Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
Conference contribution

Locally global active noise control based on wavefront synthesis

Wang, X., Koba, Y., Ishikawa, S. & Kijimoto, S., 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Active noise control
Wavefronts
Control systems
synthesis
Acoustic noise
1 Citation (Scopus)

Local magnetization and sensing of flexible magnetic tag for long-term monitoring under wet environment

Yamanishi, Y., Matsumura, D., Fujiwara, Y., Ohgawara, T. & Haramoto, Y., Jul 26 2017, TRANSDUCERS 2017 - 19th International Conference on Solid-State Sensors, Actuators and Microsystems. Institute of Electrical and Electronics Engineers Inc., p. 460-463 4 p. 7994086. (TRANSDUCERS 2017 - 19th International Conference on Solid-State Sensors, Actuators and Microsystems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

genes
Magnetization
Genes
magnetic signals
Magnetic permeability
3 Citations (Scopus)

Low-cycle fatigue behavior and microstructural evolution of the Fe- 30Mn-4Si-2Al alloy

Nikulin, I., Sawaguchi, T., Ogawa, K. & Tsuzaki, K., Jan 1 2014, THERMEC 2013. Trans Tech Publications Ltd, p. 944-949 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microstructural evolution
Fatigue of materials
hardening
cycles
Hardening

Low-cycle fatigue properties of the Fe-30Mn-(6-x)Si-xAl TRIP/TWIP alloys

Nikulin, I., Sawaguchi, T. & Tsuzaki, K., Jan 1 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 665-671 7 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Yield stress
Hardening
Tensile properties
Strain hardening
2 Citations (Scopus)

Low-force kinesthetic guidance for accurate positioning and tracking

Kikuuwe, R., Yamamoto, T. & Fujimoto, H., Nov 17 2006, 14th Symposium onHaptics Interfaces for Virtual Environment andTeleoperator Systems 2006 - Proceedings. p. 491-498 8 p. 1627114. (14th Symposium onHaptics Interfaces for Virtual Environment andTeleoperator Systems 2006 - Proceedings; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sliding mode control
Manipulators
Robotics
Actuators
Torque
4 Citations (Scopus)

Low noise design of diesel engine induced by piston slap

Suganuma, N., Yoshizumi, K., Honda, I. & Ohta, K., Dec 1 2006, 13th International Congress on Sound and Vibration 2006, ICSV 2006. p. 5673-5680 8 p. (13th International Congress on Sound and Vibration 2006, ICSV 2006; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

diesel engines
pistons
low noise
engine noise
moments
1 Citation (Scopus)

Low-power and high-sensitive pH sensor for monitoring of cow-rumen in real time

Zhang, L., Lu, J., Okada, H., Nogami, H., Itoh, T. & Arai, S., Jan 5 2017, IEEE Sensors, SENSORS 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 7808892

Research output: Chapter in Book/Report/Conference proceedingConference contribution

pH sensors
Monitoring
Sensors
MOSFET devices
Tin oxides
10 Citations (Scopus)

Low-power consumption integrated laser Doppler blood flowmeter with a built-in silicon mierolens

Kimura, Y., Onoe, A., Higurashi, E. & Sawada, R., Oct 23 2008, 2008 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OPT MEMS. p. 13-14 2 p. 4607804. (2008 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OPT MEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flowmeters
Photodiodes
Semiconductor lasers
Electric power utilization
Blood
4 Citations (Scopus)

Low temperature Au-Au surface-activated bonding using nitrogen atmospheric-pressure plasma treatment for optical microsystems

Matsuoka, S., Yamamoto, M., Higurashi, E., Suga, T. & Sawada, R., May 20 2015, ICEP-IAAC 2015 - 2015 International Conference on Electronic Packaging and iMAPS All Asia Conference. Institute of Electrical and Electronics Engineers Inc., p. 850-853 4 p. 7111132. (ICEP-IAAC 2015 - 2015 International Conference on Electronic Packaging and iMAPS All Asia Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microsystems
Atmospheric pressure
Nitrogen
Plasmas
Photoelectron spectroscopy
7 Citations (Scopus)

Low-temperature bonding of laser diode chips on Si substrates with oxygen and hydrogen atmospheric-pressure plasma activation

Takigawa, R., Higurashi, E., Suga, T. & Sawada, R., Nov 25 2009, 2009 International Conference on Electronic Packaging Technology and High Density Packaging, ICEPT-HDP 2009. p. 475-477 3 p. 5270708. (2009 International Conference on Electronic Packaging Technology and High Density Packaging, ICEPT-HDP 2009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atmospheric pressure
Semiconductor lasers
Chemical activation
Plasmas
Hydrogen
4 Citations (Scopus)

Low-temperature bonding of laser diode chips using atmospheric-pressure plasma activation of flat topped Au stud bumps with smooth surfaces

Yamamoto, M., Sato, T., Higurashi, E., Suga, T. & Sawada, R., Dec 1 2012, 2012 2nd IEEE CPMT Symposium Japan, ICSJ 2012. 6523387

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atmospheric pressure
Semiconductor lasers
Chemical activation
Plasmas
Current voltage characteristics
1 Citation (Scopus)

Low-temperature bonding of optical chips using coined Au stud bumps and its application to micro laser Doppler velocimeter

Yamamoto, M., Sato, T., Higurashi, E., Suga, T. & Sawada, R., Aug 15 2012, Proceedings of 2012 3rd IEEE International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2012. 1 p. 6238061

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser Doppler velocimeters
Semiconductor lasers
Thin films
Microsensors
Shear strength

Low-temperature bonding of photodiodes on glass substrate using AU stud bumps and its application to microsensors with three-dimensional structure

Higurashi, E., Chino, D., Suga, T. & Sawada, R., Dec 11 2009, TRANSDUCERS 2009 - 15th International Conference on Solid-State Sensors, Actuators and Microsystems. p. 1873-1876 4 p. 5285712. (TRANSDUCERS 2009 - 15th International Conference on Solid-State Sensors, Actuators and Microsystems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microsensors
Photodiodes
Glass
Substrates
Temperature

Low temperature direct bonding of flip-chip mounting VCSEL to Si substrate

Imamura, T., Higurashi, E., Suga, T. & Sawada, R., Dec 1 2006, 2006 International Microsystems, Packaging,Assembly Conference Taiwan, IMPACT - Proceedings of Technical Papers. p. 185-188 4 p. 4107477. (2006 International Microsystems, Packaging,Assembly Conference Taiwan, IMPACT - Proceedings of Technical Papers).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface emitting lasers
Mountings
Substrates
Temperature
Argon
1 Citation (Scopus)

Low-temperature direct flip-chip bonding for integrated micro-systems

Higurashi, E., Suga, T. & Sawada, R., 2005, 18th Annual Meeting of the IEEE Lasers and Electro-Optics Society, LEOS 2005. Vol. 2005. p. 121-122 2 p. 1547908

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface emitting lasers
Temperature
Plasmas
Substrates
Shear strength
1 Citation (Scopus)

Low-temperature gold-gold bonding using argon and hydrogen gas mixture atmospheric-pressure plasma treatment for optical microsystems

Higurashi, E., Yamamoto, M., Ikeda, S., Suga, T. & Sawada, R., Oct 14 2014, 2014 International Conference on Optical MEMS and Nanophotonics, OMN 2014 - Proceedings. IEEE Computer Society, p. 89-90 2 p. 6924607. (International Conference on Optical MEMS and Nanophotonics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Argon
Microsystems
Gas mixtures
Gold
Atmospheric pressure
7 Citations (Scopus)

Low-temperature LD direct bonding for highly functional optical MEMS

Higurashi, E., Itoh, T., Suga, T. & Sawada, R., 2005, IEEE/LEOS Optical MEMS 2005: International Conference on Optical MEMS and Their Applications. p. 201-202 2 p. 1540149

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MOEMS
Surface emitting lasers
Temperature
Plasmas
Substrates
2 Citations (Scopus)

Low-temperature sealing for optical microsystem packages using Au-Au surface activated bonding in atmospheric pressure environment

Yamamoto, S., Higurashi, E., Suga, T. & Sawada, R., 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11. p. 1384-1387 4 p. 5969529

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microsystems
Atmospheric pressure
Temperature
Packaging
Ultrahigh vacuum
11 Citations (Scopus)

Magnetic actuator using interaction between micro magnetic elements

Tsumori, F. & Brunne, J., Apr 13 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems, MEMS 2011. p. 1245-1248 4 p. 5734658. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnetic actuators
Actuators
actuators
interactions
Magnetic fields
1 Citation (Scopus)

Magnetically driven micro-movable electrode for cell coupling

Yamanishi, Y., Kawahara, T., Iyanagi, T., Hagiwara, M. & Arai, F., Dec 1 2010, 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010, MicroTAS 2010. p. 905-907 3 p. (14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010, MicroTAS 2010; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fusion reactions
Electrodes
Microelectrodes
Nickel
Electric fields
30 Citations (Scopus)

Magnetically modified PDMS microtools for micro particle manipulation

Yamanishi, Y., Lin, Y. C. & Arai, F., Dec 1 2007, Proceedings of the 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2007. p. 753-758 6 p. 4399151. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polydimethylsiloxane
Stiction
Cell immobilization
Biochips
Lab-on-a-chip

Magnetically modified polymeric microsorter for on-chip particle manipulations

Yamanishi, Y., Sakuma, S., Onda, K. & Arai, F., Dec 1 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. p. 570-575 6 p. 4650908. (2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sorting
Contamination
Cells
Cloning
Polydimethylsiloxane

Magnetic properties of Fe-6.5Si powder injection molded materials

Miura, H., Tanaka, Y., Osada, T., Tokuoka, T., Nishioka, T. & Ikegaya, A., Dec 1 2008, Advances in Powder Metallurgy and Particulate Materials - 2008, Proceedings of the 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008. p. 4144-4152 9 p. (Advances in Powder Metallurgy and Particulate Materials - 2008, Proceedings of the 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grain growth
Powders
Magnetic properties
injection
magnetic properties

Magnetization-Free Micro-Tag for Biometric Identification under Water

Oguma, K., Sato, T., Kawahara, T., Haramoto, Y. & Yamanishi, Y., Jun 1 2019, 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII. Institute of Electrical and Electronics Engineers Inc., p. 1098-1101 4 p. 8808239. (2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

biometrics
Magnetooptical effects
Biometrics
Magnetization
Sensing
10 Citations (Scopus)

Magneto-FEM analysis for micro actuator using array of magnetic elements

Tsumori, F., Hatama, K., Kang, H., Osada, T. & Miura, H., Sep 2 2013, 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2013. p. 845-848 4 p. 6559857. (8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite Element Analysis
Magnetic Fields
Actuators
Magnetic actuators
Finite element method

Manipulation of 2D object with arbitrary shape by robot finger under rolling constraint

Yoshida, M., Arimoto, S. & Tahara, K., 2009, ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings. p. 695-699 5 p. 5334288

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Equations of motion
Differential equations
Geometry
Computer simulation

Mass nature of heat and its applications III: Thermomass model based damped wave in dielectrics

Hou, Q. W. & Wang, H., Dec 1 2010, 2010 14th International Heat Transfer Conference, IHTC 14. (2010 14th International Heat Transfer Conference, IHTC 14; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat conduction
Silicon
Laser pulses
Damping
Hot Temperature

Mass nature of heat and its applications IV: Thermal wave and periodic temperature oscillation in metallic films heated by ultra-short pulsed lasers

Wang, H., Ma, W., Zhang, X. & Wang, W., Dec 1 2010, 2010 14th International Heat Transfer Conference, IHTC 14. p. 321-326 6 p. (2010 14th International Heat Transfer Conference, IHTC 14; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metallic films
Pulsed lasers
Laser heating
Electron temperature
Ultrashort pulses
2 Citations (Scopus)

Mass transfer in an anode-supported honeycomb solid oxide fuel cell

Kotake, S., Nakajima, H. & Kitahara, T., Jan 1 2015, Student Poster Session (General) - 226th ECS Meeting. Johnson, C. S., Chaitanya, V., Subramanian, V. R., Pharkya, P., Sundaram, K. B. & Lara-Castro, R. H. (eds.). 45 ed. Electrochemical Society Inc., p. 135-142 8 p. (ECS Transactions; vol. 64, no. 45).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Anodes
Mass transfer
Substrates
Cathodes

Mathematical Modeling and Motion Analysis of the Wheel Based Ball Retaining Mechanism

Kimura, K., Ishii, K., Takemura, Y. & Yamamoto, M., Dec 28 2016, Proceedings - 2016 Joint 8th International Conference on Soft Computing and Intelligent Systems and 2016 17th International Symposium on Advanced Intelligent Systems, SCIS-ISIS 2016. Institute of Electrical and Electronics Engineers Inc., p. 518-523 6 p. 7801702. (Proceedings - 2016 Joint 8th International Conference on Soft Computing and Intelligent Systems and 2016 17th International Symposium on Advanced Intelligent Systems, SCIS-ISIS 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion Analysis
Mathematical Modeling
Wheel
Wheels
Ball

Measurement of Axial Position of a Microsphere Using Chromatic Confocal System for Probe System Based on the Laser Trapping with the Standing Wave Scale

Ueda, S. I., Michihata, M., Hayashi, T. & Takaya, Y., Jan 1 2014, 2014 International Symposium on Optomechatronic Technologies, ISOT 2014. Institute of Electrical and Electronics Engineers Inc., p. 223-227 5 p. 7119424. (2014 International Symposium on Optomechatronic Technologies, ISOT 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microspheres
Lasers
Interpolation
Scanning
Wavelength
1 Citation (Scopus)

Measurement of current-density in PEFC with NMR sensors

Ogawa, K., Yokouchi, Y., Haishi, T. & Ito, K., 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuel cells
Current density
Electrolytes
Nuclear magnetic resonance
Membranes

Measurement of effective thermal conductivity of CNT-nanofluids by transient short-wire method

Kohno, M., Kimura, K., Moroe, S., Takata, Y., Woodfield, P. L. & Fujii, M., Jul 12 2010, Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009. p. 407-412 6 p. (Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermal conductivity
Wire
Thermal diffusivity
Water
Volume fraction
1 Citation (Scopus)

Measurement of equilibrium adsorption and adsorption/desorption rate of water vapor to a silica gel thin film coated on a cross fin tube heat exchanger

Hamamoto, Y., Ouchi, T. & Mori, H., 2016, ACRA 2016 - 8th Asian Conference on Refrigeration and Air-Conditioning. Asian Conference on Refrigeration and Air Conditioning (ACRA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

tube heat exchangers
Tubes (components)
Silica gel
silica gel
fins
1 Citation (Scopus)

Measurement of hydrogen-gas solubility and diffusivity in polymer electrolyte membrane by NMR method

Nagahisa, R., Kuriya, D., Ogawa, K., Takata, Y. & Ito, K., Dec 1 2011, Polymer Electrolyte Fuel Cells 11. 1 ed. Vol. 41. p. 1423-1430 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solubility
Electrolytes
Nuclear magnetic resonance
Membranes
Hydrogen
1 Citation (Scopus)

Measurement of static constraints imposed by a human hand on a grasped object

Matsuo, K., Murakami, K., Hasegawa, T., Tahara, K. & Kurazume, R., 2009, 2009 International Conference on Advanced Robotics, ICAR 2009. 5174670

Research output: Chapter in Book/Report/Conference proceedingConference contribution

End effectors
Demonstrations
Experiments

Measurement of thermal conductivities of liquid mixtures by using a small bead thermistor

Takamatsu, H., Tetsu, F. & Fujii, M., Nov 1986, 1st Asian Thermophysical Properties Conference. p. 462-467 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Measurement of tooth pair deflections with ultra high resolution encoders and prediction of transmission error under load in high precision

Kurokawa, S. & Ariura, Y., Jun 13 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 99-108 10 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Encoder
Deflection
High Resolution
Gear teeth
Prediction

Measurements of adsorption/desorption rate of a film adsorbent synthesized on heat transfer plate controlled by adsorbent temperature in water vapor

Ouchi, T., Hamamoto, Y. & Mori, H., Jan 1 2015, 24th IIR International Congress of Refrigeration, ICR 2015. International Institute of Refrigeration, p. 599-606 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plates (structural components)
adsorbents
Adsorbents
Water vapor
water vapor
87 Citations (Scopus)

Mechanical designs of active upper-limb exoskeleton robots state-of-the-art and design difficulties

Gopura, R. A. R. C. & Kiguchi, K., Nov 17 2009, 2009 IEEE International Conference on Rehabilitation Robotics, ICORR 2009. p. 178-187 10 p. 5209630. (2009 IEEE International Conference on Rehabilitation Robotics, ICORR 2009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Patient rehabilitation
Exoskeleton (Robotics)
Robotics
1 Citation (Scopus)

Mechanical properties of injection molded superalloy (rene 95) compacts at high temperature

Miura, H., Osada, T., Morinaka, S., Kang, H. & Tsumori, F., Dec 1 2012, Advances in Powder Metallurgy and Particulate Materials - 2012, Proceedings of the 2012 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2012. p. 428-434 7 p. (Advances in Powder Metallurgy and Particulate Materials - 2012, Proceedings of the 2012 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Superalloys
Injection molding
Mechanical properties
Aerospace applications
1 Citation (Scopus)

Mechanical vibration applied in the absence of weight bearing suggest improved Fragile bone

Matsuda, J., Kurata, K., Hara, T. & Higaki, H., Dec 1 2009, 13th International Conference on Biomedical Engineering - ICBME 2008. p. 1766-1768 3 p. (IFMBE Proceedings; vol. 23).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Bone
Weightlessness
Space flight
Tomography
2 Citations (Scopus)

Mechanism of hydrogen-assisted surface crack growth of austenitic stainless steels in slow Strain rate Tensile test

Matsuoka, S., Yamabe, J. & Matsunaga, H., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Strain rate
Crack propagation
Hydrogen
Cracks
1 Citation (Scopus)

Mechanism study for micro surgical robotic system that can induce multisensory illusion

Arata, J., Hattori, M., Sakaguchi, M., Nakadate, R., Oguri, S. & Hashizume, M., Feb 18 2014, 2014 Joint 7th International Conference on Soft Computing and Intelligent Systems, SCIS 2014 and 15th International Symposium on Advanced Intelligent Systems, ISIS 2014. Institute of Electrical and Electronics Engineers Inc., p. 1238-1242 5 p. 7044833

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Surgery
Time delay
Feedback
1 Citation (Scopus)

Metal-oxide-supported ir-decorated electrocatalysts for polymer electrolyte membrane water electrolysis

Yasutake, M., Anai, H., Kavvachino, D., Noda, Z., Matsuda, J., Ito, K., Hayashi, A. & Sasaki, K., Jan 1 2018, ECS Transactions. Coutanceau, C., Narayan, S., Kim, Y-T., Gochi-Ponce, Y., Pivovar, B. S., Fuller, T. F., Mantz, R. A., Shirvanian, P., Jones, D. J., Buechi, F., Ramani, V. K., Fenton, J. M., Swider-Lyons, K. E., Schmidt, T. J., Ayers, K. E., Weber, A. Z., Pintauro, P. N., Strasser, P., Xu, H., Mitsushima, S., Gasteiger, H. & Uchida, H. (eds.). 13 ed. Electrochemical Society Inc., p. 673-682 10 p. (ECS Transactions; vol. 86, no. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Electrolysis
Catalyst supports
Electrolytes
Membranes
4 Citations (Scopus)

Method of analysis for two-dimensional stationary thermoelastic problems by body force method

Nisitani, H., Saimoto, A., Noguchi, H. & Chen, D. H., 1992, American Society of Mechanical Engineers, EEP. Publ by ASME, Vol. 1. p. 437-446 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Temperature distribution
Heat transfer
Cracks
Temperature
Hot Temperature
1 Citation (Scopus)

Methods of material testing in high-pressure hydrogen environment and evaluation of hydrogen compatibility of metallic materials – Current status in Japan

Kobayashi, H., Kobayashi, H., Sano, T., Maeda, T., Tamura, H., Ishizuka, A., Kimura, M., Yoshikawa, N., Iijima, T., Yamabe, J., Matsuoka, S. & Matsunaga, H., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Materials testing
Hydrogen
Testing
Standardization
Automobiles
11 Citations (Scopus)

Mg-Ni ALLOYS AS HYDROGEN TRANSPORTING MEDIA.

Ono, S., Ishido, Y., Akiba, E., Jindo, K., Sawada, Y., Kitagawa, I. & Kakutani, T., Dec 1 1984, Advances in Hydrogen Energy. Veziroglu, T. N. & Taylor, J. B. (eds.). Pergamon Press, p. 1291-1302 12 p. (Advances in Hydrogen Energy; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen
Gases
Hydrides
Purification
Containers

Micro-analyses of small cracks in 6061-T6 aluminium alloy subjected to high-cycle fatigue

Takahashi, Y., Shikama, T. & Noguchi, H., Dec 6 2012, Advances in Fracture and Damage Mechanics XI. p. 213-216 4 p. (Key Engineering Materials; vol. 525-526).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum alloys
Fatigue of materials
Cracks
Focused ion beams
Band structure
4 Citations (Scopus)

Micro-aquatic-farm: On chip stimulation and evaluation system for microorganisms by magnetically driven microtools

Kawahara, T., Sugita, M., Hagiwara, M., Yamanishi, Y., Arai, F., Kawano, H., Shihira-Ishikawa, I. & Miyawaki, A., Sep 1 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11. p. 1946-1949 4 p. 5969408. (2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microorganisms
Farms
Sensors
Permanent magnets
Friction