Department of Mechanical Engineering

Research Output 1978 2020

Filter
Conference contribution
Conference contribution
3 Citations (Scopus)

Durability assessment of SOFC stacks with several types of structures for thermal cycles during their lifetimes on residential use

Hatae, T., Sato, K., Somekawa, T., Matsuzaki, Y., Amaha, S., Yoshikawa, M., Mugikura, Y., Miyara, K., Oshima, T., Taniguchi, S., Sasaki, K., Shimazu, M., Takahashi, Y., Kawakami, A., Mori, N. & Yokokawa, H., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 2209-2216 8 p. (ECS Transactions; vol. 68, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Durability
Degradation
Hot Temperature
8 Citations (Scopus)

Dynamic force/torque equilibrium for stable grasping by a triple robotic fingers system

Tahara, K., Arimoto, S. & Yoshida, M., Dec 11 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2009. p. 2257-2263 7 p. 5354563

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Torque
End effectors
Robots
Computer simulation
11 Citations (Scopus)

Dynamic grasping for an arbitrary polyhedral object by a multi-fingered hand-arm system

Kawamura, A., Tahara, K., Kurazume, R. & Hasegawa, T., Dec 11 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2009. p. 2264-2270 7 p. 5354174

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computer simulation
2 Citations (Scopus)

Dynamic object grasping by a triple-fingered robotic hand

Tahara, K., Arimoto, S. & Yoshida, M., Dec 1 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. p. 2685-2690 6 p. 4650702. (2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Position control
End effectors
Robotics
Computer simulation
6 Citations (Scopus)

Dynamic object manipulation using a multi-fingered hand-arm system: Enhancement of a grasping capability using relative attitude constraints of fingers

Kawamura, A., Tahara, K., Kurazume, R. & Hasegawa, T., Dec 28 2011, IEEE 15th International Conference on Advanced Robotics: New Boundaries for Robotics, ICAR 2011. p. 8-14 7 p. 6088574

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torque
Computer simulation
54 Citations (Scopus)

Dynamic object manipulation using a virtual frame by a triple soft-fingered robotic hand

Tahara, K., Arimoto, S. & Yoshida, M., 2010, 2010 IEEE International Conference on Robotics and Automation, ICRA 2010. p. 4322-4327 6 p. 5509372

Research output: Chapter in Book/Report/Conference proceedingConference contribution

End effectors
Attitude control
Position control
Computer simulation
1 Citation (Scopus)

Dynamic recrystallization mechanisms operating under different processing conditions

Belyakov, A., Dudova, N., Tikhonova, M., Sakai, T., Tsuzaki, K. & Kaibyshev, R., Jan 30 2012, THERMEC 2011. p. 2704-2709 6 p. (Materials Science Forum; vol. 706-709).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic recrystallization
Hot working
grain size
Plastic flow
hot working
3 Citations (Scopus)

EEG-based evaluation for perception-assist in upper-limb power-assist exoskeletons

Lalitharatne, T. D., Teramoto, K., Hayashi, Y., Tamura, K. & Kiguchi, K., Oct 24 2014, World Automation Congress Proceedings. IEEE Computer Society, p. 307-312 6 p. 6935909. (World Automation Congress Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromyography
Electroencephalography
Bioelectric potentials
Brain
Experiments
12 Citations (Scopus)

EEG-controlled meal assistance robot with camera-based automatic mouth position tracking and mouth open detection

Perera, C. J., Lalitharatne, T. D. & Kiguchi, K., Jul 21 2017, ICRA 2017 - IEEE International Conference on Robotics and Automation. Institute of Electrical and Electronics Engineers Inc., p. 1760-1765 6 p. 7989208. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Cameras
Robots
Containers
Flickering
1 Citation (Scopus)

Effect of carbon-neutral fuel fed solid oxide fuel cell system on CO2 emission reduction

Tachikawa, Y., Matsuzaki, Y., Kawabata, Y., Sugahara, M., Somekawa, T., Taniguchi, S. & Sasaki, K., May 30 2017, ECS Transactions. Kawada, T. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 2563-2568 6 p. (ECS Transactions; vol. 78, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Carbon
Protonic ceramic fuel cells (PCFC)
Ceramic materials
Gas emissions

Effect of cell-to-surface interaction on freeze tolerance and osmotic response of cells

Yoshimori, T., Fukagawa, M. & Takamatsu, H., 2009, Proceedings of the ASME Summer Bioengineering Conference, SBC2008. PART A ed. p. 281-282 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Effect of electrode mixing conditions on the performance of lithium-ion batteries analyzed by fast Fourier transform electrochemical impedance spectroscopy

Nakajima, H., Kitahara, T., Higashinaka, Y. & Nagata, Y., Jan 1 2015, Lithium-Ion Batteries. Meng, S., Amine, K. & Wu, J. (eds.). 22 ed. Electrochemical Society Inc., p. 87-95 9 p. (ECS Transactions; vol. 64, no. 22).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrochemical impedance spectroscopy
Fast Fourier transforms
Electrodes
Fillers
Binders

Effect of exchange current density on current distribution at planar-type SOFC anodes

Takino, K., Tachikawa, Y., Shiratori, Y., Taniguchi, S. & Sasaki, K., May 30 2017, ECS Transactions. Kawada, T. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 1523-1531 9 p. (ECS Transactions; vol. 78, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Anodes
Current density
Methane
Computer simulation

Effect of fin geometry on condensation of downward-flowing R123/R134a in a staggered bundle of horizontal low-finned

Takamatsu, H., Honda, H. & Takata, N., Nov 1998, Eurotherm Seminar 62. p. 456-465 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of flow field pattern and microporous layer on gas purge of a polymer electrolyte fuel cell

Nakajima, H., Kitahara, T. & Konomi, T., Dec 1 2010, Polymer Electrolyte Fuel Cells 10, PEFC 10. 1 PART 1 ed. p. 937-944 8 p. (ECS Transactions; vol. 33, no. 1 PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuel cells
Flow fields
Electrolytes
Polymers
Drying
1 Citation (Scopus)

Effect of Frequency in Vibration Stimulation for Human Elbow Extension Motion Change: A Fundamental Study for Upper-Limb Perception-Assist

Kiguchi, K. & Honda, K., Jan 16 2019, Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 391-396 6 p. 8616071. (Proceedings - 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elbow
Vibration
Upper Extremity
Elbow Joint
Experiments
1 Citation (Scopus)

Effect of friction stir welding condition on fatigue limit of welded non-combustible Mg alloy

Hayashi, K., Hamada, S., Shigematsu, I., Sakamoto, M. & Noguchi, H., Jan 1 2012, Advances in Fracture and Damage Mechanics X. p. 311-314 4 p. (Key Engineering Materials; vol. 488-489).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction stir welding
Welding
Fatigue of materials
Defects
Hardness

Effect of gap-junctional cell-to-cell communication on intracellular ice propagation and consequent cell viability

Fukunaga, T., Kubo, H., Kurata, K., Hirahara, H., Wang, H. D. & Takamatsu, H., Jan 1 2015, 24th IIR International Congress of Refrigeration, ICR 2015. International Institute of Refrigeration, p. 4521-4527 7 p. (Refrigeration Science and Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

ice formation
viability
Ice
ice
communication

Effect of gaseous hydrogen on cyclic slip behavior around a stage i fatigue crack tip in an iron alloy

Takahashi, Y., Sakamoto, J., Tanaka, M., Higashida, K. & Noguchi, H., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iron alloys
Crack tips
Helium
Hydrogen
Cracks

Effect of grain size on the fatigue properties of injection moulded Ti-6Al-4V compacts

Kudo, K., Ishimitsu, H., Choe, J., Osada, T., Miura, H. & Shinagawa, K., Jan 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Metal molding
Injection molding
Powders
Boron

Effect of hydrogen gas on the growth of small fatigue crack in JIS-SCM435

Itoga, H., Matsunaga, H. & Matsuoka, S., Jan 1 2014, 11th International Fatigue Congress. Trans Tech Publications, p. 942-947 6 p. (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Cracks
Hydrogen
Gases
Fatigue of materials

Effect of hydrogen on microscopic deformation process near stage II fatigue crack tip

Takahashi, Y., Tanaka, M., Higashida, K. & Noguchi, H., Dec 1 2009, Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials. p. 203-210 8 p. (Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

crack tips
Crack tips
Hydrogen
slip
Cracks
3 Citations (Scopus)

Effect of irreversible electroporation on three-dimensional cell culture model

Kurata, K., Matsushita, M., Yoshii, T., Fukunaga, T. & Takamatsu, H., Dec 14 2012, 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2012. p. 179-182 4 p. 6345900. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroporation
Cell culture
Cell Culture Techniques
Electrodes
Joule heating

Effect of leading edge sweep on cavitation performance of two-bladed flat plate inducer

Igoshi, T., Uchinono, Y., Koroitamana, E., Ishizaka, K., Watanabe, S. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 289-296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Flow rate
Surges (fluid)
Flow measurement
Pressure measurement

Effect of microstructure on the rolling contact fatigue strength of 4600 steel P/M compacts

Tokuoka, T., Nakahara, Y., Kudo, K., Nishioka, T. & Miura, H., Jan 1 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Powders
steels
microstructure
Microstructure

Effect of microstructures on superhydrophobic and slippery lubricant-infused porous surfaces during condensation phase-change

Orejon, D., Maeda, Y., Lv, F., Zhang, P. & Takata, Y., Jan 1 2018, ASME 2018 16th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2018. American Society of Mechanical Engineers (ASME), (ASME 2018 16th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase Change
Condensation
Lubricants
Microstructure
Droplet
2 Citations (Scopus)

Effect of micro-voids on crack initiation and propagation in bending deformation of Al-Mg-Si alloy sheet

Yamamoto, Y., Asano, M., Yoshida, H., Kobayashi, M. & Toda, H., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 325-330 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

crack initiation
crack propagation
Crack initiation
voids
Crack propagation

Effect of nanohole defect on the thermal conductivity of free-standing single-layer graphene

Takamatsu, H., Wang, H., Kurata, K., Fukunaga, T., Takahashi, K. & Xing, Z., Oct 2016, 11th Asian Thermophysical Properties Conference (ATPC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of nesting of fiber bundles on micro fracture of laminated woven fabric composite

Osada, T., Nakai, A. & Hamada, H., Jan 1 2002, Textile Engineering. American Society of Mechanical Engineers (ASME), p. 37-40 4 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fibers
Composite materials
Laminating
Tensile testing
Optical microscopy
1 Citation (Scopus)

Effect of occasional shear loading on fatigue crack growthin 7075 aluminum alloy

Makizaki, M., Matsunaga, H., Yanase, K. & Endo, M., Apr 10 2013, Advanced Materials Science and Technology. p. 264-267 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

aluminum alloys
Aluminum alloys
Crack propagation
cracks
shear
1 Citation (Scopus)

Effect of orientation of small defects on fatigue limit of steels

Lorenzino, P., Okazaki, S., Matsunaga, H. & Murakami, Y., Jan 1 2014, FDMD II - JIP 2014 - Fatigue Design and Material Defects. EDP Sciences, 07001. (MATEC Web of Conferences; vol. 12).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Fatigue of materials
Defects
Cracks
2 Citations (Scopus)

Effect of prestrain on fatigue crack growth of age-hardened Al 6061-T6

Ikematsu, K., Mishima, T., Kang, M., Aono, Y. & Noguchi, H., Jan 1 2009, Fatigue and Fracture Mechanics: 36th Volume. American Society for Testing and Materials, p. 561-573 13 p. (ASTM Special Technical Publication; vol. 1508 STP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Fatigue of materials
Plastic deformation
Fatigue cracks
8 Citations (Scopus)

Effect of processing temperature on microstructure development during ECAP of Al-Mg-Sc alloy

Sitdikov, O., Avtokratova, E., Sakai, T., Tsuzaki, K., Kaibyshev, R. & Watanabe, Y., Jan 1 2008, Materials Science Forum - Nanomaterials by Severe Plastic Deformation 4 - 4th International Conference on Nanomaterials by Severe Plastic Deformation. Estrin, Y., Estrin, Y. & Maier, H. J. (eds.). Trans Tech Publications Ltd, p. 481-486 6 p. (Materials Science Forum; vol. 584-586 PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Equal channel angular pressing
pressing
microstructure
Microstructure
Processing
3 Citations (Scopus)

Effect of protein contained in lubricant for wear properties of pva hydrogel as artificial cartilage

Nakashima, K., Murakami, T. & Sawae, Y., Dec 1 2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cartilage
Hydrogels
Lubricants
Wear of materials
Polyvinyl acetates

Effect of spinning condition on the cooling characteristics and shape of FeSi7.5B15 wures rapidly solidified by the in-rotating-water spinning method

Takamatsu, H., Cho, K. S. & Honda, H., Oct 1996, 3rd KSME/JSME Thermal Engineering Conference. Vol. 2. p. 43-48 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Effect of synovial fluid constituents on tribological performance of artificial hydrogel cartilage material

Yarimitsu, S., Nakashima, K., Sawae, Y. & Murakami, T., 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 3. p. 2279-2282 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogel
Cartilage
Hydrogels
Fluids
4 Citations (Scopus)

Effect of test frequency on hydrogen-enhanced fatigue crack growth in type 304 stainless steel and ductile cast iron

Matsunaga, H., Nakashima, T., Yamada, K., Matsuo, T., Yamabe, J. & Matsuoka, S., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Cast iron
Stainless steel
Hydrogen
Crack tips

Effect of the behavior of generated vapor on the minimum-heat-flux point during rapid quenching of a thin horizontal wire

Takamatsu, H., Honda, H. & Yamashiro, H., Mar 1999, 5th ASME/JSME Thermal Engineering Conference (CD-ROM). p. AJTE99-6366

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of the size of micro-pin-fin on boiling heat transfer from silicon chips immersed in FC-72

Takamatsu, H., Honda, H. & Wei, J. J., Aug 2002, 12th International Heat Transfer Conference. Vol. 4. p. 75-80 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Effect of three-dimensional electric field and heat conduction to electrodes on the temperature rise during irreversible electroporation

Nomura, S., Kurata, K. & Takamatsu, H., Dec 1 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011. (ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat conduction
Electric fields
Tissue
Electrodes
Joule heating

Effect of Vibration Stimulation on a Biarticular Muscle for Elbow Joint Motion Change during Elbow/Shoulder Joint Extension Motion: A Study for the Upper-limb Perception-Assist

Honda, K. & Kiguchi, K., Jan 14 2019, 2018 IEEE International Conference on Cyborg and Bionic Systems, CBS 2018. Institute of Electrical and Electronics Engineers Inc., p. 210-215 6 p. 8612189. (2018 IEEE International Conference on Cyborg and Bionic Systems, CBS 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tendons
Muscle
Vibration
Motion
Insertion
1 Citation (Scopus)

Effect of vitamin C on mechanical property of the regenerated-cartilage tissue

Omata, S., Shimizu, T., Sawae, Y. & Murakami, T., Oct 22 2010, 6th World Congress of Biomechanics, WCB 2010 - In Conjunction with 14th International Conference on Biomedical Engineering, ICBME and 5th Asia Pacific Conference on Biomechanics, APBiomech. p. 899-902 4 p. (IFMBE Proceedings; vol. 31 IFMBE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vitamins
Cartilage
Collagen
Ascorbic Acid
Tissue
7 Citations (Scopus)

Effect of wake passing on unsteady aerodynamic performance in a turbine stage

Yamada, K., Hiroma, K., Hirano, Y., Funazaki, K., Tsutsumi, M. & Matsuo, A., Nov 15 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 757-767 11 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aerodynamics
Turbines
Stators
Rotors
Vortex flow

Effect of water temperature on the cooling characteristics and non-crystallinity of FeSi7.5B15 wires rapidly solidified by the in-rotating-water spinning method

Takamatsu, H., Cho, K. S., Honda, H. & Nakahama, H., Mar 1999, 5th ASME/JSME Thermal Engineering Conference. p. AJTE99-6466

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Effect of water vapor and SOx in air on the cathodes of solid oxide fuel cells

Kim, S. H., Ohshima, T., Shiratori, Y., Itoh, K. & Sasaki, K., Sep 29 2008, Proceedings - CIS Workshops 2007, 2007 International Conference on Computational Intelligence and Security Workshops, CISW 2007. p. 131-137 7 p. (Materials Research Society Symposium Proceedings; vol. 1041).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steam
solid oxide fuel cells
Solid oxide fuel cells (SOFC)
Water vapor
water vapor
2 Citations (Scopus)

EFFECTS OF AN INSULATION LAYER ON THE PROPAGATION OF A NORMAL ZONE IN SUPERCONDUCTING WIRES BELOW 4. 2 K.

Funaki, K., Takata, Y., Takeo, M., Irie, F., Ruppert, U., Yang, W. Z., Kristen, E., Lueders, K. & Klipping, G., Dec 1 1986, Proceedings of the International Cryogenic Engineering Conference. Klipping, G. & Klipping, I. (eds.). Engl, p. 730-734 5 p. (Proceedings of the International Cryogenic Engineering Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Insulated wire
Superconducting wire
Insulation
Wire
Numerical analysis
1 Citation (Scopus)

Effects of a soft wearable robotic suit on metabolic cost and gait characteristics in healthy young subjects

Jin, S., Guo, S., Hashimoto, K. & Yamamoto, M., Dec 13 2017, ICCAS 2017 - 2017 17th International Conference on Control, Automation and Systems - Proceedings. IEEE Computer Society, p. 680-684 5 p. (International Conference on Control, Automation and Systems; vol. 2017-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Costs
Oxygen

Effects of bulk transport on surface friction of hydrogels

Yamaguchi, T. & Murakami, T., 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 3. p. 2287-2288 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogels
Friction
2 Citations (Scopus)

Effects of CO2 and N2 dilutions on laminar and turbulent flame propagation

Hayakawa, A., Miki, Y., Kobayashi, S., Nagano, Y. & Kitagawa, T., Dec 1 2011, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dilution
Exhaust gas recirculation
Internal combustion engines

Effects of diluent gases on combustion of coal gasification gas: Comparison between N 2and CO 2 dilutions

Nagano, Y., Kado, K., Takeo, T., Miki, Y. & Kitagawa, T., Dec 1 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011. (ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Coal gasification
Dilution
Gases
Gasification
Temperature