Department of Mechanical Engineering

Research Output 1978 2020

Filter
Conference contribution
Conference contribution
6 Citations (Scopus)

Combined device of optical microdisplacement sensor and PZT-actuated micromirror

Akase, K., Sawada, R., Higurashi, E., Kobayashi, T., Maeda, R., Inokuchi, M., Sanada, S. & Ishikawa, I., Dec 1 2007, 2007 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OMENS. p. 199-200 2 p. 4373909. (2007 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OMENS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical sensors
Mirrors
Microsensors
Surface emitting lasers
Hinges

COMBUSTION ENHANCEMENT OF LEAN MIXTURES BY PLASMA JET IGNITION.

Ono, S., Murase, E., Hanada, K. & Shimizu, R., Jan 1 1987, Unknown Host Publication Title. ASME, Vol. 4. p. 245-252 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plasma jets
Ignition
Ignition systems
Orifices
Plasmas

Combustion properties of hydrogen/air mixture with and without dilution

Nagano, Y., Takeo, T., Tomari, K., Hayakawa, A., Kobayashi, S. & Kitagawa, T., Dec 1 2011, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dilution
Hydrogen
Air
1 Citation (Scopus)

Compact rumen pH sensor: Aiming at the realization of livestock electronic management and fine forage strategy

Zhang, L., Lu, J., Nogami, H., Okada, H. & Itoh, T., Jun 5 2017, 2017 International Conference on Electronics Packaging, ICEP 2017. Institute of Electrical and Electronics Engineers Inc., p. 602-604 3 p. 7939459. (2017 International Conference on Electronics Packaging, ICEP 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

pH sensors
Agriculture
Electric power utilization
Monitoring
9 Citations (Scopus)

Comparative studies on short and long length-scale stall cell propagating in an axial compressor rotor

Inoue, M., Kuroumaru, M., Tanino, T., Yoshida, S. & Furukawa, M., Jan 1 2000, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Pressure distribution
Vortex flow
Pressure transducers
11 Citations (Scopus)

Comparative study on tip clearance flow fields in two types of transonic centrifugal compressor impeller with splitter blades

Yamada, K., Tamagawa, Y., Fukushima, H., Furukawa, M., Ibaraki, S. & Iwakiri, K. I., Dec 1 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. PARTS A, B, AND C ed. p. 2053-2063 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Turbomachine blades
Compressors
Flow fields
Vortex flow
7 Citations (Scopus)

Compensation of the effects of muscle fatigue on EMG-based control using fuzzy rules based scheme

Lalitharatne, T. D., Hayashi, Y., Teramoto, K. & Kiguchi, K., Oct 31 2013, 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2013. p. 6949-6952 4 p. 6611156. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromyography
Muscle Fatigue
Fuzzy rules
Muscle
Fatigue of materials

Complete coverage motion control using gradually building map

Iwamoto, N. & Yamamoto, M., Jan 1 2014, 2014 13th International Conference on Control Automation Robotics and Vision, ICARCV 2014. Institute of Electrical and Electronics Engineers Inc., p. 1917-1922 6 p. 7064609. (2014 13th International Conference on Control Automation Robotics and Vision, ICARCV 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion control
Robots
3 Citations (Scopus)

Compliant four degree-of-freedom manipulator with locally deformable elastic elements for minimally invasive surgery

Arata, J., Fujisawa, Y., Nakadate, R., Kiguchi, K., Harada, K., Mitsuishi, M. & Hashizume, M., May 1 2019, 2019 International Conference on Robotics and Automation, ICRA 2019. Institute of Electrical and Electronics Engineers Inc., p. 2663-2669 7 p. 8793798. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2019-May).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surgery
Manipulators
Robotics
Needles
Finite element method

Comprehensive representation of pitch deviations suitable for engagement evaluation in different types of gears

Kurokawa, S., Ariura, Y. & Doi, T., 2010, 10th International Symposium on Measurement and Quality Control 2010, ISMQC 2010. p. 71-74 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Helical gears
Bevel gears
Spur gears
Gear teeth
1 Citation (Scopus)

Conceptual design of a versatile robot for minimally invasive transnasal microsurgery

Marinho, M. M., Nakazawa, A., Nakanishi, J., Ueyama, T., Hasegawa, Y., Arata, J., Mitsuishi, M. & Harada, K., Jan 18 2017, 2016 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2016. Institute of Electrical and Electronics Engineers Inc., 7824180. (2016 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microsurgery
Pituitary Neoplasms
Robotics
Conceptual design
robotics

Condensation of downward-flowing R407C in a staggered bundle of horizontal low-finned tubes

Honda, H., Takamatsu, H., Takata, N. & Tawaraya, M., Dec 1 1999, Proceedings of the 1st International Conference on Engineering Thermophysics (ICET '99). Tien, C-L., Cai, R., Xu, J., Tien, C-L., Cai, R. & Xu, J. (eds.). p. 404-411 8 p. (Proceedings of the 1st International Conference on Engineering Thermophysics (ICET '99)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer coefficients
Condensation
Mass transfer
Vapors
Momentum transfer

Condensation of downward-flowing zeotropic mixture HCFC-123/HFC-134a on a staggered bundle of horizontal finned tubes

Takamatsu, H., Honda, H. & Takata, N., Jun 1997, 2nd International Sympodium on Heat Transfer Enhancement and Energy Conservation. p. 30-36 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condensation of HFC-134a HCFC-123 in a staggered bundle of horizontal finned tubes

Takamatsu, H., Honda, H., Takata, N. & Yamasaki, T., Oct 1995, Eurotherm Seminar 47 : Heat Transfer in Condensation. p. 110-115 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condensation of zeotropic mixture HCFC-123/HFC-134a on a staggered bundle of horizontal finned tubes

Takamatsu, H., Honda, H. & Takata, N., Nov 1997, SAREK '97 Annual Winter Conference. p. 53-60 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Contact pressure measurement device with a laser micro-displacement sensor

Hayashida, Y., Harisaki, K., Takeshita, T., Morita, N., Ando, H., Higurashi, E., Nogami, H. & Sawada, R., Oct 2 2015, OMN 2015 Jerusalem - 2015 International Conference on Optical MEMS and Nanophotonics, Proceedings. IEEE Computer Society, Vol. 02-05-August-2015. 7288842

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pressure measurement
Contact sensors
Lasers
Sensors
Optical sensors
1 Citation (Scopus)

Continuous Wrist Joint Control Using Muscle Deformation Measured on Forearm Skin

Kato, A., Hirabayashi, M., Matsurnoto, Y., Nakashima, Y., Kobayashi, Y., Fujie, M. G. & Sugano, S., Sep 10 2018, 2018 IEEE International Conference on Robotics and Automation, ICRA 2018. Institute of Electrical and Electronics Engineers Inc., p. 1818-1824 7 p. 8460491. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Muscle
Skin
Joint prostheses
Prosthetics
5 Citations (Scopus)

Controlled-endwall-flow blading for multistage axial compressor rotor

Inoue, M., Kuroumaru, M., Furukawa, M., Kinoue, Y., Tanino, T., Maeda, S. & Okuno, K., Jan 1 1997, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Turbomachine blades
Cascades (fluid mechanics)
Boundary layer flow
3 Citations (Scopus)

Controlling multi-link manipulators by fuzzy selection of dynamic models

Nanayakkara, T., Watanabe, K., Kiguchi, K. & Izumi, K., Jan 1 2000, IECON Proceedings (Industrial Electronics Conference). IEEE Computer Society, p. 638-643 6 p. 973224. (IECON Proceedings (Industrial Electronics Conference); vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manipulators
Dynamic models
Neural networks
Evolutionary algorithms
Torque
1 Citation (Scopus)

Control of foot trajectry in perception-assist with a power-assist robot

Kiguchi, K., Yokomine, Y., Okada, N. & Hayashi, Y., Jan 1 2013, Proceedings - 2013 2nd International Conference on Robot, Vision and Signal Processing, RVSP 2013. IEEE Computer Society, p. 224-228 5 p. 6830018. (Proceedings - 2013 2nd International Conference on Robot, Vision and Signal Processing, RVSP 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Experiments

Control the deformation of MIM parts by the powder size distribution

Osada, T., Kudo, K., Hashikawa, R., Tsumori, F. & Miura, H., Jan 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Powders
6 Citations (Scopus)

Cooperative investigations on degradation of cathode materials in segment-in-series cells by MHI

Yokokawa, H., Kishimoto, H., Yamaji, K., Horita, T., Watanabe, T., Yamamoto, T., Eguchi, K., Matsui, T., Sasaki, K., Shiratori, Y., Kawada, T., Sato, K., Hashida, T., Unemoto, A., Kabata, T. & Tomida, K., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 3 PART 3 ed. p. 2191-2200 10 p. (ECS Transactions; vol. 35, no. 3 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cathodes
Degradation
Microstructure
Electron probe microanalysis
Phase boundaries

Cooperative motion planning for grasp-work type manipulators

Hirano, G., Yamamoto, M. & Mohri, A., Jan 1 1998, Proceedings - 1998 IEEE International Conference on Robotics and Automation, ICRA 1998. Institute of Electrical and Electronics Engineers Inc., p. 940-945 6 p. 677206. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion planning
Manipulators
Point contacts
Trajectories
Friction

Coupled analysis of two-dimensional acoustic and membrane vibration by concentrated mass model

Ishikawa, S., Kijimoto, S., Ataru, M. & Yuta, A., Jan 1 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sound waves
Vibrations (mechanical)
Acoustics
membranes
Membranes
2 Citations (Scopus)

Coupled analysis of two-dimensional acoustic and membrane vibration by concentrated mass model

Ishikawa, S., Kijimoto, S., Owaki, R. & Matsuo, A., Jan 1 2014, INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control. Davy, J., Burgess, M., Don, C., Dowsett, L., McMinn, T. & Broner, N. (eds.). Australian Acoustical Society, (INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sound waves
membranes
vibration
stiffness matrix
acoustics
1 Citation (Scopus)

Critical heat flux enhancement in water-based nanofluid with honeycomb porous plate on large heated surface

Mt Aznam, S., Mori, S. & Okuyama, K., Jan 1 2016, Student Paper Competition. American Society of Mechanical Engineers (ASME), V005T15A036. (International Conference on Nuclear Engineering, Proceedings, ICONE; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Porous plates
Heat flux
Boiling liquids
Water
Metals
4 Citations (Scopus)

Current distribution analysis of a microtubular solid oxide fuel cell with surface temperature measurements

Nakajima, H. & Kitahara, T., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 2 PART 2 ed. p. 1087-1096 10 p. (ECS Transactions; vol. 35, no. 2 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface measurement
Solid oxide fuel cells (SOFC)
Temperature measurement
Anodes
Cathodes

Damage behavior of micro segregation in Al-Si alloy by use of phase contrast imaging

Yamada, R., Toda, H., Besel, Y., Uesugi, K. & Akihisa, T., Jan 1 2016, 72nd World Foundry Congress, WFC 2016. The WFO (The World Foundry Organization Ltd), p. 379-380 2 p. (72nd World Foundry Congress, WFC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Imaging techniques
Tomography
X rays
Processing
Synchrotrons

Decision method of internal force for sensorless positioning of musculoskeletal system

Kino, H., Kikuchi, S. & Tahara, K., 2010, Proceedings - 2010 International Conference on Broadband, Wireless Computing Communication and Applications, BWCCA 2010. p. 731-736 6 p. 5633612

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Musculoskeletal system
Sensory feedback
Redundancy
Muscle
1 Citation (Scopus)

Defective nitrogen-doped graphene foam: Clarifying the role of nitrogen in non-precious ORR catalysts

Liu, J., Daio, T., Sasaki, K. & Lyth, S. M., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Shinohara, K., Narayanan, S. R., Swider-Lyons, K., Weber, A., Coutanceau, C., Mantz, R., Gasteiger, H. A., Jones, D., Edmundson, M., Mitsushima, S., Ramani, V., Meas, Y., Fuller, T., Uchida, H., Buchi, F. N., Perry, K. A., Schmidt, T. J., Fenton, J. M. & Strasser, P. (eds.). 3 ed. Electrochemical Society Inc., p. 271-280 10 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Graphene
Foams
Nitrogen
Catalysts
3 Citations (Scopus)

Defective nitrogen-doped graphene foam: A non-precious electrocatalyst for the oxygen reduction reaction in alkaline medium

Liu, J., Sasaki, K. & Lyth, S. M., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Shinohara, K., Narayanan, S. R., Swider-Lyons, K., Weber, A., Coutanceau, C., Mantz, R., Gasteiger, H. A., Jones, D., Edmundson, M., Mitsushima, S., Ramani, V., Meas, Y., Fuller, T., Uchida, H., Buchi, F. N., Perry, K. A., Schmidt, T. J., Fenton, J. M. & Strasser, P. (eds.). 3 ed. Electrochemical Society Inc., p. 1161-1172 12 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Graphene
Foams
Nitrogen
Oxygen

Defects formation in LaNi5 and its related alloys with hydrogenation and dehydrogenation

Akiba, E., Sakaki, K. & Nakamura, Y., May 22 2006, Advanced Materials for Energy Conversion III - A Symposium in Honor of Drs. Gary Sandrock, Louis Schlapbach and Seijirau Suda for Lifetime Achievements in Metal Hydride Research and Development. Vol. 2006. 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dehydrogenation
dehydrogenation
Hydrogenation
hydrogenation
Defects
1 Citation (Scopus)

Deformation microstructures in a two-phase stainless steel during large strain deformation

Tsuzaki, K., Belyakov, A. & Kimura, Y., Dec 1 2006, Nanomaterials by Severe Plastic Deformation, NanoSPD3 - Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastics Deformation. p. 305-310 6 p. (Materials Science Forum; vol. 503-504).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
stainless steels
Stainless steel
swaging
microstructure
2 Citations (Scopus)

Degradation of SOFCs by various impurities: Impedance spectroscopy and microstructural analysis

Kikuchi, Y., Matsuda, J., Tachikawa, Y., Shiratori, Y., Taniguchi, S. & Sasaki, K., May 30 2017, ECS Transactions. Kawada, T. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 1253-1260 8 p. (ECS Transactions; vol. 78, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Spectroscopy
Impurities
Degradation
Coal gas
1 Citation (Scopus)

Density gradient materials by direct metal laser sintering

Kang, H. G., Osada, T. & Miura, H., 2010, THERMEC 2009 Supplement. Vol. 89-91. p. 281-284 4 p. (Advanced Materials Research; vol. 89-91).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sintering
Lasers
Porosity
Metals
Powder metals

Dependence of gas transportation in radial lip seals on oil and gas

Sugimura, J., Gondo, S. & Yamamoto, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - WTC 2005. (Proceedings of the World Tribology Congress III - WTC 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seals
Gases
Mineral oils
Flow rate
Viscosity

Dependence of gas transportation in radial lip seals on oil and gas

Sugimura, J., Gondo, S. & Yamamoto, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 265-266 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seals
Gases
Flow rate
Viscosity
Mineral oils
3 Citations (Scopus)

Design and fabrication of driving microcoil with large tilt-angle for medical scanner application

Sun, B., Sawada, R., Yang, Z., Zhang, Y., Itoh, T. & Maeda, R., Mar 9 2014, DTIP 2014 - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. Institute of Electrical and Electronics Engineers Inc., 7056688. (DTIP 2014 - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical fibers
Scanning
Fabrication
Endoscopy
Wet etching
2 Citations (Scopus)

Designing cathode layers for PEFC with the low platinum-loading

Uda, K., Noda, Z., Nagayama, M., Sasaki, K. & Hayashi, A., Jan 1 2018, ECS Transactions. Coutanceau, C., Narayan, S., Kim, Y-T., Gochi-Ponce, Y., Pivovar, B. S., Fuller, T. F., Mantz, R. A., Shirvanian, P., Jones, D. J., Buechi, F., Ramani, V. K., Fenton, J. M., Swider-Lyons, K. E., Schmidt, T. J., Ayers, K. E., Weber, A. Z., Pintauro, P. N., Strasser, P., Xu, H., Mitsushima, S., Gasteiger, H. & Uchida, H. (eds.). 13 ed. Electrochemical Society Inc., p. 497-506 10 p. (ECS Transactions; vol. 86, no. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Platinum
Cathodes
Carbon
Chemical activation
Costs
2 Citations (Scopus)

Design of 3D printer-like data interface for a robotic removable machining

Nagata, F., Yoshimoto, S., Kiguchi, K., Watanabe, K. & Habib, M. K., Jan 1 2016, Intelligent Robotics and Applications - 9th International Conference, ICIRA 2016, Proceedings. Liu, H., Kubota, N., Obo, T. & Kiguchi, K. (eds.). Springer Verlag, p. 40-50 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9834 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Machining
Robotics
Computer aided manufacturing
Robots
1 Citation (Scopus)

Design of a flexible spoke wheel for a mobile robot of wiring task inside ceiling

Yamamoto, M., Ikeda, T. & Gao, P., 2010, 2010 World Automation Congress, WAC 2010. 5665647

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ceilings
Electric wiring
Mobile robots
Wheels
Bolts
4 Citations (Scopus)

Design of a propeller fan using 3-D Inverse Design Method and CFD for high efficiency and low aerodynamic noise

Okamoto, H., Goto, A. & Furukawa, M., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. p. 165-171 7 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellers
Fans
Aerodynamics
Computational fluid dynamics
Vortex flow
11 Citations (Scopus)

Design of complementary filter for high-fidelity attitude estimation based on sensor dynamics compensation with decoupled properties

Masuya, K., Sugihara, T. & Yamamoto, M., Jan 1 2012, 2012 IEEE International Conference on Robotics and Automation, ICRA 2012. Institute of Electrical and Electronics Engineers Inc., p. 606-611 6 p. 6224832. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sensors
Transfer functions
High pass filters
Gyroscopes
Bandpass filters
5 Citations (Scopus)

Detached eddy simulation of unsteady flow field and prediction of aerodynamic sound in a half-ducted propeller fan

Kusano, K., Jeong, J. H., Yamada, K. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 713-722 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellers
Unsteady flow
Fans
Flow fields
Aerodynamics
2 Citations (Scopus)

Detailed studies on separated boundary layers over low-pressure turbine airfoils under several high lift conditions: Effect of freesteam turbulence

Funazaki, K. I., Yamada, K., Tanaka, N. & Chiba, Y., Dec 1 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. p. 1013-1027 15 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Airfoils
Boundary layers
Turbulence
Turbines
Cascades (fluid mechanics)

Detection of inner abnormality by the frequency modulation of ultrasonic wave

Nakano, T., Inoue, T., Sugiyama, T. & Yamanaka, S., Sep 10 2010, COMADEM 2010 - Advances in Maintenance and Condition Diagnosis Technologies Towards Sustainable Society, Proc. 23rd Int. Congr. Condition Monitoring and Diagnostic Engineering Management. p. 281-287 7 p. (COMADEM 2010 - Advances in Maintenance and Condition Diagnosis Technologies Towards Sustainable Society, Proc. 23rd Int. Congr. Condition Monitoring and Diagnostic Engineering Management).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic waves
Frequency modulation
abnormality
Ultrasonics
Inspection

Determination of effective stress intensity factor range of mode ii fatigue crack propagation using improved experimental method

Liu, M. & Hamada, S., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Stress intensity factors
Bearings (structural)
Fatigue of materials
Jigs

Determination of α / γ phase boundaries in the Fe-Cr-Ni-Mn quaternary system with a diffusion-multiple method

Shuro, I., Kobayashi, S., Nakamura, T. & Tsuzaki, K., Jan 1 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 577-582 6 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase boundaries
Chromium
Manganese
Nickel
Chemical analysis
2 Citations (Scopus)

Development and evaluation of ir based anode electrocatalysts for water electrolysis

Muto, M., Nagayama, M., Sasaki, K. & Hayashi, A., Jan 1 2018, ECS Transactions. Coutanceau, C., Narayan, S., Kim, Y-T., Gochi-Ponce, Y., Pivovar, B. S., Fuller, T. F., Mantz, R. A., Shirvanian, P., Jones, D. J., Buechi, F., Ramani, V. K., Fenton, J. M., Swider-Lyons, K. E., Schmidt, T. J., Ayers, K. E., Weber, A. Z., Pintauro, P. N., Strasser, P., Xu, H., Mitsushima, S., Gasteiger, H. & Uchida, H. (eds.). 13 ed. Electrochemical Society Inc., p. 719-726 8 p. (ECS Transactions; vol. 86, no. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Electrolysis
Anodes
Durability
Degradation
2 Citations (Scopus)

Development and use of a micro optical blood flow sensor based on system in package (SiP) technology that fuses optical MEMS and integrated circuit to detect avian influenza

Seto, R., Sawada, R., Higurashi, E., Itoh, T., Suzuki, K., Tsukamoto, K., Ikehara, T., Maeda, R., Masuda, T. & Fujitsu, T., Dec 1 2007, TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems. p. 1955-1958 4 p. 4300543. (TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MOEMS
Electric fuses
Integrated circuits
Blood
Sensors