Department of Mechanical Engineering

Research Output 1979 2020

Filter
Article
2020
austenitic stainless steels
notches
Austenitic stainless steel
phase transformations
Phase transitions

Measurement of the microlayer characteristics in the whole range of nucleate boiling for water by laser interferometry

Chen, Z., Hu, X., Hu, K., Utaka, Y. & Mori, S., Jan 2020, In : International Journal of Heat and Mass Transfer. 146, 118856.

Research output: Contribution to journalArticle

Laser interferometry
nucleate boiling
laser interferometry
Nucleate boiling
Heat flux

Revealing the mechanism of critical root radius in notch fatigue limit based on crack closure concept

Li, B., Jiang, C., Noguchi, H. & Liu, L., Jan 2020, In : International Journal of Fatigue. 130, 105261.

Research output: Contribution to journalArticle

Fatigue Crack Propagation
Fatigue Limit
Crack Closure
Fatigue Crack Growth
Crack closure
2019
2 Citations (Scopus)

1-second-resolved strain mapping in Ti-6Al-4V alloys during dwell fatigue in SEM by video sampling moiré

Wang, Q., Ri, S., Maenosono, A., Tanaka, Y. & Koyama, M., Jun 1 2019, In : Mechanics of Materials. 133, p. 63-70 8 p.

Research output: Contribution to journalArticle

dwell
Electron microscopes
electron microscopes
sampling
Fatigue of materials

Abnormally enhanced diamagnetism in Al-Zn-Mg alloys

Nishimura, K., Matsuda, K., Lee, S., Nunomura, N., Shimano, T., Bendo, A., Watanabe, K., Tsuchiya, T., Namiki, T., Toda, H. & Yamaguchi, M., Feb 5 2019, In : Journal of Alloys and Compounds. 774, p. 405-409 5 p.

Research output: Contribution to journalArticle

Diamagnetism
Magnetization
Aging of materials
Heat treatment
Vacancies
2 Citations (Scopus)

A combination of the finite element analysis and experimental indentation via the cornea

Karimi, A., Razaghi, R., Sera, T. & Kudo, S., Feb 1 2019, In : Journal of the Mechanical Behavior of Biomedical Materials. 90, p. 146-154 9 p.

Research output: Contribution to journalArticle

Indentation
Finite element method
Elastic moduli
Stiffness

Adsorbed gas layers limit the mobility of micropancakes

Teshima, H., Takata, Y. & Takahashi, K., Aug 12 2019, In : Applied Physics Letters. 115, 7, 071603.

Research output: Contribution to journalArticle

gases
atomic force microscopy
vapor phases
pyrolytic graphite
solid surfaces

Al-10Mg 合金における応力腐食割れ挙動に及ぼす水素の影響

Translated title of the contribution: Influence of hydrogen on stress corrosion cracking behavior in Al-10Mg alloyHirayama, K., Toda, H., Shimizu, K., Uesugi, K., Takeuchi, A. & Masunaga, R., Jan 1 2019, In : Keikinzoku/Journal of Japan Institute of Light Metals. 69, 4, p. 223-227 5 p.

Research output: Contribution to journalArticle

Open Access
Stress corrosion cracking
Hydrogen
Corrosion
Cracks
Synchrotrons

An unreported precipitate orientation relationship in Al-Zn-Mg based alloys

Bendo, A., Matsuda, K., Lervik, A., Tsuru, T., Nishimura, K., Nunomura, N., Holmestad, R., Marioara, C. D., Shimizu, K., Toda, H. & Yamaguchi, M., Dec 2019, In : Materials Characterization. 158, 109958.

Research output: Contribution to journalArticle

zinc alloys
Zinc alloys
Ternary alloys
ternary alloys
Coarsening

Assessment of hydrogen embrittlement via image-based techniques in Al–Zn–Mg–Cu aluminum alloys

Su, H., Toda, H., Shimizu, K., Uesugi, K., Takeuchi, A. & Watanabe, Y., Sep 1 2019, In : Acta Materialia. 176, p. 96-108 13 p.

Research output: Contribution to journalArticle

Hydrogen embrittlement
Hydrogen
Aluminum alloys
Intermetallics
Precipitates

Assessment of predominant microstructural features controlling 3D short crack growth behavior via a surrogate approach in Ti-6Al-4V

Hassanipour, M., Watanabe, S., Hirayama, K., Li, H., Toda, H., Uesugi, K. & Takeuchi, A., Mar 28 2019, In : Materials Science and Engineering A. 751, p. 351-362 12 p.

Research output: Contribution to journalArticle

short cracks
Crack propagation
cracks
Cracks
shear stress

Attempts on pico-precision machining via combination of ELID-grinding and polishing

Ohmori, H., Kim, Y., Uehara, Y., Kasuga, H., Ono-Kato, T., Lin, W., Kurokawa, S. & Umezu, S., Jan 1 2019, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 4, p. 304-309 6 p.

Research output: Contribution to journalArticle

Polishing
Machining

Biogas Power Generation with SOFC to Demonstrate Energy Circulation Suitable for Mekong Delta, Vietnam

Shiratori, Y., Sakamoto, M., Nguyen, T. G. H., Yamakawa, T., Kitaoka, T., Orishima, H., Matsubara, H., Watanabe, Y., Nakatsuka, S., Doan, T. C. D. & Dang, C. M., Jan 1 2019, In : Fuel Cells. 19, 4, p. 346-353 8 p.

Research output: Contribution to journalArticle

Biogas
Solid oxide fuel cells (SOFC)
Power generation
Bagasse
Ponds

Biomimetic artificial cartilage: Fibre-reinforcement of PVA hydrogel to promote biphasic lubrication mechanism

Sakai, N., Yarimitsu, S., Sawae, Y., Komori, M. & Murakami, T., Mar 1 2019, In : Biosurface and Biotribology. 5, 1, p. 13-19 7 p.

Research output: Contribution to journalArticle

Open Access
Lubrication
Biomimetics
Hydrogel
Cartilage
Fiber reinforced materials

Bio-mimic motion of 3D-printed gel structures dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., Jan 1 2019, In : Journal of the Electrochemical Society. 166, 9, p. B3235-B3239

Research output: Contribution to journalArticle

Open Access
Particles (particulate matter)
Gels
Actuators
Magnetic fields
Magnetic anisotropy
1 Citation (Scopus)

Characterisation of structural similarities of precipitates in Mg–Zn and Al–Zn–Mg alloys systems

Bendo, A., Maeda, T., Matsuda, K., Lervik, A., Holmestad, R., Marioara, C. D., Nishimura, K., Nunomura, N., Toda, H., Yamaguchi, M., Ikeda, K. I. & Homma, T., Nov 2 2019, In : Philosophical Magazine. 99, 21, p. 2619-2635 17 p.

Research output: Contribution to journalArticle

precipitates
hexagons
bricks
cells
aspect ratio

Choice of muscular forces for motion control of a robot arm with biarticular muscles

Morizono, T., Tahara, K. & Kino, H., Jan 1 2019, In : Journal of Robotics and Mechatronics. 31, 1, p. 143-155 13 p.

Research output: Contribution to journalArticle

Motion control
Muscle
Robots
Robotic arms
Kinetics

CMP characteristics of quartz glass substrate by aggregated colloidal ceria slurry

Wakamatsu, K., Kurokawa, S., Toyama, T. & Hayashi, T., Nov 1 2019, In : Precision Engineering. 60, p. 458-464 7 p.

Research output: Contribution to journalArticle

Cerium compounds
Quartz
Glass
Substrates
Polishing

Colorectal endoscopic submucosal dissection using novel articulating devices: a comparative study in a live porcine model

Okamoto, Y., Nakadate, R., Nakamura, S., Arata, J., Oguri, S., Tomohiko, M., Esaki, M., iwasa, T., Ouchida, K., Akahoshi, T., Ikeda, T., Kitazono, T. & Hashizume, M., Feb 15 2019, In : Surgical endoscopy. 33, 2, p. 651-657 7 p.

Research output: Contribution to journalArticle

Swine
Equipment and Supplies
Endoscopic Mucosal Resection
Anal Canal
Colon
1 Citation (Scopus)

Comparative study of hydrogen-induced intergranular fracture behavior in Ni and Cu–Ni alloy at ambient and cryogenic temperatures

Wada, K., Yamabe, J., Ogawa, Y., Takakuwa, O., Iijima, T. & Matsunaga, H., Oct 24 2019, In : Materials Science and Engineering A. 766, 138349.

Research output: Contribution to journalArticle

cryogenic temperature
Cryogenics
ambient temperature
Hydrogen
hydrogen embrittlement
Open Access
end effectors
Brain computer interface
Near infrared spectroscopy
End effectors
strokes
1 Citation (Scopus)

Coupled thermal transport and mass diffusion during vapor absorption into hygroscopic liquid desiccant droplets

Wang, Z., Orejon, D., Sefiane, K. & Takata, Y., May 1 2019, In : International Journal of Heat and Mass Transfer. 134, p. 1014-1023 10 p.

Research output: Contribution to journalArticle

Hygroscopic Agents
desiccants
Vapors
vapors
Liquids

Crystallographic selection rule for the propagation mode of microstructurally small fatigue crack in a laminated Ti-6Al-4V alloy: Roles of basal and pyramidal slips

Maenosono, A., Koyama, M., Tanaka, Y., Ri, S., Wang, Q. & Noguchi, H., Nov 1 2019, In : International Journal of Fatigue. 128, 105200.

Research output: Contribution to journalArticle

Fatigue Crack Growth
Fatigue Crack
Selection Rules
Fatigue crack propagation
Slip
2 Citations (Scopus)

Density Data of Two (H2 + CO2) Mixtures and a (H2 + CO2 + CH4) Mixture by a Modified Burnett Method at Temperature 673 K and Pressures up to 25 MPa

Cheng, S., Shang, F., Ma, W., Jin, H., Sakoda, N., Zhang, X. & Guo, L., Apr 11 2019, In : Journal of Chemical and Engineering Data. 64, 4, p. 1693-1704 12 p.

Research output: Contribution to journalArticle

Equations of state
Temperature
Water
Coal
Gasification

Density measurements of the H2-CO2-CH4-CO-H2O System by the Isochoric Method at 722-930 K and 15.4-30.3 MPa

Cheng, S., Shang, F., Ma, W., Jin, H., Sakoda, N., Zhang, X. & Guo, L., Sep 12 2019, In : Journal of Chemical and Engineering Data. 64, 9, p. 4013-4023 11 p.

Research output: Contribution to journalArticle

Volumetric analysis
Carbon Monoxide
Carbon Dioxide
Thermal expansion
Carbon dioxide

Design, modeling, and motion analysis of a novel fluid actuated spherical rolling robot

Tafrishi, S. A., Svinin, M., Esmaeilzadeh, E. & Yamamoto, M., Aug 1 2019, In : Journal of Mechanisms and Robotics. 11, 4, 041010.

Research output: Contribution to journalArticle

Robots
Fluids
Pipe
Torque motors
Mobile robots

Design and control of a power-assist system for pedal operation

Fujita, T., Kiguchi, K., Yabunaka, S., Takeda, Y. & Hara, T., Jan 1 2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 651-654 4 p.

Research output: Contribution to journalArticle

Railroad cars

Detection Improvement of Unburned Carbon Content in Fly Ash Flow Using LIBS with a Two-Stage Cyclone Measurement System

Wang, Z., Liu, R., Deguchi, Y., Tanaka, S., Tainaka, K., Tanno, K., Watanabe, H., Yan, J. & Liu, J., Aug 15 2019, In : Energy and Fuels. 33, 8, p. 7805-7812 8 p.

Research output: Contribution to journalArticle

Coal Ash
Laser induced breakdown spectroscopy
Fly ash
Carbon
Plasmas

Detection of hydrogen effusion before, during, and after martensitic transformation: Example of multiphase transformation-induced plasticity steel

Koyama, M., Yamasaki, D., Ikeda, A., Hojo, T., Akiyama, E., Takai, K. & Tsuzaki, K., Oct 4 2019, In : International Journal of Hydrogen Energy. 44, 47, p. 26028-26035 8 p.

Research output: Contribution to journalArticle

Martensitic transformations
martensitic transformation
plastic properties
Plasticity
steels
Open Access
Shock waves
Hydrophones
Cavitation
Needles

Development of carbon nanotube/rubber composite materials with excellent high pressure hydrogen characteristics

Takeyama, Y., Ueno, M., Uejima, M., Fujiwara, H. & Nishimura, S., Jan 1 2019, In : KOBUNSHI RONBUNSHU. 76, 4, p. 288-296 9 p.

Research output: Contribution to journalArticle

Open Access
High pressure engineering
Carbon Nanotubes
Rubber
Glass ceramics
Polymer blends
3 Citations (Scopus)

Development of paper-structured catalyst for application to direct internal reforming solid oxide fuel cell fueled by biogas

Nguyen, T. G. H., Sakamoto, M., Uchida, T., Doan, D. C. T., Dang, M. C., Tu, P. H., Sasaki, K. & Shiratori, Y., Apr 23 2019, In : International Journal of Hydrogen Energy. 44, 21, p. 10484-10497 14 p.

Research output: Contribution to journalArticle

Biogas
solid oxide fuel cells
Reforming reactions
Solid oxide fuel cells (SOFC)
catalysts

Drop Evaporation on Rough Hot-Spots: Effect of Wetting Modes

Zhang, H., Kita, Y., Zhang, D., Nagayama, G., Takata, Y., Sefiane, K. & Askounis, A., Jan 1 2019, (Accepted/In press) In : Heat Transfer Engineering.

Research output: Contribution to journalArticle

wetting
Wetting
Evaporation
evaporation
cooling
1 Citation (Scopus)

Dropwise Condensation on Multiscale Bioinspired Metallic Surfaces with Nanofeatures

Orejon, D., Askounis, A., Takata, Y. & Attinger, D., Jul 10 2019, In : ACS Applied Materials and Interfaces. 11, 27, p. 24735-24750 16 p.

Research output: Contribution to journalArticle

Condensation
Surface roughness
Coatings
Wetting
Adhesion
Open Access
Electron diffraction
Plastic deformation
plastics
Imaging techniques
Electrons
stress intensity factors
Steel
Stress Intensity Factor
Stress intensity factors
Crack closure
Tooth Socket
Tooth Extraction
Bone and Bones
Injections
Osteoblasts
1 Citation (Scopus)

Effect of Copper Addition on Precipitation Behavior near Grain Boundary in AlZnMg Alloy

Matsuda, K., Yasumoto, T., Bendo, A., Tsuchiya, T., Lee, S., Nishimura, K., Nunomura, N., Marioara, C. D., Levik, A., Holmestad, R., Toda, H., Yamaguchi, M., Ikeda, K. I., Homma, T. & Ikeno, S., Jan 1 2019, In : Materials Transactions. 60, 8, p. 1688-1696 9 p.

Research output: Contribution to journalArticle

Open Access
Precipitates
Copper
precipitates
Grain boundaries
hardness
1 Citation (Scopus)

Effect of defects on the fatigue limit of Ni-based superalloy 718 with different grain sizes

Kevinsanny, Okazaki, S., Takakuwa, O., Ogawa, Y., Okita, K., Funakoshi, Y., Yamabe, J., Matsuoka, S. & Matsunaga, H., May 1 2019, In : Fatigue and Fracture of Engineering Materials and Structures. 42, 5, p. 1203-1213 11 p.

Research output: Contribution to journalArticle

Superalloys
Fatigue of materials
Defects
Cracks
Microstructure
Coal combustion
Fuel burners
Turbulent flow
Reaction rates
Computational fluid dynamics
boiling
Boiling liquids
Heat flux
heat flux
Heating

Effect of Hydrogen on the Substructure of Lenticular Martensite in Fe-31Ni Alloy

Shibata, A., Enoki, M., Saji, N., Tai, H., Koyama, M., Ohtani, H., Tsuji, N. & Tsuzaki, K., Sep 15 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 9, p. 4027-4036 10 p.

Research output: Contribution to journalArticle

martensite
substructures
Martensite
Hydrogen
hydrogen
Open Access
Electrolysis
Two phase flow
Electrolytes
Numerical analysis
Polymers

Effects of 3D microstructural distribution on short crack growth behavior in two bimodal Ti–6Al–4V alloys

Hassanipour, M., Watanabe, S., Hirayama, K., Toda, H., Uesugi, K. & Takeuchi, A., Oct 24 2019, In : Materials Science and Engineering A. 766, 138264.

Research output: Contribution to journalArticle

short cracks
Crack propagation
Cracks
cracks
microstructure

Effects of changes in gas type and partial pressure on chemical mechanical polishing property of Si substrate

Yin, T., Kitamura, K., Doi, T., Kurokawa, S., Zhou, Z. & Feng, K., Jan 1 2019, In : ECS Journal of Solid State Science and Technology. 8, 4, p. P293-P297

Research output: Contribution to journalArticle

Chemical mechanical polishing
Partial pressure
Gases
Polishing
Cytidine Monophosphate
1 Citation (Scopus)

Emergence of Rapid Oxygen Surface Exchange Kinetics during in Situ Crystallization of Mixed Conducting Thin Film Oxides

Chen, T., Harrington, G. F., Masood, J., Sasaki, K. & Perry, N. H., Mar 6 2019, In : ACS Applied Materials and Interfaces. 11, 9, p. 9102-9116 15 p.

Research output: Contribution to journalArticle

Crystallization
Oxides
Light transmission
Oxygen
Thin films
1 Citation (Scopus)

Enhanced pool boiling of ethanol on wettability-patterned surfaces

Shen, B., Hamazaki, T., Ma, W., Iwata, N., Hidaka, S., Takahara, A., Takahashi, K. & Takata, Y., Feb 25 2019, In : Applied Thermal Engineering. 149, p. 325-331 7 p.

Research output: Contribution to journalArticle

Boiling liquids
Wetting
Ethanol
Nucleate boiling
Boiling point

Enhancement of hydrogen embrittlement resistance of Fe-Mn-C twinning-induced plasticity steel by partial recrystallization technique

Park, T. M., Kim, M. T., Baik, K. H., Koyama, M. & Han, J., May 1 2019, In : Materials Characterization. 151, p. 221-226 6 p.

Research output: Contribution to journalArticle

hydrogen embrittlement
Hydrogen embrittlement
Steel
Twinning
twinning
1 Citation (Scopus)

Evaluation of fatigue life and fatigue limit of circumferentially-notched Type 304 stainless steel in air and hydrogen gas based on crack-growth property and cyclic stress-strain response

Nagaishi, N., Yoshikawa, M., Okazaki, S., Yamabe, J., Yoshida, F. & Matsunaga, H., Jun 15 2019, In : Engineering Fracture Mechanics. 215, p. 164-177 14 p.

Research output: Contribution to journalArticle

Stainless Steel
Hydrogen
Crack propagation
Stainless steel
Gases