Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
2005
7 Citations (Scopus)

Low-temperature LD direct bonding for highly functional optical MEMS

Higurashi, E., Itoh, T., Suga, T. & Sawada, R., 2005, IEEE/LEOS Optical MEMS 2005: International Conference on Optical MEMS and Their Applications. p. 201-202 2 p. 1540149

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MOEMS
Surface emitting lasers
Temperature
Plasmas
Substrates

Modification of microscopic zirconia surface structure for improvement in tribological characteristics of uhmwpe-on-zirconia sliding pair for joint prostheses

Sawae, Y., Murakami, T., Qiwei, H. & Sawano, T., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 661-662 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joint prostheses
Ultrahigh molecular weight polyethylenes
Surface structure
Zirconia
Crystal microstructure

Quality improvement of micro metal injection moulding using micro/nano powders

Nishiyabu, K., Kakishita, K., Osada, T., Matsuzaki, S. & Tanaka, S., Jan 1 2005, Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), p. 357-363 7 p. (Euro PM 2005: Powder Metallurgy Congress and Exhibition; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Copper powder
injection molding
Injection molding
Powders
1 Citation (Scopus)

Rolling contact fatigue of bearing steel in hydrogen environment

Tanaka, H., Sugimura, J., Hashimoto, M. & Yamamoto, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 155-156 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Fatigue of materials
Hydrogen
Steel
1 Citation (Scopus)

Safe automatic emergency stop control of gantry crane including moving obstacles in its workspace

Yamamoto, M., Honda, E. & Mohri, A., Dec 1 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation. p. 253-258 6 p. 1570128. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gantry cranes
Cranes
Collision avoidance
Experiments
1 Citation (Scopus)

Stability-optimized clearance configuration of fluid-film journal bearings

Matsuda, K., Kanemitsu, Y. & Kijimoto, S., Dec 1 2005, Proceedings of the ASME International Design Engineering Techn. Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mechanical Vibration and Noise. p. 1097-1105 9 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 1 B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Journal bearings
Fluids
Rotors
Fourier series
4 Citations (Scopus)

Steady analysis of thermodynamic effect of partial cavitation using singularity method

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 2161-2167 7 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Surges (fluid)
Fluids
Heat conduction

Steady analysis of thermodynamic effect of partial cavitation using singularity method

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Forums, FEDSM2005. Vol. 2. p. 567-573 7 p. FEDSM2005-77387

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Surges (fluid)
Fluids
Heat conduction

Surface activated flip-chip bonding of laser chips

Higurashi, E., Suga, T., Nakagawa, M. & Sawada, R., 2005, Proceedings of the ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems: Advances in Electronic Packaging 2005. Vol. PART A. p. 793-796 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lasers
Surface emitting lasers
Plasmas
Substrates
Shear strength

The cooperative effects of protein and lipid on wear behavior of ultra-high molecular weight polyethylene

Sawae, Y. & Murakami, T., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 663-664 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrahigh molecular weight polyethylenes
Lipids
Wear of materials
Proteins
Lubricants

The potential of touch technology

Mochiyama, H., Sano, A., Takesue, N., Kikuuwe, R. & Fujimoto, H., Dec 1 2005, 2005 IEEE Workshop on Advanced Robotics and its Social Impacts. p. 210-213 4 p. 1511653. (2005 IEEE Workshop on Advanced Robotics and its Social Impacts; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Display devices
Textures
Inspection
Wire
Sensors

Thermal analysis on filling process in hydrogen tank

Koshimizu, T., Takata, Y., Kasao, D. & Monde, M., Dec 1 2005, Proceedings of the ASME Heat Transfer Division 2005. 1 ed. p. 141-148 8 p. (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; vol. 376 HTD, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermoanalysis
Hydrogen
Gases
Temperature
Numerical analysis
3 Citations (Scopus)

Three dimensional heat transmission simulation of supercritical pressure fluid

Kitou, K., Chaki, M., Ishii, Y., Matsuura, M., Shioiri, A., Mori, H. & Yoshida, S., 2005, Proceedings of the American Nuclear Society - International Congress on Advances in Nuclear Power Plants 2005, ICAPP'05. Vol. 4. p. 2255-2264 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluids
Turbulence models
Hot Temperature
Water
8 Citations (Scopus)

Tracking assist system using virtual friction field

Takesue, N., Kikuuwe, R., Sano, A., Mochiyama, H. & Fujimoto, H., Dec 1 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. p. 2134-2139 6 p. 1545292. (2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction
Industrial plants
Experiments

Wear reduction by functional protein boundary film on Poly(vinyl alcohol) hydrogel

Nakashima, K., Sawae, Y. & Murakami, T., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 655-656 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogels
Alcohols
Wear of materials
Proteins
Joint prostheses
2004

Activated wear by lubricant constituents in boundary lubrication and protective role of boundary lubrication in joint prostheses

Murakami, T., Sawae, Y., Doi, S., Yamamoto, K. & Takahara, A., Dec 1 2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joint prostheses
Lubrication
Lubricants
Wear of materials
Ultrahigh molecular weight polyethylenes
3 Citations (Scopus)

Effect of protein contained in lubricant for wear properties of pva hydrogel as artificial cartilage

Nakashima, K., Murakami, T. & Sawae, Y., Dec 1 2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cartilage
Hydrogels
Lubricants
Wear of materials
Polyvinyl acetates
2 Citations (Scopus)

Effects of lipids and proteins on wear of prosthetic hip joint materials

Sawae, Y., Murakami, T. & Sawano, T., 2004, Transactions - 7th World Biomaterials Congress. p. 342 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Prosthetics
Lipids
Wear of materials
Proteins
Joint prostheses
2 Citations (Scopus)

Nanostructuring of PEFC electrode catalysts using carbon nanofibers

Sasaki, K., Shinya, K., Tanaka, S., Furukawa, A., Ando, K., Kuroki, T., Kusaba, H. & Teraoka, Y., Dec 1 2004, Proton Conducting Membrane Fuel Cells IV - Proceedings of the International Symposium. p. 159-170 12 p. (Proceedings - Electrochemical Society; vol. PV 2004-21).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon nanofibers
Fuel cells
Electrolytes
Electrodes
Catalysts

Novel hydrides with [Al-H] bonding synthesized by hydrogenation of intermetallic compounds

Akiba, E., An, Z. Q. & Nakamura, Y., Jul 14 2004, Advanced Materials for Energy Conversion II. Chandra, D., Bautista, R. G. & Schlabach, L. (eds.). p. 83-90 8 p. (Advanced Materials for Energy Conversion II).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrides
Hydrogenation
Intermetallics
Binary alloys
Hydrogen
2 Citations (Scopus)

Study on Joule-Thomson micro-cooler

Naganuma, K., Takata, Y., Kubota, H. & Takahashi, K., Sep 29 2004, Proceedings of the Second International Conference on Microchannels and Minichannels (ICMM2004). Kandlikar, S. G., Celata, G. P., Nishio, S., Stephan, P. & Thonon, B. (eds.). p. 769-772 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Refrigerants
Capillary tubes
Evaporators
Silicones
Etching
1 Citation (Scopus)

Transient response analysis of polymer electrolyte fuel cell considering equivalent circuit, mass and heat conservation

Ito, K., Koori, H., Onda, K., Masuda, H. & Masuoka, T., Sep 13 2004, Fuel Cell Science, Engineering and Technology - 2004. Shah, R. K. & Kandlikar, S. G. (eds.). p. 85-92 8 p. (Fuel Cell Science, Engineering and Technology - 2004).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transient analysis
Equivalent circuits
Fuel cells
Conservation
Electrolytes
2003
3 Citations (Scopus)

Development of air/water two-phase flow centrifugal pump and its operating characteristics

Furukawa, A., Okuma, K., Ohshita, S. & Watanabe, S., Dec 1 2003, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 1, part B, Forums. Ogut, A., Tsuji, Y., Kawahashi, M., Ogut, A., Tsuji, Y. & Kawahashi, M. (eds.). p. 1413-1418 6 p. (Proceedings of the ASME/JSME Joint Fluids Engineering Conference; vol. 1 B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Two phase flow
Flow rate
Water
Pumps
15 Citations (Scopus)

Experiments and simple modelling of hydrodynamic lubrication in radial shaft seals

Sato, Y., Seki, K., Sugimura, J. & Yamamoto, Y., Dec 1 2003, 17th International Conference on Fluid Sealing. Hoyes, J. (ed.). p. 139-156 18 p. (International Conference on Fluid Sealing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lubrication
Seals
Rubber
Hydrodynamics
Surface roughness

Fatigue characteristics of aluminum cast alloy AC2B-T6 with cast skin

Ohama, S., Yoshimura, T. & Noguchi, H., Dec 1 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 55-63 9 p. (Advances in Damage Mechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Skin
Fatigue of materials
Aluminum
Microstructure
Vickers hardness
2 Citations (Scopus)

Feedback Control of Omni-Directional Vehicles Using Two Wheels Caster Type Odometer

Ushimi, N., Yamamoto, M. & Mohri, A., 2003, IEEE International Conference on Intelligent Robots and Systems. Vol. 4. p. 3540-3545 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feedback control
Wheels
Trajectories

Heat transfer characteristics of a natural circulation liquid cooling system for electronic components

Takamatsu, H., Honda, H., Wei, J. J. & Yamashiro, H., Mar 2003, 6th ASME/JSME Thermal Engineering Conference (CD-ROM). p. TED-AJ03-1

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Citations (Scopus)

Improved single crystalline mirror actuated electrostatically by terraced electrodes with high-aspect ratio torsion spring

Sawada, R., Yamaguchi, J., Higurashi, E., Shimizu, A., Yamamoto, T., Takeuchi, N. & Uenishi, Y., Jan 1 2003, 2003 IEEE/LEOS International Conference on Optical MEMS. Institute of Electrical and Electronics Engineers Inc., p. 153-154 2 p. 1233512. (2003 IEEE/LEOS International Conference on Optical MEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torsional stress
Aspect ratio
Mirrors
Crystalline materials
Electrodes

Influence of welding parameters on fatigue strength of spot-welded joint considering nugget size

Chaya, T., Yoshimura, T. & Noguchi, H., 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 321-331 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welding
Welds
Fatigue strength
Fatigue of materials
Heat transfer

Nanostructures of hydrogen absorbing alloys

Akiba, E., Enoki, H. & Nakamura, Y., Dec 1 2003, Processing and Fabrication of Advanced Materials XII. Srivatsan, T. S. & Varin, R. A. (eds.). p. 442-452 11 p. (Processing and Fabrication of Advanced Materials XII).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen
Nanostructures
Hydrogenation
Transmission electron microscopy
Rietveld analysis
3 Citations (Scopus)

Recognizing object surface properties using impedance perception

Kikuuwe, R. & Yoshikawa, T., Jan 1 2003, MHS 2003 - Proceedings of 2003 International Symposium on Micromechatronics and Human Science. Institute of Electrical and Electronics Engineers Inc., p. 251-258 8 p. 1249944. (MHS 2003 - Proceedings of 2003 International Symposium on Micromechatronics and Human Science).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface Properties
Electric Impedance
Surface properties
Stiffness matrix
Robots
4 Citations (Scopus)

Reliability problem prevention method for automotive components - Development of GD3 activity and DRBFM (Design Review Based on Failure Mode)-

Shimizu, H., Imagawa, T. & Noguchi, H., Dec 1 2003, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Failure modes
Systems analysis
Fault tree analysis
Innovation
2002

Boiling heat transfer to subcooled nitrogen from thin wire in narrow space

Takata, Y., Kubota, H. & Ito, T., Jan 1 2002, Heat Transfer. American Society of Mechanical Engineers (ASME), p. 199-204 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boiling liquids
Wire
Heat transfer
Nitrogen
Bubble formation
1 Citation (Scopus)

Effect of nesting of fiber bundles on micro fracture of laminated woven fabric composite

Osada, T., Nakai, A. & Hamada, H., Jan 1 2002, Textile Engineering. American Society of Mechanical Engineers (ASME), p. 37-40 4 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fibers
Composite materials
Laminating
Tensile testing
Optical microscopy

Effect of the size of micro-pin-fin on boiling heat transfer from silicon chips immersed in FC-72

Takamatsu, H., Honda, H. & Wei, J. J., Aug 2002, 12th International Heat Transfer Conference. Vol. 4. p. 75-80 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Flame propagation into lean region in stratified methane mixture

Kitagawa, T., Kido, H., Kim, K. S., Koga, H. & Fujioka, K., Dec 1 2002, Powertrain and Fluid Systems Conference and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Methane
Jet fuel
Flammability
Air
Ignition
6 Citations (Scopus)

Localization and obstacles detection using omni-directional vertical stereo vision

Matsuoka, T., Araoka, M., Hasegawa, T., Mohri, A., Yamamoto, M., Kiriki, T., Ushimi, N., Sugimoto, T., Inoue, J. & Yamaguchi, Y., Dec 1 2002, RoboCup 2001: Robot Soccer World Cup V. p. 429-434 6 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 2377 LNAI).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Obstacle Detection
3D Measurement
Autonomous Mobile Robot
Stereo vision
Stereo Vision
2 Citations (Scopus)

On-line navigation of mobile robot among moving obstacles using ultrasonic sensors

Ushimi, N., Yamamoto, M., Inoue, J., Sugimoto, T., Araoka, M., Matsuoka, T., Kiriki, T., Yamaguchi, Y., Hasegawa, T. & Mohri, A., Dec 1 2002, RoboCup 2001: Robot Soccer World Cup V. p. 477-483 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 2377 LNAI).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic sensors
Mobile Robot
Mobile robots
Navigation
Sensor
37 Citations (Scopus)

Single Si crystal 1024 ch MEMS mirror based on terraced electrodes and a high-aspect ratio torsion spring for 3-D cross-connect switch

Sawada, R., Yamaguchi, J., Higurashi, E., Shimizu, A., Yamamoto, T., Takeuchi, N. & Uenishi, Y., Jan 1 2002, 2002 IEEE/LEOS International Conference on Optical MEMs, OMEMS 2002 - Conference Digest. Institute of Electrical and Electronics Engineers Inc., p. 11-12 2 p. 1031419. (2002 IEEE/LEOS International Conference on Optical MEMs, OMEMS 2002 - Conference Digest).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torsional stress
MEMS
Aspect ratio
Mirrors
Switches
1 Citation (Scopus)

Study on cooperative multiple manipulators with passive joints

Hirano, G., Yamamoto, M. & Mohri, A., 2002, IEEE International Conference on Intelligent Robots and Systems. Vol. 3. p. 2855-2860 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manipulators
End effectors
2001

Absorption of water vapor by LiBr aqueous solution in a vertical smooth tube

Takamatsu, H., Yamashiro, H., Takata, N., Honda, H. & Kasatsugu, K., Nov 2001, IIR Conference of Commission B1 : Thermophysical Properties and Transfer Processes of New Refrigerants. p. 258-265 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

An interactive fuzzy satisficing approach using genetic algorithm for multi-objective problems

Kiyota, T., Tsuji, Y. & Kondo, E., 2001, Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS. Smith, M. H., Gruver, W. A. & Hall, L. O. (eds.). Vol. 2. p. 757-762 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Genetic algorithms
Multiobjective optimization
8 Citations (Scopus)

Feed-back control of crane based on inverse dynamics calculation

Yanai, N., Yamamoto, M. & Mohri, A., 2001, IEEE International Conference on Intelligent Robots and Systems. Vol. 1. p. 482-487 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cranes
Feedback control
State feedback
Linearization
Derivatives
4 Citations (Scopus)

Fuzzy-neuro control of an exoskeletal robot for human elbow motion support

Kiguchi, K., Kariya, S., Watanabe, K., Izumi, K. & Fukuda, T., Sep 15 2001, Proceedings - IEEE International Conference on Robotics and Automation. p. 3668-3673 6 p. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Controllers
Skin
15 Citations (Scopus)

Inverse dynamics analysis and trajectory generation of incompletely restrained wire-suspended mechanisms

Yanai, N., Yamamoto, M. & Mohri, A., 2001, Proceedings - IEEE International Conference on Robotics and Automation. Vol. 4. p. 3489-3494 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic analysis
Trajectories
Wire
Cranes
Kinematics
1 Citation (Scopus)

Novel hydrogen absorbing alloys with a BCC structure and their applications

Akiba, E., Enoki, H. & Nakamura, Y., Dec 1 2001, Processing and Fabrication of Advanced Materials X. Srivatsan, T. S., Varin, R. A., Srivatsan, T. S. & Varin, R. A. (eds.). p. 199-213 15 p. (Processing and Fabrication of Advanced Materials X).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen
Hydrides
Crystal structure
Solid solutions
Neutron diffraction

Short and long length-scale disturbances leading to rotating stall in an axial compressor stage with different stator/rotor gaps

Inoue, M., Kuroumaru, M., Yoshida, S. & Furukawa, M., Jan 1 2001, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stators
Compressors
Rotors
Wavelength
Wavelet transforms
4 Citations (Scopus)

Spectroscopic study of REMPI for rotational temperature measurement in highly rarefied gas flows

Mori, H., Ishida, T., Aoki, Y. & Niimi, T., Aug 30 2001, Rarefied Gas Dynamics: 22nd International Symposium. Bartel, T. J. & Gallis, M. A. (eds.). American Institute of Physics Inc., p. 956-963 8 p. (AIP Conference Proceedings; vol. 585).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

rarefied gases
gas flow
temperature measurement
ionization
plots
2000
8 Citations (Scopus)

A gradient-based approach to collision-free quasi-optimal trajectory planning of nonholonomic systems

Iwamura, M., Yamamoto, M. & Mohri, A., 2000, IEEE International Conference on Intelligent Robots and Systems. Vol. 3. p. 1734-1740 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Trajectories
Collision avoidance
Planning
Cost functions
Manipulators
9 Citations (Scopus)

Comparative studies on short and long length-scale stall cell propagating in an axial compressor rotor

Inoue, M., Kuroumaru, M., Tanino, T., Yoshida, S. & Furukawa, M., Jan 1 2000, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Pressure distribution
Vortex flow
Pressure transducers