, M. & Luo, Z. W., Sep 18 2008, 2008 IEEE International Conference on Robotics and Automation, ICRA 2008. p. 2611-2616 6 p. 4543606. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Trajectories
Point contacts
Robots
Computer simulation

Proposal of estimation method for notched specimen fatigue limit of commercially pure titanium

Fujii, T., Hamada, S. & Noguchi, H., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. p. 937-944 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium
Fatigue of materials
Crack initiation
Fatigue cracks
5 Citations (Scopus)

Real-time analog input device using breath pressure for the operation of powered wheelchair

Yamamoto, M., Ikeda, T. & Sasaki, Y., Sep 18 2008, 2008 IEEE International Conference on Robotics and Automation, ICRA 2008. p. 3914-3919 6 p. 4543812. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wheelchairs
Air curtains
Pressure control
Experiments
1 Citation (Scopus)

The decrease of tensile strength for the notched specimens in the hydrogen gas

Itoga, H., Suzuki, Y. & Noguchi, H., Dec 1 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. p. 1304-1311 8 p. (17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tensile strength
Hydrogen
Gases
Crack initiation
Thermal desorption
1 Citation (Scopus)

Three-dimensional integration of optical multi-chips using surface-activated bonding for high-density microsystems packaging

Higurashi, E., Chino, D., Suga, T. & Sawada, R., Oct 23 2008, 2008 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OPT MEMS. p. 62-63 2 p. 4607829. (2008 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OPT MEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microsystems
Packaging
Microlenses
Laser Doppler velocimeters
Glass
2007
1 Citation (Scopus)

Analysis of vibratory response and noise radiation of engine block coupled with the rotating crankshaft and gear train system

Ohta, K., Okimoto, T., Honda, I. & Yoshizumi, K., 2007, 14th International Congress on Sound and Vibration 2007, ICSV 2007. Vol. 1. p. 377-384 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

electromagnetic noise
engines
rotating shafts
fuel injection
engine noise
1 Citation (Scopus)

A study of safety control for omni-directional mobile robots in consideration of driving wheel slips

Ushimi, N., Tsuruta, K. & Yamamoto, M., Dec 1 2007, Proceedings of the 13th IASTED International Conference on Robotics and Applications, RA 2007 and Proceedings of the IASTED International Conference on Telematics. p. 27-32 6 p. (Proceedings of the 13th IASTED International Conference on Robotics and Applications, RA 2007 and Proceedings of the IASTED International Conference on Telematics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mobile robots
Wheels
Navigation
Experiments
6 Citations (Scopus)

Combined device of optical microdisplacement sensor and PZT-actuated micromirror

Akase, K., Sawada, R., Higurashi, E., Kobayashi, T., Maeda, R., Inokuchi, M., Sanada, S. & Ishikawa, I., Dec 1 2007, 2007 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OMENS. p. 199-200 2 p. 4373909. (2007 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OMENS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical sensors
Mirrors
Microsensors
Surface emitting lasers
Hinges
2 Citations (Scopus)

Development and use of a micro optical blood flow sensor based on system in package (SiP) technology that fuses optical MEMS and integrated circuit to detect avian influenza

Seto, R., Sawada, R., Higurashi, E., Itoh, T., Suzuki, K., Tsukamoto, K., Ikehara, T., Maeda, R., Masuda, T. & Fujitsu, T., Dec 1 2007, TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems. p. 1955-1958 4 p. 4300543. (TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MOEMS
Electric fuses
Integrated circuits
Blood
Sensors

Development of a laser-guided deep-hole grinding tool: Performance test

Katsuki, A., Park, H. K., Onikura, H., Sajima, T., Nakanishi, T. & Murakami, H., Dec 1 2007, Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007. (Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grinding wheels
Lasers

Development of a laser-guided deep-hole measuring system: Measurements of roundness, cylindricity and straightness

Katsuki, A., Murakami, H., Onikura, H. & Sajima, T., 2007, LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Scanning
Lasers

Engineering management framework to achieve a safety of service of an organization on the basis of acceptance by a society

Otsuka, Y. & Noguchi, H., 2007, WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc.. Vol. 4. p. 275-280 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Managers
Specifications
10 Citations (Scopus)

Experimental studies on aerodynamic performance and unsteady flow behaviors of a single turbine stage with variable rotor-stator axial gap: Comparisons with time-accurate numerical simulation

Funazaki, K. I., Yamada, K., Kikuchi, M. & Sato, H., Sep 25 2007, Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air. p. 703-711 9 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Unsteady flow
Stators
Aerodynamics
Turbines
Rotors

Feasibility study of noninvasive measurement of thermal conductivityand thermal diffusivity for biological materials

Yoshida, K., Takamatsu, H., Uchida, S. & Fujii, M., Dec 1 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 59-64 6 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermal diffusivity
thermal diffusivity
Biological materials
Laser beam effects
Temperature

Flow measurement at partial flow rate with LDV around rear rotor of contra-rotating axial flow pump

Yamashita, S., Watanabe, S., Okuma, K., Shirasawa, K. & Furukawa, A., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 909-914 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

axial flow pumps
Axial flow
flow measurement
Flow measurement
rotors

Freezing of cells; role of ice and solutes in cell damage

Takamatsu, H., Dec 1 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 903-912 10 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Freezing
freezing
Ice
solutes
ice
33 Citations (Scopus)

Fuel impurity tolerance of solid oxide fuel cells

Sasaki, K., Adachi, S., Haga, K., Uchikawa, M., Yamamoto, J., Iyoshi, A., Chou, J. T., Shiratori, Y. & Itoh, K., Dec 1 2007, ECS Transactions - 10th International Symposium on Solid Oxide Fuel Cells, SOFC-X. 1 PART 2 ed. p. 1675-1683 9 p. (ECS Transactions; vol. 7, no. 1 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Impurities
Gas fuels
Reforming reactions
Fuel cells
1 Citation (Scopus)

Gas nitriding mechanism in titanium powder injection molded products

Osada, T., Miura, H., Yamagami, T., Nishiyabu, K. & Tanaka, S., Dec 1 2007, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 1 ed. p. 361-364 4 p. (Materials Science Forum; vol. 534-536, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

nitriding
Nitriding
Titanium
injection molding
Powders
5 Citations (Scopus)

Incorporating geometric algorithms in impedance- And admittance-type haptic rendering

Kikuuwe, R. & Fujimoto, H., Aug 28 2007, Proceedings - Second Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, World Haptics 2007. p. 249-254 6 p. 4145183. (Proceedings - Second Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, World Haptics 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Virtual reality
Damping
Experiments
11 Citations (Scopus)

Influences of gas diffusion layer design parameters on the performance of polymer electrolyte fuel cells

Kitahara, T., Konomi, T., Murata, M., Berg, N. & Wilde, P. M., Dec 1 2007, ECS Transactions - 30th Fuel Cell Seminar. 1 ed. p. 27-36 10 p. (ECS Transactions; vol. 5, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Atmospheric humidity
Electrolytes
Polymers
2 Citations (Scopus)

Micro metal injection molding process for high performance titanium alloy

Miura, H., Osada, T., Tanaka, S. & Uemura, M., Dec 1 2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 4 ed. p. 3667-3672 6 p. (Materials Science Forum; vol. 539-543, no. PART 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
injection molding
nitriding
Nitriding
titanium alloys

Micro-refrigerator fabricated on silicon wafer

Takata, Y., Sugahara, K., Tachikawa, T., Moroe, S., Kubota, H., Kohno, M., Takahashi, K. & Koshimizu, T., Dec 21 2007, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007. p. 749-754 6 p. (Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Refrigerators
refrigerators
heat exchangers
Silicon wafers
Heat exchangers
2 Citations (Scopus)

Microstructure and electrochemical properties of Ni1-xMg xO-ScSZ cermet anodes for biogas fueled SOFCs

Shiratori, Y. & Sasaki, K., Dec 1 2007, ECS Transactions - 10th International Symposium on Solid Oxide Fuel Cells, SOFC-X. 1 PART 2 ed. p. 1701-1710 10 p. (ECS Transactions; vol. 7, no. 1 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biogas
Solid oxide fuel cells (SOFC)
Electrochemical properties
Anodes
Microstructure
1 Citation (Scopus)

Nano manufacturing of a small-tipped stylus for measurement of micro-machine elements with concave surfaces

Kurokawa, S. & Imamura, S., 2007, Proceedings of the 35th International MATADOR 2007 Conference. p. 7-10 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Etching
Wet etching
Reactive ion etching
Photolithography
Electron beams
2 Citations (Scopus)

Numerical/experimental investigations on inlet back flow in a helical inducer in partial flow conditions

Watanabe, S., Ishizaka, K., Kim, J. H. & Furukawa, A., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 893-898 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

helical inducers
Surges (fluid)
cavitation flow
Cavitation
flow velocity

Numerical simulation of heat pumping in a pulse tube refrigerator

Koshimizu, T., Takata, Y., Kubota, H. & Ito, T., Dec 1 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 715-720 6 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Refrigerators
refrigerators
Orifices
pumping
tubes

Numerical study of blood flow in the hepatic portion of the inferior vena cava

Matsubara, M., Konishi, K., Watanabe, M., Yamaguchi, S., Watanabe, S. & Hashizume, M., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART A ed. p. 695-698 4 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

blood flow
Blood
veins
vessels
Shear stress
4 Citations (Scopus)

Passive virtual fixtures based on simulated position-dependent anisotropic plasticity

Kikuuwe, R., Takesue, N. & Fujimoto, H., Nov 27 2007, 2007 IEEE International Conference on Robotics and Automation, ICRA'07. p. 3263-3268 6 p. 4209594. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Haptic interfaces
Plasticity
Experiments
2 Citations (Scopus)

Preparation and hydrogen storage properties of Mg-Ni-B BCC alloys

Shao, H., Asano, K., Enoki, H. & Akiba, E., Dec 1 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 ed. p. 1625-1628 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen storage
Hydrogen
Mechanical alloying
Ball milling
Crystallite size
4 Citations (Scopus)

Similarity law of air-water two-phase flow performance of centrifugal pump

Matsushita, N., Watanabe, S., Okuma, K., Hasui, T. & Furukawa, A., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 915-920 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

centrifugal pumps
Centrifugal pumps
two phase flow
Two phase flow
blades

Synthesis of single walled carbon nanotubes by laser vaporized catalytic chemical vapor deposition technique

Yamamoto, S., Onaka, Y., Suzuki, S., Maruyama, S., Tani, K., Takata, Y., Shibuta, Y. & Kohno, M., Dec 1 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 387-393 7 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Single-walled carbon nanotubes (SWCN)
Chemical vapor deposition
carbon nanotubes
vapor deposition
Lasers
42 Citations (Scopus)

The behavior of tip clearance flow at near-stall condition in a transonic axial compressor rotor

Yamada, K., Funazaki, K. & Furukawa, M., Sep 25 2007, Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air. p. 295-306 12 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Vortex flow
Shock waves
Flow fields
1 Citation (Scopus)

Three-dimensional structure of separated and vortical flow inahalf-ducted propeller fan

Jeong, J. H., Takahashi, K., Iwakiri, K. & Furukawa, M., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 1005-1010 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

shrouded propellers
propeller fans
separated flow
Propellers
Fans
1 Citation (Scopus)

Transport phenomena in engineered cartilage with tissue development in agarose gel

Kitajima, Y., Sawae, Y., Sugino, S., Murakami, T., Sanada, T. & Watanabe, M., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART A ed. p. 703-707 5 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

cartilage
Cartilage
Gels
gels
Tissue
15 Citations (Scopus)

Vortical flow structure and loss generation process in a transonic centrifugal compressor impeller

Ibaraki, S., Furukawa, M., Iwakiri, K. & Takahashi, K., 2007, Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air. Vol. 6 PART B. p. 1089-1098 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow structure
Vortex flow
Transonic flow
Shock waves
2006

Active noise control using online secondary path identification algorithm

Kijimoto, S., Imamura, Y., Kanemitsu, Y., Matsuda, K. & Koba, Y., 2006, Institute of Noise Control Engineering of the USA - 35th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2006. Vol. 4. p. 2436-2442 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sound fields
microphones
simulation
acoustics
1 Citation (Scopus)

A method for in-situ targeting and harvesting of cultured cells under a microscope

Takamatsu, H., Uchida, S. & Matsuda, T., Dec 1 2006, 2006 IEEE International Symposium on Micro-Nano Mechanical and Human Science, MHS. 4110351. (2006 IEEE International Symposium on Micro-Nano Mechanical and Human Science, MHS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microscopes
Cells
Cell culture
Adhesives
Cooling

Analysis of thermodynamic effects on cavitation instabilities

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., Dec 1 2006, Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM2006. p. 139-146 8 p. (Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM2006; vol. 2 FORUMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Surges (fluid)
Cryogenics
Fluids

Analysis of thermodynamic effects on cavitation instabilities

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., 2006, 2006 ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006. Vol. 2006.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Surges (fluid)
Cryogenics
Fluids