Department of Mechanical Engineering

Research Output 1978 2020

Filter
Conference contribution
Conference contribution
3 Citations (Scopus)

Heat transfer to non-azeotropic mixtures of refrigerants flowing in a horizontal evaporator tube

Yoshida, S., Mori, H., Matsunaga, T. & Ohishi, K., Dec 1 1991, Proc 3 ASME JSME Therm Eng Jt Conf. Publ by ASME, p. 295-300 6 p. (Proc 3 ASME JSME Therm Eng Jt Conf).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Refrigerants
Evaporators
Heat transfer
Forced convection
Two phase flow

Heterogeneous integration towards an ultra-compact and thin optical displacement microsensor

Higurashi, E., Suga, T. & Sawada, R., Dec 31 2009, ISOT 2009 - International Symposium on Optomechatronic Technologies. p. 209-214 6 p. 5326083. (ISOT 2009 - International Symposium on Optomechatronic Technologies).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microsensors
Displacement measurement
Interferometers
Temperature

High accuracy analysis method for 3D nanoscale deformation / fracture characteristics inside a material

Nakazawa, M., Kobayashi, M., Toda, H. & Aoki, Y., Jan 1 2010, Proceedings of SICE Annual Conference 2010, SICE 2010 - Final Program and Papers. Society of Instrument and Control Engineers (SICE), p. 577-584 8 p. 5602327. (Proceedings of the SICE Annual Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

High-backdrivable parallel-link manipulator with continuously variable transmission

Tahara, K., Iwasa, S., Naba, S. & Yamamoto, M., Dec 29 2011, IROS'11 - 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems: Celebrating 50 Years of Robotics. p. 1843-1848 6 p. 6048069. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manipulators
Actuators
Sensory feedback
Feedback control
Dynamic models

High functionality of an optical fiber stylus for micro metrology

Murakami, H., Katsuki, A., Sajima, T., Uchiyama, K., Yamamoto, T., Nagata, R. & Fujiyoshi, K., Jan 1 2019, Laser Metrology and Machine Performance XIII - 13th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2019. Blunt, L. & Knapp, W. (eds.). euspen, p. 73-77 5 p. (Laser Metrology and Machine Performance XIII - 13th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

metrology
Optical fibers
optical fibers
Coatings
coatings

Highly sensitive charge mobility of suspended monolayer graphene

Takamatsu, H., Wang, H., Takahashi, K. & Xing, Z., Mar 2017, 6th International Symposium on Micro and Nano Technology.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Citations (Scopus)

High speed microrobot actuation in a microfluidic chip by levitated structure with riblet surface

Hagiwara, M., Kawahara, T., Iijima, T., Yamanishi, Y. & Arai, F., Jan 1 2012, 2012 IEEE International Conference on Robotics and Automation, ICRA 2012. Institute of Electrical and Electronics Engineers Inc., p. 2517-2522 6 p. 6225276. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microfluidics
Friction
Fabrication
Dry etching
Fluids
4 Citations (Scopus)

High temperature and fatigue properties of injection moulded superalloy compacts

Miura, H., Ikeda, H., Iwahashi, T. & Osada, T., Jan 1 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), (Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
injection molding
heat resistant alloys
Superalloys
Injection molding

Human Elbow Joint Motion Change Induced by Tonic Vibration Reflex with Vibration Stimulation

Honda, K. & Kiguchi, K., Dec 2018, MHS 2018 - 2018 29th International Symposium on Micro-NanoMechatronics and Human Science. Institute of Electrical and Electronics Engineers Inc., 8887032. (MHS 2018 - 2018 29th International Symposium on Micro-NanoMechatronics and Human Science).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

reflexes
stimulation
Muscle
Vibration
vibration
2 Citations (Scopus)

Hybrid active noise barrier with sound masking

Wang, X., Koba, Y., Ishikawa, S. & Kijimoto, S., Jan 1 2014, INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control. Davy, J., Burgess, M., Don, C., Dowsett, L., McMinn, T. & Broner, N. (eds.). Australian Acoustical Society, (INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

masking
acoustics
conversation
loudness
privacy
1 Citation (Scopus)

Hydrogen-assisted cracking of Cr-Mo steel in slow strain rate tensile test with high-pressure gaseous hydrogen

Matsunaga, H., Yoshikawa, M., Kondo, R., Itoga, H., Yamabe, J. & Matsuoka, S., Jan 1 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strain rate
Hydrogen
Steel
Gases
Tensile strength

Hydrogen-assisted degradation of high-strength stainless steel with a newly developed aluminum-based coating in high-pressure hydrogen gas environment

Yamabe, J., Takakuwa, O., Awane, T. & Matsuoka, S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
Stainless steel
Aluminum
Degradation
Coatings

Hydrogen-assisted fatigue crack propagation in a commercially pure BCC iron

Birenis, D., Ogawa, Y., Matsunaga, H., Takakuwa, O., Prytz, Ø., Yamabe, J. & Thøgersen, A., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Iron
Hydrogen
Plastic deformation
Cracks

Hydrogen embrittlement of binary high Mn austenitic steels

Koyama, M., Sawaguchi, T. & Tsuzaki, K., Jan 1 2017, ICF 2017 - 14th International Conference on Fracture. Gdoutos, E. E. (ed.). International Conference on Fracture, p. 75-76 2 p. (ICF 2017 - 14th International Conference on Fracture; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen embrittlement
Austenitic steel
Martensite
Binary alloys
Austenite

Hydrogen exposure effect on tensile strength of high strength steel sharp notched specimen

Suzuki, Y., Itoga, H., Hamada, S. & Noguchi, H., Dec 1 2009, 12th International Conference on Fracture 2009, ICF-12. p. 3556-3563 8 p. (12th International Conference on Fracture 2009, ICF-12; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
tensile strength
Tensile strength
steel
hydrogen
1 Citation (Scopus)

Hydrogen gas effects on the fatigue crack growth behavior of Cr-Mo Steel CT specimen in extremely low rate range

Tazoe, K., Oda, Y. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Hydrogen
Steel
Gases
Helium

Hydrogen-induced ductility loss in cast irons

Usuda, T., Matsuno, K., Matsunaga, H., Yanase, K. & Endo, M., Apr 10 2013, Advanced Materials Science and Technology. p. 260-263 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

ductility
Cast iron
Graphite
Ductility
casts

Hydrogen-induced ductility loss of austenitic stainless steels for slow strain rate tensile testing in high-pressure hydrogen gas

Matsuoka, S., Yamabe, J. & Matsunaga, H., Jan 1 2017, Materials Structure and Micromechanics of Fracture VIII. Sandera, P. (ed.). Trans Tech Publications Ltd, p. 259-264 6 p. (Solid State Phenomena; vol. 258 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

austenitic stainless steels
Tensile testing
Austenitic stainless steel
ductility
strain rate

Hydrogen trapping in X70 structural pipeline steel and weldments

Sezgin, J. G., Fjær, H. G., Matsunaga, H., Yamabe, J. & Oldeng, V., Jan 1 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 228-235 8 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pipelines
Hydrogen
Steel
Activation energy
Thermal desorption

Hydrogen uptake in hardened steels under repeated contact

Sugimura, J., Yamanaka, T. & Tanaka, H., Jan 1 2013, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), 1 p. (5th World Tribology Congress, WTC 2013; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Hydrogen

Hydrogen viscosity measurements with capillary tube under high pressure

Uehara, T., Yoshimura, K., Yusibani, E., Shinzato, K., Kohno, M. & Takata, Y., Dec 1 2013, ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013. V001T01A006. (ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Capillary tubes
Viscosity measurement
Hydrogen
Tube
Viscosity
2 Citations (Scopus)

Hydrophilic and hydrophobic double MPL coated GDL to enhance PEFC performance under low and high humidity conditions

Kitahara, T., Nakajima, H. & Mori, K., Dec 1 2011, Polymer Electrolyte Fuel Cells 11. 1 ed. p. 593-601 9 p. (ECS Transactions; vol. 41, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Atmospheric humidity
Electrolytes
Polyvinyl alcohols

Hydrotalcite-dispersed paper-structured catalyst for dry reforming of methane

Kakihara, Y., Shiratori, Y., Sakamoto, M., Takada, M., Uchida, T., Le, H. & Sasaki, K., Jan 1 2014, 20th World Hydrogen Energy Conference, WHEC 2014. Committee of WHEC2014, p. 1411-1415 5 p. (20th World Hydrogen Energy Conference, WHEC 2014; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reforming reactions
Solid oxide fuel cells (SOFC)
Methane
Catalysts
Electrochemical oxidation
1 Citation (Scopus)

Impact of balancing wedge action in textured hydrodynamic bearings

Yagi, K. & Sugimura, J., Jan 1 2013, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), p. 1009-1012 4 p. (5th World Tribology Congress, WTC 2013; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Hydrodynamics
2 Citations (Scopus)

Impact of high-speed image recognition of transition phenomenon of chip formation and chip flow in gear hobbing process

Umezaki, Y., Kurokawa, S. & Ariura, Y., Aug 18 2010, Measurement Technology and Intelligent Instruments IX. p. 189-193 5 p. (Key Engineering Materials; vol. 437).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Image recognition
Gears
Steel
High speed cameras
Video cameras

Impact of water flow rate on current efficiency in solid polymer water electrolyzer under 2 MPa condition

Ito, K., Maeda, Y., Sakaguchi, T., Inada, A. & Nakajima, H., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Shinohara, K., Narayanan, S. R., Swider-Lyons, K., Weber, A., Coutanceau, C., Mantz, R., Gasteiger, H. A., Jones, D., Edmundson, M., Mitsushima, S., Ramani, V., Meas, Y., Fuller, T., Uchida, H., Buchi, F. N., Perry, K. A., Schmidt, T. J., Fenton, J. M. & Strasser, P. (eds.). 3 ed. Electrochemical Society Inc., p. 1019-1028 10 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow rate
Cathodes
Polymers
Water
Hydrogen

Impedance spectra associated with metal deposition at the negative electrode from contaminating metal particles at the positive electrode in a lithium ion battery

Nakajima, H., Inada, A., Kitahara, T. & Nagata, Y., Jan 1 2016, Failure Mode and Mechanism Analyses. Yang, Y., Yoon, W-S., Pannala, S., Liaw, B. Y., Uchimoto, Y. & Nanda, J. (eds.). 23 ed. Electrochemical Society Inc., p. 27-36 10 p. (ECS Transactions; vol. 75, no. 23).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrodes
Metals
Dissolution
Electrochemical impedance spectroscopy
Electrodeposition
15 Citations (Scopus)

Improved single crystalline mirror actuated electrostatically by terraced electrodes with high-aspect ratio torsion spring

Sawada, R., Yamaguchi, J., Higurashi, E., Shimizu, A., Yamamoto, T., Takeuchi, N. & Uenishi, Y., Jan 1 2003, 2003 IEEE/LEOS International Conference on Optical MEMS. Institute of Electrical and Electronics Engineers Inc., p. 153-154 2 p. 1233512. (2003 IEEE/LEOS International Conference on Optical MEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torsional stress
Aspect ratio
Mirrors
Crystalline materials
Electrodes
9 Citations (Scopus)

Improved velocity feedback for position control by using a quadratic sliding mode filter

Jin, S., Kikuuwe, R. & Yamamoto, M., Dec 1 2011, ICCAS 2011 - 2011 11th International Conference on Control, Automation and Systems. p. 1207-1212 6 p. 6106111. (International Conference on Control, Automation and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Position control
Friction
Feedback
Sensors
Derivatives
1 Citation (Scopus)

Improvement in drilling performance of micro compound tool

Ohnishi, O., Onikura, H., Eguchi, T., Aziz, M., Doi, T. & Kurokawa, S., Dec 29 2010, Advances in Precision Engineering. p. 96-100 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Drilling
Electroplating
Diamond
Peeling
Diamonds
1 Citation (Scopus)

Improvement of fatigue strength for titanium alloy compacts by MIM

Jungho, C., Osada, T., Kudo, K., Tsumori, F. & Miura, H., Jan 1 2015, Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015. Metal Powder Industries Federation, (Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
injection molding
titanium alloys
Titanium alloys
Injection molding
7 Citations (Scopus)

Improvement of Solid Oxide Fuel Cell by imprinted patterns on eelectrolyte

Xu, Y., Tsumori, F., Hashimoto, S., Takahashi, M., Kang, H., Osada, T. & Miura, H., Sep 2 2013, 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2013. p. 887-890 4 p. 6559865

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ceramics
Solid oxide fuel cells (SOFC)
Oxides
Electrolytes
Electrodes
1 Citation (Scopus)

Improvement of structure in a honeycomb porous plate for pool boiling CHF enhancement

Maruoka, N., Mori, S. & Okuyama, K., Jan 1 2017, Student Paper Competition. American Society of Mechanical Engineers (ASME), (International Conference on Nuclear Engineering, Proceedings, ICONE; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Porous plates
Boiling liquids
Heat flux
Water
Liquid films
3 Citations (Scopus)

Impurity poisoning of SOFCs

Sasaki, K., Haga, K., Yoshizumi, T., Minematsu, D., Yuki, E., Liu, R. R., Uryu, C., Oshima, T., Taniguchi, S., Shiratori, Y. & Ito, K., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 3 PART 3 ed. p. 2805-2814 10 p. (ECS Transactions; vol. 35, no. 3 PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Impurities
Oxidants
Raw materials
Durability
5 Citations (Scopus)

Incorporating geometric algorithms in impedance- And admittance-type haptic rendering

Kikuuwe, R. & Fujimoto, H., Aug 28 2007, Proceedings - Second Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, World Haptics 2007. p. 249-254 6 p. 4145183. (Proceedings - Second Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, World Haptics 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Virtual reality
Damping
Experiments

Indirect internal reforming SOFC accommodating graded-catalytic domain fabricated by paper-structured catalyst

Aydın, Matsumoto, G., Kubota, A., Tran, D. L., Sakamoto, M. & Shiratori, Y., Jan 1 2019, Solid Oxide Fuel Cells 16, SOFC 2019. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 1631-1640 10 p. (ECS Transactions; vol. 91, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reforming reactions
Solid oxide fuel cells (SOFC)
Catalysts
Thermal stress
Flow fields
3 Citations (Scopus)

Influence of alcohol consumption on blood flow as detected using a micro integrated laser Doppler blood flowmeter

Iwasaki, W., Ito, H., Nogami, H., Sawada, R., Takeuchi, S., Furue, M., Kimura, Y., Onoe, A. & Higurashi, E., Dec 1 2010, Proceedings - 1st International Conference on Sensor Device Technologies and Applications, SENSORDEVICES 2010. p. 236-241 6 p. 5632179. (Proceedings - 1st International Conference on Sensor Device Technologies and Applications, SENSORDEVICES 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flowmeters
Alcohols
Blood
Lasers
Sensors
1 Citation (Scopus)

Influence of ascorbic acid(AsA) concentration in culture medium on mechanical property of regenerated cartilage

Omata, S., Sawae, Y. & Murakami, T., Dec 1 2009, World Congress on Medical Physics and Biomedical Engineering: Biomaterials, Cellular and Tissue Engineering, Artificial Organs. 10 ed. p. 177-180 4 p. (IFMBE Proceedings; vol. 25, no. 10).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ascorbic acid
Cartilage
Ascorbic Acid
Culture Media
Mechanical properties

Influence of carbon deposition on the current distribution in an anode-supported planar solid oxide fuel cell in-situ assessed by segmented electrodes

Sasaki, K., Nakajima, H. & Kitahara, T., Jan 1 2019, Solid Oxide Fuel Cells 16, SOFC 2019. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 549-554 6 p. (ECS Transactions; vol. 91, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Anodes
Degradation
Electrodes
Carbon

Influence of cathode polarization change on chromium deposited on electrolyte surface near cathode reaction sites of SOFC

Ishibashi, D., Park, E., Taniguchi, S., Inoue, Y., Chou, J. T. & Sasaki, K., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 1031-1037 7 p. (ECS Transactions; vol. 68, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Chromium
Cathodes
Electrolytes
Polarization
3 Citations (Scopus)

Influence of cathode polarization on the chromium poisoning of SOFC cathodes consisting of LSM, LSCF and LNF

Park, E., Taniguchi, S., Chou, J. T., Tachikawa, Y., Shiratori, Y. & Sasaki, K., Dec 1 2012, Materials Degradation in Energy Systems: Corrosion and Hydrogen-Material Interactions. 30 ed. p. 21-25 5 p. (ECS Transactions; vol. 50, no. 30).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Chromium
Cathodes
Polarization
Current density
2 Citations (Scopus)

Influence of convective heat transfer by air flow on local current/temperatures along microtubular solid oxide fuel cells in-situ identified by electrode-segmentation method for Co- and counter-flow configurations

Aydin, Ö., Nakajima, H. & Kitahara, T., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 2141-2150 10 p. (ECS Transactions; vol. 68, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Heat transfer
Electrodes
Air
Flow velocity

Influence of current load on the growth of SrZrO3 at the GDC/YSZ interface

Inoue, Y., Chou, J. T., Kawabata, T., Matsuda, J., Taniguchi, S. & Sasaki, K., Jan 1 2019, Solid Oxide Fuel Cells 16, SOFC 2019. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 847-852 6 p. (ECS Transactions; vol. 91, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gadolinium
Yttria stabilized zirconia
Cerium compounds
Cathodes
High resolution electron microscopy
4 Citations (Scopus)

Influence of gas diffusion layers with microporous layer on the performance of polymer electrolyte fuel cells

Kitahara, T., Konomi, T. & Nakajima, H., Dec 1 2009, ECS Transactions -Proton Exchange Membrane Fuel Cells 9. 1 PART 2 ed. p. 1735-1744 10 p. (ECS Transactions; vol. 25, no. 1 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Electrolytes
Polymers
Atmospheric humidity
1 Citation (Scopus)

Influence of GDL coated with MPL containing CNTs on PEFC performance under low and high humidity conditions

Kitahara, T., Nakajima, H. & Okamura, K., 2014, Polymer Electrolyte Fuel Cells 14. 3 ed. Electrochemical Society Inc., Vol. 64. p. 477-483 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Carbon nanotubes
Atmospheric humidity
Electrolytes

Influence of hydrogen on tensile and fatigue life properties of 304/308 austenitic stainless steel butt welded joints

Okazaki, S., Matsunaga, H., Nakamura, M., Matsuoka, S. & Hamada, S., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Welds
Fatigue of materials
Hydrogen
Martensitic transformations
2 Citations (Scopus)

Influence of hydrophilic and hydrophobic double MPL coated GDL on PEFC performance

Kitahara, T., Nakajima, H., Mori, K. & Inamoto, M., Dec 1 2012, Polymer Electrolyte Fuel Cells 12, PEFC 2012. 2 ed. p. 437-444 8 p. (ECS Transactions; vol. 50, no. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Electrolytes
Atmospheric humidity
Polymers
4 Citations (Scopus)

Influence of hydrophilic and hydrophobic double MPL coated GDL on PEFC performance without cathode humidification

Kitahara, T., Nakajima, H. & Konomi, T., Dec 1 2010, Polymer Electrolyte Fuel Cells 10, PEFC 10. 1 PART 2 ed. Vol. 33. p. 1089-1097 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Cathodes
Electrolytes
Polyvinyl alcohols
4 Citations (Scopus)

Influence of hydrophilic and hydrophobic triple MPL coated GDL on the oxygen transport resistance in a PEFC under high humidity conditions

Kitahara, T., Nakajima, H. & Okamura, K., Jan 1 2015, Polymer Electrolyte Fuel Cells 15, PEFC 15. Gasteiger, H. A., Ramani, V. K., Fenton, J. M., Schmidt, T. J., Jones, D. J., Ayers, K. E., Perry, K. A., Fuller, T. F., Pivovar, B. S., Shinohara, K., Buchi, F. N., Mantz, R. A., Coutanceau, C., Strasser, P., Weber, A. Z., Swider-Lyons, K., Uchida, H., Edmundson, M., Mitsushima, S. & Narayanan, S. R. (eds.). 17 ed. Electrochemical Society Inc., p. 1313-1322 10 p. (ECS Transactions; vol. 69, no. 17).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Atmospheric humidity
Electrolytes
Oxygen
9 Citations (Scopus)

Influence of inclusions on fatigue characteristics of non-combustible Mg alloy

Kitahara, Y., Shimazaki, H., Yabu, T., Noguchi, H., Sakamoto, M. & Ueno, H., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 359-362 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Ignition
Particle size analysis
Machining