Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
2014

Assessment of deformation behavior of polycrystalline aluminum using diffraction-amalgamated grain-boundary tracking (DAGT) technique

Toda, H., Kamiko, T., Uesugi, K., Takeuchi, A., Suzuki, Y. & Kobayashi, M., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 57-62 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
Grain boundaries
grain boundaries
Diffraction
aluminum
1 Citation (Scopus)

A study on motion modification force in perception-assist for a lower-limb power-assist exoskeleton

Kiguchi, K., Komori, A. & Kouno, T., Feb 18 2014, 2014 Joint 7th International Conference on Soft Computing and Intelligent Systems, SCIS 2014 and 15th International Symposium on Advanced Intelligent Systems, ISIS 2014. Institute of Electrical and Electronics Engineers Inc., p. 1233-1237 5 p. 7044884

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Energy efficiency
Robots

Complete coverage motion control using gradually building map

Iwamoto, N. & Yamamoto, M., Jan 1 2014, 2014 13th International Conference on Control Automation Robotics and Vision, ICARCV 2014. Institute of Electrical and Electronics Engineers Inc., p. 1917-1922 6 p. 7064609

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion control
Robots
2 Citations (Scopus)

Coupled analysis of two-dimensional acoustic and membrane vibration by concentrated mass model

Ishikawa, S., Kijimoto, S., Owaki, R. & Matsuo, A., Jan 1 2014, INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control. Davy, J., Burgess, M., Don, C., Dowsett, L., McMinn, T. & Broner, N. (eds.). Australian Acoustical Society, (INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sound waves
membranes
vibration
stiffness matrix
acoustics
2 Citations (Scopus)

Defective nitrogen-doped graphene foam: A non-precious electrocatalyst for the oxygen reduction reaction in alkaline medium

Liu, J., Sasaki, K. & Lyth, S. M., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Shinohara, K., Narayanan, S. R., Swider-Lyons, K., Weber, A., Coutanceau, C., Mantz, R., Gasteiger, H. A., Jones, D., Edmundson, M., Mitsushima, S., Ramani, V., Meas, Y., Fuller, T., Uchida, H., Buchi, F. N., Perry, K. A., Schmidt, T. J., Fenton, J. M. & Strasser, P. (eds.). 3 ed. Electrochemical Society Inc., p. 1161-1172 12 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Graphene
Foams
Nitrogen
Oxygen

Defective nitrogen-doped graphene foam: Clarifying the role of nitrogen in non-precious ORR catalysts

Liu, J., Daio, T., Sasaki, K. & Lyth, S. M., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Shinohara, K., Narayanan, S. R., Swider-Lyons, K., Weber, A., Coutanceau, C., Mantz, R., Gasteiger, H. A., Jones, D., Edmundson, M., Mitsushima, S., Ramani, V., Meas, Y., Fuller, T., Uchida, H., Buchi, F. N., Perry, K. A., Schmidt, T. J., Fenton, J. M. & Strasser, P. (eds.). 3 ed. Electrochemical Society Inc., p. 271-280 10 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Graphene
Foams
Nitrogen
Catalysts
2 Citations (Scopus)

Design and fabrication of driving microcoil with large tilt-angle for medical scanner application

Sun, B., Sawada, R., Yang, Z., Zhang, Y., Itoh, T. & Maeda, R., Mar 9 2014, DTIP 2014 - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. Institute of Electrical and Electronics Engineers Inc., 7056688. (DTIP 2014 - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical fibers
Scanning
Fabrication
Endoscopy
Wet etching

Development of a filtering algorithm to demodulate electromyogram signal of essential tremor patients

Matsumoto, Y., Nakashima, Y., Seki, M., Ando, T., Kobayashi, Y., Fujie, M. G., Iijima, H. & Nagaoka, M., Oct 24 2014, World Automation Congress Proceedings. IEEE Computer Society, p. 567-572 6 p. 6936047. (World Automation Congress Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Signal processing
Processing

Development of a system for 3-D micro metrology using an ultra-small-diameter optical fiber probe-optical analysis and evaluative experiment using the 0.4 μm diameter stylus shaft

Murakami, H., Katsuki, A., Sajima, T., Tokuoh, N. & Fukuda, M., Jan 1 2014, Proceedings - ASPE 2014 Annual Meeting. American Society for Precision Engineering, ASPE, p. 63-66 4 p. (Proceedings - ASPE 2014 Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical fibers
Semiconductor lasers
Experiments
Wavelength
Microstructure
4 Citations (Scopus)

Development of a two-link planar manipulator with continuously variable transmission mechanism

Okada, T. & Tahara, K., 2014, AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 617-622 6 p. 6878147

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manipulators
Experiments

Development of cartilaginous tissue in chondrocyte-agarose construct cultured under traction loading

Keisuke, F., Seiji, O. & Sawae, Y., 2014, The 15th International Conference on Biomedical Engineering, ICBME 2013. Springer Verlag, Vol. 43. p. 263-266 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Glycosaminoglycans
Collagen
Sepharose
Collagen Type II
Tissue
4 Citations (Scopus)

Development of MEAs with Pt/mesoporous carbon as a cathode catalyst

Minamida, Y., Noda, Z., Hayashi, A. & Sasaki, K., 2014, Polymer Electrolyte Fuel Cells 14. 3 ed. Electrochemical Society Inc., Vol. 64. p. 137-144 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cathodes
Catalysts
Carbon
Durability
Electrocatalysts

Development of Ti-Al intermetallic alloy compacts by metal injection molding

Miura, H., Osada, T., Kanda, Y., Xu, Y., Tsumori, F. & Kubota, Y., Jan 1 2014, Advances in Powder Metallurgy and Particulate Materials - 2014, Proceedings of the 2014 World Congress on Powder Metallurgy and Particulate Materials, PM 2014. Metal Powder Industries Federation, p. 4134-4139 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
injection molding
Titanium
Injection molding
Intermetallics
2 Citations (Scopus)

EEG-based evaluation for perception-assist in upper-limb power-assist exoskeletons

Lalitharatne, T. D., Teramoto, K., Hayashi, Y., Tamura, K. & Kiguchi, K., Oct 24 2014, World Automation Congress Proceedings. IEEE Computer Society, p. 307-312 6 p. 6935909

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromyography
Electroencephalography
Bioelectric potentials
Brain
Experiments

Effect of hydrogen gas on the growth of small fatigue crack in JIS-SCM435

Itoga, H., Matsunaga, H. & Matsuoka, S., Jan 1 2014, 11th International Fatigue Congress. Trans Tech Publications, p. 942-947 6 p. (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Cracks
Hydrogen
Gases
Fatigue of materials
2 Citations (Scopus)

Effect of micro-voids on crack initiation and propagation in bending deformation of Al-Mg-Si alloy sheet

Yamamoto, Y., Asano, M., Yoshida, H., Kobayashi, M. & Toda, H., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 325-330 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

crack initiation
crack propagation
Crack initiation
voids
Crack propagation
1 Citation (Scopus)

Effect of orientation of small defects on fatigue limit of steels

Lorenzino, P., Okazaki, S., Matsunaga, H. & Murakami, Y., Jan 1 2014, FDMD II - JIP 2014 - Fatigue Design and Material Defects. EDP Sciences, 07001. (MATEC Web of Conferences; vol. 12).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Fatigue of materials
Defects
Cracks
2 Citations (Scopus)

Effect of synovial fluid constituents on tribological performance of artificial hydrogel cartilage material

Yarimitsu, S., Nakashima, K., Sawae, Y. & Murakami, T., 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 3. p. 2279-2282 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogel
Cartilage
Hydrogels
Fluids

Effects of bulk transport on surface friction of hydrogels

Yamaguchi, T. & Murakami, T., 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 3. p. 2287-2288 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogels
Friction
1 Citation (Scopus)

Electrochemical performance of MEAs with Pt/SnO2 mixed with conductive fillers

Nagamatsu, Y., Kanda, K., Noda, Z., Hayashi, A. & Sasaki, K., 2014, Polymer Electrolyte Fuel Cells 14. 3 ed. Electrochemical Society Inc., Vol. 64. p. 207-213 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Catalyst supports
Fillers
Ionomers
Electrocatalysts
Current voltage characteristics
5 Citations (Scopus)

Elution and wear of PVA hydrogels by reciprocating friction

Suzuki, A., Sasaki, S., Sasaki, S., Noh, T., Nakashima, K., Yarimitsu, S. & Murakami, T., Jan 1 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 3. p. 2283-2286 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogels
Wear of materials
Friction

Engineering approach to irreversible electroporation

Takamatsu, H. & Kurata, K., 2014, Proceedings of the 15th International Heat Transfer Conference, IHTC 2014. Begell House Inc.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

engineering
Tissue
Electrodes
electrodes
Tissue regeneration
1 Citation (Scopus)

Estimation of upper-limb motion in sagittal plane based on EEG signals

Hayashi, Y. & Kiguchi, K., Feb 18 2014, 2014 Joint 7th International Conference on Soft Computing and Intelligent Systems, SCIS 2014 and 15th International Symposium on Advanced Intelligent Systems, ISIS 2014. Institute of Electrical and Electronics Engineers Inc., p. 1229-1232 4 p. 7044865

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Robots
Signal processing
Experiments
2 Citations (Scopus)

Estimation of user's hand motion based on EMG and EEG signals

Kiguchi, K., Tamura, K. & Hayashi, Y., Oct 24 2014, World Automation Congress Proceedings. IEEE Computer Society, p. 713-717 5 p. 6936115. (World Automation Congress Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Robots
Brain
Experiments
11 Citations (Scopus)

Evaluation of perception-assist with an upper-limb power-assist exoskeleton using EMG and EEG signals

Lalitharatne, T. D., Teramoto, K., Hayashi, Y. & Kiguchi, K., 2014, Proceedings of the 11th IEEE International Conference on Networking, Sensing and Control, ICNSC 2014. IEEE Computer Society, p. 524-529 6 p. 6819681

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromyography
Electroencephalography
Robots
Exoskeleton (Robotics)
1 Citation (Scopus)

Evaluation of treadmill velocity control based on user's intention of acceleration or deceleration

Nakashima, Y., Ando, T., Kobayashi, Y. & Fujie, M. G., Oct 24 2014, World Automation Congress Proceedings. IEEE Computer Society, p. 555-560 6 p. 6936042. (World Automation Congress Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Velocity control
Exercise equipment
Deceleration
Controllers
Robotics
3 Citations (Scopus)

Evaluations of a multiple SOMs method for estimating missing values

Arima, K., Okada, N., Tsuji, Y. & Kiguchi, K., Jan 30 2014, 2014 IEEE/SICE International Symposium on System Integration, SII 2014. Institute of Electrical and Electronics Engineers Inc., p. 796-801 6 p. 7028140. (2014 IEEE/SICE International Symposium on System Integration, SII 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Data mining
Self organizing maps
Mathematical models
Experiments
4 Citations (Scopus)

Experimental investigation of blade rows interactions in contrarotating axial flow pump

Cao, L., Honda, H., Yoshimura, H., Watanabe, S. & Furukawa, A., Jan 1 2014, Symposia: Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Flow Manipulation and Active Control: Theory, Experiments and Implementation; Multiscale Methods for Multiphase Flow; Noninvasive Measurements in Single and Multiphase Flows. American Society of Mechanical Engineers (ASME), Vol. 1B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Turbomachine blades
Rotors
Pumps
Pressure measurement
5 Citations (Scopus)

Fatigue-life and leak-before-break assessments of CR-MO steel pressure vessels with high-pressure gaseous hydrogen

Yamabe, J., Itoga, H., Awane, T., Matsunaga, H., Hamada, S. & Matsuoka, S., Jan 1 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Fatigue crack propagation
Hydrogen
Pressure vessels
Steel

Frictional behavior of radial lip seals in mixed lubrication

Mizuta, H. & Sugimura, J., 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 3. p. 1893-1894 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lubrication
Seals
1 Citation (Scopus)

Giga-cycle property of a new age-hardened aluminium alloy containing excess solute magnesium

Takahashi, Y., Yoshitake, H., Shikama, T., Noguchi, H. & Takuma, M., Jan 1 2014, Advances in Fracture and Damage Mechanics XII. p. 293-296 4 p. (Key Engineering Materials; vol. 577-578).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnesium
Aluminum alloys
Cracks
Fatigue of materials
Fractography
2 Citations (Scopus)

Graphene oxide membrane fuel cells: Utilizing of a new class of ionic conductor

Bayer, T., Bishop, S. R., Nishihara, M., Sasaki, K. & Lyth, S. M., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Shinohara, K., Narayanan, S. R., Swider-Lyons, K., Weber, A., Coutanceau, C., Mantz, R., Gasteiger, H. A., Jones, D., Edmundson, M., Mitsushima, S., Ramani, V., Meas, Y., Fuller, T., Uchida, H., Buchi, F. N., Perry, K. A., Schmidt, T. J., Fenton, J. M. & Strasser, P. (eds.). 3 ed. Electrochemical Society Inc., p. 441-448 8 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Graphene
Fuel cells
Membranes
Oxides
Electrolytes
1 Citation (Scopus)

Grasp stability analysis for elastic fingertips by using potential energy

Tsuji, T., Baba, K., Tahara, K., Harada, K., Morooka, K. & Kurazume, R., Jan 30 2014, 2014 IEEE/SICE International Symposium on System Integration, SII 2014. Institute of Electrical and Electronics Engineers Inc., p. 453-458 6 p. 7028081

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Potential energy
Elastic deformation
Kinetic energy
1 Citation (Scopus)

Hybrid active noise barrier with sound masking

Wang, X., Koba, Y., Ishikawa, S. & Kijimoto, S., 2014, INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control. Australian Acoustical Society

Research output: Chapter in Book/Report/Conference proceedingConference contribution

masking
acoustics
conversation
loudness
privacy

Hydrotalcite-dispersed paper-structured catalyst for dry reforming of methane

Kakihara, Y., Shiratori, Y., Sakamoto, M., Takada, M., Uchida, T., Le, H. & Sasaki, K., Jan 1 2014, 20th World Hydrogen Energy Conference, WHEC 2014. Committee of WHEC2014, Vol. 2. p. 1411-1415 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reforming reactions
Solid oxide fuel cells (SOFC)
Methane
Catalysts
Electrochemical oxidation

Impact of water flow rate on current efficiency in solid polymer water electrolyzer under 2 MPa condition

Ito, K., Maeda, Y., Sakaguchi, T., Inada, A. & Nakajima, H., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Shinohara, K., Narayanan, S. R., Swider-Lyons, K., Weber, A., Coutanceau, C., Mantz, R., Gasteiger, H. A., Jones, D., Edmundson, M., Mitsushima, S., Ramani, V., Meas, Y., Fuller, T., Uchida, H., Buchi, F. N., Perry, K. A., Schmidt, T. J., Fenton, J. M. & Strasser, P. (eds.). 3 ed. Electrochemical Society Inc., p. 1019-1028 10 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow rate
Cathodes
Polymers
Water
Hydrogen

Influence of GDL coated with MPL containing CNTs on PEFC performance under low and high humidity conditions

Kitahara, T., Nakajima, H. & Okamura, K., 2014, Polymer Electrolyte Fuel Cells 14. 3 ed. Electrochemical Society Inc., Vol. 64. p. 477-483 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Fuel cells
Carbon nanotubes
Atmospheric humidity
Electrolytes

Integrated blood flowmeter using micromachining technology

Omori, Y., Sawada, R. & Sakano, S., Jan 1 2014, 13th IMEKO TC4 Symposium on Measurements for Research and Industrial Applications 2004, Held Together with the 9th Workshop on ADC Modeling and Testing. IMEKO-International Measurement Federation Secretariat, p. 447-452 6 p. (13th IMEKO TC4 Symposium on Measurements for Research and Industrial Applications 2004, Held Together with the 9th Workshop on ADC Modeling and Testing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

flowmeters
Flowmeters
Micromachining
micromachining
blood
4 Citations (Scopus)

Investigation of performance and durability of MEAs at higher temperature

Kitamura, M., Minamida, Y., Zhao, X., Noda, Z., Hayashi, A. & Sasaki, K., 2014, Polymer Electrolyte Fuel Cells 14. 3 ed. Electrochemical Society Inc., Vol. 64. p. 755-762 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Durability
Fuel cells
Cathodes
Electrolytes
Membranes
3 Citations (Scopus)

Low-cycle fatigue behavior and microstructural evolution of the Fe- 30Mn-4Si-2Al alloy

Nikulin, I., Sawaguchi, T., Ogawa, K. & Tsuzaki, K., Jan 1 2014, THERMEC 2013. Trans Tech Publications Ltd, p. 944-949 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microstructural evolution
Fatigue of materials
hardening
cycles
Hardening
1 Citation (Scopus)

Low-temperature gold-gold bonding using argon and hydrogen gas mixture atmospheric-pressure plasma treatment for optical microsystems

Higurashi, E., Yamamoto, M., Ikeda, S., Suga, T. & Sawada, R., Oct 14 2014, 2014 International Conference on Optical MEMS and Nanophotonics, OMN 2014 - Proceedings. IEEE Computer Society, p. 89-90 2 p. 6924607

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Argon
Microsystems
Gas mixtures
Gold
Atmospheric pressure

Measurement of Axial Position of a Microsphere Using Chromatic Confocal System for Probe System Based on the Laser Trapping with the Standing Wave Scale

Ueda, S. I., Michihata, M., Hayashi, T. & Takaya, Y., Jan 1 2014, 2014 International Symposium on Optomechatronic Technologies, ISOT 2014. Institute of Electrical and Electronics Engineers Inc., p. 223-227 5 p. 7119424. (2014 International Symposium on Optomechatronic Technologies, ISOT 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microspheres
Lasers
Interpolation
Scanning
Wavelength
1 Citation (Scopus)

Mechanism study for micro surgical robotic system that can induce multisensory illusion

Arata, J., Hattori, M., Sakaguchi, M., Nakadate, R., Oguri, S. & Hashizume, M., Feb 18 2014, 2014 Joint 7th International Conference on Soft Computing and Intelligent Systems, SCIS 2014 and 15th International Symposium on Advanced Intelligent Systems, ISIS 2014. Institute of Electrical and Electronics Engineers Inc., p. 1238-1242 5 p. 7044833

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Surgery
Time delay
Feedback

Method to analyze the spatial current distribution in an operating PEFC based on NMR mesurement using small planer surface coils

Ogawa, K., Yokouchi, Y., Haishi, T. & Ito, K., 2014, Proceedings of the 15th International Heat Transfer Conference, IHTC 2014. Begell House Inc.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

current distribution
fuel cells
Fuel cells
coils
Electrolytes

Micro-bubble ring genration by electrically-driven high-speed bubble strike under micro-fludic environment

Takasawa, S., Fujiwara, Y., Kobayashi, T., Ohmura, M., Kamegawa, H. & Yamanishi, Y., Jan 1 2014, 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014. Chemical and Biological Microsystems Society, p. 1548-1550 3 p. (18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microfluidics
Cleaning
Vortex flow
2 Citations (Scopus)

Microscopic mechanism of hydrogen embrittlement in fatigue and fracture

Murakami, Y., Yamabe, J. & Matsunaga, H., Jan 14 2014, Materials Structure and Micromechanics of Fracture VII. p. 3-13 11 p. (Key Engineering Materials; vol. 592-593).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen embrittlement
Hydrogen
Fatigue of materials
Mechanics
Steel
1 Citation (Scopus)

Modeling of tire friction force of vehicle considering nonholonomic constraints

Morinaga, A., Svinin, M. & Yamamoto, M., Jan 1 2014, 2014 13th International Conference on Control Automation Robotics and Vision, ICARCV 2014. Institute of Electrical and Electronics Engineers Inc., p. 1178-1183 6 p. 7064472

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Skidding
Tires
Friction
Motion planning
Planning

Observation of ice-solute interaction in freezing of trehalose and albumin solutions by using confocal Raman microscope equipped with directional solidification stage

Hirahara, H., Nagare, Y., Twomey, A., Kurata, K., Fukunaga, T., Aksan, A. & Takamatsu, H., 2014, Proceedings of the 15th International Heat Transfer Conference, IHTC 2014. Begell House Inc.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

albumins
Freezing
freezing
Ice
Solidification

Pelectrically induced bubble capillary-poration

Takahashi, K., Kawaguchi, W., Hamano, Y., Hosoda, S., Arakawa, Y. & Yamanishi, Y., Jan 1 2014, 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014. Chemical and Biological Microsystems Society, p. 1392-1394 3 p. (18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ablation
Surgery
Fabrication

Performance of an anode-supported honeycomb solid oxide fuel cell

Nakajima, H., 2014, THERMEC 2013. Trans Tech Publications Ltd, Vol. 783-786. p. 1698-1703 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

solid oxide fuel cells
Solid oxide fuel cells (SOFC)
Anodes
anodes
Channel flow