Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
Conference contribution
3 Citations (Scopus)

Recognizing object surface properties using impedance perception

Kikuuwe, R. & Yoshikawa, T., Jan 1 2003, MHS 2003 - Proceedings of 2003 International Symposium on Micromechatronics and Human Science. Institute of Electrical and Electronics Engineers Inc., p. 251-258 8 p. 1249944. (MHS 2003 - Proceedings of 2003 International Symposium on Micromechatronics and Human Science).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Surface Properties
Electric Impedance
Surface properties
Stiffness matrix
Robots
3 Citations (Scopus)

RECONSIDERATION OF MACROSCOPIC LOW CYCLE FATIGUE LAWS THROUGH OBSERVATION OF MICROSCOPIC FATIGUE PROCESS ON A MEDIUM CARBON STEEL.

Harada, S., Murakami, Y., Fukushima, Y. & Endo, T., Dec 1 1987, ASTM Special Technical Publication. Solomon, H. D., Halford, G. R., Kaisand, L. P. & Leis, B. N. (eds.). ASTM, p. 1181-1198 18 p. (ASTM Special Technical Publication).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Microcracks
Carbon steel
Fatigue of materials
Miners
Fatigue damage

Recovery in 15%Cr ferritic stainless steel after large strain deformation

Belyakov, A., Tsuzaki, K., Kimura, Y. & Mishima, Y., Dec 1 2007, Recrystallization and Grain Growth III - Proceedings of the Third International Conference on Recrystallization and Grain Growth, ReX and GG III. PART 1 ed. p. 119-124 6 p. (Materials Science Forum; vol. 558-559, no. PART 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

ferritic stainless steels
Stainless Steel
Ferritic steel
Stainless steel
recovery

Reduction in thermal conductivity of bulk silicon processed by high-pressure torsion

Kohno, M., Sivasankaran, H., Tabara, M., Ikoma, Y. & Horita, Z., Jan 2016, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2015). p. 7-8

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

5 Citations (Scopus)

Relating microstructure to surface exchange kinetics using in situ optical absorption relaxation

Chen, T., Harrington, G. F., Sasaki, K. & Perry, N. H., Jan 1 2016, Electrosynthesis of Fuels 4. Xu, H., Brisard, G., Zhou, X-D., Flake, J., Staser, J., Gur, T., Mogensen, M. & Mustain, W. (eds.). 43 ed. Electrochemical Society Inc., p. 23-31 9 p. (ECS Transactions; vol. 75, no. 43).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Light absorption
Microstructure
Kinetics
Oxygen
Growth temperature

Relation between fatigue crack initiation and structure in pearlitic steel

Fujisawa, T., Sasaki, D., Hamada, S. & Noguchi, H., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Crack initiation
Crystal structure
Steel
Fatigue of materials
Pearlite

Relationship between dynamic stress field and ECM production in regenerated cartilage tissue

Fukuda, K., Shigyo, Y., Ariura, H., Omata, S., Morita, T., Yamaguchi, T. & Sawae, Y., Jan 18 2017, 2016 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2016. Institute of Electrical and Electronics Engineers Inc., 7824183

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

cartilage
Cartilage
stress distribution
Extracellular Matrix
Tissue
3 Citations (Scopus)

Relationship between electrochemical properties and electrolyte partial conductivities of proton-conducting ceramic fuel cells

Matsuzaki, Y., Tachikawa, Y., Somekawa, T., Sato, K., Kawabata, Y., Sugahara, M., Matsumoto, H., Taniguchi, S. & Sasaki, K., May 30 2017, ECS Transactions. Kawada, T. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 441-450 10 p. (ECS Transactions; vol. 78, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Electrochemical properties
Fuel cells
Protons
Electrolytes
Leakage currents
2 Citations (Scopus)

Relationship between temperature distribution in EHL film and dimple formation

Yagi, K., Kyogoku, K. & Nakahara, T., Dec 1 2004, Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004. PART A ed. p. 459-468 10 p. (Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004; no. PART A).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Elastohydrodynamic lubrication
Temperature distribution
Film thickness
Interferometry
Sapphire
4 Citations (Scopus)

Reliability problem prevention method for automotive components - Development of GD3 activity and DRBFM (Design Review Based on Failure Mode)-

Shimizu, H., Imagawa, T. & Noguchi, H., Dec 1 2003, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Failure modes
Systems analysis
Fault tree analysis
Innovation
15 Citations (Scopus)

Research program of a super fast reactor

Oka, Y., Ishiwatari, Y., Liu, J., Terai, T., Nagasaki, S., Muroya, Y., Abe, H., Mori, H., Akiba, M., Akimoto, H., Okumura, K., Akasaka, N. & Goto, S., Dec 1 2006, Proceedings of the 2006 International Congress on Advances in Nuclear Power Plants, ICAPP'06. Vol. 2006. p. 344-350 7 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Fast reactors
Water cooled reactors
Water
Hydraulics
Heat transfer

Robotic-investigators for microorganisms in a microfluidic chip

Sugita, M., Kawahara, T., Hagiwara, M., Yamanishi, Y. & Arai, F., May 7 2012, 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems, MEMS 2012. p. 1177-1180 4 p. 6170373. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

microorganisms
robotics
Microfluidics
Microorganisms
Robotics
5 Citations (Scopus)

Robotic tele-surgery through the Internet - System development and its feasibility tests

Arata, J., Mitsuishi, M. & Hashizume, M., Jan 1 2014, 2014 11th International Conference on Ubiquitous Robots and Ambient Intelligence, URAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 11-12 2 p. 7057511. (2014 11th International Conference on Ubiquitous Robots and Ambient Intelligence, URAI 2014).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Surgery
Robotics
Internet
Experiments
2 Citations (Scopus)

Robust manipulation for temporary lack of sensory information by a multi-fingered hand-arm system

Kawamura, A., Tahara, K., Kurazume, R. & Hasegawa, T., Dec 29 2011, IROS'11 - 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems: Celebrating 50 Years of Robotics. p. 4201-4206 6 p. 6048102. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Computer simulation
2 Citations (Scopus)

Robust visual servoing for object manipulation with large time-delays of visual information

Kawamura, A., Tahara, K., Kurazume, R. & Hasegawa, T., Dec 1 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2012. p. 4797-4803 7 p. 6385589. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Visual servoing
Time delay
Data communication systems
Image processing
Sampling
1 Citation (Scopus)

Rolling contact fatigue of bearing steel in hydrogen environment

Tanaka, H., Sugimura, J., Hashimoto, M. & Yamamoto, Y., Dec 1 2005, Proceedings of the World Tribology Congress III - 2005. p. 155-156 2 p. (Proceedings of the World Tribology Congress III - 2005).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Bearings (structural)
Fatigue of materials
Hydrogen
Steel

Rolling contact fatigue test with greases in hydrogen environment

Tanaka, H., Ikeda, S., Hashimoto, M. & Sugimura, J., Jan 1 2013, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), p. 1150-1153 4 p. (5th World Tribology Congress, WTC 2013; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Lubricating greases
Hydrogen
Fatigue of materials
Bearings (structural)
Hydrocarbons
1 Citation (Scopus)

Safe automatic emergency stop control of gantry crane including moving obstacles in its workspace

Yamamoto, M., Honda, E. & Mohri, A., Dec 1 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation. p. 253-258 6 p. 1570128. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2005).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Gantry cranes
Cranes
Collision avoidance
Experiments

Safety protection control for a wind-hydrogen autonomous system based on the switching control

Yu, G., Okada, N. & Kiguchi, K., Dec 1 2012, 2012 IEEE/SICE International Symposium on System Integration, SII 2012. p. 853-858 6 p. 6427306. (2012 IEEE/SICE International Symposium on System Integration, SII 2012).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Hydrogen
Security systems
Wind power
Mathematical models
Control systems
3 Citations (Scopus)

Scanning angle control of the optical micro scanner actuated by electrostatic force

Ishikawa, N., Ikeda, K., Okazaki, K. & Sawada, R., Oct 14 2014, 2014 International Conference on Optical MEMS and Nanophotonics, OMN 2014 - Proceedings. IEEE Computer Society, p. 121-122 2 p. 6924550. (International Conference on Optical MEMS and Nanophotonics).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Electrostatic force
Scanning
Temperature
Electrodes
Electric potential

Scanning measurement and evaluation of gear tooth root and bottom profiles

Kurokawa, S., Kido, H., Taguchi, T., Okada, T., Ohnishi, O. & Doi, T., Sep 20 2011, Advances in Power Transmission Science and Technology. p. 838-841 4 p. (Applied Mechanics and Materials; vol. 86).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Gear teeth
Gears
Scanning
Fatigue of materials

Scanning measurement of step height and freeform surface by using optically trapped microsphere

Michihata, M., Takaya, Y., Washitani, T. & Hayashi, T., Jan 1 2012, Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012. Shore, P., Spaan, H. & Burke, T. (eds.). euspen, p. 64-67 4 p. (Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012; vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Microspheres
Scanning
scanning
probes
profiles
4 Citations (Scopus)

Segmentation method of human manipulation task based on measurement of force imposed by a human hand on a grasped object

Matsuo, K., Murakami, K., Hasegawa, T., Tahara, K. & Kurazume, R., Dec 11 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2009. p. 1767-1772 6 p. 5354069. (2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2009).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Point contacts
End effectors
Experiments
1 Citation (Scopus)

Segmented electrode analysis of an anode-supported planar solid oxide fuel cell for the diagnosis of marine power applications

Nakajima, H., Kitahara, T. & Tsuda, E., May 30 2017, ECS Transactions. Kawada, T. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 2109-2113 5 p. (ECS Transactions; vol. 78, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Solid oxide fuel cells (SOFC)
Anodes
Electrodes
Channel flow
Oxidants
12 Citations (Scopus)

Self-sensing three-pole magnetic bearing using a Kalman filter

Matsuda, K., Kijimoto, S. & Kanemitsu, Y., 2006, 2006 SICE-ICASE International Joint Conference. p. 1590-1594 5 p. 4109221

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Magnetic bearings
Kalman filters
Poles
Low pass filters
Cutoff frequency

Semiconductor device cleaning with liquid aerosol nozzle using rotary atomizer method

Seike, Y., Miyachi, K., Kurokawa, S., Ohnishi, O. & Doi, T., Dec 1 2010, Advanced Metallization Conference 2010. p. 296-297 2 p. (Advanced Metallization Conference (AMC)).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Atomizers
Semiconductor devices
Aerosols
Cleaning
Nozzles
1 Citation (Scopus)

Semiglobally strictly passive two-port network representation of rigid link manipulator under PID trajectory-tracking control

Kikuuwe, R., Dec 1 2010, 2010 49th IEEE Conference on Decision and Control, CDC 2010. p. 3529-3535 7 p. 5717792

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Trajectory Tracking
Tracking Control
Manipulator
Manipulators
Strictly

Sensibility to muscular arrangement of feedforward position control for non-pulley-musculoskeletal system

Kino, H., Kikuchi, S., Matsutani, Y. & Tahara, K., Aug 12 2013, Information Technology Convergence: Security, Robotics, Automations and Communication. p. 827-833 7 p. (Lecture Notes in Electrical Engineering; vol. 253 LNEE).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Musculoskeletal system
Feedforward control
Position control
Muscle
Redundancy
3 Citations (Scopus)

Sensory feedback attitude control for a grasped object by a multi-fingered hand-arm system

Kawamura, A., Tahara, K., Kurazume, R. & Hasegawa, T., 2010, 2010 IEEE International Conference on Robotics and Biomimetics, ROBIO 2010. p. 1542-1548 7 p. 5723559

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Sensory feedback
Sensory Feedback
Attitude control
Feedback control
Arm
9 Citations (Scopus)

Sensory-motor control of a muscle redundant arm for reaching movements - Convergence analysis and gravity compensation

Tahara, K., Luo, Z. W., Arimoto, S. & Kino, H., Dec 1 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. p. 2870-2875 6 p. 1545411. (2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Muscle
Gravitation
Compensation and Redress
Computer simulation
Invariance

Separation and characterization of overpotentials in electrochemical hydrogen pump with a reference electrode

Hao, Y., Nakajima, H., Inada, A., Sasaki, K. & Ito, K., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 1155-1163 9 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Anodes
Cathodes
Pumps
Hydrogen
Electrodes

Short and long length-scale disturbances leading to rotating stall in an axial compressor stage with different stator/rotor gaps

Inoue, M., Kuroumaru, M., Yoshida, S. & Furukawa, M., Jan 1 2001, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Stators
Compressors
Rotors
Wavelength
Wavelet transforms

SiC-CMP characteristics under high pressure gas atmospheres using manganese slurry

Hasegawa, T., Doi, T. K., Kurokawa, S., Ohnishi, O., Kawase, Y., Yamaguchi, Y. & Kishii, S., Dec 1 2010, Advanced Metallization Conference 2010. p. 161-162 2 p. (Advanced Metallization Conference (AMC)).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Cytidine Monophosphate
Manganese
Gases
Manganese oxide
Slurries
3 Citations (Scopus)

Similarity law of air-water two-phase flow performance of centrifugal pump

Matsushita, N., Watanabe, S., Okuma, K., Hasui, T. & Furukawa, A., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 915-920 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

centrifugal pumps
Centrifugal pumps
two phase flow
Two phase flow
blades

Simple and simultaneous measurement of five-degrees-of-freedom error motions for a micro high-speed spindle

Murakami, H., Katsuki, A., Sajima, T. & Nakayama, N., Jan 1 2012, Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012. Spaan, H., Burke, T. & Shore, P. (eds.). euspen, p. 46-49 4 p. (Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

spindles
Lenses
degrees of freedom
high speed
balls
1 Citation (Scopus)

Simple models in trajectory planning of human-like reaching movements

Svinin, M. M., Yamamoto, M. & Goncharenko, I., Dec 1 2010, IEEE/RSJ 2010 International Conference on Intelligent Robots and Systems, IROS 2010 - Conference Proceedings. p. 1662-1667 6 p. 5651234. (IEEE/RSJ 2010 International Conference on Intelligent Robots and Systems, IROS 2010 - Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Trajectories
Planning
Boundary conditions
5 Citations (Scopus)

Simple orientation control of an object by regrasping using a dual-arm manipulator with multi-fingered hands

Kawamura, A., Tahara, K., Kurazume, R. & Hasegawa, T., 2009, 2009 International Conference on Advanced Robotics, ICAR 2009. 5174819

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Manipulators
Sensors
Computer simulation
10 Citations (Scopus)

Simulation of deformation of layered sheet during micro powder imprinting process

Tsumori, F., Xu, Y., Kang, H., Osada, T. & Miura, H., Dec 1 2013, Computational Plasticity XII: Fundamentals and Applications - Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013. p. 1267-1273 7 p. (Computational Plasticity XII: Fundamentals and Applications - Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Powders
Binders
Powder metallurgy
Interfaces (computer)
Polymers
10 Citations (Scopus)

Simulation of fine gain tuning using genetic algorithms for model-based robotic servo controllers

Nagata, F., Kuribayashi, K., Kiguchi, K. & Watanabe, K., Oct 9 2007, Proceedings of the 2007 IEEE International Symposium on Computational Intelligence in Robotics and Automation, CIRA 2007. p. 196-201 6 p. 4269914. (Proceedings of the 2007 IEEE International Symposium on Computational Intelligence in Robotics and Automation, CIRA 2007).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Robotics
Tuning
Genetic algorithms
Controllers
Manipulators
1 Citation (Scopus)

Simulation of gas transportation in radial shaft seal with model surfaces

Mizuta, H., Nakaoka, S., Sato, Y. & Sugimura, J., Dec 1 2010, STLE/ASME 2010 International Joint Tribology Conference, IJTC2010. p. 255-257 3 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Seals
Gases
Lubricants
Axial flow
Flow of gases

Simulation of powder behavior based on discrete model taking account of surface effect of particles

Tsumori, F., Hayakawa, K. & Shima, S., Dec 1 2005, Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII. PART 1 ed. p. 591-594 4 p. (Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII; no. PART 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Surface Effects
Discrete Model
Powder
Adhesion
Powders

Simulation of speech production by concentrated mass model

Sugiki, S., Ishikawa, S., Kijimoto, S. & Koba, Y., 2013, 42nd International Congress and Exposition on Noise Control Engineering 2013, INTER-NOISE 2013: Noise Control for Quality of Life. OAL-Osterreichischer Arbeitsring fur Larmbekampfung, Vol. 4. p. 3327-3334 8 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

acoustics
simulation
larynx
waveforms
dampers
2 Citations (Scopus)

Simultaneous ablation and injection by electrically-induced mono-dispersed bubble knife for biomedical applications

Kuriki, H., Yamanishi, Y., Sakuma, S., Akagi, S. & Arai, F., Apr 2 2013, IEEE 26th International Conference on Micro Electro Mechanical Systems, MEMS 2013. p. 209-212 4 p. 6474214. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Ablation
ablation
bubbles
injection
Ultrasonics
2 Citations (Scopus)

Simultaneous measurement of a blood flow and a contact pressure

Inoue, R., Nogami, H., Higurashi, E. & Sawada, R., Jan 1 2018, BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018. Gamboa, H., Bermudez i Badia, S., Saggio, G. & Fred, A. (eds.). SciTePress, p. 48-53 6 p. (BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; vol. 4).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Blood
Sensors
Flow measurement
Skin
Temperature

Simultaneous molding and low-temperature bonding of Au microstructures for fabrication of micromirrors on non-silicon substrates

Matsuoka, S., Higurashi, E., Suga, T. & Sawada, R., Sep 13 2016, 2016 International Conference on Optical MEMS and Nanophotonics, OMN 2016 - Proceedings. IEEE Computer Society, Vol. 2016-September. 7565926

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Molding
Fabrication
Glass
Microstructure
Substrates
3 Citations (Scopus)

Simultaneous optimization of rotor blade and wind-lens for aerodynamic design of wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Kawamitsu, K., Kido, K. & Oka, A., Jan 1 2014, ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 3B).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Turbomachine blades
Lenses
Aerodynamics
Turbines
Rotors

Single cell surgery with monodispersed microbubbles generated by a pulsed discharge of microelectric knife

Kuriki, H., Yamanishi, Y., Sakuma, S., Akagi, S. & Arai, F., Jan 1 2012, Proceedings of the 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012. Chemical and Biological Microsystems Society, p. 183-185 3 p. (Proceedings of the 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Microelectrodes
Surgery
Electric discharges
Glass
Ablation
1 Citation (Scopus)

Single live-bacterial cell assay of promoter activity and regulation

Teramoto, J., Hasegawa, A., Shohata, E., Kori, A., Magdy, E. S. H., Nakajima, M., Lin, Y. C., Yamanishi, Y., Magariyama, Y., Arai, F., Fukuda, T. & Ishihama, A., Dec 1 2008, 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics". p. 301-306 6 p. 4752467. (2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Escherichia coli
Assays
Gelation

Single live-bacterial cell assay of promoter activity and regulation: Escherichia coli gcl promoter

Teramoto, J., Yamanishi, Y., Magdy, E. S. H., Hasegawa, A., Nakajima, M., Shimada, T., Arai, F., Fukuda, T. & Ishihama, A., Dec 1 2009, 20th Anniversary MHS 2009 and Micro-Nano Global COE - 2009 International Symposium on Micro-NanoMechatronics and Human Science. p. 255-258 4 p. 5351949. (20th Anniversary MHS 2009 and Micro-Nano Global COE - 2009 International Symposium on Micro-NanoMechatronics and Human Science).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Escherichia coli
Assays
Gelation
37 Citations (Scopus)

Single Si crystal 1024 ch MEMS mirror based on terraced electrodes and a high-aspect ratio torsion spring for 3-D cross-connect switch

Sawada, R., Yamaguchi, J., Higurashi, E., Shimizu, A., Yamamoto, T., Takeuchi, N. & Uenishi, Y., Jan 1 2002, 2002 IEEE/LEOS International Conference on Optical MEMs, OMEMS 2002 - Conference Digest. Institute of Electrical and Electronics Engineers Inc., p. 11-12 2 p. 1031419. (2002 IEEE/LEOS International Conference on Optical MEMs, OMEMS 2002 - Conference Digest).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Torsional stress
MEMS
Aspect ratio
Mirrors
Switches