Department of Mechanical Engineering

Research Output 1979 2020

Filter
Conference contribution
2014
4 Citations (Scopus)

Investigation of performance and durability of MEAs at higher temperature

Kitamura, M., Minamida, Y., Zhao, X., Noda, Z., Hayashi, A. & Sasaki, K., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Shinohara, K., Narayanan, S. R., Swider-Lyons, K., Weber, A., Coutanceau, C., Mantz, R., Gasteiger, H. A., Jones, D., Edmundson, M., Mitsushima, S., Ramani, V., Meas, Y., Fuller, T., Uchida, H., Buchi, F. N., Perry, K. A., Schmidt, T. J., Fenton, J. M. & Strasser, P. (eds.). 3 ed. Electrochemical Society Inc., p. 755-762 8 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Durability
Fuel cells
Cathodes
Electrolytes
Membranes
3 Citations (Scopus)

Low-cycle fatigue behavior and microstructural evolution of the Fe- 30Mn-4Si-2Al alloy

Nikulin, I., Sawaguchi, T., Ogawa, K. & Tsuzaki, K., Jan 1 2014, THERMEC 2013. Trans Tech Publications Ltd, p. 944-949 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microstructural evolution
Fatigue of materials
hardening
cycles
Hardening
1 Citation (Scopus)

Low-temperature gold-gold bonding using argon and hydrogen gas mixture atmospheric-pressure plasma treatment for optical microsystems

Higurashi, E., Yamamoto, M., Ikeda, S., Suga, T. & Sawada, R., Oct 14 2014, 2014 International Conference on Optical MEMS and Nanophotonics, OMN 2014 - Proceedings. IEEE Computer Society, p. 89-90 2 p. 6924607. (International Conference on Optical MEMS and Nanophotonics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Argon
Microsystems
Gas mixtures
Gold
Atmospheric pressure

Measurement of Axial Position of a Microsphere Using Chromatic Confocal System for Probe System Based on the Laser Trapping with the Standing Wave Scale

Ueda, S. I., Michihata, M., Hayashi, T. & Takaya, Y., Jan 1 2014, 2014 International Symposium on Optomechatronic Technologies, ISOT 2014. Institute of Electrical and Electronics Engineers Inc., p. 223-227 5 p. 7119424. (2014 International Symposium on Optomechatronic Technologies, ISOT 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microspheres
Lasers
Interpolation
Scanning
Wavelength
1 Citation (Scopus)

Mechanism study for micro surgical robotic system that can induce multisensory illusion

Arata, J., Hattori, M., Sakaguchi, M., Nakadate, R., Oguri, S. & Hashizume, M., Feb 18 2014, 2014 Joint 7th International Conference on Soft Computing and Intelligent Systems, SCIS 2014 and 15th International Symposium on Advanced Intelligent Systems, ISIS 2014. Institute of Electrical and Electronics Engineers Inc., p. 1238-1242 5 p. 7044833

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Surgery
Time delay
Feedback

Micro-bubble ring genration by electrically-driven high-speed bubble strike under micro-fludic environment

Takasawa, S., Fujiwara, Y., Kobayashi, T., Ohmura, M., Kamegawa, H. & Yamanishi, Y., Jan 1 2014, 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014. Chemical and Biological Microsystems Society, p. 1548-1550 3 p. (18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microfluidics
Cleaning
Vortex flow
2 Citations (Scopus)

Microscopic mechanism of hydrogen embrittlement in fatigue and fracture

Murakami, Y., Yamabe, J. & Matsunaga, H., Jan 14 2014, Materials Structure and Micromechanics of Fracture VII. p. 3-13 11 p. (Key Engineering Materials; vol. 592-593).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen embrittlement
Hydrogen
Fatigue of materials
Mechanics
Steel
1 Citation (Scopus)

Modeling of tire friction force of vehicle considering nonholonomic constraints

Morinaga, A., Svinin, M. & Yamamoto, M., Jan 1 2014, 2014 13th International Conference on Control Automation Robotics and Vision, ICARCV 2014. Institute of Electrical and Electronics Engineers Inc., p. 1178-1183 6 p. 7064472

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Skidding
Tires
Friction
Motion planning
Planning

Pelectrically induced bubble capillary-poration

Takahashi, K., Kawaguchi, W., Hamano, Y., Hosoda, S., Arakawa, Y. & Yamanishi, Y., Jan 1 2014, 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014. Chemical and Biological Microsystems Society, p. 1392-1394 3 p. (18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ablation
Surgery
Fabrication
7 Citations (Scopus)

Pt/SnO2 electrocatalysts on conductive fillers

Horiguchi, D., Tsukatsune, T., Noda, Z., Hayashi, A. & Sasaki, K., Jan 1 2014, Polymer Electrolyte Fuel Cells 14. Gasteiger, H. A., Uchida, H., Buchi, F. N., Swider-Lyons, K., Jones, D., Ramani, V., Schmidt, T. J., Weber, A., Fenton, J. M., Meas, Y., Shinohara, K., Edmundson, M., Perry, K. A., Coutanceau, C., Mitsushima, S., Strasser, P., Mantz, R., Fuller, T. & Narayanan, S. R. (eds.). 3 ed. Electrochemical Society Inc., p. 215-220 6 p. (ECS Transactions; vol. 64, no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrocatalysts
Fillers
Catalyst supports
Oxygen
Fuel cells
5 Citations (Scopus)

Robotic tele-surgery through the Internet - System development and its feasibility tests

Arata, J., Mitsuishi, M. & Hashizume, M., Jan 1 2014, 2014 11th International Conference on Ubiquitous Robots and Ambient Intelligence, URAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 11-12 2 p. 7057511. (2014 11th International Conference on Ubiquitous Robots and Ambient Intelligence, URAI 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surgery
Robotics
Internet
Experiments
3 Citations (Scopus)

Scanning angle control of the optical micro scanner actuated by electrostatic force

Ishikawa, N., Ikeda, K., Okazaki, K. & Sawada, R., Oct 14 2014, 2014 International Conference on Optical MEMS and Nanophotonics, OMN 2014 - Proceedings. IEEE Computer Society, p. 121-122 2 p. 6924550. (International Conference on Optical MEMS and Nanophotonics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrostatic force
Scanning
Temperature
Electrodes
Electric potential
3 Citations (Scopus)

Simultaneous optimization of rotor blade and wind-lens for aerodynamic design of wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Kawamitsu, K., Kido, K. & Oka, A., Jan 1 2014, ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 3B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbomachine blades
Lenses
Aerodynamics
Turbines
Rotors
13 Citations (Scopus)

SSRT and fatigue crack growth properties of high-strength austenitic stainless steels in high-pressure hydrogen gas

Itoga, H., Matsuo, T., Orita, A., Matsunaga, H., Matsuoka, S. & Hirotani, R., Jan 1 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Fatigue crack propagation
Strain rate
Hydrogen
Gases
2 Citations (Scopus)

Superior lubricity in articular cartilage and artificial hydrogel cartilage

Murakami, T., Yarimitsu, S., Nakashima, K., Yamaguchi, T., Sawae, Y., Sakai, N. & Suzuki, A., 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 3. p. 2303-2306 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogel
Cartilage
Hydrogels

Suppression of secondary flows in an axial flow turbine rotor with a novel blade design concept

Yamada, K., Furukawa, M., Shibata, T., Nakakido, S. & Oka, N., Jan 1 2014, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cambers
Axial flow
Secondary flow
Turbomachine blades
Turbines
3 Citations (Scopus)

Task estimation of upper-limb using EEG and EMG signals

Kiguchi, K. & Hayashi, Y., Jan 1 2014, AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 548-553 6 p. 6878135. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Robots
Electrodes
3 Citations (Scopus)

Tensile-and fatigue-properties of low alloy steel JIS-SCM435 and carbon steel JIS-SM490B in 115 MPA hydrogen gas

Matsunaga, H., Yoshikawa, M., Itoga, H., Yamabe, J., Hamada, S. & Matsuoka, S., Jan 1 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
Carbon steel
Fatigue of materials
Hydrogen
Gases

The CHF enhancement combining nano-fluid and honeycomb porous plate in a saturated pool boiling

Mori, S., Aznam, S. M. & Okuyama, K., Jan 1 2014, Thermal Hydraulics. American Society of Mechanical Engineers (ASME), (International Conference on Nuclear Engineering, Proceedings, ICONE; vol. 2A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Porous plates
Boiling liquids
Fluids
Nanoparticles
Large scale systems
1 Citation (Scopus)

The influences of a hydrogen environment on the tribological properties of pure metals

Fukuda, K. & Sugimura, J., 2014, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 3. p. 2728 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen
Metals
2 Citations (Scopus)

Thermal and dissolved gas effects on cavitation in a 2-D convergent-divergent nozzle flow

Watanabe, S., Enomoto, K., Yamamoto, Y. & Hara, Y., Jan 1 2014, Fora: Cavitation and Multiphase Flow; Fluid Measurements and Instrumentation; Microfluidics; Multiphase Flows: Work in Progress; Fluid-Particle Interactions in Turbulence. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Nozzles
Thermal effects
Gases
Ethers

Total Angle Resolved Scattering Characterization for Ultra-fine Finished Surface Areal-Topography

Takaya, Y., Michihata, M. & Hayashi, T., Jan 1 2014, 2014 International Symposium on Optomechatronic Technologies, ISOT 2014. Institute of Electrical and Electronics Engineers Inc., p. 200-204 5 p. 7119419

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface topography
Scattering
Light scattering
Platinum
Lenses
1 Citation (Scopus)

Two axial shearing force measurement device with a built-in integrated micro displacement sensor

Takeshita, T., Iwasaki, T., Harisaki, K., Sawada, R., Ando, H., Arinaga, Y. & Higurashi, E., Jan 1 2014, IEEE ISSNIP 2014 - 2014 IEEE 9th International Conference on Intelligent Sensors, Sensor Networks and Information Processing, Conference Proceedings. IEEE Computer Society, 6827698. (IEEE ISSNIP 2014 - 2014 IEEE 9th International Conference on Intelligent Sensors, Sensor Networks and Information Processing, Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Force measurement
Shearing
Sensors
Ceilings
Mirrors
1 Citation (Scopus)

Two axial shearing force measurement device with a micro displacement sensor

Harisaki, K., Takeshita, T., Iwasaki, T., Ando, H., Uemura, K., Higurashi, E. & Sawada, R., Oct 14 2014, 2014 International Conference on Optical MEMS and Nanophotonics, OMN 2014 - Proceedings. IEEE Computer Society, p. 213-214 2 p. 6924528. (International Conference on Optical MEMS and Nanophotonics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Force measurement
Shearing
Sensors
Ceilings

Water molecule adsorption on vertically aligned single-walled carbon nanotubes

Moroizumi, H., Chiashi, S., Takata, Y. & Kohno, M., Jan 1 2014, ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2014, Collocated with the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Single-walled carbon nanotubes (SWCN)
Raman spectroscopy
Adsorption
Molecules
Water
2013
1 Citation (Scopus)

A dynamically realizable reconfiguration strategy for steering a spherical rolling with two internal rotors

Svinin, M. M., Morinaga, A. & Yamamoto, M., Jan 1 2013, 2013 IEEE International Conference on Mechatronics and Automation, IEEE ICMA 2013. IEEE Computer Society, p. 1-6 6 p. 6617884. (2013 IEEE International Conference on Mechatronics and Automation, IEEE ICMA 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion planning
Rotors
Kinematics
Angular velocity
Robots
5 Citations (Scopus)

Aerodynamic design for wind-lens turbine using optimization technique

Oka, N., Furukawa, M., Yamada, K. & Kido, K., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT02A009. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lenses
Aerodynamics
Turbines
Rotors
Viscous flow

A molecular dynamics analysis of quantum effect on the thermodynamic properties of liquid hydrogen

Nagashima, H., Tsuda, S., Tsuboi, N., Koshi, M., Hayashi, A. K. & Tokumasu, T., Dec 1 2013, ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013. V001T12A014. (ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Quantum Effects
Thermodynamic Properties
Dynamic Analysis
Molecular Dynamics
Dynamic analysis

Annealing time dependence on the phase equilibria and thermoelectric property of type-I Ba8Cu6Ag2Si38 clathrate

Bin, L., Makoto, S., Yuya, N., Takuya, O., Toshiko, O., Hideshi, M., Osamu, F. & Munetoh, S., Mar 20 2013, Engineered Technologies in Materials Science, Geotechnics, Environment and Mechanical Engineering. Vol. 310. p. 59-62 4 p. (Applied Mechanics and Materials; vol. 310).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase equilibria
Precipitates
Annealing
Transition metals
Grain boundaries

A photographic study on the effects of hydrophobic-spot size and subcooling on local film boiling

Suroto, B. J., Tashiro, M., Hirabayashi, S., Hidaka, S., Kohno, M., Takahashi, K. & Takata, Y., Dec 1 2013, ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013. V001T04A007. (ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boiling liquids
Circle
Polytetrafluoroethylene
Polytetrafluoroethylenes
Heat Flux

Application of mems technique for micro gear metrology

Kurokawa, S., Umezaki, Y., Hoga, M., Ishimaru, R., Ohnishi, O. & Doi, T., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 457-466 10 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Gear teeth
Measurement errors
MEMS
Machining

Application of nano-imprint technology to grating scale for a rotary microencoder

Takeshita, T., Iwasaki, T., Higurashi, E., Miyazaki, T. & Sawada, R., 2013, Optical MEMS and Nanophotonics 2013, OMN 2013 - Proceedings. p. 117-118 2 p. 6659087

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffraction gratings
Photolithography
Nanotechnology
Machining
2 Citations (Scopus)

Backward-Euler discretization of second-order sliding mode control and super-twisting observer for accurate position control

Xiong, X., Kikuuwe, R. & Yamamoto, M., 2013, Nonlinear Estimation and Control; Optimization and Optimal Control; Piezoelectric Actuation and Nanoscale Control; Robotics and Manipulators; Sensing;. American Society of Mechanical Engineers (ASME), Vol. 3. V003T44A002

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Position control
Sliding mode control
Three term control systems

Behavior of adsorbed albumin film on CoCrMo Alloy under In-situ observation

Nakashima, K., Sawae, Y., Murakami, T. & Mischler, S., Jan 1 2013, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), p. 445-447 3 p. (5th World Tribology Congress, WTC 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Albumins
1 Citation (Scopus)

Camera based 3D probe control in measuring gear profile

Ali, M. H., Kurokawa, S. & Uesugi, K., 2013, Proceedings - 2013 2nd International Conference on Robot, Vision and Signal Processing, RVSP 2013. IEEE Computer Society, p. 242-246 5 p. 6830022

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Cameras
Measurement errors
Control theory
Computer systems
6 Citations (Scopus)

Characteristics in SiC-CMP using MnO2 slurry with strong oxidant under different atmospheric conditions

Kurokawa, S., Doi, T., Ohnishi, O., Yamazaki, T., Tan, Z. & Yin, T., Jan 1 2013, Evolutions in Planarization: Equipment, Materials, Techniques and Applications. Materials Research Society, p. 39-47 9 p. (Materials Research Society Symposium Proceedings; vol. 1560).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
meteorology
Oxidants
Silicon carbide
silicon carbides
7 Citations (Scopus)

Compensation of the effects of muscle fatigue on EMG-based control using fuzzy rules based scheme

Lalitharatne, T. D., Hayashi, Y., Teramoto, K. & Kiguchi, K., Oct 31 2013, 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2013. p. 6949-6952 4 p. 6611156. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromyography
Muscle Fatigue
Fuzzy rules
Muscle
Fatigue of materials
1 Citation (Scopus)

Control of foot trajectry in perception-assist with a power-assist robot

Kiguchi, K., Yokomine, Y., Okada, N. & Hayashi, Y., Jan 1 2013, Proceedings - 2013 2nd International Conference on Robot, Vision and Signal Processing, RVSP 2013. IEEE Computer Society, p. 224-228 5 p. 6830018. (Proceedings - 2013 2nd International Conference on Robot, Vision and Signal Processing, RVSP 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Experiments

Determination of α / γ phase boundaries in the Fe-Cr-Ni-Mn quaternary system with a diffusion-multiple method

Shuro, I., Kobayashi, S., Nakamura, T. & Tsuzaki, K., Jan 1 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 577-582 6 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase boundaries
Chromium
Manganese
Nickel
Chemical analysis

Development of a laser-guided deep-hole measurement system: Adjustment to a small size

K, A., Ali, M. D. H., S, T., Hiroshi, M., O, O. & Kurokawa, S., Dec 26 2013, Proceedings of the 28th Annual Meeting of the American Society for Precision Engineering, ASPE 2013. p. 431-436 6 p. (Proceedings of the 28th Annual Meeting of the American Society for Precision Engineering, ASPE 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser
Lasers

Development of a novel gait rehabilitation system based on FES and treadmill-walk for convalescent hémiplégie stroke survivors

Ye, J., Nakashima, Y., Watanabe, T., Seki, M., Zhang, B., Liu, Q., Yokoo, Y., Kobayashi, Y., Cao, Q. & Fujie, M. G., Dec 1 2013, IROS 2013: New Horizon, Conference Digest - 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems. p. 977-982 6 p. 6696469. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Exercise equipment
Patient rehabilitation
Muscle
Launching
Chemical activation
2 Citations (Scopus)

Development of durable electrocatalysts for PEFC through graphitization of carbon support surface

Zhao, X., Hayashi, A., Noda, Z. & Sasaki, K., Jan 1 2013, Advances in Low Temperature Electrolyzer and Fuel Cell Technology: In Honor of Anthony B. (Tony) LaConti. 12 ed. Electrochemical Society Inc., p. 23-29 7 p. (ECS Transactions; vol. 53, no. 12).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Graphitization
Electrocatalysts
Catalyst supports
Carbon
Durability
5 Citations (Scopus)

Development of ultra low power wireless sensor node with piezoelectric accelerometer for health monitoring

Okada, H., Nogami, H., Kobayashi, T., Masuda, T. & Itoh, T., Dec 1 2013, 2013 Transducers and Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013. p. 26-29 4 p. 6626692. (2013 Transducers and Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Health care
Accelerometers
Sensor nodes
Electric power utilization
Health

Difference between experienced surgeons and beginners in suturing skills in laparoscopic surgery

Kiguchi, K., Yoshino, K., Hayashi, Y., Uemura, M., Tomikawa, M. & Hashizume, M., Sep 18 2013, Proceedings of the IASTED International Conference on Biomedical Engineering, BioMed 2013. p. 271-275 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surgery
Simulators
Experiments
Sensors

Direct laser forming for more complex shaped titanium alloy compacts

Miura, H., Kang, H., Xu, Y., Tsumori, F. & Osada, T., Jan 1 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 1587-1595 9 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium alloys
Medical applications
Lasers
Aerospace applications
Titanium

Dispensing of mono-dispersed micro-bubbles for cell ablation

Kuriki, H., Yamanishi, Y., Sakuma, S., Akagi, S. & Arai, F., Nov 14 2013, 2013 IEEE International Conference on Robotics and Automation, ICRA 2013. p. 2783-2788 6 p. 6630961. (Proceedings - IEEE International Conference on Robotics and Automation).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ablation
Wire
Electric discharges
Glass
Cell membranes
1 Citation (Scopus)

Effect of occasional shear loading on fatigue crack growthin 7075 aluminum alloy

Makizaki, M., Matsunaga, H., Yanase, K. & Endo, M., Apr 10 2013, Advanced Materials Science and Technology. p. 264-267 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

aluminum alloys
Aluminum alloys
Crack propagation
cracks
shear
24 Citations (Scopus)

Effects of tip clearance on the stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Dec 17 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. GT2013-95479. (Proceedings of the ASME Turbo Expo; vol. 6 C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Vortex flow
Rotors
Flow fields
Tornadoes
1 Citation (Scopus)

Estimation of joint force/torque based on EMG signals

Kiguchi, K., Tamura, K. & Hayashi, Y., Oct 31 2013, Proceedings of the 2013 IEEE Workshop on Robotic Intelligence in Informationally Structured Space, RiiSS 2013 - 2013 IEEE Symposium Series on Computational Intelligence, SSCI 2013. p. 20-24 5 p. 6607924. (Proceedings of the 2013 IEEE Workshop on Robotic Intelligence in Informationally Structured Space, RiiSS 2013 - 2013 IEEE Symposium Series on Computational Intelligence, SSCI 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Muscle
Torque
Hip prostheses
Simulators
Arthroplasty

Estimation of user's motion intention of hand based on both EMG and EEG signals

Kiguchi, K. & Hayashi, Y., Dec 3 2013, ICINCO 2013 - Proceedings of the 10th International Conference on Informatics in Control, Automation and Robotics. p. 447-452 6 p. (ICINCO 2013 - Proceedings of the 10th International Conference on Informatics in Control, Automation and Robotics; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electroencephalography
Robots
Brain
Experiments