Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
2017
6 Citations (Scopus)

Nonlinear dynamics of twisted and coiled polymer actuator made of conductive nylon based on the energy balance

Masuya, K., Ono, S., Takagi, K. & Tahara, K., Aug 21 2017, 2017 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2017. Institute of Electrical and Electronics Engineers Inc., p. 779-784 6 p. 8014112. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Energy balance
Actuators
Polymers
Joule heating
Curve fitting

Numerical study of effects of operation condition for oxygen blown coal gasifier in oxy-fuel IGCC

Tanno, K., Seongyool, A. & Watanabe, H., Jan 1 2017, Boilers and Heat Recovery Steam Generator; Combustion Turbines; Energy Water Sustainability; Fuels, Combustion and Material Handling; Heat Exchangers, Condensers, Cooling Systems, and Balance-of-Plant. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Power Division (Publication) POWER; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Coal gasification
Combustors
Coal
Oxygen
Gasification
1 Citation (Scopus)

Optimum aerodynamic design of centrifugal compressor impeller using an inverse method based on meridional viscous flow analysis

Oka, N., Furukawa, M., Yamada, K., Itou, S., Ibaraki, S., Iwakiri, K. & Hayashi, Y., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Viscous flow
Aerodynamics
Flow fields
Flow separation
1 Citation (Scopus)

Photochemical preparation of Pt electrocatalysts on Sn0 2 support for PEFCs

Nagamine, M., Noda, Z., Matsumoto, S., Matsuda, J., Hayashi, A. & Sasaki, K., Jan 1 2017, ECS Transactions. Shirvanian, P. A., Ramani, V., Kim, Y-T., Gasteiger, H. A., Shinohara, K., Ayers, K. E., Pivovar, B. S., Jones, D. J., Uchida, H., Perry, K. A., Mitsushima, S., Xu, H., Schmidt, T. J., Fenton, J. M., Fuller, T. F., Strasser, P., Buechi, F., Swider-Lyons, K. E., Mantz, R. A., Narayan, S., Pintauro, P. N., Coutanceau, C. & Weber, A. Z. (eds.). 8 ed. Electrochemical Society Inc., p. 773-780 8 p. (ECS Transactions; vol. 80, no. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Catalyst supports
Durability
Oxides
Irradiation
11 Citations (Scopus)

Position control of twisted and coiled polymer actuator using a controlled fan for cooling

Takagi, K., Arakawa, T., Takeda, J., Masuya, K., Tahara, K. & Asaka, K., Jan 1 2017, Electroactive Polymer Actuators and Devices (EAPAD) 2017. Bar-Cohen, Y. (ed.). SPIE, 101632V. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10163).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Position Control
Position control
fans
Fans
Cooling
1 Citation (Scopus)

Recent progress on interpretation of tensile ductility loss for various austenitic stainless steels with external and internal hydrogen

Takakuwa, O., Yamabe, J., Matsunaga, H., Furuya, Y. & Matsuoka, S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Ductility
Hydrogen
Steel
Stainless steel

Relationship between dynamic stress field and ECM production in regenerated cartilage tissue

Fukuda, K., Shigyo, Y., Ariura, H., Omata, S., Morita, T., Yamaguchi, T. & Sawae, Y., Jan 18 2017, 2016 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2016. Institute of Electrical and Electronics Engineers Inc., 7824183

Research output: Chapter in Book/Report/Conference proceedingConference contribution

cartilage
Cartilage
stress distribution
Extracellular Matrix
Tissue
1 Citation (Scopus)

Relationship between electrochemical properties and electrolyte partial conductivities of proton-conducting ceramic fuel cells

Matsuzaki, Y., Tachikawa, Y., Somekawa, T., Sato, K., Kawabata, Y., Sugahara, M., Matsumoto, H., Taniguchi, S. & Sasaki, K., May 30 2017, ECS Transactions. Kawada, T. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 441-450 10 p. (ECS Transactions; vol. 78, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrochemical properties
Fuel cells
Protons
Electrolytes
Leakage currents

Segmented electrode analysis of an anode-supported planar solid oxide fuel cell for the diagnosis of marine power applications

Nakajima, H., Kitahara, T. & Tsuda, E., May 30 2017, ECS Transactions. Kawada, T. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., p. 2109-2113 5 p. (ECS Transactions; vol. 78, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Anodes
Electrodes
Channel flow
Oxidants
2 Citations (Scopus)

SnO2-supported electrocatalysts on various conductive fillers for PEFCs

Nakazato, Y., Kawachino, D., Noda, Z., Matsuda, J., Hayashi, A. & Sasaki, K., Jan 1 2017, ECS Transactions. Shirvanian, P. A., Ramani, V., Kim, Y-T., Gasteiger, H. A., Shinohara, K., Ayers, K. E., Pivovar, B. S., Jones, D. J., Uchida, H., Perry, K. A., Mitsushima, S., Xu, H., Schmidt, T. J., Fenton, J. M., Fuller, T. F., Strasser, P., Buechi, F., Swider-Lyons, K. E., Mantz, R. A., Narayan, S., Pintauro, P. N., Coutanceau, C. & Weber, A. Z. (eds.). 8 ed. Electrochemical Society Inc., p. 897-906 10 p. (ECS Transactions; vol. 80, no. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Carbon black
Fillers
Fuel cells
Cathodes
1 Citation (Scopus)

Stable simulation of flexible cable-like objects by using serial kinematic chains with high number of passive degrees-of-freedom

Cisneros, R., Kikuuwe, R., Nakaoka, S. & Kanehiro, F., Feb 22 2017, 2016 IEEE International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2016. Institute of Electrical and Electronics Engineers Inc., p. 119-126 8 p. 7862385

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Degrees of freedom (mechanics)
Kinematics
Cables
Friction
Hose

Stiffness evaluation of a tendon-driven robot with variable joint stiffness mechanisms

Matsutani, Y., Tahara, K., Kino, H. & Ochi, H., Dec 22 2017, 2017 IEEE-RAS 17th International Conference on Humanoid Robotics, Humanoids 2017. IEEE Computer Society, Vol. Part F134101. p. 213-218 6 p. (IEEE-RAS International Conference on Humanoid Robots).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tendons
Stiffness
Robots
Wire
2 Citations (Scopus)

Task based motion intention prediction with EEG signals

Bandara, D. S. V., Arata, J. & Kigichi, K., Oct 11 2017, IRIS 2016 - 2016 IEEE 4th International Symposium on Robotics and Intelligent Sensors: Empowering Robots with Smart Sensors. Institute of Electrical and Electronics Engineers Inc., p. 57-60 4 p. (IRIS 2016 - 2016 IEEE 4th International Symposium on Robotics and Intelligent Sensors: Empowering Robots with Smart Sensors).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

electroencephalography
Electroencephalography
Motion
Prediction
predictions

The application of micro laser Doppler velocimeter to hemodialysis

Yoshinaga, K., Nakashima, F., Nogami, H. & Sawada, R., Nov 19 2017, 22nd Microoptics Conference, MOC 2017. Institute of Electrical and Electronics Engineers Inc., p. 232-233 2 p. (22nd Microoptics Conference, MOC 2017; vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser doppler velocimeters
Laser Doppler velocimeters
blood flow
Flow velocity
Blood
1 Citation (Scopus)

Ti-porous-sheet-supported Pt electrocatalysts for PEFCs

Kawachino, D., Noda, Z., Matsuda, J., Hayashi, A. & Sasaki, K., Jan 1 2017, ECS Transactions. Shirvanian, P. A., Ramani, V., Kim, Y-T., Gasteiger, H. A., Shinohara, K., Ayers, K. E., Pivovar, B. S., Jones, D. J., Uchida, H., Perry, K. A., Mitsushima, S., Xu, H., Schmidt, T. J., Fenton, J. M., Fuller, T. F., Strasser, P., Buechi, F., Swider-Lyons, K. E., Mantz, R. A., Narayan, S., Pintauro, P. N., Coutanceau, C. & Weber, A. Z. (eds.). 8 ed. Electrochemical Society Inc., p. 781-787 7 p. (ECS Transactions; vol. 80, no. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Fuel cells
Diffusion in gases
Electrolytes
Catalyst supports
1 Citation (Scopus)

Vortical flow structure of hub-corner separation in a stator cascade of a multi-stage transonic axial compressor

Saito, S., Furukawa, M., Yamada, K., Tamura, Y., Matsuoka, A. & Niwa, N., 2017, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery. American Society of Mechanical Engineers (ASME), Vol. 1A-2017.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow structure
Stators
Compressors
Vortex flow
Flow fields

Width-dependent thermal conductivity of suspended single-layer graphene

Takamatsu, H., Wang, H. & Xing, Z., Mar 2017, 1st Asian Conference on Thermal Science (ACTS 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Active reduction of the two-way diffraction from a noise barrier by using feedforward control

Wang, X., Satake, T., Koba, Y., Ishikawa, S. & Kijimoto, S., Aug 21 2016, Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future. German Acoustical Society (DEGA), p. 576-586 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

feedforward control
loudspeakers
diffraction
acoustics
directivity
2 Citations (Scopus)

An FIB-SEM study on correlations between PEFC electrocatalyst microstructure and cell performance

Okumura, M., Noda, Z., Matsuda, J., Nishihara, M., Hayashi, A. & Sasaki, K., 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. 14 ed. Electrochemical Society Inc., Vol. 75. p. 347-354 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Focused ion beams
Fuel cells
Electrolytes
Microstructure
1 Citation (Scopus)

Backstepping trajectory tracking control for a spherical rolling robot

Bai, Y., Svinin, M. M. & Yamamoto, M., Nov 28 2016, IROS 2016 - 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-November. p. 298-303 6 p. 7759070

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Backstepping
Pendulums
Trajectories
Robots
Controllers

Brownian diffusion analysis for nano-abrasives in CMP slurry by using fluorescence polarization method

Hayashi, T., Toshiki, S. & Kurokawa, S., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7411985

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Abrasives
Fluorescence
Polarization
Particle size analysis
3 Citations (Scopus)

Catalytic and electrochemical behaviour of solid oxide fuel cell operated with simulated-biogas mixtures

Dang-Long, T., Quang-Tuyen, T. & Shiratori, Y., Jun 3 2016, Proceedings of the 3rd AUN/SEED-NET Regional Conference on Energy Engineering and the 7th International Conference on Thermofluids, RCEnE/THERMOFLUID 2015. American Institute of Physics Inc., Vol. 1737. 060012

Research output: Chapter in Book/Report/Conference proceedingConference contribution

solid oxide fuel cells
anodes
greenhouse effect
fuel flow
heat engines

Control the deformation of MIM parts by the powder size distribution

Osada, T., Kudo, K., Hashikawa, R., Tsumori, F. & Miura, H., Jan 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Powders

Coupled analysis of two-dimensional acoustic and membrane vibration by concentrated mass model

Ishikawa, S., Kijimoto, S., Ataru, M. & Yuta, A., Jan 1 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sound waves
Vibrations (mechanical)
Acoustics
membranes
Membranes

Damage behavior of micro segregation in Al-Si alloy by use of phase contrast imaging

Yamada, R., Toda, H., Besel, Y., Uesugi, K. & Akihisa, T., Jan 1 2016, 72nd World Foundry Congress, WFC 2016. The WFO (The World Foundry Organization Ltd), p. 379-380 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Imaging techniques
Tomography
X rays
Processing
Synchrotrons
2 Citations (Scopus)

Design of 3D printer-like data interface for a robotic removable machining

Nagata, F., Yoshimoto, S., Kiguchi, K., Watanabe, K. & Habib, M. K., Jan 1 2016, Intelligent Robotics and Applications - 9th International Conference, ICIRA 2016, Proceedings. Springer Verlag, Vol. 9834 LNCS. p. 40-50 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9834 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Machining
Robotics
Computer aided manufacturing
Robots
1 Citation (Scopus)

Development of ITO-and FET-based cow rumen sensor for long-term pH value monitoring

Zhang, L., Lu, J., Okada, H., Nogami, H. & Itoh, T., Jul 15 2016, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2016. Mita, Y., Rencz, M., Charlot, B., Schneider, P., Tas, N., Nouet, P. & Pressecq, F. (eds.). Institute of Electrical and Electronics Engineers Inc., 7514846

Research output: Chapter in Book/Report/Conference proceedingConference contribution

pH sensors
Field effect transistors
Tin oxides
Indium
Monitoring

Development of MEAs by controlling carbon structures in cathode layers

Fu, B., Minamida, Y., Noda, Z., Sasaki, K. & Hayashi, A., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. 14 ed. Electrochemical Society Inc., Vol. 75. p. 827-835 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon nanofibers
Cathodes
Carbon
Porosity
Durability

Direct numerical simulation of turbulent flow and aeroacoustic fields around an airfoil using lattice boltzmann method

Kusano, K., Yamada, K., Furukawa, M. & Moon, K. J., Jan 1 2016, Symposia: Turbomachinery Flow Simulation and Optimization; Applications in CFD; Bio-Inspired and Bio-Medical Fluid Mechanics; CFD Verification and Validation; Development and Applications of Immersed Boundary Methods; DNS, LES and Hybrid RANS/LES Methods; Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Active Fluid Dynamics and Flow Control - Theory, Experiments and Implementation. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aeroacoustics
Direct numerical simulation
Airfoils
Turbulent flow
Boundary layers

Effect of grain size on the fatigue properties of injection moulded Ti-6Al-4V compacts

Kudo, K., Ishimitsu, H., Choe, J., Osada, T., Miura, H. & Shinagawa, K., Jan 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Metal molding
Injection molding
Powders
Boron

Effect of nanohole defect on the thermal conductivity of free-standing single-layer graphene

Takamatsu, H., Wang, H., Kurata, K., Fukunaga, T., Takahashi, K. & Xing, Z., Oct 2016, 11th Asian Thermophysical Properties Conference (ATPC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Effect of test frequency on hydrogen-enhanced fatigue crack growth in type 304 stainless steel and ductile cast iron

Matsunaga, H., Nakashima, T., Yamada, K., Matsuo, T., Yamabe, J. & Matsuoka, S., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Cast iron
Stainless steel
Hydrogen
Crack tips
1 Citation (Scopus)

Evaluation of local relative slip in a narrow space in hydrogen gas using MEMS optical encoder

Morita, N., Komoda, R., Nakashima, F., Kubota, M., Higurashi, E. & Sawada, R., Sep 13 2016, 2016 International Conference on Optical MEMS and Nanophotonics, OMN 2016 - Proceedings. IEEE Computer Society, 7565861. (International Conference on Optical MEMS and Nanophotonics; vol. 2016-September).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MOEMS
Hydrogen
Gases
Sensors
Mechanical properties

Fabrication of probe tips for nanoscale 3D metrology

Uchiyama, K., Murakami, H., Katsuki, A., Sajima, T., Yamamoto, T., Nagata, R. & Fujiyoshi, K., Jan 1 2016, Proceedings - 32nd ASPE Annual Meeting. American Society for Precision Engineering, ASPE, p. 305-310 6 p. (Proceedings - 32nd ASPE Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

probe
Fabrication
metrology
1 Citation (Scopus)

Fall stimulation method based on differential velocity of split belt treadmill

Nakashima, Y., Yamamoto, M. & Fukui, T., Oct 4 2016, 2016 World Automation Congress, WAC 2016. IEEE Computer Society, 7582950. (World Automation Congress Proceedings; vol. 2016-October).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Exercise equipment
Recovery
Nursing
Muscle
Bone
2 Citations (Scopus)

Fast forward dynamics simulation of robot manipulators with highly frictional gears

Wakisaka, N., Kikuuwe, R. & Sugihara, T., Jun 8 2016, 2016 IEEE International Conference on Robotics and Automation, ICRA 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-June. p. 2096-2101 6 p. 7487358

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manipulators
Gears
Torque
Robots
Internal friction
1 Citation (Scopus)

Fatigue life properties and anomalous macroscopic fatigue fracture surfaces of low carbon steel JIS-SM490B in high-pressure hydrogen gas environment

Ogawa, Y., Matsunaga, H., Yoshikawa, M., Yamabe, J. & Matsuoka, S., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low carbon steel
Fatigue of materials
Hydrogen
Gases
Air

Feasibility of using micro-beam sensor for gas detection size effect on heat conduction to gases

Takamatsu, H., Wang, H., Hisada, K., Kurata, K. & Fukunaga, T., Mar 2016, 1st Pacific Rim Thermal Engineering Conference (PRTEC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Frictional behavior of (PEI/GO)x solid lubricant coatings on steel substrates in various environments

Saravanan, P., Selyanchyn, R., Tanaka, H., Fujikawa, S. & Sugimura, J., 2016, Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2016. Society of Tribologists and Lubrication Engineers, p. 543-548 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

solid lubricants
Solid lubricants
Polyetherimides
Steel
steels
1 Citation (Scopus)

Gas crossover suppression by controlling wettability of cathode current collector

Ito, K., Sakaguchi, T., Tsuchiya, Y., Inada, A., Nakajima, H. & Saito, R., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 1107-1112 6 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wetting
Cathodes
Electrolysis
Gases
Electrolytes
2 Citations (Scopus)

Gas diffusion layer coated with a microporous layer containing hydrophilic CNTs to enhance PEFC performance without humidification using anode gas recirculation

Kitahara, T., Nakajima, H. & Ishikawa, K., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 209-217 9 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Anodes
Atmospheric humidity
Gases
Membranes

Geometrie conditions for feedforward positioning of musculoskeletal tendon-driven structure

Ochi, H., Kino, H., Tahara, K. & Matsutani, Y., Jan 25 2016, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers Inc., p. 1109-1114 6 p. 7392248

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tendons
Muscle
Sensory feedback
Manipulators
Bone

Impedance spectra associated with metal deposition at the negative electrode from contaminating metal particles at the positive electrode in a lithium ion battery

Nakajima, H., Inada, A., Kitahara, T. & Nagata, Y., Jan 1 2016, Failure Mode and Mechanism Analyses. 23 ed. Electrochemical Society Inc., Vol. 75. p. 27-36 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrodes
Metals
Dissolution
Electrochemical impedance spectroscopy
Electrodeposition
4 Citations (Scopus)

In-situ analysis of the in-plane current distributions in an electrolyte-supported planar solid oxide fuel cell by segmented electrodes

Ochiai, T., Nakajima, H., Karimata, T., Kitahara, T., Ito, K., Ogura, Y. & Shimano, J., Jan 1 2016, General Student Poster Session. Pharkaya, P., Sugimoto, W., Yoon, W-S., Chaitanya, V., Sundaram, K., Suroviec, A. H. & Subramanian, V. (eds.). 52 ed. Electrochemical Society Inc., p. 91-98 8 p. (ECS Transactions; vol. 75, no. 52).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Electrolytes
Channel flow
Separators
Electrodes

Investigation of electrical resistivities of nanograined Si produced by high-pressure torsion

Chon, B., Ikoma, Y., Kohno, M., Shimoi, J. & Horita, Z., Oct 2016, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2016). p. 53-54

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of problems at the PEFC cathode layer under higher temperature operation

Miyamoto, H., Kitamura, M., Noda, Z., Sasaki, K. & Hayashi, A., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 329-337 9 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High temperature operations
Cathodes
Proton conductivity
Membranes
Degradation

Irreversible electroporation: Medical application of intense electric pulses for sustainable health

Kurata, K. & Takamatsu, H., Mar 29 2016, Sustainable Energy and Advanced Materials: Proceeding of the 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015. American Institute of Physics Inc., Vol. 1717. 4943424

Research output: Chapter in Book/Report/Conference proceedingConference contribution

electric pulses
health
electrodes
therapy
Joule heating
2 Citations (Scopus)

Jumping motion control planning for 4-wheeled robot with a tail

Iwamoto, N. & Yamamoto, M., Feb 10 2016, 2015 IEEE/SICE International Symposium on System Integration, SII 2015. Institute of Electrical and Electronics Engineers Inc., p. 871-876 6 p. 7405114

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion control
Robots
Planning
Animals
Antennas
2 Citations (Scopus)

Large-scale des analysis of stall inception process in a multi-stage axial flow compressor

Yamada, K., Furukawa, M., Tamura, Y., Saito, S., Matsuoka, A. & Nakayama, K., Jan 1 2016, Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 2D-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial-flow compressors
Compressors
Stators
Gas turbines
Unsteady flow

Locally global active noise control based on wavefront synthesis

Wang, X., Koba, Y., Ishikawa, S. & Kijimoto, S., 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Active noise control
Wavefronts
Control systems
synthesis
Acoustic noise