Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
2016
4 Citations (Scopus)

In-situ analysis of the in-plane current distributions in an electrolyte-supported planar solid oxide fuel cell by segmented electrodes

Ochiai, T., Nakajima, H., Karimata, T., Kitahara, T., Ito, K., Ogura, Y. & Shimano, J., Jan 1 2016, General Student Poster Session. Pharkaya, P., Sugimoto, W., Yoon, W-S., Chaitanya, V., Sundaram, K., Suroviec, A. H. & Subramanian, V. (eds.). 52 ed. Electrochemical Society Inc., p. 91-98 8 p. (ECS Transactions; vol. 75, no. 52).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Electrolytes
Channel flow
Separators
Electrodes

Investigation of electrical resistivities of nanograined Si produced by high-pressure torsion

Chon, B., Ikoma, Y., Kohno, M., Shimoi, J. & Horita, Z., Oct 2016, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2016). p. 53-54

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of problems at the PEFC cathode layer under higher temperature operation

Miyamoto, H., Kitamura, M., Noda, Z., Sasaki, K. & Hayashi, A., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 329-337 9 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High temperature operations
Cathodes
Proton conductivity
Membranes
Degradation

Irreversible electroporation: Medical application of intense electric pulses for sustainable health

Kurata, K. & Takamatsu, H., Mar 29 2016, Sustainable Energy and Advanced Materials: Proceeding of the 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015. American Institute of Physics Inc., Vol. 1717. 4943424

Research output: Chapter in Book/Report/Conference proceedingConference contribution

electric pulses
health
electrodes
therapy
Joule heating
2 Citations (Scopus)

Jumping motion control planning for 4-wheeled robot with a tail

Iwamoto, N. & Yamamoto, M., Feb 10 2016, 2015 IEEE/SICE International Symposium on System Integration, SII 2015. Institute of Electrical and Electronics Engineers Inc., p. 871-876 6 p. 7405114

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion control
Robots
Planning
Animals
Antennas
2 Citations (Scopus)

Large-scale des analysis of stall inception process in a multi-stage axial flow compressor

Yamada, K., Furukawa, M., Tamura, Y., Saito, S., Matsuoka, A. & Nakayama, K., Jan 1 2016, Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 2D-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial-flow compressors
Compressors
Stators
Gas turbines
Unsteady flow

Locally global active noise control based on wavefront synthesis

Wang, X., Koba, Y., Ishikawa, S. & Kijimoto, S., 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Active noise control
Wavefronts
Control systems
synthesis
Acoustic noise

Mathematical Modeling and Motion Analysis of the Wheel Based Ball Retaining Mechanism

Kimura, K., Ishii, K., Takemura, Y. & Yamamoto, M., Dec 28 2016, Proceedings - 2016 Joint 8th International Conference on Soft Computing and Intelligent Systems and 2016 17th International Symposium on Advanced Intelligent Systems, SCIS-ISIS 2016. Institute of Electrical and Electronics Engineers Inc., p. 518-523 6 p. 7801702. (Proceedings - 2016 Joint 8th International Conference on Soft Computing and Intelligent Systems and 2016 17th International Symposium on Advanced Intelligent Systems, SCIS-ISIS 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion Analysis
Mathematical Modeling
Wheel
Wheels
Ball
1 Citation (Scopus)

Measurement of equilibrium adsorption and adsorption/desorption rate of water vapor to a silica gel thin film coated on a cross fin tube heat exchanger

Hamamoto, Y., Ouchi, T. & Mori, H., 2016, ACRA 2016 - 8th Asian Conference on Refrigeration and Air-Conditioning. Asian Conference on Refrigeration and Air Conditioning (ACRA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

tube heat exchangers
Tubes (components)
Silica gel
silica gel
fins
1 Citation (Scopus)

Mechanism of hydrogen-assisted surface crack growth of austenitic stainless steels in slow Strain rate Tensile test

Matsuoka, S., Yamabe, J. & Matsunaga, H., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Strain rate
Crack propagation
Hydrogen
Cracks
1 Citation (Scopus)

Modeling of human-like reaching movements in the manipulation of parallel flexible objects

Svinin, M. M., Goncharenko, I., Lee, H. & Yamamoto, M., Nov 28 2016, IROS 2016 - 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc., p. 4830-4835 6 p. 7759709. (IEEE International Conference on Intelligent Robots and Systems; vol. 2016-November).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Trajectories
Virtual reality
Natural frequencies
Simulators
Polynomials
2 Citations (Scopus)

Motion planning for a hoop-pendulum type of underactuated systems

Bai, Y., Svinin, M. M. & Yamamoto, M., Jun 8 2016, 2016 IEEE International Conference on Robotics and Automation, ICRA 2016. Institute of Electrical and Electronics Engineers Inc., p. 2739-2744 6 p. 7487436. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2016-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pendulums
Motion planning
Controllers
Feedback
Motion control
1 Citation (Scopus)

Optimization of annealing catalyst powder for high temperature PEMWE

Li, H., Nakajima, H. & Ito, K., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 1095-1105 11 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrolytes
Annealing
Membranes
Powders
Catalysts

Optimization of machining conditions of basic-type CMP/P-CVM fusion processing using SiC substrate

Sano, Y., Shiozawa, K., Doi, T., Kurokawa, S., Aida, H., Oyama, K., Miyashita, T., Sumizawa, H. & Yamauchi, K., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7412032

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Machining
Fusion reactions
Polishing
Substrates
2 Citations (Scopus)

PEFC alloy electrocatalysts supported on SnO2: A study on the preparation method

Matsumoto, S., Iwami, M., Noda, Z., Matsuda, J., Hayashi, A. & Sasaki, K., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 851-858 8 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Alloying
Durability
Agglomeration
Heat treatment
3 Citations (Scopus)

Perception-Assist with a Lower-Limb Power-Assist Robot for Sitting Motion

Kiguchi, K. & Yokomine, Y., Jan 12 2016, Proceedings - 2015 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2015. Institute of Electrical and Electronics Engineers Inc., p. 2390-2394 5 p. 7379550. (Proceedings - 2015 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Accidents
Robot
Experiments
Interaction
35 Citations (Scopus)

Position control of fishing line artificial muscles (coiled polymer actuators) from nylon thread

Arakawa, T., Takagi, K., Tahara, K. & Asaka, K., Jan 1 2016, Electroactive Polymer Actuators and Devices (EAPAD) 2016. Vidal, F. & Bar-Cohen, Y. (eds.). SPIE, 97982W. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9798).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

fishing
Artificial muscle
Position Control
Nylon (trademark)
threads

Prediction of liner cavitation occurrence considering the vibro-acoustic characteristics of engine structure and water coolant passage

Ohta, K., Wang, X. Y., Saeki, A. & Yoshida, D., Jan 1 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations, (ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

water pressure
coolants
linings
cavitation flow
Cavitation
1 Citation (Scopus)

Preparation of iridium/SnO2/VGCF electrocatalysts for water electrolysis

Anai, H., Matsuda, J., Noda, Z., Tachikawa, Y., Hayashi, A., Ito, K. & Sasaki, K., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., Vol. 75. p. 1129-1135 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Iridium
Electrolysis
Carbon fibers
Vapors

Preventing hydrogen diffusion in stainless steel by cavitating jet in air

Takakuwa, O. & Soyama, H., Jan 1 2016, 23rd International Conference on Water Jetting 2016. BHR Group Limited, p. 215-221 7 p. (23rd International Conference on Water Jetting 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless steel
Hydrogen
Hydrogen embrittlement
Air
Austenitic stainless steel
1 Citation (Scopus)

Proposal of cleanliness evaluation method of CMP pad, and investigation of cleaning effect by the high-pressure jet

Kitamura, M., Kurokawa, S., Tokumoto, Y., Hayashi, T., Hiyama, H., Wada, Y. & Takatoh, C., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7411952. (2015 International Conference on Planarization/CMP Technology, ICPT 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Cleaning
Debris
Surface properties

Real- Time evaluation of tool wear detection system under wet machining based on electrical contact resistance

Gouarir, A., Kurokawa, S., Sajima, T. & Murata, M., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Contact resistance
contact resistance
machining
Machining
Wear of materials

Reduction in thermal conductivity of bulk silicon processed by high-pressure torsion

Kohno, M., Sivasankaran, H., Tabara, M., Ikoma, Y. & Horita, Z., Jan 2016, Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2015). p. 7-8

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Relating microstructure to surface exchange kinetics using in situ optical absorption relaxation

Chen, T., Harrington, G. F., Sasaki, K. & Perry, N. H., Jan 1 2016, Electrosynthesis of Fuels 4. Xu, H., Brisard, G., Zhou, X-D., Flake, J., Staser, J., Gur, T., Mogensen, M. & Mustain, W. (eds.). 43 ed. Electrochemical Society Inc., p. 23-31 9 p. (ECS Transactions; vol. 75, no. 43).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Light absorption
Microstructure
Kinetics
Oxygen
Growth temperature

Separation and characterization of overpotentials in electrochemical hydrogen pump with a reference electrode

Hao, Y., Nakajima, H., Inada, A., Sasaki, K. & Ito, K., Jan 1 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. Jones, D. J., Buchi, F. N., Pivovar, B. S., Fuller, T. F., Weber, A. Z., Zhuang, L., Coutanceau, C., Pintauro, P. N., Ayers, K. E., Ramani, V. K., Strasser, P., Mantz, R. A., Narayanan, S. R., Mitsushima, S., Schmidt, T. J., Sun, S. G., Uchida, H., Gasteiger, H. A., Swider-Lyons, K., Fenton, J. M., Kim, Y. T., Perry, K. A., Shirvanian, P. & Shinohara, K. (eds.). 14 ed. Electrochemical Society Inc., p. 1155-1163 9 p. (ECS Transactions; vol. 75, no. 14).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Anodes
Cathodes
Pumps
Hydrogen
Electrodes

Simultaneous molding and low-temperature bonding of Au microstructures for fabrication of micromirrors on non-silicon substrates

Matsuoka, S., Higurashi, E., Suga, T. & Sawada, R., Sep 13 2016, 2016 International Conference on Optical MEMS and Nanophotonics, OMN 2016 - Proceedings. IEEE Computer Society, Vol. 2016-September. 7565926

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Molding
Fabrication
Glass
Microstructure
Substrates
2 Citations (Scopus)

SnO2-supported electrocatalysts on conductive fillers for PEFCs

Nakazato, Y., Iwami, M., Okumura, M., Nod, Z., Hayashi, A. & Sasaki, K., 2016, Polymer Electrolyte Fuel Cells 16, PEFC 16. 14 ed. Electrochemical Society Inc., Vol. 75. p. 841-849 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Catalyst supports
Fillers
Fuel cells
Electrolytes
2 Citations (Scopus)

Split-belt controllable treadmill with differential velocity-based fall stimulation and motion analysis

Nakashima, Y., Noutsuka, H., Fukui, T. & Yamamoto, M., Oct 13 2016, 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-October. p. 3354-3357 4 p. 7591446

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Accidental Falls
Exercise equipment
Nursing
Muscle
Bone
1 Citation (Scopus)

Stable MEMS electrostatic comb-driven scanning mirror via feedback of comb electrostatic capacitance

Ishikawa, N., Okazaki, K., Kudo, A. & Sawada, R., Sep 13 2016, 2016 International Conference on Optical MEMS and Nanophotonics, OMN 2016 - Proceedings. IEEE Computer Society, Vol. 2016-September. 7565866

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MEMS
Electrostatics
Mirrors
Capacitance
Scanning

Study on innovative plasma fusion CMP and its application to processing of diamond substrate

Nishizawa, H., Oyama, K., Doi, T. K., Aida, H., Kim, S., Sano, Y., Kurokawa, S. & Wan, C., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7412031. (2015 International Conference on Planarization/CMP Technology, ICPT 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diamond
Chemical mechanical polishing
Diamonds
Fusion reactions
Plasmas

Thermal conductivity of ultrananocrystalline diamond/hydrogenated amorphous carbon composite films prepared by coaxial arc plasma deposition

Takeichi, S., Nishiyama, T., Tabara, M., Kawawaki, S., Kohno, M., Takahashi, K. & Yoshitake, T., Jan 1 2016, Carbon Nanostructures: From Fundamental Studies to Applications and Devices. Weisman, R. B., Atanassov, P. B., Imahori, H. & Rotkin, S. V. (eds.). 25 ed. Electrochemical Society Inc., p. 27-32 6 p. (ECS Transactions; vol. 75, no. 25).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plasma deposition
Carbon films
Amorphous carbon
Composite films
Diamonds
1 Citation (Scopus)

Variable combination of feed-forward and feedback manners for set-point control of a musculoskeletal arm considering the maximum exertable muscular force

Tahara, K., Matsutani, Y., Nakagawa, D., Sato, M. & Kino, H., Dec 21 2016, Proceedings of the IECON 2016 - 42nd Annual Conference of the Industrial Electronics Society. IEEE Computer Society, p. 815-820 6 p. 7793411. (IECON Proceedings (Industrial Electronics Conference)).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Musculoskeletal system
Feedback
Controllers
Time delay
Computer simulation
2015
4 Citations (Scopus)

Acceleration feedback and friction compensation for improving positioning performance in systems with friction

Aung, M. T. S. & Kikuuwe, R., Jul 28 2015, ACC 2015 - 2015 American Control Conference. Institute of Electrical and Electronics Engineers Inc., p. 4798-4803 6 p. 7172085. (Proceedings of the American Control Conference; vol. 2015-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction
Feedback
Controllers
Position control
Derivatives
3 Citations (Scopus)

Acceleration feedback and friction compensation for improving the stability of admittance control

Aung, M. T. S. & Kikuuwe, R., Sep 8 2015, 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World, ASCC 2015. Selamat, H., Ramli, H. R. H., Faudzi, A. A. M., Rahman, R. Z. A., Ishak, A. J., Soh, A. C. & Ahmad, S. A. (eds.). Institute of Electrical and Electronics Engineers Inc., 7244611

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Position control
Friction
Feedback
Controllers
Acceleration measurement

Aerodynamic performances and flow fields of pareto optimal solutions in an aerodynamic design of a wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Oka, A. & Kurokawa, Y., Jan 1 2015, Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lenses
Flow fields
Aerodynamics
Turbines
Wind turbines
2 Citations (Scopus)

A FIB-SEM study on correlations between PEFC electrocatalyst microstructure and cell performance

Okumura, M., Nagamatsu, Y., Noda, Z., Tachikawa, Y., Daio, T., Hayashi, A. & Sasaki, K., 2015, Polymer Electrolyte Fuel Cells 15, PEFC 15. 17 ed. Electrochemical Society Inc., Vol. 69. p. 709-714 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Focused ion beams
Microstructure
Scanning electron microscopy
Ionomers
2 Citations (Scopus)

A micro laser Doppler velocimeter designed for a wafer-level packaging process

Morita, N., Akiyama, T., Nogami, H., Hayashida, Y., Higurashi, E., Ito, T. & Sawada, R., Aug 5 2015, 2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS 2015. Institute of Electrical and Electronics Engineers Inc., p. 480-483 4 p. 7180965

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser doppler velocimeters
Laser Doppler velocimeters
packaging
Packaging
wafers
2 Citations (Scopus)

An identification procedure for rate-dependent friction laws of robotic manipulator with limited motion range

Iwatani, M. & Kikuuwe, R., Sep 8 2015, 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World, ASCC 2015. Selamat, H., Ramli, H. R. H., Faudzi, A. A. M., Rahman, R. Z. A., Ishak, A. J., Soh, A. C. & Ahmad, S. A. (eds.). Institute of Electrical and Electronics Engineers Inc., 7244818

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manipulators
Identification (control systems)
Robotics
Friction
Curve fitting

A parametric study of SOFC performances with multi-stage electrochemical oxidation for enhancement of electric efficiency

Matsuzaki, Y., Tachikawa, Y., Hatae, T., Matsumoto, H., Taniguchi, S. & Sasaki, K., 2015, Solid Oxide Fuel Cells 14, SOFC 2015. 1 ed. Electrochemical Society Inc., Vol. 68. p. 1961-1968 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrochemical oxidation
Solid oxide fuel cells (SOFC)
High temperature operations
Gas fuels
Conversion efficiency

Application of a MEMS blood flowmeter for power spectrum analysis of heart rate variability

Akiyama, T., Miyazaki, T., Ito, H., Nogami, H. & Sawada, R., 2015, BIOSIGNALS 2015 - 8th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 8th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2015. SciTePress, p. 211-218 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flowmeters
Power spectrum
Spectrum analysis
MEMS
Blood
6 Citations (Scopus)

A study of features of EEG signals during upper-limb motion

Hayashi, Y. & Kiguchi, K., Aug 25 2015, AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 943-946 4 p. 7222660. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2015-August).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Robots
Muscle
Torque
2 Citations (Scopus)

Basic study on etching selectivity of plasma chemical vaporization machining by introducing crystallographic damage into work surface

Sano, Y., Doi, T., Kurokawa, S., Aida, H., Ohnishi, O., Uneda, M., Okada, Y., Nishikawa, H. & Yamauchi, K., Jan 1 2015, Precision Engineering and Nanotechnology V. Trans Tech Publications Ltd, p. 550-553 4 p. (Key Engineering Materials; vol. 625).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vaporization
Etching
Machining
Plasmas
Plasma etching
1 Citation (Scopus)

Contact pressure measurement device with a laser micro-displacement sensor

Hayashida, Y., Harisaki, K., Takeshita, T., Morita, N., Ando, H., Higurashi, E., Nogami, H. & Sawada, R., Oct 2 2015, OMN 2015 Jerusalem - 2015 International Conference on Optical MEMS and Nanophotonics, Proceedings. IEEE Computer Society, Vol. 02-05-August-2015. 7288842

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pressure measurement
Contact sensors
Lasers
Sensors
Optical sensors

Development of 3D printer with integrated temperature control system

Mir-Nasiri, N., Ali, M. H. & Kurokawa, S., Nov 20 2015, 2015 4th International Conference on Informatics, Electronics and Vision, ICIEV 2015. Institute of Electrical and Electronics Engineers Inc., 7333996. (2015 4th International Conference on Informatics, Electronics and Vision, ICIEV 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Integrated control
Temperature control
Conceptual design
Control systems

Development of a laser-guided deep small-sized hole-measurement system: Measurement accuracy

Katsuki, A., Sajima, T., Murakami, H., Hazrat, A. M., Ohnishi, O. & Akashi, K., 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. euspen, p. 201-202 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lasers
lasers
Units of measurement
Measurement errors
Optical systems
1 Citation (Scopus)

Development of basic-type CMP/P-CVM fusion processing system (Type A) and its fundamental characteristics

Shiozawa, K., Sano, Y., Kurokawa, S., Miyashita, T., Sumizawa, H., Doi, T., Aida, H., Oyama, K. & Yamauchi, K., Jan 20 2015, ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014. Institute of Electrical and Electronics Engineers Inc., p. 275-278 4 p. 7017298. (ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical mechanical polishing
Vaporization
Machining
Fusion reactions
Plasmas

Development of gait training system to encourage swinging the upper limbs based on the phase change of the shoulder horizontal rotation at heel contact

Nakashima, Y., Kawano, S., Matumoto, Y., Kobayashi, Y., Fujie, M. G. & Yamamoto, M., Aug 25 2015, AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., Vol. 2015-August. p. 933-936 4 p. 7222658

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manipulators
Exercise equipment
Experiments
Trajectories
1 Citation (Scopus)

Development of indoor hybrid active noise barrier

Wang, X., Koba, Y., Ishikawa, S. & Kijimoto, S., Jan 1 2015, 22nd International Congress on Sound and Vibration, ICSV 2015. International Institute of Acoustics and Vibrations, (22nd International Congress on Sound and Vibration, ICSV 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sound fields
noise reduction
anechoic chambers
augmentation
configurations
4 Citations (Scopus)

Development of robust SOFC anode materials using la-doped SrTiO3

Shen, X. & Sasaki, K., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (eds.). 1 ed. Electrochemical Society Inc., Vol. 68. p. 1447-1453 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Anodes
Electrochemical properties
Impregnation
Cathodes
1 Citation (Scopus)

Diagnosis method to detect the incorporation of metallic particles in a lithium ion battery

Nakajima, H. & Kitahara, T., 2015, Batteries. 2 ed. Electrochemical Society Inc., Vol. 68. p. 59-74 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dissolution
Metals
Electrodes
Electrochemical impedance spectroscopy
Electrodeposition