Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
Conference contribution
2 Citations (Scopus)

Hybrid active noise barrier with sound masking

Wang, X., Koba, Y., Ishikawa, S. & Kijimoto, S., 2014, INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control. Australian Acoustical Society

Research output: Chapter in Book/Report/Conference proceedingConference contribution

masking
acoustics
conversation
loudness
privacy
1 Citation (Scopus)

Hydrogen-assisted cracking of Cr-Mo steel in slow strain rate tensile test with high-pressure gaseous hydrogen

Matsunaga, H., Yoshikawa, M., Kondo, R., Itoga, H., Yamabe, J. & Matsuoka, S., Jan 1 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strain rate
Hydrogen
Steel
Gases
Tensile strength

Hydrogen-assisted degradation of high-strength stainless steel with a newly developed aluminum-based coating in high-pressure hydrogen gas environment

Yamabe, J., Takakuwa, O., Awane, T. & Matsuoka, S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
Stainless steel
Aluminum
Degradation
Coatings

Hydrogen-assisted fatigue crack propagation in a commercially pure BCC iron

Birenis, D., Ogawa, Y., Matsunaga, H., Takakuwa, O., Prytz, Ø., Yamabe, J. & Thøgersen, A., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Iron
Hydrogen
Plastic deformation
Cracks

Hydrogen embrittlement of binary high Mn austenitic steels

Koyama, M., Sawaguchi, T. & Tsuzaki, K., Jan 1 2017, ICF 2017 - 14th International Conference on Fracture. Gdoutos, E. E. (ed.). International Conference on Fracture, p. 75-76 2 p. (ICF 2017 - 14th International Conference on Fracture; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen embrittlement
Austenitic steel
Martensite
Binary alloys
Austenite

Hydrogen exposure effect on tensile strength of high strength steel sharp notched specimen

Suzuki, Y., Itoga, H., Hamada, S. & Noguchi, H., Dec 1 2009, 12th International Conference on Fracture 2009, ICF-12. p. 3556-3563 8 p. (12th International Conference on Fracture 2009, ICF-12; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
tensile strength
Tensile strength
steel
hydrogen
1 Citation (Scopus)

Hydrogen gas effects on the fatigue crack growth behavior of Cr-Mo Steel CT specimen in extremely low rate range

Tazoe, K., Oda, Y. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Hydrogen
Steel
Gases
Helium

Hydrogen-induced ductility loss in cast irons

Usuda, T., Matsuno, K., Matsunaga, H., Yanase, K. & Endo, M., Apr 10 2013, Advanced Materials Science and Technology. p. 260-263 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

ductility
Cast iron
Graphite
Ductility
casts

Hydrogen-induced ductility loss of austenitic stainless steels for slow strain rate tensile testing in high-pressure hydrogen gas

Matsuoka, S., Yamabe, J. & Matsunaga, H., Jan 1 2017, Materials Structure and Micromechanics of Fracture VIII. Sandera, P. (ed.). Trans Tech Publications Ltd, p. 259-264 6 p. (Solid State Phenomena; vol. 258 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

austenitic stainless steels
Tensile testing
Austenitic stainless steel
ductility
strain rate
27 Citations (Scopus)

Hydrogen trapping character of nano-sized NbC precipitates in tempered martensite

Wei, F. G. & Tsuzaki, K., Dec 1 2009, Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials. p. 456-463 8 p. (Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

martensite
Martensite
Precipitates
Hydrogen
precipitates

Hydrogen trapping in X70 structural pipeline steel and weldments

Sezgin, J. G., Fjær, H. G., Matsunaga, H., Yamabe, J. & Oldeng, V., Jan 1 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 228-235 8 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pipelines
Hydrogen
Steel
Activation energy
Thermal desorption

Hydrogen uptake in hardened steels under repeated contact

Sugimura, J., Yamanaka, T. & Tanaka, H., Jan 1 2013, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), 1 p. (5th World Tribology Congress, WTC 2013; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Hydrogen

Hydrogen viscosity measurements with capillary tube under high pressure

Uehara, T., Yoshimura, K., Yusibani, E., Shinzato, K., Kohno, M. & Takata, Y., Dec 1 2013, ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013. V001T01A006. (ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Capillary tubes
Viscosity measurement
Hydrogen
Tube
Viscosity
2 Citations (Scopus)

Hydrophilic and hydrophobic double MPL coated GDL to enhance PEFC performance under low and high humidity conditions

Kitahara, T., Nakajima, H. & Mori, K., Dec 1 2011, Polymer Electrolyte Fuel Cells 11. 1 ed. p. 593-601 9 p. (ECS Transactions; vol. 41, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Atmospheric humidity
Electrolytes
Polyvinyl alcohols

Hydrotalcite-dispersed paper-structured catalyst for dry reforming of methane

Kakihara, Y., Shiratori, Y., Sakamoto, M., Takada, M., Uchida, T., Le, H. & Sasaki, K., Jan 1 2014, 20th World Hydrogen Energy Conference, WHEC 2014. Committee of WHEC2014, p. 1411-1415 5 p. (20th World Hydrogen Energy Conference, WHEC 2014; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reforming reactions
Solid oxide fuel cells (SOFC)
Methane
Catalysts
Electrochemical oxidation
1 Citation (Scopus)

Impact of balancing wedge action in textured hydrodynamic bearings

Yagi, K. & Sugimura, J., Jan 1 2013, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), p. 1009-1012 4 p. (5th World Tribology Congress, WTC 2013; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Hydrodynamics
1 Citation (Scopus)

Impact of high-speed image recognition of transition phenomenon of chip formation and chip flow in gear hobbing process

Umezaki, Y., Kurokawa, S. & Ariura, Y., Aug 18 2010, Measurement Technology and Intelligent Instruments IX. p. 189-193 5 p. (Key Engineering Materials; vol. 437).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Image recognition
Gears
Steel
High speed cameras
Video cameras

Impact of water flow rate on current efficiency in solid polymer water electrolyzer under 2 MPa condition

Ito, K., Maeda, Y., Sakaguchi, T., Inada, A. & Nakajima, H., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Shinohara, K., Narayanan, S. R., Swider-Lyons, K., Weber, A., Coutanceau, C., Mantz, R., Gasteiger, H. A., Jones, D., Edmundson, M., Mitsushima, S., Ramani, V., Meas, Y., Fuller, T., Uchida, H., Buchi, F. N., Perry, K. A., Schmidt, T. J., Fenton, J. M. & Strasser, P. (eds.). 3 ed. Electrochemical Society Inc., p. 1019-1028 10 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow rate
Cathodes
Polymers
Water
Hydrogen

Impedance spectra associated with metal deposition at the negative electrode from contaminating metal particles at the positive electrode in a lithium ion battery

Nakajima, H., Inada, A., Kitahara, T. & Nagata, Y., Jan 1 2016, Failure Mode and Mechanism Analyses. 23 ed. Electrochemical Society Inc., Vol. 75. p. 27-36 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrodes
Metals
Dissolution
Electrochemical impedance spectroscopy
Electrodeposition
1 Citation (Scopus)

Importance of protein denaturation to thermochemical ablation of liver tumors

Mori, S., Aravalli, R., Choi, J., Cressman, E. & Bischof, J., Dec 1 2011, ASME 2011 Summer Bioengineering Conference, SBC 2011. PARTS A AND B ed. p. 119-120 2 p. (ASME 2011 Summer Bioengineering Conference, SBC 2011; no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Denaturation
Ablation
Liver
Tumors
Proteins
15 Citations (Scopus)

Improved single crystalline mirror actuated electrostatically by terraced electrodes with high-aspect ratio torsion spring

Sawada, R., Yamaguchi, J., Higurashi, E., Shimizu, A., Yamamoto, T., Takeuchi, N. & Uenishi, Y., Jan 1 2003, 2003 IEEE/LEOS International Conference on Optical MEMS. Institute of Electrical and Electronics Engineers Inc., p. 153-154 2 p. 1233512. (2003 IEEE/LEOS International Conference on Optical MEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torsional stress
Aspect ratio
Mirrors
Crystalline materials
Electrodes
9 Citations (Scopus)

Improved velocity feedback for position control by using a quadratic sliding mode filter

Jin, S., Kikuuwe, R. & Yamamoto, M., Dec 1 2011, ICCAS 2011 - 2011 11th International Conference on Control, Automation and Systems. p. 1207-1212 6 p. 6106111. (International Conference on Control, Automation and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Position control
Friction
Feedback
Sensors
Derivatives
1 Citation (Scopus)

Improvement in drilling performance of micro compound tool

Ohnishi, O., Onikura, H., Eguchi, T., Aziz, M., Doi, T. & Kurokawa, S., Dec 29 2010, Advances in Precision Engineering. p. 96-100 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Drilling
Electroplating
Diamond
Peeling
Diamonds
1 Citation (Scopus)

Improvement of fatigue strength for titanium alloy compacts by MIM

Jungho, C., Osada, T., Kudo, K., Tsumori, F. & Miura, H., Jan 1 2015, Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015. Metal Powder Industries Federation, (Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
injection molding
titanium alloys
Titanium alloys
Injection molding
1 Citation (Scopus)

Improvement of mechanical properties in Ti alloys using heterogeneous elemental distribution

Emura, S., Min, X., Ii, S., Tsuzaki, K. & Tsuchiya, K., Dec 1 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 536-539 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermomechanical treatment
Alloying elements
Titanium alloys
Mechanical properties
Elongation
7 Citations (Scopus)

Improvement of Solid Oxide Fuel Cell by imprinted patterns on eelectrolyte

Xu, Y., Tsumori, F., Hashimoto, S., Takahashi, M., Kang, H., Osada, T. & Miura, H., Sep 2 2013, 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2013. p. 887-890 4 p. 6559865

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ceramics
Solid oxide fuel cells (SOFC)
Oxides
Electrolytes
Electrodes
3 Citations (Scopus)

Impurity poisoning of SOFCs

Sasaki, K., Haga, K., Yoshizumi, T., Minematsu, D., Yuki, E., Liu, R. R., Uryu, C., Oshima, T., Taniguchi, S., Shiratori, Y. & Ito, K., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 3 PART 3 ed. p. 2805-2814 10 p. (ECS Transactions; vol. 35, no. 3 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Impurities
Oxidants
Raw materials
Durability
5 Citations (Scopus)

Incorporating geometric algorithms in impedance- And admittance-type haptic rendering

Kikuuwe, R. & Fujimoto, H., Aug 28 2007, Proceedings - Second Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, World Haptics 2007. p. 249-254 6 p. 4145183. (Proceedings - Second Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, World Haptics 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Virtual reality
Damping
Experiments
7 Citations (Scopus)

Indentation-induced deformation behavior in martensitic steel observed through in-situ nanoindentation in a transmission electron microscopy

Ohmura, T., Minor, A., Tsuzaki, K. & Morris, J. W., Dec 1 2006, Nanomaterials by Severe Plastic Deformation, NanoSPD3 - Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastics Deformation. p. 239-244 6 p. (Materials Science Forum; vol. 503-504).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Martensitic steel
Nanoindentation
Indentation
Grain boundaries
Transmission electron microscopy

Indirect internal reforming SOFC accommodating graded-catalytic domain fabricated by paper-structured catalyst

Aydın, Matsumoto, G., Kubota, A., Tran, D. L., Sakamoto, M. & Shiratori, Y., Jan 1 2019, Solid Oxide Fuel Cells 16, SOFC 2019. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 1631-1640 10 p. (ECS Transactions; vol. 91, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reforming reactions
Solid oxide fuel cells (SOFC)
Catalysts
Thermal stress
Flow fields
3 Citations (Scopus)

Influence of alcohol consumption on blood flow as detected using a micro integrated laser Doppler blood flowmeter

Iwasaki, W., Ito, H., Nogami, H., Sawada, R., Takeuchi, S., Furue, M., Kimura, Y., Onoe, A. & Higurashi, E., Dec 1 2010, Proceedings - 1st International Conference on Sensor Device Technologies and Applications, SENSORDEVICES 2010. p. 236-241 6 p. 5632179. (Proceedings - 1st International Conference on Sensor Device Technologies and Applications, SENSORDEVICES 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flowmeters
Alcohols
Blood
Lasers
Sensors
1 Citation (Scopus)

Influence of ascorbic acid(AsA) concentration in culture medium on mechanical property of regenerated cartilage

Omata, S., Sawae, Y. & Murakami, T., Dec 1 2009, World Congress on Medical Physics and Biomedical Engineering: Biomaterials, Cellular and Tissue Engineering, Artificial Organs. 10 ed. p. 177-180 4 p. (IFMBE Proceedings; vol. 25, no. 10).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ascorbic acid
Cartilage
Ascorbic Acid
Culture Media
Mechanical properties

Influence of cathode polarization change on chromium deposited on electrolyte surface near cathode reaction sites of SOFC

Ishibashi, D., Park, E., Taniguchi, S., Inoue, Y., Chou, J. T. & Sasaki, K., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 1031-1037 7 p. (ECS Transactions; vol. 68, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Chromium
Cathodes
Electrolytes
Polarization
3 Citations (Scopus)

Influence of cathode polarization on the chromium poisoning of SOFC cathodes consisting of LSM, LSCF and LNF

Park, E., Taniguchi, S., Chou, J. T., Tachikawa, Y., Shiratori, Y. & Sasaki, K., 2012, Materials Degradation in Energy Systems: Corrosion and Hydrogen-Material Interactions. 30 ed. Vol. 50. p. 21-25 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Chromium
Cathodes
Polarization
Current density
2 Citations (Scopus)

Influence of convective heat transfer by air flow on local current/temperatures along microtubular solid oxide fuel cells in-situ identified by electrode-segmentation method for Co- and counter-flow configurations

Aydin, Ö., Nakajima, H. & Kitahara, T., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 2141-2150 10 p. (ECS Transactions; vol. 68, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Heat transfer
Electrodes
Air
Flow velocity
4 Citations (Scopus)

Influence of gas diffusion layers with microporous layer on the performance of polymer electrolyte fuel cells

Kitahara, T., Konomi, T. & Nakajima, H., Dec 1 2009, ECS Transactions -Proton Exchange Membrane Fuel Cells 9. 1 PART 2 ed. p. 1735-1744 10 p. (ECS Transactions; vol. 25, no. 1 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Electrolytes
Polymers
Atmospheric humidity
1 Citation (Scopus)

Influence of GDL coated with MPL containing CNTs on PEFC performance under low and high humidity conditions

Kitahara, T., Nakajima, H. & Okamura, K., 2014, Polymer Electrolyte Fuel Cells 14. 3 ed. Electrochemical Society Inc., Vol. 64. p. 477-483 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Carbon nanotubes
Atmospheric humidity
Electrolytes

Influence of hydrogen on tensile and fatigue life properties of 304/308 austenitic stainless steel butt welded joints

Okazaki, S., Matsunaga, H., Nakamura, M., Matsuoka, S. & Hamada, S., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Welds
Fatigue of materials
Hydrogen
Martensitic transformations
2 Citations (Scopus)

Influence of hydrophilic and hydrophobic double MPL coated GDL on PEFC performance

Kitahara, T., Nakajima, H., Mori, K. & Inamoto, M., Dec 1 2012, Polymer Electrolyte Fuel Cells 12, PEFC 2012. 2 ed. p. 437-444 8 p. (ECS Transactions; vol. 50, no. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Electrolytes
Atmospheric humidity
Polymers
4 Citations (Scopus)

Influence of hydrophilic and hydrophobic double MPL coated GDL on PEFC performance without cathode humidification

Kitahara, T., Nakajima, H. & Konomi, T., Dec 1 2010, Polymer Electrolyte Fuel Cells 10, PEFC 10. 1 PART 2 ed. Vol. 33. p. 1089-1097 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Cathodes
Electrolytes
Polyvinyl alcohols
4 Citations (Scopus)

Influence of hydrophilic and hydrophobic triple MPL coated GDL on the oxygen transport resistance in a PEFC under high humidity conditions

Kitahara, T., Nakajima, H. & Okamura, K., Jan 1 2015, Polymer Electrolyte Fuel Cells 15, PEFC 15. Gasteiger, H. A., Ramani, V. K., Fenton, J. M., Schmidt, T. J., Jones, D. J., Ayers, K. E., Perry, K. A., Fuller, T. F., Pivovar, B. S., Shinohara, K., Buchi, F. N., Mantz, R. A., Coutanceau, C., Strasser, P., Weber, A. Z., Swider-Lyons, K., Uchida, H., Edmundson, M., Mitsushima, S. & Narayanan, S. R. (eds.). 17 ed. Electrochemical Society Inc., p. 1313-1322 10 p. (ECS Transactions; vol. 69, no. 17).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Atmospheric humidity
Electrolytes
Oxygen
9 Citations (Scopus)

Influence of inclusions on fatigue characteristics of non-combustible Mg alloy

Kitahara, Y., Shimazaki, H., Yabu, T., Noguchi, H., Sakamoto, M. & Ueno, H., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 359-362 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Ignition
Particle size analysis
Machining
2 Citations (Scopus)

Influence of maximum assistive force of a soft wearable robotic suit on metabolic cost reduction

Jin, S., Guo, S., Hashimoto, K. & Yamamoto, M., Jan 29 2018, 2017 IEEE International Conference on Cybernetics and Intelligent Systems, CIS 2017 and IEEE Conference on Robotics, Automation and Mechatronics, RAM 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 146-150 5 p. (2017 IEEE International Conference on Cybernetics and Intelligent Systems, CIS 2017 and IEEE Conference on Robotics, Automation and Mechatronics, RAM 2017 - Proceedings; vol. 2018-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cost reduction
Robotics
Costs
Person
Energy Efficient
20 Citations (Scopus)

Influence of SO 2 on the long-term durability of SOFC cathodes

Liu, R. R., Taniguchi, S., Shiratori, Y., Ito, K. & Sasaki, K., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 3 PART 3 ed. p. 2255-2260 6 p. (ECS Transactions; vol. 35, no. 3 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strontium
Solid oxide fuel cells (SOFC)
Durability
Cathodes
Sulfur

Influence of water vapor in hydrogen gas on the friction and wear of cobalt-based alloy

Morita, T., Iwao, T., Fukuda, K. & Sugimura, J., Dec 1 2009, World Tribology Congress 2009 - Proceedings. 1 p. (World Tribology Congress 2009 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steam
Cobalt
Water vapor
Hydrogen
Adhesion

Influence of welding parameters on fatigue strength of spot-welded joint considering nugget size

Chaya, T., Yoshimura, T. & Noguchi, H., 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 321-331 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welding
Welds
Fatigue strength
Fatigue of materials
Heat transfer
14 Citations (Scopus)

Influences of axial gap between blade rows on secondary flows and aerodynamic performance in a turbine stage

Yamada, K., Funazaki, K., Kikuchi, M. & Sato, H., Dec 1 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. p. 1039-1049 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Secondary flow
Aerodynamics
Turbines
Flow fields
Stators
11 Citations (Scopus)

Influences of gas diffusion layer design parameters on the performance of polymer electrolyte fuel cells

Kitahara, T., Konomi, T., Murata, M., Berg, N. & Wilde, P. M., Dec 1 2007, ECS Transactions - 30th Fuel Cell Seminar. 1 ed. Vol. 5. p. 27-36 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Atmospheric humidity
Electrolytes
Polymers
2 Citations (Scopus)

Influences of gases on the tribological properties of pure iron

Fukuda, K. & Sugimura, J., 2011, ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. p. 241-243 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrahigh vacuum
Argon
Iron
Gases
Hydrogen
1 Citation (Scopus)

Influences of impeller diameter and diffuser blades on air-water two-phase flow performance of centrifugal pump

Matsushita, N., Furukawa, A., Okuma, K. & Watanabe, S., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 1704-1709 6 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Two phase flow
Flow rate
Air
Water