Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
2006
1 Citation (Scopus)

Deformation microstructures in a two-phase stainless steel during large strain deformation

Tsuzaki, K., Belyakov, A. & Kimura, Y., Dec 1 2006, Nanomaterials by Severe Plastic Deformation, NanoSPD3 - Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastics Deformation. p. 305-310 6 p. (Materials Science Forum; vol. 503-504).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
stainless steels
Stainless steel
swaging
microstructure

Development of a laser-guided deep-hole evaluating probe: An exchangeable measuring unit for a counter-boring head

Katsuki, A., Onikura, H., Sajima, T., Zhen, J. G., Park, H. K. & Murakami, H., Jan 1 2006, Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. Zervos, H. (ed.). euspen, p. 528-531 4 p. (Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boring
Engine cylinders
counters
Lasers
probes

Development of an ultrasonic vibration spindle with an aerostatic bearing for micro drilling

Onikura, H., Ohnishi, O., Sajima, T., Koga, T. & Moriya, M., Jan 1 2006, Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. Zervos, H. (ed.). euspen, p. 321-324 4 p. (Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
aerostatics
spindles
drilling
Vibrations (mechanical)
1 Citation (Scopus)

Development of a training system for intraoral radiography

Tokuyasu, T., Yamamoto, M., Okamura, K. & Yoshiura, K., Dec 27 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. p. 3286-3291 6 p. 1642203. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Radiography
Cones
Students
X rays
Laptop computers
14 Citations (Scopus)

Development of high dexterity minimally invasive surgical system with augmented force feedback capability

Takahashi, H., Warisawa, S., Mitsuishi, M., Arata, J. & Hashizume, M., Dec 22 2006, Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006. p. 284-289 6 p. 1639100. (Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surgery
Feedback
Display devices
Friction
Experiments

Development of pressure sensitive molecular film as a measurement technique for micro-and nano-devices

Mori, H., Matsuda, Y., Niimi, T., Uenishi, H. & Sakazaki, Y., Dec 1 2006, 2006 IEEE International Symposium on Micro-Nano Mechanical and Human Science, MHS. 4110414. (2006 IEEE International Symposium on Micro-Nano Mechanical and Human Science, MHS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Paint
Molecules
diagnostic
Langmuir Blodgett films
regime
7 Citations (Scopus)

Effect of wake passing on unsteady aerodynamic performance in a turbine stage

Yamada, K., Hiroma, K., Hirano, Y., Funazaki, K., Tsutsumi, M. & Matsuo, A., Nov 15 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 757-767 11 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aerodynamics
Turbines
Stators
Rotors
Vortex flow

Electrodeposition of refractory metals in medium-temperature molten salts

Nakajima, H., Nohira, T. & Hagiwara, R., Dec 1 2006, Molten Salts XIV - Proceedings of the International Symposium. p. 945-954 10 p. (Proceedings - Electrochemical Society; vol. PV 2004-24).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Refractory metals
Electrolysis
Electrodeposition
Molten materials
Salts
1 Citation (Scopus)

Estimation of flooding in PEMFC gas diffusion layer by differential pressure measurement

Ito, K., Ohshima, H., Oie, Y., Ashikaga, K., Kakimoto, Y., Sasaki, K., Miyazaki, T. & Masuda, H., Dec 1 2006, Proceedings of 4th International ASME Conference on Fuel Cell Science, Engineering and Technology, FUELCELL2006. (Proceedings of 4th International ASME Conference on Fuel Cell Science, Engineering and Technology, FUELCELL2006; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Proton exchange membrane fuel cells (PEMFC)
Pressure measurement
Water
Gas supply
4 Citations (Scopus)

Evaluation of laser trapping probe properties for coordinate measurement

Michihata, M., Takaya, Y., Miyoshi, T. & Hayashi, T., Dec 1 2006, Optomechatronic Sensors, Instrumentation, and Computer-Vision Systems. 637509. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6375).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Trapping
Standing Wave
Probe
trapping
standing waves
1 Citation (Scopus)

Experimental and numerical analysis of high heat transfer phenomenon in minichannel gaseous cooling

Hara, K., Furukawa, M. & Akihiro, N., 2006, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006. Vol. 2006 A. p. 625-634 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical analysis
Heat transfer
Cooling
Pressure gradient
Turbulence models
5 Citations (Scopus)

Experimental and numerical investigations of wake passing effects upon aerodynamic performance of a LP turbine linear cascade with variable solidity

Funazaki, K. I., Yamada, K., Ono, T., Segawa, K. I., Hamazaki, H., Takahashi, A. & Tanimitsu, H., Nov 15 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 637-648 12 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cascades (fluid mechanics)
Aerodynamics
Turbines
Airfoils
Pneumatics
10 Citations (Scopus)

Fine-grained structure formation in Al- Mg- Sc alloy during hot ECAP

Sitdikov, O., Kaibyshev, R., Avtokratova, E. & Tsuzaki, K., Dec 1 2006, Nanomaterials by Severe Plastic Deformation, NanoSPD3 - Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastics Deformation. p. 721-726 6 p. (Materials Science Forum; vol. 503-504).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Equal channel angular pressing
Hot pressing
pressing
fine structure
Grain refinement
7 Citations (Scopus)

Indentation-induced deformation behavior in martensitic steel observed through in-situ nanoindentation in a transmission electron microscopy

Ohmura, T., Minor, A., Tsuzaki, K. & Morris, J. W., Dec 1 2006, Nanomaterials by Severe Plastic Deformation, NanoSPD3 - Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastics Deformation. p. 239-244 6 p. (Materials Science Forum; vol. 503-504).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Martensitic steel
Nanoindentation
Indentation
Grain boundaries
Transmission electron microscopy
2 Citations (Scopus)

Integrated micro-displacement sensor that can measure tilting or linear motion for an external mirror

Sawada, R., Higurashi, E., Sanada, S., Chino, D. & Ishikawa, I., 2006, IEEE/LEOS International Conference on Optical MEMS and Their Applications Conference, 2006. p. 52-53 2 p. 1708260

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mirrors
rangefinding
Surface emitting lasers
mirrors
surface emitting lasers
2 Citations (Scopus)

Low-force kinesthetic guidance for accurate positioning and tracking

Kikuuwe, R., Yamamoto, T. & Fujimoto, H., Nov 17 2006, 14th Symposium onHaptics Interfaces for Virtual Environment andTeleoperator Systems 2006 - Proceedings. p. 491-498 8 p. 1627114. (14th Symposium onHaptics Interfaces for Virtual Environment andTeleoperator Systems 2006 - Proceedings; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sliding mode control
Manipulators
Robotics
Actuators
Torque
4 Citations (Scopus)

Low noise design of diesel engine induced by piston slap

Suganuma, N., Yoshizumi, K., Honda, I. & Ohta, K., Dec 1 2006, 13th International Congress on Sound and Vibration 2006, ICSV 2006. p. 5673-5680 8 p. (13th International Congress on Sound and Vibration 2006, ICSV 2006; vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

diesel engines
pistons
low noise
engine noise
moments

Low temperature direct bonding of flip-chip mounting VCSEL to Si substrate

Imamura, T., Higurashi, E., Suga, T. & Sawada, R., Dec 1 2006, 2006 International Microsystems, Packaging,Assembly Conference Taiwan, IMPACT - Proceedings of Technical Papers. p. 185-188 4 p. 4107477. (2006 International Microsystems, Packaging,Assembly Conference Taiwan, IMPACT - Proceedings of Technical Papers).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface emitting lasers
Mountings
Substrates
Temperature
Argon
1 Citation (Scopus)

Modeling of eddy current damper composed of spherical magnet and conducting shell

Takayama, Y., Sueoka, A. & Kondou, T., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Applied Mechanics Division. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Applied Mechanics Division, AMD).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Eddy currents
Magnets
Magnetic fields
Damping
Magnetic flux
21 Citations (Scopus)

Neuro-fuzzy based motion control of a robotic exoskeleton: Considering end-effector force vectors

Kiguchi, K., Rahman, M. H. & Sasaki, M., Dec 27 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. p. 3146-3151 6 p. 1642180. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion control
End effectors
Robotics
Robots
Muscle

Numerical analysis of electro-thermal phenomena in metal by boltzmann transport equation for electron

Ito, K., Muramoto, R., Shiozawa, I., Kakimoto, Y. & Masuoka, T., 2006, Proceedings of the ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems: Advances in Electronic Packaging 2005. Vol. PART C. p. 2099-2103 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical analysis
Electrons
Microfabrication
Thermoelectric power
Metals

Numerical simulation of fuel spray ignition through the comparison to a droplet in a cell

Moriue, O. & Murase, E., 2006, 10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ignition
Computer simulation
Heptane
Gases
Temperature

Numerical simulation of two-phase flow and transient response in polymer electrolyte fuel cell

Masuda, H., Miyazaki, T., Ito, K., Ashikaga, K., Kakimoto, Y. & Sasaki, K., Dec 1 2006, Proceedings of 4th International ASME Conference on Fuel Cell Science, Engineering and Technology, FUELCELL2006. (Proceedings of 4th International ASME Conference on Fuel Cell Science, Engineering and Technology, FUELCELL2006; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transient analysis
Two phase flow
Fuel cells
Electrolytes
Computer simulation
18 Citations (Scopus)

On control mechanism of human-like reaching movements with musculo-skeletal redundancy

Tahara, K., Luo, Z. W. & Arimoto, S., Dec 1 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2006. p. 1402-1409 8 p. 4058568. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Redundancy
Muscle
Computer simulation
Feedback control
Manipulators

Particle decoration in super critical fluid to improve the hydrogen sorption cyclability of magnesium

Bobet, J. L., Aymonier, C., Roquefere, J. G., Asano, K. & Akiba, E., Dec 1 2006, 16th World Hydrogen Energy Conference 2006, WHEC 2006. p. 2846-2852 7 p. (16th World Hydrogen Energy Conference 2006, WHEC 2006; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Supercritical fluids
Magnesium
Sorption
Hydrogen
Catalysts
2 Citations (Scopus)

Prediction of engine sound and sound quality control using wavelet transform

Yoshizumi, K., Ohta, K., Honda, I., Suganuma, N. & Ajiro, K., 2006, 13th International Congress on Sound and Vibration 2006, ICSV 2006. Vol. 7. p. 5704-5711 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

quality control
wavelet analysis
engines
acoustics
predictions
65 Citations (Scopus)

Proxy-based sliding mode control for accurate and safe position control

Kikuuwe, R. & Fujimoto, H., Dec 27 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. p. 25-30 6 p. 1641156. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Three term control systems
Position control
Sliding mode control
Industrial robots
Recovery

Real time 3-D observation of osmotic dehydration process of isolated cells by a laser confocal scanning microscope

Takamatsu, H. & Yoshimori, T., Sep 2006, Kyushu University KAIST Joint Seminar 2006. p. 127-128 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Citations (Scopus)

Research program of a super fast reactor

Oka, Y., Ishiwatari, Y., Liu, J., Terai, T., Nagasaki, S., Muroya, Y., Abe, H., Mori, H., Akiba, M., Akimoto, H., Okumura, K., Akasaka, N. & Goto, S., Dec 1 2006, Proceedings of the 2006 International Congress on Advances in Nuclear Power Plants, ICAPP'06. Vol. 2006. p. 344-350 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fast reactors
Water cooled reactors
Water
Hydraulics
Heat transfer
12 Citations (Scopus)

Self-sensing three-pole magnetic bearing using a Kalman filter

Matsuda, K., Kijimoto, S. & Kanemitsu, Y., 2006, 2006 SICE-ICASE International Joint Conference. p. 1590-1594 5 p. 4109221

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnetic bearings
Kalman filters
Poles
Low pass filters
Cutoff frequency

Site occupation disorder and hydrogen sorption properties of pseudo-AB 2 compounds: REMgNi(4-x)Alx with RE = La, Ce, Gd

Roquefere, J. G., Bobet, J. L., Chevalier, B., Akiba, E. & Asano, K., Dec 1 2006, 16th World Hydrogen Energy Conference 2006, WHEC 2006. p. 2853-2862 10 p. (16th World Hydrogen Energy Conference 2006, WHEC 2006; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical alloying
Sorption
Hydrogen
Rare earths
Lattice constants

Structural - Acoustic coupled analysis in consideration of sound absorption characteristics of materials

Park, Y. C., Kanemitsu, Y., Kijimoto, S., Matsuda, K. & Koba, Y., Dec 1 2006, Institute of Noise Control Engineering of the USA - 35th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2006. p. 2177-2186 10 p. (Institute of Noise Control Engineering of the USA - 35th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2006; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sound transmission
acoustics
material absorption
flow resistance
porous materials
3 Citations (Scopus)

Surface wettability effects in heat and fluid flow

Takata, Y., 2006, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006. Vol. 2006 B. p. 1333-1341 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wetting
Flow of fluids
Heat transfer
Boiling liquids
Contact angle
5 Citations (Scopus)

The development of a new joint mechanism based on human shoulder morphology

Sakai, N., Sawae, Y. & Murakami, T., Dec 22 2006, Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006. p. 982-987 6 p. 1639219. (Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wire
Muscle
Neural networks
Inverse kinematics
Feedback control
8 Citations (Scopus)

Velocity-bounding stiff position controller

Kikuuwe, R., Yamamoto, T. & Fujimoto, H., Dec 1 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2006. p. 3050-3055 6 p. 4058861. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sliding mode control
Three term control systems
Controllers
Position control
Robots
2005
3 Citations (Scopus)

Air/water two-phase flow performance of contra-rotating axial flow pump and rotational speed control of rear rotor

Shigemitsu, T., Watanabe, S., Furukawa, A. & Okuma, K., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 912-917 6 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Speed control
Two phase flow
Rotors
Pumps
3 Citations (Scopus)

Air/water two-phase flow performance of contra-rotating axial flow pump and rotational speed control of rear rotor

Shigemitsu, T., Watanabe, S., Furukawa, A. & Okuma, K., Dec 20 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Symposia, FEDSM2005. p. 1069-1074 6 p. FEDSM2005-77002. (Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference; vol. 1 PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Speed control
Two phase flow
Rotors
Pumps

A new method for in-situ harvesting of a taget cell

Takamatsu, H., Okano, H., Fukuda, Y. & Matsuda, T., Dec 1 2005, Proceedings of the 2005 Summer Bioengineering Conference, 2005 SBC. p. 273-274 2 p. (Proceedings of the 2005 Summer Bioengineering Conference; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of pressure sensitive luminophores for micro- and nano-systems

Yu, M., Mori, H., Niimi, T., Uenishi, H. & Hirako, M., Dec 1 2005, Proceedings of the 2005 International Symposium on Micro-NanoMechatronics and Human Science, Eighth Symposium on Micro- and Nano-Mechatronics for Information-Based Society - The 21st Century COE Progr. p. 267-272 6 p. 1590002. (Proceedings of the 2005 International Symposium on Micro-NanoMechatronics and Human Science, Eighth Symposium on Micro- and Nano-Mechatronics for Information-Based Society - The 21st Century COE Progr; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Paint
Fluxes
Pressure measurement
Pressure distribution
Flow of gases

Application of PSP to surface pressure measurement in high knudsen number flows

Mori, H., Niimi, T., Hirako, M. & Oshima, Y., May 16 2005, RAREFIED GAS DYNAMICS: 24th International Symposium on Rarefied Gas Dynamics, RGD24. p. 1319-1324 6 p. (AIP Conference Proceedings; vol. 762).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

pressure sensitive paints
Knudsen flow
pressure measurement
rarefied gases
solid surfaces

A study on burning behavior of rich premixed-spray jets with different fuel volatilities

Nakamoto, K., Kikuchi, Y., Moriue, O., Mikami, M. & Kojima, N., 2005, 5th Asia-Pacific Conference on Combustion, ASPACC 2005: Celebrating Prof. Bob Bilger's 70th Birthday. p. 217-220 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atomization
Liquid fuels
octane
tridecane

Dependence of gas transportation in radial lip seals on oil and gas

Sugimura, J., Gondo, S. & Yamamoto, Y., 2005, Proceedings of the World Tribology Congress III - WTC 2005.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seals
Gases
Mineral oils
Flow rate
Viscosity

Dependence of gas transportation in radial lip seals on oil and gas

Sugimura, J., Gondo, S. & Yamamoto, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 265-266 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seals
Gases
Flow rate
Viscosity
Mineral oils
46 Citations (Scopus)

Development of a dexterous minimally-invasive surgical system with augmented force feedback capability

Arata, J., Mitsuishi, M., Warisawa, S., Tanaka, K., Yoshizawa, T. & Hashizume, M., Dec 1 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. p. 3738-3743 6 p. 1545551. (2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feedback
Robotics
Surgery
Cables
Tissue
3 Citations (Scopus)

Development of a practical high-performance laser-guided deep-hole boring tool: Boring of steel workpieces

Katsuki, A., Onikura, H., Sajima, T., Park, H. K., Zhen, J. G. & Murakami, H., 2005, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boring tools
Boring
Steel
Lasers
1 Citation (Scopus)

Effects of hydrogen environment on fatigue characteristics of 18Cr-8Ni stainless steel

Kawamoto, K., Aoki, Y., Oda, Y., Yoshimura, T., Noguchi, H. & Higashida, K., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 283-286 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
stainless steels
Hydrogen
Stainless steel
Gases
3 Citations (Scopus)

Effects of operating conditions on gas suction of radial lip seals

Nakaoka, S., Sato, Y., Gondo, S., Sugimura, J. & Yamamoto, Y., Dec 1 2005, Papers presented at: Sealing for Pollution Prevention and Control - 18th International Conference of Fluid Sealing. Hoyes, J. (ed.). p. 263-270 8 p. (18th International Conference of Fluid Sealing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seals
Gases
Pumps
Air
Gas chromatography
2 Citations (Scopus)

Elastic properties of heat resistant steels after long-term creep exposure

Sawada, K., Ohmura, T., Ohba, T., Tsuzaki, K., Abe, F., Kimura, K. & Nonaka, I., Dec 1 2005, Proceedings - ECCC Creep Conference: Creep and Fracture in High Temperature Components - Design and Life Assessment Issues. p. 268-278 11 p. (Proceedings - ECCC Creep Conference: Creep and Fracture in High Temperature Components - Design and Life Assessment Issues; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Creep
Elastic moduli
Steel
Aging of materials
Ultrasonics

Evaluation of wear resistance of cross-linked ultra-high molecular weight polyethylene for joint prostheses in the multi-directional pin-on-plate apparatus

Sawano, T., Murakami, T. & Sawae, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 657-658 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joint prostheses
Ultrahigh molecular weight polyethylenes
Wear resistance
Irradiation
Elongation
5 Citations (Scopus)

Experimental analyses of flow field structures around clustered linear aerospike nozzles

Taniguchi, M., Mori, H., Nishihira, R. & Niimi, T., May 16 2005, RAREFIED GAS DYNAMICS: 24th International Symposium on Rarefied Gas Dynamics, RGD24. p. 349-354 6 p. (AIP Conference Proceedings; vol. 762).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

nozzles
flow distribution
pressure ratio
vacuum chambers
rocket launching