Division of Renewable Energy Dynamics

Research Output 1980 2020

Filter
Paper
2018

Power module concepts for innovative reliable nitride based power devices and applications - The EU public funded project ‘InRel-NPower‘-

Rittner, M., Kessler, U., Araujo, S., Mansfeld, S., Naundorf, J., Kriegel, K., Schulz, M., Miyake, H., Kangawa, Y. & Meneghesso, G., Jan 1 2018.

Research output: Contribution to conferencePaper

Nitrides
Electric potential
Inductance
Semiconductor materials
Electric commutation
Open Access
2017

A new design of end-tab for the tensile testing of unidirectional thermoplastic composites CF/PA6

Tahir, M. M., Wang, W. X. & Matsubara, T., Jan 1 2017.

Research output: Contribution to conferencePaper

Tensile testing
Polyamides
Thermoplastics
Carbon fibers
Composite materials

Simulation on damage in quasi-isotropic unidirectionally arrayed chopped strands laminates under open-hole tension

Hu, J. F., Ling, X., Li, H. & Wang, W. X., Jan 1 2017.

Research output: Contribution to conferencePaper

Laminates
Carbon fiber reinforced plastics
Fibers
Stiffness
Formability

Three-dimensional simulation of pseudo-ductile behavior of angle-ply and cross angle-ply laminates

Deng, X., Wang, W. X. & Matsubara, T., Jan 1 2017.

Research output: Contribution to conferencePaper

Laminates
Carbon fibers
Polymers
Fiber reinforced materials
Finite element method
2015

Aerodynamic analysis of clustered, diffuser-augmented turbines

Goeltenbott, U., Ohya, Y., Karasudani, T., Yoshida, S. & Jamieson, P., Jan 1 2015.

Research output: Contribution to conferencePaper

Aerodynamics
Turbines
Lenses
Rotors
Flow patterns

Airflow evaluation of wind farm site over complex terrain using LES turbulence model

Ohto, H., Uchida, T., Taniyama, Y. & Osako, T., Jan 1 2015.

Research output: Contribution to conferencePaper

Turbulence models
Farms
Computational fluid dynamics
Turbulence
Wind tunnels

Effects of specimen width on the tensile strength of aligned short-carbon-fiber reinforced epoxy composite laminates

Li, H., Wang, W. X., Matsubara, T., Xue, J. & Luo, D., Jan 1 2015.

Research output: Contribution to conferencePaper

Carbon fibers
Laminates
Tensile strength
Composite materials
Fibers
1 Citation (Scopus)

Improvement of power generation of the wind solar tower

Wataka, M., Ohya, Y., Karasudani, T. & Uchida, T., Jan 1 2015.

Research output: Contribution to conferencePaper

Solar wind
Towers
Power generation
Solar radiation
Roofs

Wind resource evaluation for optimizing wind turbine placement on complex terrain

Tanaka, S., Taniyama, Y., Inomata, A., Hashiba, Y. & Uchida, T., Jan 1 2015.

Research output: Contribution to conferencePaper

Wind turbines
Computational fluid dynamics
Farms
Turbulence models
2013

Effects of the cure pressure on interlaminar shear strength of CFRP-steel hybrid laminate cured by hot pressing for a short time

Matsubara, T., Wang, W. X., Takao, Y., Yasuda, K. & Hayashi, R., Jan 1 2013, p. 5508-5516. 9 p.

Research output: Contribution to conferencePaper

Carbon fiber reinforced plastics
Thermal shock
Hot pressing
Shear strength
Laminates
2011

Mechanical properties of unidirectional arrayed chopped strands (UACS) with different slit patterns

Li, H., Wang, W. X., Takao, Y. & Matsubara, T., Dec 1 2011.

Research output: Contribution to conferencePaper

Failure modes
Mechanical properties
2008
1 Citation (Scopus)

Development of galvanic corrosion resistant carbon fiber aluminum laminates based on nanocomposite coating

Harita, Y., Wang, W. X., Takao, Y., Matsubara, T., Baba, S., Higashijima, M. & Kashima, I., Dec 1 2008.

Research output: Contribution to conferencePaper

Aluminum
Carbon fibers
Laminates
Nanocomposites
Metals
2007
25 Citations (Scopus)

Numerical and experimental studies on three-dimensional water on deck with a modified wigley model

Hu, C. & Kashiwagi, M., Dec 1 2007.

Research output: Contribution to conferencePaper

draft
water
towing
dams
wave interaction
2006

Intermittent bursting of turbulence in a stable boundary layer with low-level jet

Ohya, Y., Nakamura, R. & Uchida, T., Dec 1 2006.

Research output: Contribution to conferencePaper

Boundary layers
Turbulence
boundary layer
turbulence
2005
10 Citations (Scopus)

Water entry and exit of a horizontal circular cylinder

Zhu, X., Faltinsen, O. M. & Hu, C., Nov 21 2005, p. 647-658. 12 p.

Research output: Contribution to conferencePaper

Circular cylinders
Water
Finite difference method
Numerical methods
Interpolation
2003
2 Citations (Scopus)

Development of Two-Way Diffuser for Tidal Energy Conversion System

Shiomi, N., Setoguchi, T., Kinoue, Y., Kaneko, K. & Ohya, Y., Dec 1 2003, p. 304-309. 6 p.

Research output: Contribution to conferencePaper

Energy conversion
Wind turbines
Turbines
Velocity distribution
Water
2 Citations (Scopus)

Numerical Simulation of Non-Linear Free Surface Wave Generation by CIP Method and Its Applications

Hu, C., Kashiwagi, M. & Momoki, T., Dec 1 2003, p. 1639-1644. 6 p.

Research output: Contribution to conferencePaper

Surface waves
Interpolation
Computer simulation
Potential flow
Finite difference method
2002
3 Citations (Scopus)

A numerical analysis of violent free surface flow by particle method

Naito, S. & Makoto, S., Dec 1 2002.

Research output: Contribution to conferencePaper

Marine engineering
free surface flow
Liquid sloshing
Numerical analysis
floating body
1997
1 Citation (Scopus)

Ecohydrodynamic model for environmental assessment of a mega-float in a bay

Kyozuka, Y., Hu, C., Hasemi, H., Nakagawa, H. & Hikai, A., Jan 1 1997, p. 31-38. 8 p.

Research output: Contribution to conferencePaper

Aquatic ecosystems
Hydrodynamics
Plankton
Biological materials
Nutrients

Numerical simulation of flow and density field of Kagoshima Bay in the summer

Kyozuka, Y., Hu, C. & Iwakiri, N., Jan 1 1997, p. 587-594. 8 p.

Research output: Contribution to conferencePaper

Computer simulation
Finite difference method
Topography
Heat flux
Temperature