Department of Mechanical Engineering

Research Output 1978 2020

Filter
Conference contribution
Conference contribution
2 Citations (Scopus)

On-line navigation of mobile robot among moving obstacles using ultrasonic sensors

Ushimi, N., Yamamoto, M., Inoue, J., Sugimoto, T., Araoka, M., Matsuoka, T., Kiriki, T., Yamaguchi, Y., Hasegawa, T. & Mohri, A., Dec 1 2002, RoboCup 2001: Robot Soccer World Cup V. p. 477-483 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 2377 LNAI).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic sensors
Mobile Robot
Mobile robots
Navigation
Sensor

On-machine measurement of deep-hole accuracies: Measurement error and its compensation scheme

Katsuki, A., Onikura, H., Sajima, T., Murakami, H., Satou, T., Adachi, Y. & Duck, T., Jan 1 2009, Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. Brinksmeier, E., Burke, T., Van Brussel, H. & Spaan, H. (eds.). euspen, p. 419-422 4 p. (Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engine cylinders
Measurement errors
Machining
Boring machines (machine tools)
Plastics molding

On material qualification and strength design for hydrogen service

Yamabe, J., Matsunaga, H., Furuya, Y. & Matsuoka, S., Jan 1 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Safety factor
Hydrogen
Fatigue crack propagation
Gases
Fatigue testing

On the behavior of well-wetting liquid in a horizontal closed pipe suddenly put under the micro gravity

Takamatsu, H., Fujii, M. & Honda, H., Apr 1996, 2dn European Sympodium : Fluid in Space. p. 426-430 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Citations (Scopus)

On the dynamic model and motion planning for a class of spherical rolling robots

Svinin, M., Morinaga, A. & Yamamoto, M., Jan 1 2012, 2012 IEEE International Conference on Robotics and Automation, ICRA 2012. Institute of Electrical and Electronics Engineers Inc., p. 3226-3231 6 p. 6224795. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion planning
Dynamic models
Robots
Kinematics
Trajectories
1 Citation (Scopus)

On the geometric phase approach to motion planning for a spherical rolling robot in dynamic formulation

Svinin, M. M., Morinaga, A. & Yamamoto, M., Dec 1 2013, IROS 2013: New Horizon, Conference Digest - 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems. p. 2413-2418 6 p. 6696695. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion planning
Robots
Angular velocity
Kinematics
Rotors
3 Citations (Scopus)

On the iterative steering of a rolling robot actuated by internal rotors

Morinaga, A., Svinin, M. M. & Yamamoto, M., Jan 1 2015, Analysis, Modelling, Optimization, and Numerical Techniques, ICAMI 2013. Tost, G. O. & Vasilieva, O. (eds.). Springer New York LLC, p. 205-218 14 p. (Springer Proceedings in Mathematics and Statistics; vol. 121).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rotor
Motion Planning
Robot
Internal
Singularity
1 Citation (Scopus)

On the motion planning of human-like reaching movements by a minimum variance model

Svinin, M. M. & Yamamoto, M., Dec 1 2010, TENCON 2010 - 2010 IEEE Region 10 Conference. p. 933-938 6 p. 5686544. (IEEE Region 10 Annual International Conference, Proceedings/TENCON).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion planning
Specifications
6 Citations (Scopus)

On the motion planning problem for a spherical rolling robot driven by two rotors

Morinaga, A., Svinin, M. & Yamamoto, M., Dec 1 2012, 2012 IEEE/SICE International Symposium on System Integration, SII 2012. p. 704-709 6 p. 6427339. (2012 IEEE/SICE International Symposium on System Integration, SII 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion planning
Rotors
Robots
Controllability
Trajectories
2 Citations (Scopus)

On the percussion center of flexible links

Svinin, M. M., Kaneko, M. & Yamamoto, M., Dec 1 2011, 2011 IEEE International Conference on Robotics and Automation, ICRA 2011. p. 330-335 6 p. 5980529

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flexible manipulators
Motion planning
Dynamic models
Stiffness

Operability study on the multisensory illusion inducible in microsurgical robotic systems

Arata, J., Hattori, M., Sakaguchi, M., Nakadate, R., Oguri, S., Kiguchi, K. & Hashizume, M., Dec 11 2015, IROS Hamburg 2015 - Conference Digest: IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc., Vol. 2015-December. p. 579-584 6 p. 7353430

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rubber
Robotics
End effectors
Robots
Experiments
1 Citation (Scopus)

Optical micro sensors integration and application

Morita, N. & Sawada, R., Jan 13 2015, IEEE CPMT Symposium Japan 2014 - The Leading International Components, Packaging, and Manufacturing Technology Symposium: "Packaging for Future Optoelectronics, RF/High-Speed Electronics and Bioelectronics", ICSJ 2014. Institute of Electrical and Electronics Engineers Inc., p. 3-6 4 p. 7009595. (IEEE CPMT Symposium Japan 2014 - The Leading International Components, Packaging, and Manufacturing Technology Symposium: "Packaging for Future Optoelectronics, RF/High-Speed Electronics and Bioelectronics", ICSJ 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MEMS
Packaging
Sensors
Laser Doppler velocimeters
Optical sensors

Optical performance of a laser point source strongly emitted by an aspheric expander

Park, S., Doi, T., Kurokawa, S. & Ohnishi, O., Apr 30 2012, Ultra-Precision Machining Technologies. p. 304-310 7 p. (Advanced Materials Research; vol. 497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Light sources
Semiconductor lasers
Lasers
Optical systems
Optical design
1 Citation (Scopus)

Optimization of annealing catalyst powder for high temperature PEMWE

Li, H., Nakajima, H. & Ito, K., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 1095-1105 11 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrolytes
Annealing
Membranes
Powders
Catalysts

Optimization of hydrogen embrittlement in Al-Zn-Mg alloys

Shimizu, K., Toda, H., Sasaki, K., Uesugi, K. & Takeuchi, A., Jan 1 2015, Materials Science and Technology Conference and Exhibition 2015, MS and T 2015. Association for Iron and Steel Technology, AISTECH, Vol. 2. p. 1583-1587 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen embrittlement

Optimization of machining conditions of basic-type CMP/P-CVM fusion processing using SiC substrate

Sano, Y., Shiozawa, K., Doi, T., Kurokawa, S., Aida, H., Oyama, K., Miyashita, T., Sumizawa, H. & Yamauchi, K., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7412032

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Machining
Fusion reactions
Polishing
Substrates
3 Citations (Scopus)

Optimum aerodynamic design of centrifugal compressor impeller using an inverse method based on meridional viscous flow analysis

Oka, N., Furukawa, M., Yamada, K., Itou, S., Ibaraki, S., Iwakiri, K. & Hayashi, Y., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Viscous flow
Aerodynamics
Flow fields
Flow separation
5 Citations (Scopus)

Oxidation-induced degradation of SOFC Ni anodes at high fuel utilizations

Kawasaki, T., Sugimoto, J., Tachikawa, Y., Shiratori, Y., Taniguchi, S. & Sasaki, K., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 1345-1352 8 p. (ECS Transactions; vol. 68, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Anodes
Degradation
Oxidation
Partial pressure
2 Citations (Scopus)

Oxide-core Pt-shell electrocatalysts for PEFCs: Photochemical preparation using SnO 2 nanoparticles

Nagamine, M., Noda, Z., Manabe, H., Matsuda, J., Hayashi, A. & Sasaki, K., Jan 1 2018, ECS Transactions. Narayan, S., Weber, A. Z., Xu, H., Mitsushima, S., Shirvanian, P., Jones, D. J., Pintauro, P. N., Strasser, P., Kim, Y-T., Pivovar, B. S., Gochi-Ponce, Y., Mantz, R. A., Fuller, T. F., Buechi, F., Schmidt, T. J., Ramani, V. K., Swider-Lyons, K. E., Coutanceau, C., Fenton, J. M., Ayers, K. E., Gasteiger, H. & Uchida, H. (eds.). 13 ed. Electrochemical Society Inc., p. 531-540 10 p. (ECS Transactions; vol. 86, no. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Nanoparticles
Oxides
Durability
Precious metals
2 Citations (Scopus)

Parallel system using V-shaped shape memory alloy actuator

Ishibashi, R., Oda, T., Tahara, K., Kino, H. & Kojima, A., Jan 1 2012, 2012 Proceedings of SICE Annual Conference, SICE 2012. Society of Instrument and Control Engineers (SICE), p. 1745-1750 6 p. 6318735. (Proceedings of the SICE Annual Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

End effectors
Shape memory effect
Actuators
Tendons
Position control

Particle decoration in super critical fluid to improve the hydrogen sorption cyclability of magnesium

Bobet, J. L., Aymonier, C., Roquefere, J. G., Asano, K. & Akiba, E., Dec 1 2006, 16th World Hydrogen Energy Conference 2006, WHEC 2006. p. 2846-2852 7 p. (16th World Hydrogen Energy Conference 2006, WHEC 2006; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Supercritical fluids
Magnesium
Sorption
Hydrogen
Catalysts
4 Citations (Scopus)

Passive virtual fixtures based on simulated position-dependent anisotropic plasticity

Kikuuwe, R., Takesue, N. & Fujimoto, H., Nov 27 2007, 2007 IEEE International Conference on Robotics and Automation, ICRA'07. p. 3263-3268 6 p. 4209594. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Haptic interfaces
Plasticity
Experiments

Patient-tailored classification for a NIRS triggered hand rehabilitation robot

Takemura, S., Lee, J., Mukae, N., Kiguchi, K., Iihara, K., Hashizume, M. & Arata, J., Jan 14 2019, 2018 IEEE International Conference on Cyborg and Bionic Systems, CBS 2018. Institute of Electrical and Electronics Engineers Inc., p. 632-636 5 p. 8612169. (2018 IEEE International Conference on Cyborg and Bionic Systems, CBS 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Near-infrared Spectroscopy
Rehabilitation
End effectors
Patient rehabilitation
Robotics
2 Citations (Scopus)

PEFC alloy electrocatalysts supported on SnO2: A study on the preparation method

Matsumoto, S., Iwami, M., Noda, Z., Matsuda, J., Hayashi, A. & Sasaki, K., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 851-858 8 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Durability
Alloying
Agglomeration
Heat treatment
3 Citations (Scopus)

Perception-Assist with a Lower-Limb Power-Assist Robot for Sitting Motion

Kiguchi, K. & Yokomine, Y., Jan 12 2016, Proceedings - 2015 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2015. Institute of Electrical and Electronics Engineers Inc., p. 2390-2394 5 p. 7379550. (Proceedings - 2015 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Accidents
Robot
Experiments
Interaction
3 Citations (Scopus)

Performance and long-term durability of nanostructured Ni anodes doped with transition metals prepared by spray mist dryer

Araki, K., Yamamoto, J., Shiratori, Y., Ito, K. & Sasaki, K., Dec 1 2009, ECS Transactions - Solid Oxide Fuel Cells 11 (SOFC-XI). 2 PART 3 ed. p. 2039-2048 10 p. (ECS Transactions; vol. 25, no. 2 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Driers (materials)
Fog
Transition metals
Anodes
Durability

Performance enhancement of Ni-loaded paper-structured catalyst for dry reforming of methane by the dispersion of ceria-based oxides

Tu, P. H., Nguyen, T. G. H., Sakamoto, M., Uchida, T., Doan, T. C. D., Dang, M. C. & Shiratori, Y., Jan 1 2019, Solid Oxide Fuel Cells 16, SOFC 2019. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 1661-1670 10 p. (ECS Transactions; vol. 91, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cerium compounds
Reforming reactions
Methane
Solid oxide fuel cells (SOFC)
Catalysts

Performance of an anode-supported honeycomb solid oxide fuel cell

Nakajima, H., 2014, THERMEC 2013. Trans Tech Publications Ltd, Vol. 783-786. p. 1698-1703 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

solid oxide fuel cells
Solid oxide fuel cells (SOFC)
Anodes
anodes
Channel flow

Performance of SOFC power unit assisted by paper-structured catalyst

Shiratori, Y., Sakamoto, M., Tran, Q. T., Uchiyama, Y. & Uchiyama, N., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 2783-2788 6 p. (ECS Transactions; vol. 68, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Catalysts
Exhaust systems (engine)
Fibers
Hydrocarbons
1 Citation (Scopus)

Photochemical preparation of Pt electrocatalysts on Sn02 support for PEFCs

Nagamine, M., Noda, Z., Matsumoto, S., Matsuda, J., Hayashi, A. & Sasaki, K., Jan 1 2017, ECS Transactions. Shirvanian, P. A., Ramani, V., Kim, Y-T., Gasteiger, H. A., Shinohara, K., Ayers, K. E., Pivovar, B. S., Jones, D. J., Uchida, H., Perry, K. A., Mitsushima, S., Xu, H., Schmidt, T. J., Fenton, J. M., Fuller, T. F., Strasser, P., Buechi, F., Swider-Lyons, K. E., Mantz, R. A., Narayan, S., Pintauro, P. N., Coutanceau, C. & Weber, A. Z. (eds.). 8 ed. Electrochemical Society Inc., p. 773-780 8 p. (ECS Transactions; vol. 80, no. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Catalyst supports
Durability
Oxides
Irradiation

Physical Burden on Caregivers Pushing Wheelchairs

Kadomatsu, H., Sudo, S., Nakashima, Y. & Yamamoto, M., Apr 25 2019, Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019. Institute of Electrical and Electronics Engineers Inc., p. 401-405 5 p. 8700400. (Proceedings of the 2019 IEEE/SICE International Symposium on System Integration, SII 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

wheelchairs
Wheelchairs
pushing
muscular strength
posture
1 Citation (Scopus)

Physical explanations of tip leakage flow field in an axial compressor rotor

Inoue, M., Furukawa, M., Saiki, K. & Yamada, K., Jan 1 1998, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Flow fields
Vortex flow
Rotors
Leakage (fluid)
3 Citations (Scopus)

Pinching 2D object with arbitrary shape by two robot fingers under rolling constraints

Yoshida, M., Arimoto, S. & Tahara, K., Dec 11 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2009. p. 1805-1810 6 p. 5354836

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Point contacts
Kinematics
Differential equations
Computer simulation
17 Citations (Scopus)

Piston slap induced noise and vibration of internal combustion engines (1st Report, Theoretical Analysis and Simulation)

Ohta, K., Irie, Y., Yamamoto, K. & Ishikawa, H., Dec 1 1987, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engine cylinders
Internal combustion engines
Pistons
Equations of motion
Diesel engines

Planning method of collision-free trajectory for two manipulators

Marushima, S., Yamamoto, M. & Mohri, A., Dec 1 1991, Intelligence for Mechanical Systems. IEEE, p. 547-552 6 p. (Intelligence for Mechanical Systems; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manipulators
Trajectories
Planning
Torque
6 Citations (Scopus)

Plasma jet ignition in turbulent lean mixtures

Murase, E., Ono, S., Hanada, K. & Nakahara, S., Dec 1 1989, International Congress and Exposition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plasma jets
Ignition
Flammability
Combustion chambers
Orifices
3 Citations (Scopus)

Polishing mechanism of glass substrates with its processing characteristics by cerium oxide and manganese oxide slurries

Yamazaki, T., Doi, T. K., Kurokawa, S., Isayama, S., Umezaki, Y., Matsukawa, Y., Kono, H., Akagami, Y., Yamaguchi, Y. & Kawase, Y., Dec 29 2010, Advances in Precision Engineering. p. 141-145 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manganese oxide
Slurries
Cerium
Polishing
Abrasives
39 Citations (Scopus)

Position control of fishing line artificial muscles (coiled polymer actuators) from nylon thread

Arakawa, T., Takagi, K., Tahara, K. & Asaka, K., Jan 1 2016, Electroactive Polymer Actuators and Devices (EAPAD) 2016. Vidal, F. & Bar-Cohen, Y. (eds.). SPIE, 97982W. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9798).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

fishing
Artificial muscle
Position Control
Nylon (trademark)
threads
13 Citations (Scopus)

Position control of twisted and coiled polymer actuator using a controlled fan for cooling

Takagi, K., Arakawa, T., Takeda, J., Masuya, K., Tahara, K. & Asaka, K., Jan 1 2017, Electroactive Polymer Actuators and Devices (EAPAD) 2017. Bar-Cohen, Y. (ed.). SPIE, 101632V. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10163).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Position Control
Position control
fans
Fans
Cooling

Possible growth region of single-walled carbon nanotube in CVD synthesis on the CHO components diagram

Inoue, S., Tomie, T., Matsumura, Y. & Kohno, M., Dec 1 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011. (ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Single-walled carbon nanotubes (SWCN)
Chemical vapor deposition
Vacuum furnaces
Hydrogen
Carbon
2 Citations (Scopus)

Prediction of engine sound and sound quality control using wavelet transform

Yoshizumi, K., Ohta, K., Honda, I., Suganuma, N. & Ajiro, K., 2006, 13th International Congress on Sound and Vibration 2006, ICSV 2006. Vol. 7. p. 5704-5711 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

quality control
wavelet analysis
engines
acoustics
predictions

Prediction of liner cavitation occurrence considering the vibro-acoustic characteristics of engine structure and water coolant passage

Ohta, K., Wang, X. Y., Saeki, A. & Yoshida, D., Jan 1 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations, (ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

water pressure
coolants
linings
cavitation flow
Cavitation

Prediction of the fatigue limit of prestrained carbon steel under tensile mean stress

Kang, M., Irisa, K., Aono, Y. & Noguchi, H., 2009, Fatigue and Fracture Mechanics: 36th Volume. American Society for Testing and Materials, Vol. 1508 STP. p. 164-182 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon steel
Fatigue of materials
Hardness
Defects

Prediction of tool failure in ceramic grinding

Inoue, T., Emura, T., Shimizu, K. & Kunitomi, S., 2010, COMADEM 2010 - Advances in Maintenance and Condition Diagnosis Technologies Towards Sustainable Society, Proc. 23rd Int. Congr. Condition Monitoring and Diagnostic Engineering Management. p. 521-528 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Amplitude modulation
grinding
ceramics
prediction
Fourier transform
2 Citations (Scopus)

Preparation and hydrogen storage properties of Mg-Ni-B BCC alloys

Shao, H., Asano, K., Enoki, H. & Akiba, E., Dec 1 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 ed. p. 1625-1628 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen storage
Hydrogen
Mechanical alloying
Ball milling
Crystallite size
2 Citations (Scopus)

Preparation of iridium/SnO2/VGCF electrocatalysts for water electrolysis

Anai, H., Matsuda, J., Noda, Z., Tachikawa, Y., Hayashi, A., Ito, K. & Sasaki, K., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 1129-1135 7 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Iridium
Electrolysis
Carbon fibers
Vapors
1 Citation (Scopus)

Process analysis for achieving highly enhanced total efficiency on multi-stage fuel supplied SOFC system

Tachikawa, Y., Matsuzaki, Y., Hatae, T., Taniguchi, S. & Sasaki, K., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 3107-3113 7 p. (ECS Transactions; vol. 68, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Mixed gas fuels
Anodes

Processing characteristics of SiC wafer by consideration of oxidation effect in different atmospheric environment

Zhang, J., Kurokawa, S., Hayashi, T., Asakawa, E. & Wang, C., Jan 20 2015, ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014. Institute of Electrical and Electronics Engineers Inc., p. 279-282 4 p. 7017299. (ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon carbide
Oxidation
Processing
Hardness
Semiconductor materials
4 Citations (Scopus)

Propagation of multiple short length-scale stall cells in an axial compressor rotor

Inoue, M., Kuroumaru, M., Tanino, T. & Furukawa, M., Jan 1 1999, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Turbomachine blades
Vortex flow
Pressure transducers
1 Citation (Scopus)

Proposal of cleanliness evaluation method of CMP pad, and investigation of cleaning effect by the high-pressure jet

Kitamura, M., Kurokawa, S., Tokumoto, Y., Hayashi, T., Hiyama, H., Wada, Y. & Takatoh, C., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7411952. (2015 International Conference on Planarization/CMP Technology, ICPT 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Cleaning
Debris
Surface properties