Department of Mechanical Engineering

Research Output 1978 2020

Filter
Conference contribution
Conference contribution
1 Citation (Scopus)

Effects of external and internal hydrogen on tensile properties of austenitic stainless steels containing additive elements

Itoga, H., Matsunaga, H., Yamabe, J. & Matsuoka, S., Jan 1 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Tensile properties
Chemical elements
Hydrogen
Nitrogen
1 Citation (Scopus)

Effects of flow path height of impeller exit and diffuser on flow fields in a transonic centrifugal compressor

Tomita, I., Ibaraki, S., Wakashima, K., Furukawa, M., Yamada, K. & Kanzaki, D., Jan 1 2015, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow fields
Electric inductors
Unsteady flow
Momentum

Effects of gaseous hydrogen on fatigue crack growth behavior of low carbon steel

Lee, D., Nishikawa, H. A., Oda, Y. & Noguchi, H., Jun 14 2010, Proceedings of the ASME Pressure Vessels and Piping Conference 2009. p. 499-507 9 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low carbon steel
Fatigue crack propagation
Hydrogen
Ductile fracture
Gases

Effects of high pressure hydrogen on wear of PTFE and PTFE composite

Sawae, Y., Nakashima, K., Doi, S., Murakami, T. & Sugimura, J., Jun 24 2010, Proceedings of the ASME/STLE International Joint Tribology Conference 2009, IJTC2009. p. 233-235 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

polytetrafluoroethylene
Polytetrafluoroethylene
Polytetrafluoroethylenes
Hydrogen
Wear of materials
1 Citation (Scopus)

Effects of hydrogen and prestrain on tensile properties of low-carbon steel used in hydrogen pipelines

Nishiguchi, H., Fukushima, Y. & Matsuoka, S., Dec 1 2009, Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials. p. 365-372 8 p. (Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

low carbon steels
tensile properties
Low carbon steel
Tensile properties
Pipelines
3 Citations (Scopus)

Effects of hydrogen atmosphere on wear behavior of PTFE sliding against austenitic stainless steel

Sawae, Y., Yamaguti, A., Nakashima, K., Murakami, T. & Sugimura, J., May 16 2008, 2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007. p. 43-45 3 p. (2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007; vol. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

polytetrafluoroethylene
austenitic stainless steels
Polytetrafluoroethylene
Austenitic stainless steel
Polytetrafluoroethylenes
1 Citation (Scopus)

Effects of hydrogen environment on fatigue characteristics of 18Cr-8Ni stainless steel

Kawamoto, K., Aoki, Y., Oda, Y., Yoshimura, T., Noguchi, H. & Higashida, K., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 283-286 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
stainless steels
Hydrogen
Stainless steel
Gases
1 Citation (Scopus)

Effects of internal hydrogen on fatigue strength of commercially pure titanium

Nishikawa, H., Oda, Y. & Noguchi, H., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. p. 1289-1296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium
Hydrogen
Fatigue of materials
Crack initiation
Fatigue strength
2 Citations (Scopus)

Effects of lipids and proteins on wear of prosthetic hip joint materials

Sawae, Y., Murakami, T. & Sawano, T., 2004, Transactions - 7th World Biomaterials Congress. p. 342 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Prosthetics
Lipids
Wear of materials
Proteins
Joint prostheses
5 Citations (Scopus)

Effects of metal counter surfaces on friction and wear of polymeric seal materials in hydrogen

Morita, T., Sato, F., Sawae, Y. & Sugimura, J., Dec 1 2011, BHR Group - 21st International Conference on Fluid Sealing. p. 167-178 12 p. (BHR Group - 21st International Conference on Fluid Sealing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

friction
hydrogen
polymer
metal
sliding
3 Citations (Scopus)

Effects of operating conditions on gas suction of radial lip seals

Nakaoka, S., Sato, Y., Gondo, S., Sugimura, J. & Yamamoto, Y., Dec 1 2005, Papers presented at: Sealing for Pollution Prevention and Control - 18th International Conference of Fluid Sealing. Hoyes, J. (ed.). p. 263-270 8 p. (18th International Conference of Fluid Sealing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seals
Gases
Pumps
Air
Gas chromatography

Effects of stream surface inclination on tip leakage flow fields in compressor rotors

Furukawa, M., Saiki, K., Nagayoshi, K., Kuroumaru, M. & Inoue, M., Jan 1 1997, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Flow fields
Vortex flow
Rotors
Axial flow
25 Citations (Scopus)

Effects of tip clearance on the stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Dec 17 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. GT2013-95479. (Proceedings of the ASME Turbo Expo; vol. 6 C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Vortex flow
Rotors
Flow fields
Tornadoes

Effects of upstream bend on aerodynamic performance of a transonic centrifugal compressor

Yamada, K., Furukawa, M., Arai, H. & Ito, S., Jan 1 2019, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Aerodynamics
Pipe
Compressors
Flow rate
1 Citation (Scopus)

EHL numerical simulation in reciprocating rolling point contact

Izumi, N., Nakashima, M., Watanabe, K., Morita, T. & Sugimura, J., Dec 1 2009, World Tribology Congress 2009 - Proceedings. 1 p. (World Tribology Congress 2009 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Point contacts
Oils
Computer simulation
Film thickness
Reynolds equation

Elastic deformation of surface roughness in thin film hydrodynamic lubrication

Yagi, K. & Sugimura, J., Dec 1 2011, ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. p. 155-157 3 p. (American Society of Mechanical Engineers, Tribology Division, TRIB).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elastic deformation
Lubrication
Hydrodynamics
Surface roughness
Thin films

Electrical and oxidation resistance of surface oxide of porous Fe-Cr-Al alloy for the application of metal supported SOFCs

Pham, H. C., Taniguchi, S., Inoue, Y., Chou, J. T., Izumi, T., Matsuoka, K. & Sasaki, K., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 1715-1720 6 p. (ECS Transactions; vol. 68, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Acoustic impedance
Oxidation resistance
Solid oxide fuel cells (SOFC)
Oxides
Substrates
3 Citations (Scopus)

Electrochemical characterization of MEAs with different Pt-loading for the efficient use of Pt

Uda, K., Noda, Z., Sasaki, K. & Hayashi, A., Jan 1 2017, ECS Transactions. Shirvanian, P. A., Ramani, V., Kim, Y-T., Gasteiger, H. A., Shinohara, K., Ayers, K. E., Pivovar, B. S., Jones, D. J., Uchida, H., Perry, K. A., Mitsushima, S., Xu, H., Schmidt, T. J., Fenton, J. M., Fuller, T. F., Strasser, P., Buechi, F., Swider-Lyons, K. E., Mantz, R. A., Narayan, S., Pintauro, P. N., Coutanceau, C. & Weber, A. Z. (eds.). 8 ed. Electrochemical Society Inc., p. 789-799 11 p. (ECS Transactions; vol. 80, no. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cathodes
Membranes
Electrodes
Fuel cells
Electrolytes

Electrochemical oxygen reduction on nitrogen-containing graphene

Lyth, S. M., Liu, J. & Sasaki, K., Nov 22 2012, 2012 12th IEEE International Conference on Nanotechnology, NANO 2012. 6322162. (Proceedings of the IEEE Conference on Nanotechnology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Graphite
Graphene
graphene
Nitrogen
Oxygen
1 Citation (Scopus)

Electrochemical performance of MEAs with Pt/SnO2 mixed with conductive fillers

Nagamatsu, Y., Kanda, K., Noda, Z., Hayashi, A. & Sasaki, K., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Gasteiger, H. A., Uchida, H., Buchi, F. N., Swider-Lyons, K., Jones, D., Ramani, V., Schmidt, T. J., Weber, A., Fenton, J. M., Meas, Y., Shinohara, K., Edmundson, M., Perry, K. A., Coutanceau, C., Mitsushima, S., Strasser, P., Mantz, R., Fuller, T. & Narayanan, S. R. (eds.). 3 ed. Electrochemical Society Inc., p. 207-213 7 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Catalyst supports
Fillers
Ionomers
Electrocatalysts
Current voltage characteristics
3 Citations (Scopus)

Electrochemical performance of polymer electrolyte fuel cells using carbon-free SnO 2-supported Pt electrocatalysts

Kanda, K., Hayashi, S., Takasaki, F., Noda, Z., Taniguchi, S., Shiratori, Y., Hayashi, A. & Sasaki, K., Dec 1 2011, Polymer Electrolyte Fuel Cells 11. 1 ed. p. 2325-2331 7 p. (ECS Transactions; vol. 41, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Fuel cells
Electrolytes
Carbon
Polymers

Electrochemical properties of NiO-ScSZ anodes prepared from composite precursor containing Ni and Zr

Doumae, K., Usui, T., Yasui, T., Watanabe, S., Oshima, T., Shiratori, Y. & Sasaki, K., Dec 1 2009, ECS Transactions - Solid Oxide Fuel Cells 11 (SOFC-XI). 2 PART 3 ed. p. 1915-1920 6 p. (ECS Transactions; vol. 25, no. 2 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrochemical properties
Anodes
Composite materials
Zirconia
Nickel oxide

Electrochemistry in nano-space of structurally controlled carbon materials

Hayashi, A., Yagi, I., Kimijima, K. & Sasaki, K., Dec 1 2012, Electrochemistry at Nanoscale Dimensions 2. 19 ed. p. 15-23 9 p. (ECS Transactions; vol. 41, no. 19).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrochemistry
Carbon
Platinum
Protons
Water
2 Citations (Scopus)

Electrodeposition of refractory metals from some ZnCl2-based molten salts at 150-250°C

Nohira, T., Nakajima, H., Kitagawa, K., Hagiwara, R., Nitta, K., Inazawa, S. & Okada, K., Dec 1 2007, ECS Transactions - 15th International Symposium on Molten Salts. 35 ed. p. 333-340 8 p. (ECS Transactions; vol. 3, no. 35).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Refractory metals
Electrodeposition
Tungsten
Molten materials
Nickel
5 Citations (Scopus)

Elution and wear of PVA hydrogels by reciprocating friction

Suzuki, A., Sasaki, S., Sasaki, S., Noh, T., Nakashima, K., Yarimitsu, S. & Murakami, T., Jan 1 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), p. 2283-2286 4 p. (5th World Tribology Congress, WTC 2013; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogels
Wear of materials
Friction
41 Citations (Scopus)

EMG-based neuro-fuzzy control of a 4DOF upper-limb power-assist exoskeleton

Kiguchi, K., Imada, Y. & Liyanage, M., Dec 1 2007, 29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07. p. 3040-3043 4 p. 4352969. (Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromyography
Fuzzy control
Upper Extremity
Robots
Controllers

Engineering management framework to achieve a safety of service of an organization on the basis of acceptance by a society

Otsuka, Y. & Noguchi, H., 2007, WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc.. Vol. 4. p. 275-280 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Managers
Specifications

Enhancement of cooling rate during the rapid quencing of a thin wire by ultrasonic vibration

Takamatsu, H., Yamashiro, H. & Honda, H., Oct 1996, 3rd KSME/JSME Thermal Engineering Conference. Vol. Vol.3. p. 339-344 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Enhancement of surface oxygen exchange kinetics for Pr0.1Ce0.9O2-δ with deposition of La or Sm oxide

Zhao, L., Perry, N. H., Sasaki, K. & Bishop, S. R., Jan 1 2015, Solid-Gas Electrochemical Interfaces � SGEI 1. Mogensen, M. B., Ivers-Tiffee, E., Kawada, T. & Adler, S. B. (eds.). 2 ed. Electrochemical Society Inc., p. 157-160 4 p. (ECS Transactions; vol. 66, no. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kinetics
Oxides
Oxygen
Surface cleaning
Solid oxide fuel cells (SOFC)

Establishment of Treatment of Retinal Vein Occlusion by Physical Stimuli of Electrically-Induced Bubbles

Sumimoto, M., Matsumura, D., Ichikawa, K., Miwa, K., Oh, H., Moriizumi, Y. & Yamanishi, Y., Jun 2019, 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII. Institute of Electrical and Electronics Engineers Inc., p. 809-812 4 p. 8808464. (2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

occlusion
Veins
veins
Occlusion
stimuli
1 Citation (Scopus)

Estimation of flooding in PEMFC gas diffusion layer by differential pressure measurement

Ito, K., Ohshima, H., Oie, Y., Ashikaga, K., Kakimoto, Y., Sasaki, K., Miyazaki, T. & Masuda, H., Dec 1 2006, Proceedings of 4th International ASME Conference on Fuel Cell Science, Engineering and Technology, FUELCELL2006. (Proceedings of 4th International ASME Conference on Fuel Cell Science, Engineering and Technology, FUELCELL2006; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Proton exchange membrane fuel cells (PEMFC)
Pressure measurement
Water
Gas supply
1 Citation (Scopus)

Estimation of joint force/torque based on EMG signals

Kiguchi, K., Tamura, K. & Hayashi, Y., Oct 31 2013, Proceedings of the 2013 IEEE Workshop on Robotic Intelligence in Informationally Structured Space, RiiSS 2013 - 2013 IEEE Symposium Series on Computational Intelligence, SSCI 2013. p. 20-24 5 p. 6607924. (Proceedings of the 2013 IEEE Workshop on Robotic Intelligence in Informationally Structured Space, RiiSS 2013 - 2013 IEEE Symposium Series on Computational Intelligence, SSCI 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Muscle
Torque
Hip prostheses
Simulators
Arthroplasty
4 Citations (Scopus)

Estimation of joint torque for a myoelectric arm by genetic programming based on EMG signals

Kiguchi, K. & Hayashi, Y., Dec 14 2012, 2012 World Automation Congress, WAC 2012. 6321048. (World Automation Congress Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Genetic programming
Torque
Robots
Muscle
1 Citation (Scopus)

Estimation of upper-limb motion in sagittal plane based on EEG signals

Hayashi, Y. & Kiguchi, K., Feb 18 2014, 2014 Joint 7th International Conference on Soft Computing and Intelligent Systems, SCIS 2014 and 15th International Symposium on Advanced Intelligent Systems, ISIS 2014. Institute of Electrical and Electronics Engineers Inc., p. 1229-1232 4 p. 7044865

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Robots
Signal processing
Experiments
2 Citations (Scopus)

Estimation of user's hand motion based on EMG and EEG signals

Kiguchi, K., Tamura, K. & Hayashi, Y., Oct 24 2014, World Automation Congress Proceedings. IEEE Computer Society, p. 713-717 5 p. 6936115. (World Automation Congress Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Robots
Brain
Experiments

Estimation of user's motion intention of hand based on both EMG and EEG signals

Kiguchi, K. & Hayashi, Y., Dec 3 2013, ICINCO 2013 - Proceedings of the 10th International Conference on Informatics in Control, Automation and Robotics. p. 447-452 6 p. (ICINCO 2013 - Proceedings of the 10th International Conference on Informatics in Control, Automation and Robotics; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Robots
Brain
Experiments
3 Citations (Scopus)

Estimation of water layer thickness adjacent to the cathode catalyst layer of a PEFC (analysis using electrochemical impedance spectroscopy)

Hoshiko, T., Nakajima, H., Konomi, T., Kitahara, T. & Kita, S., Dec 1 2008, ECS Transactions - Proton Exchange Membrane Fuel Cells 8. 2 PART 2 ed. p. 2117-2123 7 p. (ECS Transactions; vol. 16, no. 2 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrochemical impedance spectroscopy
Fuel cells
Cathodes
Electrolytes
Catalysts
3 Citations (Scopus)

Evaluation and analysis of distortion of complex shaped Ti-6Al-4V compacts by metal injection molding process

Virdhian, S., Osada, T., Kang, H. G., Tsumori, F. & Miura, H., Nov 1 2012, Powder Metallurgy of Titanium: Powder Processing, Consolidation and Metallurgy of Titanium. p. 187-194 8 p. (Key Engineering Materials; vol. 520).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Binders
Machinability
Aerospace applications

Evaluation of a high-speed air turbine microspindle for monitoring machining processes using audible sound and pressure measurements

Guangyu, Z., Murakami, H., Katsuki, A., Sajima, T. & Uchiyama, K., Jan 1 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. Leach, R. (ed.). euspen, p. 151-152 2 p. (Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressed air motors
Acoustic variables measurement
acoustic measurement
Pressure sensors
turbines

Evaluation of fatigue strength of plain and notched specimens of short carbon-fiber reinforced polyetheretherketone in comparison with polyetheretherketone

Nisitani, H., Kim, Y. H. & Noguchi, H., Jan 1 1992, Proc Second Int Offshore Polar Eng Conf. Publ by Int Soc of Offshore and Polar Engineerns (ISOPE), p. 55-62 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon fibers
Fatigue of materials
Mechanics
Fibers
Composite materials

Evaluation of Feel of Fishing Reel by Elucidating the Relationship Between Tactile Sensation and Gear Vibration

Inoue, T. & Kurokawa, S., Jan 1 2020, Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2019 International Conference on Affective and Pleasurable Design. Fukuda, S. (ed.). Springer Verlag, p. 154-164 11 p. (Advances in Intelligent Systems and Computing; vol. 952).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Reels
Gear teeth
Time delay

Evaluation of joint defects on FSW of mg alloy using statistical method

Kinoshita, T., Hayashi, K., Hamada, S., Shigematsu, I. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction stir welding
Statistical methods
Welding
Defects
Railroad rolling stock
1 Citation (Scopus)

Evaluation of local relative slip in a narrow space in hydrogen gas using MEMS optical encoder

Morita, N., Komoda, R., Nakashima, F., Kubota, M., Higurashi, E. & Sawada, R., Sep 13 2016, 2016 International Conference on Optical MEMS and Nanophotonics, OMN 2016 - Proceedings. IEEE Computer Society, 7565861. (International Conference on Optical MEMS and Nanophotonics; vol. 2016-September).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MOEMS
Hydrogen
Gases
Sensors
Mechanical properties
1 Citation (Scopus)

Evaluation of long-term effect on gait improvement for a soft robotic suit

Jin, S., Guo, S., Hashimoto, K. & Yamamoto, M., Mar 23 2018, 2017 IEEE International Conference on Robotics and Biomimetics, ROBIO 2017. Institute of Electrical and Electronics Engineers Inc., p. 1654-1658 5 p. (2017 IEEE International Conference on Robotics and Biomimetics, ROBIO 2017; vol. 2018-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gait
Robotics
Rehabilitation
Evaluation
Patient rehabilitation
11 Citations (Scopus)

Evaluation of perception-assist with an upper-limb power-assist exoskeleton using EMG and EEG signals

Lalitharatne, T. D., Teramoto, K., Hayashi, Y. & Kiguchi, K., Jan 1 2014, Proceedings of the 11th IEEE International Conference on Networking, Sensing and Control, ICNSC 2014. IEEE Computer Society, p. 524-529 6 p. 6819681. (Proceedings of the 11th IEEE International Conference on Networking, Sensing and Control, ICNSC 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromyography
Electroencephalography
Robots
Exoskeleton (Robotics)

Evaluation of the compatibility of high-strength aluminum alloy 7075-T6 to high-pressure gaseous hydrogen environments

Ogawa, Y., Kim, D., Matsunaga, H. & Matsuoka, S., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength alloys
Aluminum alloys
Hydrogen
Fatigue crack propagation
Fuel cells
1 Citation (Scopus)

Evaluation of tribo-coatings in hydrogen atmosphere

Mano, H., Murakami, T., Hata, M., Sasaki, S. & Sugimura, J., 2009, World Tribology Congress 2009 - Proceedings. p. 16 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diamond
Hydrogen
Bearings (structural)
Diamonds
Coatings

Evaluation of wear resistance of cross-linked ultra-high molecular weight polyethylene for joint prostheses in the multi-directional pin-on-plate apparatus

Sawano, T., Murakami, T. & Sawae, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 657-658 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joint prostheses
Ultrahigh molecular weight polyethylenes
Wear resistance
Irradiation
Elongation
3 Citations (Scopus)

Evaluations of a multiple SOMs method for estimating missing values

Arima, K., Okada, N., Tsuji, Y. & Kiguchi, K., Jan 30 2014, 2014 IEEE/SICE International Symposium on System Integration, SII 2014. Institute of Electrical and Electronics Engineers Inc., p. 796-801 6 p. 7028140. (2014 IEEE/SICE International Symposium on System Integration, SII 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Data mining
Self organizing maps
Mathematical models
Experiments
3 Citations (Scopus)

Evolution of reverse flow in a transonic centrifugal compressor at near-surge

Yamada, K., Furukawa, M., Arai, H. & Kanzaki, D., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow fields
Compressors
Unsteady flow