Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
Conference contribution
1 Citation (Scopus)

Surface wettability and subcooling on nucleate pool boiling heat transfer

Suroto, B. J., Kohno, M. & Takata, Y., Feb 9 2018, 1st International Conference and Exhibition on Powder Technology Indonesia, ICePTi 2017. Joni, I. M. & Panatarani, C. (eds.). American Institute of Physics Inc., 030047. (AIP Conference Proceedings; vol. 1927).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

wettability
boiling
heat transfer
heat flux
copper
3 Citations (Scopus)

Surface wettability effects in heat and fluid flow

Takata, Y., 2006, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006. Vol. 2006 B. p. 1333-1341 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wetting
Flow of fluids
Heat transfer
Boiling liquids
Contact angle

Synchronous observation with friction measurement prior to and during occurrence of scuffing

Yagi, K., Sugimura, J., Kajita, S., Ohmori, T. & Suzuki, A., Dec 1 2010, STLE/ASME 2010 International Joint Tribology Conference, IJTC2010. p. 361-363 3 p. (American Society of Mechanical Engineers, Tribology Division, TRIB).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction
Aluminum Oxide
Steel
Point contacts
Plastic flow

Synthesis of single walled carbon nanotubes by laser vaporized catalytic chemical vapor deposition technique

Yamamoto, S., Onaka, Y., Suzuki, S., Maruyama, S., Tani, K., Takata, Y., Shibuta, Y. & Kohno, M., Dec 1 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 387-393 7 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Single-walled carbon nanotubes (SWCN)
Chemical vapor deposition
carbon nanotubes
vapor deposition
Lasers
2 Citations (Scopus)

Task based motion intention prediction with EEG signals

Bandara, D. S. V., Arata, J. & Kigichi, K., Oct 11 2017, IRIS 2016 - 2016 IEEE 4th International Symposium on Robotics and Intelligent Sensors: Empowering Robots with Smart Sensors. Institute of Electrical and Electronics Engineers Inc., p. 57-60 4 p. (IRIS 2016 - 2016 IEEE 4th International Symposium on Robotics and Intelligent Sensors: Empowering Robots with Smart Sensors).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

electroencephalography
Electroencephalography
Motion
Prediction
predictions
3 Citations (Scopus)

Task estimation of upper-limb using EEG and EMG signals

Kiguchi, K. & Hayashi, Y., Jan 1 2014, AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 548-553 6 p. 6878135. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Robots
Electrodes
3 Citations (Scopus)

Task-oriented perception-assist for an upper-limb power-assist exoskeleton robot

Kiguchi, K., Kose, Y. & Hayashi, Y., Dec 1 2010, 2010 World Automation Congress, WAC 2010. 5665314. (2010 World Automation Congress, WAC 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Patient rehabilitation
Robots
Experiments
Exoskeleton (Robotics)

Temperature dependence of fatigue crack growth in low-alloy steel under gaseous hydrogen

Takakuwa, O., Yoshikawa, M., Matsuoka, S., Yamabe, J., Okazaki, S. & Matsunaga, H., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
High strength steel
Hydrogen
Temperature
Binding energy
7 Citations (Scopus)

Temperature measurement in through-plane direction in PEFC with a fabricated in-line thermocouple and supporter

Lee, S. K., Ito, K. & Sasaki, K., Dec 1 2009, ECS Transactions - Proton Exchange Membrane Fuel Cells 9. 1 PART 1 ed. p. 495-503 9 p. (ECS Transactions; vol. 25, no. 1 PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermocouples
Temperature measurement
Fuel cells
Electrolytes
Polymers
3 Citations (Scopus)

Tensile-and fatigue-properties of low alloy steel JIS-SCM435 and carbon steel JIS-SM490B in 115 MPA hydrogen gas

Matsunaga, H., Yoshikawa, M., Itoga, H., Yamabe, J., Hamada, S. & Matsuoka, S., Jan 1 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
Carbon steel
Fatigue of materials
Hydrogen
Gases
1 Citation (Scopus)

TENSION AND BENDING OF A SEMI-ELLIPTICAL SURFACE CRACK.

Isida, M. & Noguchi, H., 1983, Unknown Host Publication Title. Sih, G. C., Ryan, N. E. & Jones, R. (eds.). Martinus Nijhoff Publ, p. 189-192 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cracks
Boundary layers
Stress intensity factors
Boundary conditions

The application of micro laser Doppler velocimeter to hemodialysis

Yoshinaga, K., Nakashima, F., Nogami, H. & Sawada, R., Nov 19 2017, 22nd Microoptics Conference, MOC 2017. Institute of Electrical and Electronics Engineers Inc., p. 232-233 2 p. (22nd Microoptics Conference, MOC 2017; vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser doppler velocimeters
Laser Doppler velocimeters
blood flow
Flow velocity
Blood
42 Citations (Scopus)

The behavior of tip clearance flow at near-stall condition in a transonic axial compressor rotor

Yamada, K., Funazaki, K. & Furukawa, M., Sep 25 2007, Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air. p. 295-306 12 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Vortex flow
Shock waves
Flow fields

The CHF enhancement combining nano-fluid and honeycomb porous plate in a saturated pool boiling

Mori, S., Aznam, S. M. & Okuyama, K., Jan 1 2014, Thermal Hydraulics. American Society of Mechanical Engineers (ASME), (International Conference on Nuclear Engineering, Proceedings, ICONE; vol. 2A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Porous plates
Boiling liquids
Fluids
Nanoparticles
Large scale systems

The cooperative effects of protein and lipid on wear behavior of ultra-high molecular weight polyethylene

Sawae, Y. & Murakami, T., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 663-664 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrahigh molecular weight polyethylenes
Lipids
Wear of materials
Proteins
Lubricants
1 Citation (Scopus)

The decrease of tensile strength for the notched specimens in the hydrogen gas

Itoga, H., Suzuki, Y. & Noguchi, H., Dec 1 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. p. 1304-1311 8 p. (17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tensile strength
Hydrogen
Gases
Crack initiation
Thermal desorption
5 Citations (Scopus)

The development of a new joint mechanism based on human shoulder morphology

Sakai, N., Sawae, Y. & Murakami, T., Dec 22 2006, Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006. p. 982-987 6 p. 1639219. (Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wire
Muscle
Neural networks
Inverse kinematics
Feedback control

The effect of prestrain on fatigue property of precipitation strengthening stainless steel SUH660

Wu, H., Hamada, S. & Noguchi, H., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless steel
Fatigue of materials
Crack propagation
Crack initiation
Precipitates

The effect of the laser beam wavelength and pulse width on micro grooving: Comparison of nanosecond and femtosecond laser

Nonaka, S., Mori, T., Takata, Y. & Kohno, M., Dec 1 2012, ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012. p. 275-280 6 p. (ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrashort pulses
Laser beams
Laser pulses
Machining
Wavelength
3 Citations (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 735-743 9 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Compressors
Vortex flow
Flow rate
Flow structure

The effect of working parameters upon the electrical permittivity of grease lubricants in EHD contacts

Nagata, Y., Sugimura, J. & Glovnea, R., 2009, World Tribology Congress 2009 - Proceedings. p. 742 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrohydrodynamics
Lubricating greases
Lubricants
Permittivity
Oils

The effects of grain size and pore size on the high cycle fatigue behavior of injection molded Ti-6Al-4V compacts

Kudo, K., Shinagawa, K. & Miura, H., Jan 1 2018, Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018. Metal Powder Industries Federation, p. 243-252 10 p. (Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pore size
grain size
Fatigue of materials
injection
porosity
7 Citations (Scopus)

The effects of strong oxidizing slurry and processing atmosphere on double-sided CMP of SiC wafer

Yin, T., Doi, T., Kurokawa, S., Ohnishi, O., Yamazaki, T., Wang, Z. & Tan, Z., Dec 19 2012, Manufacturing Engineering and Automation II. p. 1131-1134 4 p. (Advanced Materials Research; vol. 591-593).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Processing
Oxidants
Atmospheric pressure
Air
Experiments
21 Citations (Scopus)

The influence of water vapor and SO2 on the durability of solid oxide fuel cells

Liu, R. R., Kim, S. H., Shiratori, Y., Oshima, T., Ito, K. & Sasaki, K., Dec 1 2009, ECS Transactions - Solid Oxide Fuel Cells 11 (SOFC-XI). 2 PART 3 ed. p. 2859-2866 8 p. (ECS Transactions; vol. 25, no. 2 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Water vapor
Durability
Cathodes
Air
1 Citation (Scopus)

The influences of a hydrogen environment on the tribological properties of pure metals

Fukuda, K. & Sugimura, J., 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 3. p. 2728 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen
Metals
1 Citation (Scopus)

The Motion Change of Forearm Pronation/Supination with Vibration Stimulation for Upper-Limb Perception-Assist

Honda, K. & Kiguchi, K., Aug 8 2018, 2018 World Automation Congress, WAC 2018. IEEE Computer Society, p. 289-293 5 p. 8430453. (World Automation Congress Proceedings; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Muscle
Experiments

Theoretical study of a flexible wiretype Joule Thomson micro-refrigerator for use in cryosurgery

Widyaparaga, A., Kuwamoto, M., Sakoda, N., Kohno, M. & Takata, Y., Dec 1 2010, ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010. PARTS A AND B ed. p. 591-598 8 p. (ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010; no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cryosurgery
Refrigerators
Polyether ether ketones
Gases
Heat transfer

Theoretical study of inorganic carbonaceous species reaction with the surfaces of BaTiO3(001)

Rivera, D. S., Ishimoto, T., Quang-Tuyen, T., Shiratori, Y. & Koyama, M., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Singhal, S. C. & Eguchi, K. (eds.). 1 ed. Electrochemical Society Inc., p. 3177-3185 9 p. (ECS Transactions; vol. 68, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon
Chemisorption
Solid oxide fuel cells (SOFC)
Density functional theory
Adsorption

The potential of touch technology

Mochiyama, H., Sano, A., Takesue, N., Kikuuwe, R. & Fujimoto, H., Dec 1 2005, 2005 IEEE Workshop on Advanced Robotics and its Social Impacts. p. 210-213 4 p. 1511653. (2005 IEEE Workshop on Advanced Robotics and its Social Impacts; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Display devices
Textures
Inspection
Wire
Sensors
9 Citations (Scopus)

Thermal analysis of a microtubular solid oxide fuel cell using electrochemical impedance spectroscopy

Nakajima, H., Konomi, T. & Kitahara, T., Dec 1 2009, ECS Transactions - Solid Oxide Fuel Cells 11 (SOFC-XI). 2 PART 1 ed. p. 359-368 10 p. (ECS Transactions; vol. 25, no. 2 PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Electrochemical impedance spectroscopy
Thermoanalysis
Anodes
Cathodes

Thermal analysis on filling process in hydrogen tank

Koshimizu, T., Takata, Y., Kasao, D. & Monde, M., Dec 1 2005, Proceedings of the ASME Heat Transfer Division 2005. 1 ed. p. 141-148 8 p. (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; vol. 376 HTD, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermoanalysis
Hydrogen
Gases
Temperature
Numerical analysis
2 Citations (Scopus)

Thermal and dissolved gas effects on cavitation in a 2-D convergent-divergent nozzle flow

Watanabe, S., Enomoto, K., Yamamoto, Y. & Hara, Y., Jan 1 2014, Fora: Cavitation and Multiphase Flow; Fluid Measurements and Instrumentation; Microfluidics; Multiphase Flows: Work in Progress; Fluid-Particle Interactions in Turbulence. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Nozzles
Thermal effects
Gases
Ethers

Thermal conductivity measurement of hydrogen at high pressure and high temperature

Kimura, K., Moroe, S., Woodfield, P., Fukai, J., Shinzato, K., Kohno, M., Fujii, M. & Takata, Y., Dec 1 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermal conductivity
Hydrogen
Thermal diffusivity
Wire
Temperature

Thermal conductivity of ultrananocrystalline diamond/hydrogenated amorphous carbon composite films prepared by coaxial arc plasma deposition

Takeichi, S., Nishiyama, T., Tabara, M., Kawawaki, S., Kohno, M., Takahashi, K. & Yoshitake, T., Jan 1 2016, Carbon Nanostructures: From Fundamental Studies to Applications and Devices. Weisman, R. B., Atanassov, P. B., Imahori, H. & Rotkin, S. V. (eds.). 25 ed. Electrochemical Society Inc., p. 27-32 6 p. (ECS Transactions; vol. 75, no. 25).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plasma deposition
Carbon films
Amorphous carbon
Composite films
Diamonds
3 Citations (Scopus)

Thermodynamic parameter on cavitation in space inducer

Yoshida, Y., Kikuta, K., Niiyama, K. & Watanabe, S., Dec 1 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th Int. Conference on Nanochannels, Microchannels, and M, FEDSM 2. p. 203-213 11 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Liquids
Cryogenic liquids
Latent heat

The role of meridional geometry in aerodynamic design of centrifugal compressor

Ito, S., Furukawa, M., Yamada, K., Manabe, K., Oka, N., Tomita, I. & Hayashi, Y., Jan 1 2018, Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Aerodynamics
Viscous flow
Geometry
Compressors
2 Citations (Scopus)

The role of subchondral tissues on lubrication properties of natural articular cartilage

Yarimitsu, S., Nakashima, K., Sawae, Y. & Murakami, T., Oct 22 2010, 6th World Congress of Biomechanics, WCB 2010 - In Conjunction with 14th International Conference on Biomedical Engineering, ICBME and 5th Asia Pacific Conference on Biomechanics, APBiomech. p. 911-914 4 p. (IFMBE Proceedings; vol. 31 IFMBE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cartilage
Lubrication
Tissue
Hydration
Fluids
7 Citations (Scopus)

The role of tip leakage vortex breakdown in compressor rotor aerodynamics

Furukawa, M., Inoue, M., Saiki, K. & Yamada, K., Jan 1 1998, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Aerodynamics
Vortex flow
Rotors
Vorticity
8 Citations (Scopus)

The role of tip leakage vortex breakdown in flow fields and aerodynamic characteristics of transonic centrifugal compressor impellers

Yamada, K., Furukawa, M., Fukushima, H., Ibaraki, S. & Tomita, I., Dec 1 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011. PARTS A, B, AND C ed. p. 2111-2123 13 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Impellers
Centrifugal compressors
Flow fields
Aerodynamics
Vortex flow
3 Citations (Scopus)

The study of droplet array combustion on TEXUS-46-preliminary scientific results of the Nitrogen Oxide production

Moesl, K. G., Sattelmayer, T., Eigenbrod, C., Kikuchi, M., Yamamoto, S., Yoda, S., Mikami, M., Nomura, H., Moriue, O., Umemura, A., Hisashi, Y. & Sugano, N., Dec 1 2011, Proceedings of the 20th ESA Symposium on European Rocket and Balloon Programmes and Related Research. p. 487-492 6 p. (European Space Agency, (Special Publication) ESA SP; vol. 700 SP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

nitrogen oxides
Nitrogen oxides
droplet
combustion
prevaporization

Three-dimensional characterization of fatigue crack propagation behavior in an aluminum alloy using high resolution X-Ray microtomography

Zhang, H., Qu, P. C., Sakaguchi, Y., Toda, H., Kobayashi, M., Uesugi, K. & Suzuki, Y., Dec 1 2008, Materials Science and Technology Conference and Exhibition MS and T'08. p. 1107-1116 10 p. (Materials Science and Technology Conference and Exhibition, MS and T'08; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Aluminum alloys
Cracks
X rays
Crack propagation
3 Citations (Scopus)

Three dimensional heat transmission simulation of supercritical pressure fluid

Kitou, K., Chaki, M., Ishii, Y., Matsuura, M., Shioiri, A., Mori, H. & Yoshida, S., 2005, Proceedings of the American Nuclear Society - International Congress on Advances in Nuclear Power Plants 2005, ICAPP'05. Vol. 4. p. 2255-2264 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluids
Turbulence models
Hot Temperature
Water
1 Citation (Scopus)

Three-dimensional integration of optical multi-chips using surface-activated bonding for high-density microsystems packaging

Higurashi, E., Chino, D., Suga, T. & Sawada, R., Oct 23 2008, 2008 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OPT MEMS. p. 62-63 2 p. 4607829. (2008 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OPT MEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microsystems
Packaging
Microlenses
Laser Doppler velocimeters
Glass
1 Citation (Scopus)

Three-dimensional structure of separated and vortical flow inahalf-ducted propeller fan

Jeong, J. H., Takahashi, K., Iwakiri, K. & Furukawa, M., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 1005-1010 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

shrouded propellers
propeller fans
separated flow
Propellers
Fans
1 Citation (Scopus)

Three-dimensional zinc mapping inside aluminum foams using synchrotron X-ray microtomography

Ohgaki, T., Takami, Y., Toda, H., Kobayashi, T., Suzuki, Y., Uesugi, K., Makii, K., Takagi, T. & Aruga, Y., Dec 1 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 3 ed. p. 1677-1680 4 p. (Materials Science Forum; vol. 561-565, no. PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
Synchrotrons
foams
Foams
Zinc
1 Citation (Scopus)

Threshold of shear-mode fatigue crack growth in bearing steel

Matsunaga, H., Muramoto, S. & Endo, M., Dec 1 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. p. 993-999 7 p. (17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Fatigue crack propagation
Cracks
Steel
Polishing
10 Citations (Scopus)

Time-optimal motion planning of skid-steer mobile robots in the presence of obstacles

Yamamoto, M., Iwamura, M. & Mohri, A., 1998, Innovations in Theory, Practice and Applications. Anon (ed.). IEEE, Vol. 1. p. 32-37 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Collision avoidance
Motion planning
Splines
Mobile robots
Actuators
1 Citation (Scopus)

Ti-porous-sheet-supported Pt electrocatalysts for PEFCs

Kawachino, D., Noda, Z., Matsuda, J., Hayashi, A. & Sasaki, K., Jan 1 2017, ECS Transactions. Shirvanian, P. A., Ramani, V., Kim, Y-T., Gasteiger, H. A., Shinohara, K., Ayers, K. E., Pivovar, B. S., Jones, D. J., Uchida, H., Perry, K. A., Mitsushima, S., Xu, H., Schmidt, T. J., Fenton, J. M., Fuller, T. F., Strasser, P., Buechi, F., Swider-Lyons, K. E., Mantz, R. A., Narayan, S., Pintauro, P. N., Coutanceau, C. & Weber, A. Z. (eds.). 8 ed. Electrochemical Society Inc., p. 781-787 7 p. (ECS Transactions; vol. 80, no. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Fuel cells
Diffusion in gases
Electrolytes
Catalyst supports
4 Citations (Scopus)

Torque optimization for a 7DOF upper-limb power-assist exoskeleton robot

Hayashi, Y., Dubey, R. & Kiguchi, K., Aug 12 2011, IEEE SSCI 2011: Symposium Series on Computational Intelligence - RIISS 2011: 2011 IEEE Workshop on Robotic Intelligence in Informationally Structured Space. p. 49-54 6 p. 5945786. (IEEE SSCI 2011: Symposium Series on Computational Intelligence - RIISS 2011: 2011 IEEE Workshop on Robotic Intelligence in Informationally Structured Space).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torque
Robots
End effectors
Redundancy
Exoskeleton (Robotics)

Total Angle Resolved Scattering Characterization for Ultra-fine Finished Surface Areal-Topography

Takaya, Y., Michihata, M. & Hayashi, T., Jan 1 2014, 2014 International Symposium on Optomechatronic Technologies, ISOT 2014. Institute of Electrical and Electronics Engineers Inc., p. 200-204 5 p. 7119419

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface topography
Scattering
Light scattering
Platinum
Lenses