Department of Mechanical Engineering

Research Output

Filter
Conference contribution
2012

Studies on the direct control of the start of HCCI combustion with rapid compression expansion machine

Komai, Y., Nakashima, F., Hashimoto, H., Moriue, O. & Murase, E., 2012, Proceedings of the 8th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2012. p. 446-451 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The effect of prestrain on fatigue property of precipitation strengthening stainless steel SUH660

Wu, H., Hamada, S. & Noguchi, H., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The effect of the laser beam wavelength and pulse width on micro grooving: Comparison of nanosecond and femtosecond laser

Nonaka, S., Mori, T., Takata, Y. & Kohno, M., Dec 1 2012, ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012. p. 275-280 6 p. (ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 735-743 9 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

The effects of strong oxidizing slurry and processing atmosphere on double-sided CMP of SiC wafer

Yin, T., Doi, T., Kurokawa, S., Ohnishi, O., Yamazaki, T., Wang, Z. & Tan, Z., Dec 19 2012, Manufacturing Engineering and Automation II. p. 1131-1134 4 p. (Advanced Materials Research; vol. 591-593).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Thermodynamic parameter on cavitation in space inducer

Yoshida, Y., Kikuta, K., Niiyama, K. & Watanabe, S., Dec 1 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th Int. Conference on Nanochannels, Microchannels, and M, FEDSM 2. p. 203-213 11 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Toward EEG control of upper limb power-assist exoskeletons: A preliminary study of decoding elbow joint velocities using EEG signals

Lalitharatne, T. D., Yoshino, A., Hayashi, Y., Teramoto, K. & Kiguchi, K., Dec 1 2012, 2012 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2012. p. 421-424 4 p. 6492482. (2012 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Vibration characteristics due to cavitation in stator element of automotive torque converter at stall condition

Watanabe, S., Otani, R., Kunimoto, S., Hara, Y., Furukawa, A. & Yamaguchi, T., Dec 1 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and M, FEDSM 2012. PARTS A AND B ed. Vol. 1. p. 535-541 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)
2011

A control method with pheromone information for transport system

Imoto, Y., Tsuji, Y. & Kondo, E., 2011, Proceedings of the 16th International Symposium on Artificial Life and Robotics, AROB 16th'11. p. 675-678 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Alternative dexterous object manipulation using torsional fingertip joints of multifingered hand

Tahara, K., Maruta, K. & Yamamoto, M., Jan 1 2011, 2011 Int. Symp. on Micro-NanoMechatronics and Human Science, Symp. on "COE for Education and Research of Micro-Nano Mechatronics", Symposium on "Hyper Bio Assembler for 3D Cellular System Innovation". IEEE Computer Society, p. 469-471 3 p. 6102234. (2011 Int. Symp. on Micro-NanoMechatronics and Human Science, Symp. on "COE for Education and Research of Micro-Nano Mechatronics", Symposium on "Hyper Bio Assembler for 3D Cellular System Innovation").

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A mathematical analysis of the minimum variance model of human-like reaching movements

Svinin, M. & Yamamoto, M., Dec 29 2011, IROS'11 - 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems: Celebrating 50 Years of Robotics. p. 4386-4391 6 p. 6048824. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Analytical optimization of heat exchanger dimensions of a joule-thomson microcooler

Widyaparaga, A., Kuwamoto, M., Noda, E., Sakoda, N., Kohno, M. & Takata, Y., Dec 1 2011, ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2011. p. 203-207 5 p. (ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analytic method on vibrate induced noise of engine block

Zheng, G. & Ohta, K., Oct 3 2011, Advanced Design Technology. p. 21-26 6 p. (Advanced Materials Research; vol. 308-310).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An experimental and theoretical study of the effect of lip surface roughness on lubrication of radial lip seals

Mizuta, H. & Sugimura, J., 2011, BHR Group - 21st International Conference on Fluid Sealing. p. 193-205 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Application of biofuels to solid oxide fuel cell

Shiratori, Y., Tran, T. Q., Takahashi, Y. & Sasaki, K., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 3 PART 3 ed. p. 2641-2651 11 p. (ECS Transactions; vol. 35, no. 3 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Citations (Scopus)

Carbon nanotube synthesis from metal nanoparticles sizeclassified by a differential mobility analyzer

Tomoda, M., Kawahara, T., Tasaki, Y., Takata, Y., Hirasawa, M., Seto, T. & Kohno, M., Dec 1 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011. (ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Characteristics of a monolithically integrated micro-displacement sensor

Takeshita, T., Peng, Y., Morita, N., Ando, H., Higurashi, E. & Sawada, R., Dec 1 2011, 14th Joint Int. IMEKO TC1, TC7, TC13 Symposium on Intelligent Quality Measurements - Theory, Education and Training 2011, Held in Conjunction with the 56th IWK Ilmenau University of Technology. p. 133-138 6 p. (14th Joint International IMEKO TC1, TC7, TC13 Symposium on Intelligent Quality Measurements - Theory, Education and Training 2011, Held in Conj. with the 56th IWK Ilmenau University of Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Characteristics of thermo-electromotive force, electric current and electric resistance in intermittent cutting process by face milling

Murata, M., Kurokawa, S., Ohnishi, O., Doi, T. & Uneda, M., Sep 26 2011, Advanced Manufacturing Technology. p. 1075-1078 4 p. (Advanced Materials Research; vol. 314-316).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Circulation of a vortex ring generated by pulsating jet flow

Akagi, F., Kawabata, K., Ando, Y., Yamaguchi, S. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 2911-2920 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Combustion properties of hydrogen/air mixture with and without dilution

Nagano, Y., Takeo, T., Tomari, K., Hayakawa, A., Kobayashi, S. & Kitagawa, T., Dec 1 2011, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cooperative investigations on degradation of cathode materials in segment-in-series cells by MHI

Yokokawa, H., Kishimoto, H., Yamaji, K., Horita, T., Watanabe, T., Yamamoto, T., Eguchi, K., Matsui, T., Sasaki, K., Shiratori, Y., Kawada, T., Sato, K., Hashida, T., Unemoto, A., Kabata, T. & Tomida, K., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 3 PART 3 ed. p. 2191-2200 10 p. (ECS Transactions; vol. 35, no. 3 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Current distribution analysis of a microtubular solid oxide fuel cell with surface temperature measurements

Nakajima, H. & Kitahara, T., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 2 PART 2 ed. p. 1087-1096 10 p. (ECS Transactions; vol. 35, no. 2 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Detached eddy simulation of unsteady flow field and prediction of aerodynamic sound in a half-ducted propeller fan

Kusano, K., Jeong, J. H., Yamada, K. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 713-722 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Development of a high efficiency and high reliable glass cleaning robot with a dirt detect sensor

Katsuki, Y., Ikeda, T. & Yamamoto, M., Dec 29 2011, IROS'11 - 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems: Celebrating 50 Years of Robotics. p. 5133-5138 6 p. 6048784. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Development of a laser-guided deep-hole measurement system with high-performance mechanical actuators

Katsuki, A., Sato, T., Ali, H., Sajima, T., Murakami, H., Berjaud, A., Ohnishi, O. & Doi, T., Dec 1 2011, Proceedings - ASPE 2011 Annual Meeting. p. 488-491 4 p. (Proceedings - ASPE 2011 Annual Meeting; vol. 52).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Development of an optical measurement system for five-degrees-of-freedom error motions of a micro high-speed spindle

Murakami, H., Katsuki, A., Onikura, H. & Sajima, T., Dec 1 2011, Proceedings - ASPE 2011 Annual Meeting. Vol. 52. p. 524-527 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of dual-layer PSP/TSP system for pressure and temperature measurements in low-speed flow field

Moon, K. J., Mori, H., Ambe, Y. & Kawabata, H., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 2767-2772 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Development of U-anchor CFRP rod manufacturing machine

Tabuchi, D., Sajima, T., Onikura, H., Ohnishi, O., Krokawa, S., Doil, T. & Ohta, T., Jan 17 2011, Advances in Building Materials. p. 2125-2128 4 p. (Advanced Materials Research; vol. 168-170).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic object manipulation using a multi-fingered hand-arm system: Enhancement of a grasping capability using relative attitude constraints of fingers

Kawamura, A., Tahara, K., Kurazume, R. & Hasegawa, T., Dec 28 2011, IEEE 15th International Conference on Advanced Robotics: New Boundaries for Robotics, ICAR 2011. p. 8-14 7 p. 6088574

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Effect of leading edge sweep on cavitation performance of two-bladed flat plate inducer

Igoshi, T., Uchinono, Y., Koroitamana, E., Ishizaka, K., Watanabe, S. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 289-296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of three-dimensional electric field and heat conduction to electrodes on the temperature rise during irreversible electroporation

Nomura, S., Kurata, K. & Takamatsu, H., Dec 1 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011. (ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Effects of CO2 and N2 dilutions on laminar and turbulent flame propagation

Hayakawa, A., Miki, Y., Kobayashi, S., Nagano, Y. & Kitagawa, T., Dec 1 2011, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Effects of diluent gases on combustion of coal gasification gas: Comparison between N 2and CO 2 dilutions

Nagano, Y., Kado, K., Takeo, T., Miki, Y. & Kitagawa, T., Dec 1 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011. (ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of metal counter surfaces on friction and wear of polymeric seal materials in hydrogen

Morita, T., Sato, F., Sawae, Y. & Sugimura, J., Dec 1 2011, BHR Group - 21st International Conference on Fluid Sealing. p. 167-178 12 p. (BHR Group - 21st International Conference on Fluid Sealing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Elastic deformation of surface roughness in thin film hydrodynamic lubrication

Yagi, K. & Sugimura, J., Dec 1 2011, ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. p. 155-157 3 p. (American Society of Mechanical Engineers, Tribology Division, TRIB).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrochemical performance of polymer electrolyte fuel cells using carbon-free SnO 2-supported Pt electrocatalysts

Kanda, K., Hayashi, S., Takasaki, F., Noda, Z., Taniguchi, S., Shiratori, Y., Hayashi, A. & Sasaki, K., Dec 1 2011, Polymer Electrolyte Fuel Cells 11. 1 ed. p. 2325-2331 7 p. (ECS Transactions; vol. 41, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Exchange current density of solid oxide fuel cell electrodes

Yonekura, T., Tachikawa, Y., Yoshizumi, T., Shiratori, Y., Ito, K. & Sasaki, K., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 2 PART 2 ed. p. 1007-1014 8 p. (ECS Transactions; vol. 35, no. 2 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

23 Citations (Scopus)

Experimental analysis of thermal and electric transport characteristics of nano-gaps

Ito, K., Hagio, T., Matsuo, A., Iwaisako, Y. & Nakabeppu, O., Dec 1 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011. (ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental stydy on performance of darrieus-type open hydroturbine with inlet nozzle in low downstream water level conditions

Hirowatari, K., Shimokawa, K., Iwamoto, S., Okuma, K., Watanabe, S., Matsusita, D. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 1851-1859 9 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Friction and wear of bronze filled PTFE and graphite filled PTFE in 40 MPA hydrogen gas

Sawae, Y., Miyakoshi, E., Doi, S., Watanabe, H., Kurono, Y. & Sugimura, J., Dec 1 2011, ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. p. 249-251 3 p. (American Society of Mechanical Engineers, Tribology Division, TRIB).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

High-backdrivable parallel-link manipulator with continuously variable transmission

Tahara, K., Iwasa, S., Naba, S. & Yamamoto, M., Dec 29 2011, IROS'11 - 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems: Celebrating 50 Years of Robotics. p. 1843-1848 6 p. 6048069. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Hydrophilic and hydrophobic double MPL coated GDL to enhance PEFC performance under low and high humidity conditions

Kitahara, T., Nakajima, H. & Mori, K., Dec 1 2011, Polymer Electrolyte Fuel Cells 11. 1 ed. p. 593-601 9 p. (ECS Transactions; vol. 41, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Improved velocity feedback for position control by using a quadratic sliding mode filter

Jin, S., Kikuuwe, R. & Yamamoto, M., Dec 1 2011, ICCAS 2011 - 2011 11th International Conference on Control, Automation and Systems. p. 1207-1212 6 p. 6106111. (International Conference on Control, Automation and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Impurity poisoning of SOFCs

Sasaki, K., Haga, K., Yoshizumi, T., Minematsu, D., Yuki, E., Liu, R. R., Uryu, C., Oshima, T., Taniguchi, S., Shiratori, Y. & Ito, K., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 3 PART 3 ed. p. 2805-2814 10 p. (ECS Transactions; vol. 35, no. 3 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Influence of SO 2 on the long-term durability of SOFC cathodes

Liu, R. R., Taniguchi, S., Shiratori, Y., Ito, K. & Sasaki, K., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 3 PART 3 ed. p. 2255-2260 6 p. (ECS Transactions; vol. 35, no. 3 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

20 Citations (Scopus)

Influences of gases on the tribological properties of pure iron

Fukuda, K. & Sugimura, J., 2011, ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. p. 241-243 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Iterative learning scheme for a redundant manipulator: Skilled hand writing motion on an arbitrary smooth surface

Tahara, K. & Arimoto, S., 2011, 2011 IEEE International Conference on Robotics and Automation, ICRA 2011. p. 4682-4687 6 p. 5979700

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Japan-Europe collaborative Droplet Array Combustion experiment in microgravity onboard TEXUS-46-technical achievements and preliminary scientific results

Kikuchi, M., Yamamoto, S., Yoda, S., Mikami, M., Nomura, H., Moriue, O., Umemura, A., Hisashi, Y., Sugano, N., Moesl, K., Sattelmayer, T., Eigenbrod, C. & Minster, O., Dec 1 2011, Proceedings of the 20th ESA Symposium on European Rocket and Balloon Programmes and Related Research. p. 473-478 6 p. (European Space Agency, (Special Publication) ESA SP; vol. 700 SP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low-temperature sealing for optical microsystem packages using Au-Au surface activated bonding in atmospheric pressure environment

Yamamoto, S., Higurashi, E., Suga, T. & Sawada, R., 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11. p. 1384-1387 4 p. 5969529

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Magnetic actuator using interaction between micro magnetic elements

Tsumori, F. & Brunne, J., Apr 13 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems, MEMS 2011. p. 1245-1248 4 p. 5734658. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)