Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
Conference contribution
1 Citation (Scopus)

Stable MEMS electrostatic comb-driven scanning mirror via feedback of comb electrostatic capacitance

Ishikawa, N., Okazaki, K., Kudo, A. & Sawada, R., Sep 13 2016, 2016 International Conference on Optical MEMS and Nanophotonics, OMN 2016 - Proceedings. IEEE Computer Society, Vol. 2016-September. 7565866

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MEMS
Electrostatics
Mirrors
Capacitance
Scanning
1 Citation (Scopus)

Stable simulation of flexible cable-like objects by using serial kinematic chains with high number of passive degrees-of-freedom

Cisneros, R., Kikuuwe, R., Nakaoka, S. & Kanehiro, F., Feb 22 2017, 2016 IEEE International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2016. Institute of Electrical and Electronics Engineers Inc., p. 119-126 8 p. 7862385. (2016 IEEE International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Degrees of freedom (mechanics)
Kinematics
Cables
Friction
Hose

Steady analysis of thermodynamic effect of partial cavitation using singularity method

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Forums, FEDSM2005. Vol. 2. p. 567-573 7 p. FEDSM2005-77387

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Surges (fluid)
Fluids
Heat conduction
4 Citations (Scopus)

Steady analysis of thermodynamic effect of partial cavitation using singularity method

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 2161-2167 7 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Surges (fluid)
Fluids
Heat conduction

Stiffness evaluation of a tendon-driven robot with variable joint stiffness mechanisms

Matsutani, Y., Tahara, K., Kino, H. & Ochi, H., Dec 22 2017, 2017 IEEE-RAS 17th International Conference on Humanoid Robotics, Humanoids 2017. IEEE Computer Society, Vol. Part F134101. p. 213-218 6 p. (IEEE-RAS International Conference on Humanoid Robots).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tendons
Stiffness
Robots
Wire

Strength evaluation of polycrystalline silicon structure considering sidewall morphology

Hamada, S. & Sugimoto, Y., Dec 1 2009, 12th International Conference on Fracture 2009, ICF-12. p. 4249-4258 10 p. (12th International Conference on Fracture 2009, ICF-12; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polysilicon
silicon
surface area
Surface analysis
surface roughness

Structural - Acoustic coupled analysis in consideration of sound absorption characteristics of materials

Park, Y. C., Kanemitsu, Y., Kijimoto, S., Matsuda, K. & Koba, Y., Dec 1 2006, Institute of Noise Control Engineering of the USA - 35th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2006. p. 2177-2186 10 p. (Institute of Noise Control Engineering of the USA - 35th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2006; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sound transmission
acoustics
material absorption
flow resistance
porous materials
1 Citation (Scopus)

Structural studies of hydrogen storage alloys using x-ray/neutron diffraction and total scattering

Nakamura, Y., Kim, H., Yamazaki, S., Sakaki, K., Proffen, T. & Akiba, E., Dec 1 2011, Recent Developments in Materials for Hydrogen Storage and Carbon-Capture Technologies. p. 13-17 5 p. (Materials Research Society Symposium Proceedings; vol. 1334).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen storage alloys
Neutron diffraction
neutron diffraction
Hydrogen
x ray diffraction

Studies on the direct control of the start of HCCI combustion with rapid compression expansion machine

Komai, Y., Nakashima, F., Hashimoto, H., Moriue, O. & Murase, E., 2012, Proceedings of the 8th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2012. p. 446-451 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ignition
Combustion
Compression
Charge
Flame
9 Citations (Scopus)

Study of a 4DOF upper-limb power-assist exoskeleton with perception-assist: Second stage of power-assist

Kiguchi, K. & Liyanage, M., Dec 1 2008, BIODEVICES 2008 - Proceedings of the 1st International Conference on Biomedical Electronics and Devices. p. 164-169 6 p. (BIODEVICES 2008 - Proceedings of the 1st International Conference on Biomedical Electronics and Devices; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sensors
Experiments
1 Citation (Scopus)

Study of human motion generation based on redundancy of musculoskeletal structure: Analysis of potential generated by internal force for two-link system

Kino, H., Ochi, H., Tahara, K., Matsutani, Y. & Ishibashi, R., Dec 1 2013, 2013 IEEE Workshop on Advanced Robotics and Its Social Impacts, ARSO 2013 - Conference Digest. p. 1-6 6 p. 6705497. (Proceedings of IEEE Workshop on Advanced Robotics and its Social Impacts, ARSO).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Musculoskeletal system
Redundancy
Muscle
Sensory feedback
Feedforward control

Study of the anti-fouling polymer sheet which used biomimetics technique

Sekiguchi, A., Matsumoto, Y., Minami, H., Nishino, T., Tanigawa, H., Tokumaru, K. & Tsumori, F., Jan 1 2018, Biosensing and Nanomedicine XI. Agahi, M. H., Razeghi, M., Mohseni, H. & Agahi, M. H. (eds.). SPIE, 107280L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10728).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

antifouling
biomimetics
Biomimetics
Fouling
snails
3 Citations (Scopus)

Study of thermo-diffusive effects on iso-octane/air flames at fixed turbulence Karlovitz number

Hayakawa, A., Takeo, T., Miki, Y., Nagano, Y. & Kitagawa, T., 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbulence
Air
Dilution
Explosions
1 Citation (Scopus)

Study on an opposed-injection stratified-charge combustion system

Kitagawa, T., Kido, H. & Ishida, H., 1991, ASME/JSME Thermal Engineering Joint Conference. Publ by ASME, p. 253-258 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stratified charge engines
Hydrocarbons
Jet fuel
Fuel injection
Direct injection
1 Citation (Scopus)

Study on a novel CMP/P-CVM fusion processing system (Type B) and its basic characteristics

Oyama, K., Sano, Y., Aida, H., Kim, S., Nishizawa, H., Doi, T. K., Kurokawa, S., Miyashita, T. & Yamazaki, T., Jan 20 2015, ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014. Institute of Electrical and Electronics Engineers Inc., p. 142-146 5 p. 7017266. (ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical mechanical polishing
Fusion reactions
Processing
Substrates
Polishing
1 Citation (Scopus)

Study on cooperative multiple manipulators with passive joints

Hirano, G., Yamamoto, M. & Mohri, A., 2002, IEEE International Conference on Intelligent Robots and Systems. Vol. 3. p. 2855-2860 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manipulators
End effectors

Study on formation of films by a spray deposition method for the organic thin film solar cells

Murata, M., Doi, T., Kurokawa, S., Ohnishi, O., Uneda, M., Iwahashi, T., Miyake, K., Miyachi, K. & Kobayashi, Y., 2011, Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Coatings
Butyric acid
Discharge (fluid mechanics)
Atmospheric humidity
Esters

Study on innovative plasma fusion CMP and its application to processing of diamond substrate

Nishizawa, H., Oyama, K., Doi, T. K., Aida, H., Kim, S., Sano, Y., Kurokawa, S. & Wan, C., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7412031. (2015 International Conference on Planarization/CMP Technology, ICPT 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diamond
Chemical mechanical polishing
Diamonds
Fusion reactions
Plasmas
2 Citations (Scopus)

Study on Joule-Thomson micro-cooler

Naganuma, K., Takata, Y., Kubota, H. & Takahashi, K., Sep 29 2004, Proceedings of the Second International Conference on Microchannels and Minichannels (ICMM2004). Kandlikar, S. G., Celata, G. P., Nishio, S., Stephan, P. & Thonon, B. (eds.). p. 769-772 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Refrigerants
Capillary tubes
Evaporators
Silicones
Etching

Study on the noise and vibration of engine block coupled with the rotating crankshaft and the gear train; effect of the torsional vibration of crankshaft

Ohta, K., Ikeda, K. & Futae, T., 2013, 20th International Congress on Sound and Vibration 2013, ICSV 2013. International Institute of Acoustics and Vibrations, Vol. 4. p. 3297-3304 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

torsional vibration
engines
pulleys
vibration
engine noise

Study the heat transfer process from electron-phonon nonequilibrium in thin gold film to glass substrate through transient thermoreflectance measurements

Ma, W., Wang, H., Zhang, X. & Wang, W., Dec 1 2010, ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010. PARTS A AND B ed. p. 625-632 8 p. (ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010; no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gold
Heat transfer
Glass
Borosilicate glass
Electrons
1 Citation (Scopus)

Submicron-scale condensation on hydrophobic and hydrophilic surfaces

Yamada, Y., Ikuta, T., Nishiyama, T., Takahashi, K. & Takata, Y., Jan 1 2013, Safety, Reliability and Risk; Virtual Podium (Posters). American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 15).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condensation
Amorphous carbon
Graphite
Graphene
Heat transfer coefficients
141 Citations (Scopus)

SUEFUL-7: A 7DOF upper-limb exoskeleton robot with muscle-model-oriented EMG-based control

Gopura, R. A. R. C., Kiguchi, K. & Yi, Y., Dec 11 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2009. p. 1126-1131 6 p. 5353935. (2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromyography
Muscle
Robots
Robotics
Controllers
9 Citations (Scopus)

Sulfur poisoning of SOFCs: Dependence on operational parameters

Yoshizumi, T., Uryu, C., Oshima, T., Shiratori, Y., Ito, K. & Sasaki, K., Dec 1 2011, Solid Oxide Fuel Cells 12, SOFC XII. 2 PART 2 ed. p. 1717-1725 9 p. (ECS Transactions; vol. 35, no. 2 PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Sulfur
Degradation
Reforming reactions
Chemisorption
2 Citations (Scopus)

Superior lubricity in articular cartilage and artificial hydrogel cartilage

Murakami, T., Yarimitsu, S., Nakashima, K., Yamaguchi, T., Sawae, Y., Sakai, N. & Suzuki, A., 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 3. p. 2303-2306 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogel
Cartilage
Hydrogels

Suppression of secondary flows in an axial flow turbine rotor with a novel blade design concept

Yamada, K., Furukawa, M., Shibata, T., Nakakido, S. & Oka, N., Jan 1 2014, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cambers
Axial flow
Secondary flow
Turbomachine blades
Turbines

Surface activated flip-chip bonding of laser chips

Higurashi, E., Suga, T., Nakagawa, M. & Sawada, R., 2005, Proceedings of the ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems: Advances in Electronic Packaging 2005. Vol. PART A. p. 793-796 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lasers
Surface emitting lasers
Plasmas
Substrates
Shear strength

Surface film formation and hydrogen permeation of austenitic stainless steel under high pressure hydrogen

Tanaka, H., Sawae, Y. & Sugimura, J., Dec 1 2011, ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. p. 261-263 3 p. (American Society of Mechanical Engineers, Tribology Division, TRIB).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Permeation
Hydrogen
Steel
Stainless Steel
1 Citation (Scopus)

Surface wettability and subcooling on nucleate pool boiling heat transfer

Suroto, B. J., Kohno, M. & Takata, Y., Feb 9 2018, 1st International Conference and Exhibition on Powder Technology Indonesia, ICePTi 2017. Joni, I. M. & Panatarani, C. (eds.). American Institute of Physics Inc., 030047. (AIP Conference Proceedings; vol. 1927).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

wettability
boiling
heat transfer
heat flux
copper
3 Citations (Scopus)

Surface wettability effects in heat and fluid flow

Takata, Y., 2006, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006. Vol. 2006 B. p. 1333-1341 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wetting
Flow of fluids
Heat transfer
Boiling liquids
Contact angle

Synchronous observation with friction measurement prior to and during occurrence of scuffing

Yagi, K., Sugimura, J., Kajita, S., Ohmori, T. & Suzuki, A., Dec 1 2010, STLE/ASME 2010 International Joint Tribology Conference, IJTC2010. p. 361-363 3 p. (American Society of Mechanical Engineers, Tribology Division, TRIB).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction
Aluminum Oxide
Steel
Point contacts
Plastic flow

Synthesis of single walled carbon nanotubes by laser vaporized catalytic chemical vapor deposition technique

Yamamoto, S., Onaka, Y., Suzuki, S., Maruyama, S., Tani, K., Takata, Y., Shibuta, Y. & Kohno, M., Dec 1 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. Vol. 2. p. 387-393 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Single-walled carbon nanotubes (SWCN)
Chemical vapor deposition
carbon nanotubes
vapor deposition
Lasers
2 Citations (Scopus)

Task based motion intention prediction with EEG signals

Bandara, D. S. V., Arata, J. & Kigichi, K., Oct 11 2017, IRIS 2016 - 2016 IEEE 4th International Symposium on Robotics and Intelligent Sensors: Empowering Robots with Smart Sensors. Institute of Electrical and Electronics Engineers Inc., p. 57-60 4 p. (IRIS 2016 - 2016 IEEE 4th International Symposium on Robotics and Intelligent Sensors: Empowering Robots with Smart Sensors).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

electroencephalography
Electroencephalography
Motion
Prediction
predictions
3 Citations (Scopus)

Task estimation of upper-limb using EEG and EMG signals

Kiguchi, K. & Hayashi, Y., Jan 1 2014, AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 548-553 6 p. 6878135. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Robots
Electrodes
2 Citations (Scopus)

Task-oriented perception-assist for an upper-limb power-assist exoskeleton robot

Kiguchi, K., Kose, Y. & Hayashi, Y., Dec 1 2010, 2010 World Automation Congress, WAC 2010. 5665314. (2010 World Automation Congress, WAC 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Patient rehabilitation
Robots
Experiments
Exoskeleton (Robotics)

Temperature dependence of fatigue crack growth in low-alloy steel under gaseous hydrogen

Takakuwa, O., Yoshikawa, M., Matsuoka, S., Yamabe, J., Okazaki, S. & Matsunaga, H., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
High strength steel
Hydrogen
Temperature
Binding energy
7 Citations (Scopus)

Temperature measurement in through-plane direction in PEFC with a fabricated in-line thermocouple and supporter

Lee, S. K., Ito, K. & Sasaki, K., Dec 1 2009, ECS Transactions - Proton Exchange Membrane Fuel Cells 9. 1 PART 1 ed. p. 495-503 9 p. (ECS Transactions; vol. 25, no. 1 PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermocouples
Temperature measurement
Fuel cells
Electrolytes
Polymers
3 Citations (Scopus)

Tensile-and fatigue-properties of low alloy steel JIS-SCM435 and carbon steel JIS-SM490B in 115 MPA hydrogen gas

Matsunaga, H., Yoshikawa, M., Itoga, H., Yamabe, J., Hamada, S. & Matsuoka, S., Jan 1 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
Carbon steel
Fatigue of materials
Hydrogen
Gases
1 Citation (Scopus)

TENSION AND BENDING OF A SEMI-ELLIPTICAL SURFACE CRACK.

Isida, M. & Noguchi, H., 1983, Unknown Host Publication Title. Sih, G. C., Ryan, N. E. & Jones, R. (eds.). Martinus Nijhoff Publ, p. 189-192 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cracks
Boundary layers
Stress intensity factors
Boundary conditions

The application of micro laser Doppler velocimeter to hemodialysis

Yoshinaga, K., Nakashima, F., Nogami, H. & Sawada, R., Nov 19 2017, 22nd Microoptics Conference, MOC 2017. Institute of Electrical and Electronics Engineers Inc., p. 232-233 2 p. (22nd Microoptics Conference, MOC 2017; vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser doppler velocimeters
Laser Doppler velocimeters
blood flow
Flow velocity
Blood
41 Citations (Scopus)

The behavior of tip clearance flow at near-stall condition in a transonic axial compressor rotor

Yamada, K., Funazaki, K. & Furukawa, M., Sep 25 2007, Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air. Vol. 6 PART A. p. 295-306 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Vortex flow
Shock waves
Flow fields

The CHF enhancement combining nano-fluid and honeycomb porous plate in a saturated pool boiling

Mori, S., Aznam, S. M. & Okuyama, K., Jan 1 2014, Thermal Hydraulics. American Society of Mechanical Engineers (ASME), (International Conference on Nuclear Engineering, Proceedings, ICONE; vol. 2A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Porous plates
Boiling liquids
Fluids
Nanoparticles
Large scale systems

The cooperative effects of protein and lipid on wear behavior of ultra-high molecular weight polyethylene

Sawae, Y. & Murakami, T., 2005, Proceedings of the World Tribology Congress III - 2005. p. 663-664 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrahigh molecular weight polyethylenes
Lipids
Wear of materials
Proteins
Lubricants
1 Citation (Scopus)

The decrease of tensile strength for the notched specimens in the hydrogen gas

Itoga, H., Suzuki, Y. & Noguchi, H., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. p. 1304-1311 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tensile strength
Hydrogen
Gases
Crack initiation
Thermal desorption
5 Citations (Scopus)

The development of a new joint mechanism based on human shoulder morphology

Sakai, N., Sawae, Y. & Murakami, T., Dec 22 2006, Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006. p. 982-987 6 p. 1639219. (Proceedings of the First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006, BioRob 2006; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wire
Muscle
Neural networks
Inverse kinematics
Feedback control

The effect of prestrain on fatigue property of precipitation strengthening stainless steel SUH660

Wu, H., Hamada, S. & Noguchi, H., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless steel
Fatigue of materials
Crack propagation
Crack initiation
Precipitates

The effect of the laser beam wavelength and pulse width on micro grooving: Comparison of nanosecond and femtosecond laser

Nonaka, S., Mori, T., Takata, Y. & Kohno, M., 2012, ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012. p. 275-280 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrashort pulses
Laser beams
Laser pulses
Machining
Wavelength
3 Citations (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 735-743 9 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Compressors
Vortex flow
Flow rate
Flow structure

The effect of working parameters upon the electrical permittivity of grease lubricants in EHD contacts

Nagata, Y., Sugimura, J. & Glovnea, R., 2009, World Tribology Congress 2009 - Proceedings. p. 742 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrohydrodynamics
Lubricating greases
Lubricants
Permittivity
Oils

The effects of grain size and pore size on the high cycle fatigue behavior of injection molded Ti-6Al-4V compacts

Kudo, K., Shinagawa, K. & Miura, H., Jan 1 2018, Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018. Metal Powder Industries Federation, p. 243-252 10 p. (Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grain size and shape
vanadium alloys
Vanadium alloys
Metal molding
metal powder