Department of Mechanical Engineering

Research Output 1978 2020

Filter
Conference contribution
2006
5 Citations (Scopus)

The development of a new joint mechanism based on human shoulder morphology

Sakai, N., Sawae, Y. & Murakami, T., Dec 22 2006, Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006. p. 982-987 6 p. 1639219. (Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wire
Muscle
Neural networks
Inverse kinematics
Feedback control
8 Citations (Scopus)

Velocity-bounding stiff position controller

Kikuuwe, R., Yamamoto, T. & Fujimoto, H., Dec 1 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2006. p. 3050-3055 6 p. 4058861. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sliding mode control
Three term control systems
Controllers
Position control
Robots
2005
3 Citations (Scopus)

Air/water two-phase flow performance of contra-rotating axial flow pump and rotational speed control of rear rotor

Shigemitsu, T., Watanabe, S., Furukawa, A. & Okuma, K., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 912-917 6 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Speed control
Two phase flow
Rotors
Pumps
3 Citations (Scopus)

Air/water two-phase flow performance of contra-rotating axial flow pump and rotational speed control of rear rotor

Shigemitsu, T., Watanabe, S., Furukawa, A. & Okuma, K., Dec 20 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Symposia, FEDSM2005. p. 1069-1074 6 p. FEDSM2005-77002. (Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference; vol. 1 PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Speed control
Two phase flow
Rotors
Pumps

A new method for in-situ harvesting of a taget cell

Takamatsu, H., Okano, H., Fukuda, Y. & Matsuda, T., Dec 1 2005, Proceedings of the 2005 Summer Bioengineering Conference, 2005 SBC. p. 273-274 2 p. (Proceedings of the 2005 Summer Bioengineering Conference; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A study on burning behavior of rich premixed-spray jets with different fuel volatilities

Nakamoto, K., Kikuchi, Y., Moriue, O., Mikami, M. & Kojima, N., 2005, 5th Asia-Pacific Conference on Combustion, ASPACC 2005: Celebrating Prof. Bob Bilger's 70th Birthday. p. 217-220 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atomization
Liquid fuels
octane
tridecane

Dependence of gas transportation in radial lip seals on oil and gas

Sugimura, J., Gondo, S. & Yamamoto, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - WTC 2005. (Proceedings of the World Tribology Congress III - WTC 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seals
Gases
Mineral oils
Flow rate
Viscosity

Dependence of gas transportation in radial lip seals on oil and gas

Sugimura, J., Gondo, S. & Yamamoto, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 265-266 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seals
Gases
Flow rate
Viscosity
Mineral oils
3 Citations (Scopus)

Development of a practical high-performance laser-guided deep-hole boring tool: Boring of steel workpieces

Katsuki, A., Onikura, H., Sajima, T., Park, H. K., Zhen, J. G. & Murakami, H., 2005, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boring tools
Boring
Steel
Lasers
1 Citation (Scopus)

Effects of hydrogen environment on fatigue characteristics of 18Cr-8Ni stainless steel

Kawamoto, K., Aoki, Y., Oda, Y., Yoshimura, T., Noguchi, H. & Higashida, K., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 283-286 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
stainless steels
Hydrogen
Stainless steel
Gases
3 Citations (Scopus)

Effects of operating conditions on gas suction of radial lip seals

Nakaoka, S., Sato, Y., Gondo, S., Sugimura, J. & Yamamoto, Y., Dec 1 2005, Papers presented at: Sealing for Pollution Prevention and Control - 18th International Conference of Fluid Sealing. Hoyes, J. (ed.). p. 263-270 8 p. (18th International Conference of Fluid Sealing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seals
Gases
Pumps
Air
Gas chromatography

Evaluation of wear resistance of cross-linked ultra-high molecular weight polyethylene for joint prostheses in the multi-directional pin-on-plate apparatus

Sawano, T., Murakami, T. & Sawae, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 657-658 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joint prostheses
Ultrahigh molecular weight polyethylenes
Wear resistance
Irradiation
Elongation
1 Citation (Scopus)

Experimental investigation of heat transfer in square and circular minichannel air flow for wide range of pressure ratio

Hara, K., Furukawa, M. & Akihiro, N., Nov 21 2005, Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005. p. 381-388 8 p. ICMM2005-75184. (Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005; vol. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer coefficients
Heat transfer
Air
Pipe flow
Copper
1 Citation (Scopus)

Experimental study of forced convective boiling heat transfer for refrigerants in a horizontal, spirally grooved steel tube

Momoki, S., Higashiiue, S., Shigechi, T., Yamaguchi, T. & Mori, H., 2005, ECOS 2005 - Proceedings of the 18th International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems. Tapir Academic Press, p. 897-904 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Refrigerants
Boiling liquids
Heat transfer coefficients
Heat transfer
Steel
40 Citations (Scopus)

Fixed-step friction simulation: From classical coulomb model to modern continuous models

Kikuuwe, R., Takesue, N., Sano, A., Mochiyama, H. & Fujimoto, H., Dec 1 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. p. 3910-3917 8 p. 1545579. (2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction
Computer simulation
Hysteresis
Experiments
14 Citations (Scopus)

Garage parking planning and control of car-like robot using a real time optimization method

Yamamoto, M., Hayashi, Y. & Mohri, A., Dec 1 2005, 2005 IEEE International Symposium on Assembly and Task Planning, ISATP. p. 248-253 6 p. 1511481. (Proceedings of the IEEE International Symposium on Assembly and Task Planning; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Railroad cars
Robots
Planning
Tires
Kinematics
21 Citations (Scopus)

Haptic illusions induced by moving line stimuli

Mochiyama, H., Sano, A., Takesue, N., Kikuuwe, R., Fujita, K., Fukuda, S., Marui, K. & Fujimoto, H., Jan 1 2005, Proceedings - 1st Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems; World Haptics Conference, WHC 2005. Institute of Electrical and Electronics Engineers Inc., p. 645-648 4 p. 1407040. (Proceedings - 1st Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems; World Haptics Conference, WHC 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wire
10 Citations (Scopus)

Heat transfer study under supercritical pressure conditions for single rod test section

Mori, H., Yoshida, S., Morooka, S. & Komita, H., 2005, Proceedings of the American Nuclear Society - International Congress on Advances in Nuclear Power Plants 2005, ICAPP'05. Vol. 3. p. 1548-1556 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer
Boilers
Water
Pipe flow
Coolants
9 Citations (Scopus)

Influence of inclusions on fatigue characteristics of non-combustible Mg alloy

Kitahara, Y., Shimazaki, H., Yabu, T., Noguchi, H., Sakamoto, M. & Ueno, H., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 359-362 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Ignition
Particle size analysis
Machining

Influences of impeller diameter and diffuser blades on air-water two-phase flow performance of centrifugal pump

Matsushita, N., Furukawa, A., Okuma, K. & Watanabe, S., Dec 19 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Forums, FEDSM2005. p. 59-64 6 p. FEDSM2005-77388. (Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Two phase flow
Flow rate
Air
Water
1 Citation (Scopus)

Influences of impeller diameter and diffuser blades on air-water two-phase flow performance of centrifugal pump

Matsushita, N., Furukawa, A., Okuma, K. & Watanabe, S., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 1704-1709 6 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Two phase flow
Flow rate
Air
Water
4 Citations (Scopus)

Investigation of flooding phenomena in PEMFC by two-phase flow numerical simulation

Ito, K., Masuda, H., Miyazaki, T., Kakimoto, Y. & Masuoka, T., Nov 21 2005, Proceedings of the 3rd International Conference on Fuel Cell Science, Engineering, and Technology, 2005. Shah, R. K., Ubong, E. U. & Samuelsen, S. S. (eds.). p. 19-24 6 p. FUELCELL-74170. (Proceedings of the 3rd International Conference on Fuel Cell Science, Engineering, and Technology, 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proton exchange membrane fuel cells (PEMFC)
Two phase flow
Computer simulation
Current density
Water
1 Citation (Scopus)

Low-temperature direct flip-chip bonding for integrated micro-systems

Higurashi, E., Suga, T. & Sawada, R., 2005, 18th Annual Meeting of the IEEE Lasers and Electro-Optics Society, LEOS 2005. Vol. 2005. p. 121-122 2 p. 1547908

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface emitting lasers
Temperature
Plasmas
Substrates
Shear strength
7 Citations (Scopus)

Low-temperature LD direct bonding for highly functional optical MEMS

Higurashi, E., Itoh, T., Suga, T. & Sawada, R., 2005, IEEE/LEOS Optical MEMS 2005: International Conference on Optical MEMS and Their Applications. p. 201-202 2 p. 1540149

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MOEMS
Surface emitting lasers
Temperature
Plasmas
Substrates

Modification of microscopic zirconia surface structure for improvement in tribological characteristics of uhmwpe-on-zirconia sliding pair for joint prostheses

Sawae, Y., Murakami, T., Qiwei, H. & Sawano, T., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 661-662 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joint prostheses
Ultrahigh molecular weight polyethylenes
Surface structure
Zirconia
Crystal microstructure

Quality improvement of micro metal injection moulding using micro/nano powders

Nishiyabu, K., Kakishita, K., Osada, T., Matsuzaki, S. & Tanaka, S., Jan 1 2005, Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), p. 357-363 7 p. (Euro PM 2005: Powder Metallurgy Congress and Exhibition; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Copper powder
injection molding
Injection molding
Powders
1 Citation (Scopus)

Rolling contact fatigue of bearing steel in hydrogen environment

Tanaka, H., Sugimura, J., Hashimoto, M. & Yamamoto, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 155-156 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Fatigue of materials
Hydrogen
Steel
1 Citation (Scopus)

Safe automatic emergency stop control of gantry crane including moving obstacles in its workspace

Yamamoto, M., Honda, E. & Mohri, A., Dec 1 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation. p. 253-258 6 p. 1570128. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gantry cranes
Cranes
Collision avoidance
Experiments
1 Citation (Scopus)

Stability-optimized clearance configuration of fluid-film journal bearings

Matsuda, K., Kanemitsu, Y. & Kijimoto, S., Dec 1 2005, Proceedings of the ASME International Design Engineering Techn. Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mechanical Vibration and Noise. p. 1097-1105 9 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 1 B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Journal bearings
Fluids
Rotors
Fourier series
4 Citations (Scopus)

Steady analysis of thermodynamic effect of partial cavitation using singularity method

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 2161-2167 7 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Surges (fluid)
Fluids
Heat conduction

Steady analysis of thermodynamic effect of partial cavitation using singularity method

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Forums, FEDSM2005. Vol. 2. p. 567-573 7 p. FEDSM2005-77387

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Surges (fluid)
Fluids
Heat conduction

Surface activated flip-chip bonding of laser chips

Higurashi, E., Suga, T., Nakagawa, M. & Sawada, R., 2005, Proceedings of the ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems: Advances in Electronic Packaging 2005. Vol. PART A. p. 793-796 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lasers
Surface emitting lasers
Plasmas
Substrates
Shear strength

The cooperative effects of protein and lipid on wear behavior of ultra-high molecular weight polyethylene

Sawae, Y. & Murakami, T., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 663-664 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrahigh molecular weight polyethylenes
Lipids
Wear of materials
Proteins
Lubricants

The potential of touch technology

Mochiyama, H., Sano, A., Takesue, N., Kikuuwe, R. & Fujimoto, H., Dec 1 2005, 2005 IEEE Workshop on Advanced Robotics and its Social Impacts. p. 210-213 4 p. 1511653. (2005 IEEE Workshop on Advanced Robotics and its Social Impacts; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Display devices
Textures
Inspection
Wire
Sensors

Thermal analysis on filling process in hydrogen tank

Koshimizu, T., Takata, Y., Kasao, D. & Monde, M., Dec 1 2005, Proceedings of the ASME Heat Transfer Division 2005. 1 ed. p. 141-148 8 p. (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; vol. 376 HTD, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermoanalysis
Hydrogen
Gases
Temperature
Numerical analysis
3 Citations (Scopus)

Three dimensional heat transmission simulation of supercritical pressure fluid

Kitou, K., Chaki, M., Ishii, Y., Matsuura, M., Shioiri, A., Mori, H. & Yoshida, S., 2005, Proceedings of the American Nuclear Society - International Congress on Advances in Nuclear Power Plants 2005, ICAPP'05. Vol. 4. p. 2255-2264 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluids
Turbulence models
Hot Temperature
Water
8 Citations (Scopus)

Tracking assist system using virtual friction field

Takesue, N., Kikuuwe, R., Sano, A., Mochiyama, H. & Fujimoto, H., Dec 1 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. p. 2134-2139 6 p. 1545292. (2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction
Industrial plants
Experiments

Wear reduction by functional protein boundary film on Poly(vinyl alcohol) hydrogel

Nakashima, K., Sawae, Y. & Murakami, T., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 655-656 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogels
Alcohols
Wear of materials
Proteins
Joint prostheses
2004

Activated wear by lubricant constituents in boundary lubrication and protective role of boundary lubrication in joint prostheses

Murakami, T., Sawae, Y., Doi, S., Yamamoto, K. & Takahara, A., Dec 1 2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joint prostheses
Lubrication
Lubricants
Wear of materials
Ultrahigh molecular weight polyethylenes
3 Citations (Scopus)

Effect of protein contained in lubricant for wear properties of pva hydrogel as artificial cartilage

Nakashima, K., Murakami, T. & Sawae, Y., Dec 1 2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cartilage
Hydrogels
Lubricants
Wear of materials
Polyvinyl acetates
2 Citations (Scopus)

Effects of lipids and proteins on wear of prosthetic hip joint materials

Sawae, Y., Murakami, T. & Sawano, T., 2004, Transactions - 7th World Biomaterials Congress. p. 342 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Prosthetics
Lipids
Wear of materials
Proteins
Joint prostheses
2 Citations (Scopus)

Nanostructuring of PEFC electrode catalysts using carbon nanofibers

Sasaki, K., Shinya, K., Tanaka, S., Furukawa, A., Ando, K., Kuroki, T., Kusaba, H. & Teraoka, Y., Dec 1 2004, Proton Conducting Membrane Fuel Cells IV - Proceedings of the International Symposium. p. 159-170 12 p. (Proceedings - Electrochemical Society; vol. PV 2004-21).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon nanofibers
Fuel cells
Electrolytes
Electrodes
Catalysts

Novel hydrides with [Al-H] bonding synthesized by hydrogenation of intermetallic compounds

Akiba, E., An, Z. Q. & Nakamura, Y., Jul 14 2004, Advanced Materials for Energy Conversion II. Chandra, D., Bautista, R. G. & Schlabach, L. (eds.). p. 83-90 8 p. (Advanced Materials for Energy Conversion II).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrides
Hydrogenation
Intermetallics
Binary alloys
Hydrogen
2 Citations (Scopus)

Study on Joule-Thomson micro-cooler

Naganuma, K., Takata, Y., Kubota, H. & Takahashi, K., Sep 29 2004, Proceedings of the Second International Conference on Microchannels and Minichannels (ICMM2004). Kandlikar, S. G., Celata, G. P., Nishio, S., Stephan, P. & Thonon, B. (eds.). p. 769-772 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Refrigerants
Capillary tubes
Evaporators
Silicones
Etching
1 Citation (Scopus)

Transient response analysis of polymer electrolyte fuel cell considering equivalent circuit, mass and heat conservation

Ito, K., Koori, H., Onda, K., Masuda, H. & Masuoka, T., Sep 13 2004, Fuel Cell Science, Engineering and Technology - 2004. Shah, R. K. & Kandlikar, S. G. (eds.). p. 85-92 8 p. (Fuel Cell Science, Engineering and Technology - 2004).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transient analysis
Equivalent circuits
Fuel cells
Conservation
Electrolytes
2003
3 Citations (Scopus)

Development of air/water two-phase flow centrifugal pump and its operating characteristics

Furukawa, A., Okuma, K., Ohshita, S. & Watanabe, S., Dec 1 2003, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 1, part B, Forums. Ogut, A., Tsuji, Y., Kawahashi, M., Ogut, A., Tsuji, Y. & Kawahashi, M. (eds.). p. 1413-1418 6 p. (Proceedings of the ASME/JSME Joint Fluids Engineering Conference; vol. 1 B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Two phase flow
Flow rate
Water
Pumps
15 Citations (Scopus)

Experiments and simple modelling of hydrodynamic lubrication in radial shaft seals

Sato, Y., Seki, K., Sugimura, J. & Yamamoto, Y., Dec 1 2003, 17th International Conference on Fluid Sealing. Hoyes, J. (ed.). p. 139-156 18 p. (International Conference on Fluid Sealing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lubrication
Seals
Rubber
Hydrodynamics
Surface roughness

Fatigue characteristics of aluminum cast alloy AC2B-T6 with cast skin

Ohama, S., Yoshimura, T. & Noguchi, H., Dec 1 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 55-63 9 p. (Advances in Damage Mechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Skin
Fatigue of materials
Aluminum
Microstructure
Vickers hardness
2 Citations (Scopus)

Feedback Control of Omni-Directional Vehicles Using Two Wheels Caster Type Odometer

Ushimi, N., Yamamoto, M. & Mohri, A., 2003, IEEE International Conference on Intelligent Robots and Systems. Vol. 4. p. 3540-3545 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feedback control
Wheels
Trajectories

Heat transfer characteristics of a natural circulation liquid cooling system for electronic components

Takamatsu, H., Honda, H., Wei, J. J. & Yamashiro, H., Mar 2003, 6th ASME/JSME Thermal Engineering Conference (CD-ROM). p. TED-AJ03-1

Research output: Chapter in Book/Report/Conference proceedingConference contribution