Department of Mechanical Engineering

Research Output 1979 2020

Filter
Paper
2014

Dynamics of evaporation in a single, straight-tube pulsating heat pipe

Okuyama, K., Ichikawa, T. & Mori, S., Jan 1 2014.

Research output: Contribution to conferencePaper

heat pipes
Heat pipes
Evaporation
Vapors
evaporation
Thermal energy
Energy storage
Thermal conductivity
Phase change materials
Composite materials

Method to analyze the spatial current distribution in an operating PEFC based on NMR mesurement using small planer surface coils

Ogawa, K., Yokouchi, Y., Haishi, T. & Ito, K., Jan 1 2014.

Research output: Contribution to conferencePaper

frequency shift keying
Frequency shift keying
Diffusion in gases
Magnetism
Proton exchange membrane fuel cells (PEMFC)

Observation of ice-solute interaction in freezing of trehalose and albumin solutions by using confocal Raman microscope equipped with directional solidification stage

Hirahara, H., Nagare, Y., Twomey, A., Kurata, K., Fukunaga, T., Aksan, A. & Takamatsu, H., Jan 1 2014.

Research output: Contribution to conferencePaper

Series study on the thermal transport properties of nanofilm by applying transient thermoreflectance method

Ma, W., Zhang, X., Kubo, K., Kohno, M., Takata, Y., Ikuta, T. & Takahashi, K., Jan 1 2014.

Research output: Contribution to conferencePaper

Electron transport properties
Ultrafast lasers
Electron-phonon interactions
Metallic films
Thermal diffusivity

Study of creep damage in creep exposed martensitic high chromium steel weldments

Schlacher, C., Béal, C., Sommitsch, C., Toda, H. & Mayr, P., Jan 1 2014, p. 914-923. 10 p.

Research output: Contribution to conferencePaper

Fossil fuel power plants
Creep testing
Martensitic steel
Computerized tomography
Heat affected zone

The effect of humidity in ambient gas on HTWs in volatile drops

Fukatani, Y., Kohno, M., Takata, Y., Sefiane, K. & Kim, J., Jan 1 2014.

Research output: Contribution to conferencePaper

humidity
Atmospheric humidity
Evaporation
evaporation
Liquids

Wettability-driven water condensation at the micron and submicron scale

Yamada, Y., Kusaba, A., Ikuta, T., Nishiyama, T., Takahashi, K. & Takata, Y., Jan 1 2014.

Research output: Contribution to conferencePaper

Magnetic bubbles
Hydrophilicity
Hydrophobicity
hydrophobicity
nanotechnology
2013
1 Citation (Scopus)

Effects of hydrogen concentration on stoichiometric H2/CH 4/air premixed turbulent flames

Okafor, E. C., Nagano, Y. & Kitagawa, T., Dec 19 2013.

Research output: Contribution to conferencePaper

Hydrogen
Air
Turbulence
Combustion chambers
Fans

Measurement of effective stress intensity factor range of mode II fatigue crack growth using hysteresis loop

Hamada, S. & Liu, M., Jan 1 2013, p. 1717-1723. 7 p.

Research output: Contribution to conferencePaper

Hysteresis loops
effective stress
Fatigue crack propagation
hysteresis
fatigue

Nanobubbles on a very flat hydrophobic surface prepared by self-assembled monolayers

Nishiyama, T., Takahashi, K. & Takata, Y., Jan 1 2013.

Research output: Contribution to conferencePaper

Self assembled monolayers
Boiling liquids
Microscopes
Bubbles (in fluids)
Nucleation

Small crack effect on threshold stress intensity KTH for high strength steel with internal hydrogen

Murakami, Y., Matsunaga, H., Abyazi, A. & Fukushima, Y., Jan 1 2013, p. 1309-1318. 10 p.

Research output: Contribution to conferencePaper

High strength steel
defect
crack
steel
hydrogen
2012

流下液膜式熱交換器の伝熱特性に関する研究

Translated title of the contribution: Study on Heat Transfer Characteristics of Falling Film Type Heat Exchanger喜多由拓 & 白岩寛之, Aug 20 2012, p. 1607-1610. 4 p.

Research output: Contribution to conferencePaper

鼻腔内気流と粘膜血管間の熱伝達に関するボクセルシミュレーション(A1-2 生体流体工学2)

Translated title of the contribution: Voxel-based simulation of heat transfer between nasal airflow and mucosal vesseles荒木冬人, 水谷崇志, Tanaka, G., 世良俊博, 横田秀夫, 小野謙二 & 高木周, Oct 4 2012, p. 21-22. 2 p.

Research output: Contribution to conferencePaper

2010
1 Citation (Scopus)
Hydrogen
Composite materials
Gases
Carbon black
Cracks

Successful optical MEMS and their applications

Sawada, R., Dec 1 2010, p. 1603-1606. 4 p.

Research output: Contribution to conferencePaper

MOEMS
Sensors
MEMS
Packaging
Tissue
2009
4 Citations (Scopus)

Combustion properties of coal gasification gas for IGCC power generation system with CO2 capture

Kado, K., Nakahara, T., Takeo, T. & Kitagawa, T., Jan 1 2009.

Research output: Contribution to conferencePaper

Coal gasification
Power generation
Gases
Dilution
Gasification

Development of a measuring system for micro hole accuracy using an optical fiber probe-evaluation of measurement repeatability

Murakami, H., Katsuki, A., Onikura, H., Sajima, T., Kawagoishi, N., Kondo, E. & Honda, T., Dec 1 2009.

Research output: Contribution to conferencePaper

Optical fibers
Surface roughness
Scanning

Effect of fullerene poly-hydroxide on Cu-CMP process

Kishida, H., Hayashi, T., Takaya, Y., Kokubo, K. & Suzuki, K., Dec 1 2009.

Research output: Contribution to conferencePaper

Fullerenes
Polishing
Copper
Abrasives
Hydrogen peroxide

Large-eddy simulation of coal combustion on a pulverized coal combustion test furnace with a practical swirl burner

Watanabe, H., Tanno, K., Baba, Y., Kurose, R. & Komori, S., Jan 1 2009.

Research output: Contribution to conferencePaper

Coal combustion
Large eddy simulation
Fuel burners
Furnaces
Experiments

PVT measurements of high pressure gas by the Burnett method

Sakoda, N., Shindo, K., Shinzato, K., Kohno, M., Takata, Y. & Fujii, M., Jan 1 2009.

Research output: Contribution to conferencePaper

Gases
Equations of state
Nitrogen
Hydrogen
Helium
2008

Application of micron-spiked electrodes produced by the phase transformation phenomenon of stainless steel for gene transfer device

Miyano, N., Morieda, M., Inoue, Y., Teramura, Y., Tsumori, F., Iwata, H. & Kotera, H., Jan 1 2008, p. 910-912. 3 p.

Research output: Contribution to conferencePaper

Gene transfer
Stainless Steel
Stainless steel
Phase transitions
Electrodes

Numerical study of combustion process with a pulsed flame jet igniter

Teraji, A., Noda, T., Kubo, M., Nakashima, F., Moriue, O. & Murase, E., Dec 1 2008, p. 679-685. 7 p.

Research output: Contribution to conferencePaper

Flame
Combustion
Numerical Study
Time Scales
Model
3 Citations (Scopus)

The effects of pressure on laminar and turbulent burning velocities of spherically propagating iso-octane flames

Kitagawa, T., Furukawa, K., Nakahara, T. & Maruyama, K., Dec 1 2008, p. 505-510. 6 p.

Research output: Contribution to conferencePaper

Flame
Turbulence
Peclet number
Equivalence
Internal Combustion Engine
2007

Characteristics of combustion in lean mixtures initiated by an imploding detonation plug

Hotta, K., Yoshikawa, Y., Okuma, K., Moriue, O. & Murase, E., Dec 1 2007.

Research output: Contribution to conferencePaper

Detonation
Oxygen
Combustion chambers
Nozzles
Momentum

Effects of overall equivalence ratio of premixed spray on flame structure of spray jet with a low-volatility fuel

Mikami, M., Nakamoto, K., Kojima, N. & Moriue, O., Jan 1 2007.

Research output: Contribution to conferencePaper

volatility
sprayers
equivalence
flames
Flow rate

Effects of oxygen enrichment on pulsed flame jet ignition

Nishimura, Y., Moriue, O., Kubo, M., Hotta, I. & Murase, E., Jan 1 2007.

Research output: Contribution to conferencePaper

combustion chambers
Combustion chambers
ignition
Ignition
igniters

Propagation and quench of premixed turbulent flames

Kitagawa, T., Smallbone, A. & Oonishi, T., Dec 1 2007.

Research output: Contribution to conferencePaper

Turbulence
Fans
Reynolds number
Experiments

The influence of thermo-diffusive aspects on premixed turbulent flame propagation rates at elevated pressures

Smallbone, A. & Kitagawa, T., Jan 1 2007.

Research output: Contribution to conferencePaper

turbulent flames
premixed flames
flame propagation
Lewis numbers
fans
2006

3D visualization of cavitation in a probe tack experiment on pressure-sensitive-adhesives

Koike, K., Yamaguchi, T. & Doi, M., Oct 18 2006. 1 p.

Research output: Contribution to conferencePaper

Cavitation
Adhesives
Visualization
Experiments
Nucleation

Configuration dependence of softmatter sliding friction

Oshikawa, M., Kaneko, D., Yamaguchi, T., Morita, H., Gong, J. P. & Doi, M., Oct 19 2006. 1 p.

Research output: Contribution to conferencePaper

Rubber
Friction
Lubrication
Digestive system
Rheometers

Lithium ion conductive polymer electrolytes by side group rotation - Effects on the conductivity by copolymerization with various monomers-

Sato, A., Nishimura, S., Kono, K., Tabata, D. & Yamamoto, H., Dec 1 2006, p. 4671-4672. 2 p.

Research output: Contribution to conferencePaper

Ionic conduction
Lithium batteries
Copolymerization
Lithium
Ionic conductivity

Modeling on cavitation dynamics in pressure sensitive adhesives

Yamaguchi, T., Koike, K. & Doi, M., Oct 18 2006. 1 p.

Research output: Contribution to conferencePaper

Cavitation
Adhesives
Stress-strain curves
2005

An experimental study on combustion of lean-premixed n-decane sprays in counterflow

Mikami, M., Kikuchi, Y., Kojima, N. & Moriue, O., Dec 1 2005, p. 201-204. 4 p.

Research output: Contribution to conferencePaper

Drop formation
Paraffin
Paraffins
Luminance
Liquid fuels

A study on managing cycle of measures for incident based on visualizing problems

Otsuka, Y. & Noguchi, H., Dec 1 2005, p. 33-38. 6 p.

Research output: Contribution to conferencePaper

Crystallography and hydrogen trapping of alloy carbides in steel

Wei, F. G. & Tsuzaki, K., Dec 1 2005, p. 235-246. 12 p.

Research output: Contribution to conferencePaper

Crystallography
Carbides
Precipitates
Hydrogen
Steel

Flame-spread behavior of fuel-droplet arrays with uneven inter-droplet distance

Oyagi, H., Moriue, O., Mikami, M. & Kojima, N., Dec 1 2005, p. 213-216. 4 p.

Research output: Contribution to conferencePaper

Drop formation

Lithium ion conductive polymer electrolytes by side group rotation(II)

Satou, A., Nishimura, S., Urabe, S., Yamamoto, H. & Ueyama, N., Dec 1 2005. 1 p.

Research output: Contribution to conferencePaper

Lithium
Ionic conductivity
Electrolytes
Ions
Polymers

Lithium ion conductive polymer electrolytes by side group rotation(III)

Satou, A., Nishimura, S., Urabe, S., Yamamoto, H. & Ueyama, N., Dec 1 2005. 1 p.

Research output: Contribution to conferencePaper

Ionic conductivity
Lithium
Electrolytes
Homopolymerization
Ions

Molecular dynamics simulation study of the adhesion between end-grafted polymer films

Morita, H., Yamada, M., Yamaguchi, T. & Doi, M., Dec 1 2005, p. 3319-3320. 2 p.

Research output: Contribution to conferencePaper

Polymer films
Molecular dynamics
Adhesion
Computer simulation
Polymers
19 Citations (Scopus)

Sulfur tolerance of solid oxide fuel cells

Sasaki, K., Susuki, K., Iyoshi, A., Uchimura, M., Imamura, N., Kusaba, H., Teraoka, Y., Fuchino, H., Tsujimoto, K., Uchida, Y. & Jingo, N., Dec 1 2005, p. 1267-1274. 8 p.

Research output: Contribution to conferencePaper

Solid oxide fuel cells (SOFC)
Sulfur
Electrolytes
Gas fuels
Electric potential
2004
34 Citations (Scopus)

Effect of tip clearance on stall evolution process in a low-speed axial compressor stage

Inoue, M., Yoshida, S., Yamada, K., Kuroumaru, M., Minami, T. & Furukawa, M., Dec 22 2004, p. 385-394. 10 p.

Research output: Contribution to conferencePaper

Compressors
Vortex flow
Rotors
Tornadoes
Flow simulation
18 Citations (Scopus)

The tactile contact lens

Kikuuwe, R., Sano, A., Mochiyama, H., Takesue, N., Tsunekawa, K., Suzuki, S. & Fujimoto, H., Dec 1 2004, p. 535-538. 4 p.

Research output: Contribution to conferencePaper

Contact lenses
Skin
Display devices
Tissue
43 Citations (Scopus)

Unsteady three-dimensional flow phenomena due to breakdown of tip leakage vortex in a transonic axial compressor rotor

Yamada, K., Furukawa, M., Nakano, T., Inoue, M. & Funazaki, K., Dec 22 2004, p. 515-526. 12 p.

Research output: Contribution to conferencePaper

Compressors
Vortex flow
Rotors
Flow fields
Shock waves
2003

Characteristics of combustion in stratified mixture

Kitagawa, T., Kido, H., Kim, K. S., Fujioka, K. & Nakamura, N., Dec 1 2003.

Research output: Contribution to conferencePaper

Jet fuel
Propane
Quenching
Experiments
Flammability

Studies on Effects of Periodic Wake Passing upon a Blade Leading Edge Separation Bubble: Experimental Investigation using a Simple Leading Edge Model

Funazaki, K., Yamada, K. & Kato, Y., Dec 1 2003, p. 761-769. 9 p.

Research output: Contribution to conferencePaper

Turbulence
Strouhal number
Turbomachine blades
Compressors
Aerodynamics

Trajectory Planning of Cooperative Multiple Mobile Manipulators

Furuno, S., Yamamoto, M. & Mohri, A., Dec 26 2003, p. 136-141. 6 p.

Research output: Contribution to conferencePaper

Optimal control systems
Object recognition
Collision avoidance
Manipulators
Equations of motion
2002

Control of the start of HCCI combustion by pulsed flame jet

Murase, E. & Hanada, K., Dec 1 2002.

Research output: Contribution to conferencePaper

Ignition
Butane
Combustion chambers
Compaction
Air

Hydrogen absorbing properties and crystal structure of Ti-V-Mn solid solution alloys

Nakamura, Y. & Akiba, E., Jan 1 2002, p. 109-120. 12 p.

Research output: Contribution to conferencePaper

Hydrides
Hydrogen
Solid solutions
solid solutions
Crystal structure
25 Citations (Scopus)

Physics of tip clearance flow in turbomachinery

Inoue, M. & Furukawa, M., Jan 1 2002, p. 777-789. 13 p.

Research output: Contribution to conferencePaper

Turbomachinery
Flow fields
Vortex flow
Physics
Axial-flow compressors