Research Output 1986 2020

Conference contribution
6 Citations (Scopus)

Aerodynamic design for wind-lens turbine using optimization technique

Oka, N., Furukawa, M., Yamada, K. & Kido, K., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT02A009. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lenses
Aerodynamics
Turbines
Rotors
Viscous flow

Aerodynamic performances and flow fields of pareto optimal solutions in an aerodynamic design of a wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Oka, A. & Kurokawa, Y., Jan 1 2015, Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lenses
Flow fields
Aerodynamics
Turbines
Wind turbines
3 Citations (Scopus)

Air/water two-phase flow performance of contra-rotating axial flow pump and rotational speed control of rear rotor

Shigemitsu, T., Watanabe, S., Furukawa, A. & Okuma, K., Dec 20 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Symposia, FEDSM2005. p. 1069-1074 6 p. FEDSM2005-77002. (Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference; vol. 1 PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Speed control
Two phase flow
Rotors
Pumps
3 Citations (Scopus)

Air/water two-phase flow performance of contra-rotating axial flow pump and rotational speed control of rear rotor

Shigemitsu, T., Watanabe, S., Furukawa, A. & Okuma, K., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 912-917 6 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Speed control
Two phase flow
Rotors
Pumps

Analysis of thermodynamic effects on cavitation instabilities

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., Dec 1 2006, Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM2006. p. 139-146 8 p. (Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM2006; vol. 2 FORUMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Surges (fluid)
Cryogenics
Fluids

Analysis of thermodynamic effects on cavitation instabilities

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., 2006, 2006 ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006. Vol. 2006.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Surges (fluid)
Cryogenics
Fluids
6 Citations (Scopus)

An explanation for flow features of spike-type stall inception in an axial compressor rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 2663-2675 13 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Tornadoes
Vortex flow
Flow structure
3 Citations (Scopus)

A study on back flow structure in a 2-bladed helical inducer at a partial flow rate

Watanabe, S., Inoue, N., Ishizaka, K., Furukawa, A. & Kim, J. H., 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART A ed. Vol. 1. p. 267-275 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow structure
Flow rate
Cavitation
Flow fields
Surges (fluid)

A zonal approach for Navier-stokes computations of compressible cascade flow fields using a tvd finite volume method

Furukawa, M., Yamasaki, M. & Inoue, M., Jan 1 1990, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite volume method
Flow fields
Fluxes
Viscous flow
Cascades (fluid mechanics)

Behavior of three-dimensional boundary layers in a radial inflow turbine scroll

Nara, K., Furukawa, M. & Inoue, M., Jan 1 1993, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers, (ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition, GT 1993; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boundary layers
Turbines
Secondary flow
Nozzles
Momentum

Circulation of a vortex ring generated by pulsating jet flow

Akagi, F., Kawabata, K., Ando, Y., Yamaguchi, S. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 2911-2920 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vortex flow
Strouhal number
Measurement errors
Momentum
9 Citations (Scopus)

Comparative studies on short and long length-scale stall cell propagating in an axial compressor rotor

Inoue, M., Kuroumaru, M., Tanino, T., Yoshida, S. & Furukawa, M., Jan 1 2000, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Pressure distribution
Vortex flow
Pressure transducers
11 Citations (Scopus)

Comparative study on tip clearance flow fields in two types of transonic centrifugal compressor impeller with splitter blades

Yamada, K., Tamagawa, Y., Fukushima, H., Furukawa, M., Ibaraki, S. & Iwakiri, K. I., Dec 1 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. PARTS A, B, AND C ed. p. 2053-2063 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Turbomachine blades
Compressors
Flow fields
Vortex flow
5 Citations (Scopus)

Controlled-endwall-flow blading for multistage axial compressor rotor

Inoue, M., Kuroumaru, M., Furukawa, M., Kinoue, Y., Tanino, T., Maeda, S. & Okuno, K., Jan 1 1997, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Turbomachine blades
Cascades (fluid mechanics)
Boundary layer flow
4 Citations (Scopus)

Design of a propeller fan using 3-D Inverse Design Method and CFD for high efficiency and low aerodynamic noise

Okamoto, H., Goto, A. & Furukawa, M., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. p. 165-171 7 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellers
Fans
Aerodynamics
Computational fluid dynamics
Vortex flow
5 Citations (Scopus)

Detached eddy simulation of unsteady flow field and prediction of aerodynamic sound in a half-ducted propeller fan

Kusano, K., Jeong, J. H., Yamada, K. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 713-722 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellers
Unsteady flow
Fans
Flow fields
Aerodynamics
2 Citations (Scopus)

Detailed studies on separated boundary layers over low-pressure turbine airfoils under several high lift conditions: Effect of freesteam turbulence

Funazaki, K. I., Yamada, K., Tanaka, N. & Chiba, Y., Dec 1 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. p. 1013-1027 15 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Airfoils
Boundary layers
Turbulence
Turbines
Cascades (fluid mechanics)
3 Citations (Scopus)

Development of advanced centrifugal compressor for turbocharger, applying control of internal unsteady flow structure

Ebisu, M., Shiraishi, T., Tomita, I. & Furukawa, M., Jan 1 2012, Institution of Mechanical Engineers - 10th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Limited, p. 135-144 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow structure
Unsteady flow
Compressors
Exhaust gases
3 Citations (Scopus)

Development of air/water two-phase flow centrifugal pump and its operating characteristics

Furukawa, A., Okuma, K., Ohshita, S. & Watanabe, S., Dec 1 2003, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 1, part B, Forums. Ogut, A., Tsuji, Y., Kawahashi, M., Ogut, A., Tsuji, Y. & Kawahashi, M. (eds.). p. 1413-1418 6 p. (Proceedings of the ASME/JSME Joint Fluids Engineering Conference; vol. 1 B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Two phase flow
Flow rate
Water
Pumps
5 Citations (Scopus)

Development of dual-layer PSP/TSP system for pressure and temperature measurements in low-speed flow field

Moon, K. J., Mori, H., Ambe, Y. & Kawabata, H., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 2767-2772 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pressure measurement
Paint
Temperature measurement
Flow fields
Temperature
4 Citations (Scopus)

Diagnosis of three-dimensional transonic flow fields with laser-induced iodine fluorescence

Inoue, M., Masuda, M., Furukawa, M. & Muraishi, T., 1995, Experimental and Numerical Flow Visualization. Khalighi, B., Kobayashi, T., Fruman, D. H., Braun, M. J., Freitas, C. J. & et al, A. (eds.). ASME, Vol. 218. p. 163-170 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transonic flow
Iodine
Flow fields
Fluorescence
Shock waves
1 Citation (Scopus)

Direct numerical simulation of turbulent flow and aeroacoustic fields around an airfoil using lattice boltzmann method

Kusano, K., Yamada, K., Furukawa, M. & Moon, K. J., Jan 1 2016, Symposia: Turbomachinery Flow Simulation and Optimization; Applications in CFD; Bio-Inspired and Bio-Medical Fluid Mechanics; CFD Verification and Validation; Development and Applications of Immersed Boundary Methods; DNS, LES and Hybrid RANS/LES Methods; Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Active Fluid Dynamics and Flow Control - Theory, Experiments and Implementation. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aeroacoustics
Direct numerical simulation
Airfoils
Turbulent flow
Boundary layers

Effect of leading edge sweep on cavitation performance of two-bladed flat plate inducer

Igoshi, T., Uchinono, Y., Koroitamana, E., Ishizaka, K., Watanabe, S. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 289-296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Flow rate
Surges (fluid)
Flow measurement
Pressure measurement
7 Citations (Scopus)

Effect of wake passing on unsteady aerodynamic performance in a turbine stage

Yamada, K., Hiroma, K., Hirano, Y., Funazaki, K., Tsutsumi, M. & Matsuo, A., Nov 15 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 757-767 11 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aerodynamics
Turbines
Stators
Rotors
Vortex flow
1 Citation (Scopus)

Effects of flow path height of impeller exit and diffuser on flow fields in a transonic centrifugal compressor

Tomita, I., Ibaraki, S., Wakashima, K., Furukawa, M., Yamada, K. & Kanzaki, D., Jan 1 2015, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow fields
Electric inductors
Unsteady flow
Momentum

Effects of stream surface inclination on tip leakage flow fields in compressor rotors

Furukawa, M., Saiki, K., Nagayoshi, K., Kuroumaru, M. & Inoue, M., Jan 1 1997, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Flow fields
Vortex flow
Rotors
Axial flow
25 Citations (Scopus)

Effects of tip clearance on the stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Dec 17 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. GT2013-95479. (Proceedings of the ASME Turbo Expo; vol. 6 C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Vortex flow
Rotors
Flow fields
Tornadoes

Effects of upstream bend on aerodynamic performance of a transonic centrifugal compressor

Yamada, K., Furukawa, M., Arai, H. & Ito, S., Jan 1 2019, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Aerodynamics
Pipe
Compressors
Flow rate
3 Citations (Scopus)

Evolution of reverse flow in a transonic centrifugal compressor at near-surge

Yamada, K., Furukawa, M., Arai, H. & Kanzaki, D., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow fields
Compressors
Unsteady flow
1 Citation (Scopus)

Experimental and numerical analysis of high heat transfer phenomenon in minichannel gaseous cooling

Hara, K., Furukawa, M. & Akihiro, N., 2006, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006. Vol. 2006 A. p. 625-634 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical analysis
Heat transfer
Cooling
Pressure gradient
Turbulence models
5 Citations (Scopus)

Experimental and numerical investigations of wake passing effects upon aerodynamic performance of a LP turbine linear cascade with variable solidity

Funazaki, K. I., Yamada, K., Ono, T., Segawa, K. I., Hamazaki, H., Takahashi, A. & Tanimitsu, H., Nov 15 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 637-648 12 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cascades (fluid mechanics)
Aerodynamics
Turbines
Airfoils
Pneumatics
4 Citations (Scopus)

Experimental investigation of blade rows interactions in contrarotating axial flow pump

Cao, L., Honda, H., Yoshimura, H., Watanabe, S. & Furukawa, A., Jan 1 2014, Symposia: Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Flow Manipulation and Active Control: Theory, Experiments and Implementation; Multiscale Methods for Multiphase Flow; Noninvasive Measurements in Single and Multiphase Flows. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Turbomachine blades
Rotors
Pumps
Pressure measurement
1 Citation (Scopus)

Experimental investigation of heat transfer in square and circular minichannel air flow for wide range of pressure ratio

Hara, K., Furukawa, M. & Akihiro, N., Nov 21 2005, Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005. p. 381-388 8 p. ICMM2005-75184. (Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005; vol. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer coefficients
Heat transfer
Air
Pipe flow
Copper

Experimental investigation on cavitation performance of torque converter using transparent model

Katayama, Y., Hosoi, Y., Fukuda, Y., Watanabe, S., Tsuda, S. I., Mori, Y. & Ito, K., Jan 1 2019, Fluid Applications and Systems. American Society of Mechanical Engineers (ASME), 4906. (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 3B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torque converters
Cavitation
Turbines
Torque
Pumps
2 Citations (Scopus)

Experimental investigation on diffuser rotating stall in a three-stage centrifugal pump

Takamine, T., Watanabe, S., Furukawa, D., Watanabe, H. & Miyagawa, K., Jan 1 2017, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Rotors
Flow rate
Impellers
Channel flow
10 Citations (Scopus)

Experimental studies on aerodynamic performance and unsteady flow behaviors of a single turbine stage with variable rotor-stator axial gap: Comparisons with time-accurate numerical simulation

Funazaki, K. I., Yamada, K., Kikuchi, M. & Sato, H., Sep 25 2007, Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air. p. 703-711 9 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Unsteady flow
Stators
Aerodynamics
Turbines
Rotors

Experimental study of cavitating flow in flat plate cascades with/without tip clearance

Watanabe, S., Suefuji, T., Ikeda, A. & Furukawa, A., 2010, 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010, ISROMAC-13. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Unsteady flow
High speed cameras
Video cameras
Cavitation
Vortex flow
2 Citations (Scopus)

Experimental study of unsteady cavitating flow around flat plate hydrofoil with/without tip clearance

Watanabe, S., Suefuji, T., Ikeda, A., Furukawa, A. & Nishii, K., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. p. 387-391 5 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrofoils
Unsteady flow
High speed cameras
Video cameras
Cavitation
1 Citation (Scopus)

Experimental study on leakage flow in labyrinth seals with asymmetric geometries

Nishii, K., Furukawa, A., Watanabe, S. & Miyake, K., Nov 25 2010, 10th Asian International Conference on Fluid Machinery, AICFM. Vol. 1225. p. 91-99 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

labyrinth seals
leakage
convexity
geometry
internal flow
1 Citation (Scopus)

Experimental stydy on performance of darrieus-type open hydroturbine with inlet nozzle in low downstream water level conditions

Hirowatari, K., Shimokawa, K., Iwamoto, S., Okuma, K., Watanabe, S., Matsusita, D. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 1851-1859 9 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Water levels
Nozzles
Turbines
Intake systems
Torque

Flow measurement at partial flow rate with LDV around rear rotor of contra-rotating axial flow pump

Yamashita, S., Watanabe, S., Okuma, K., Shirasawa, K. & Furukawa, A., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 909-914 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

axial flow pumps
Axial flow
flow measurement
Flow measurement
rotors
3 Citations (Scopus)

Flow structure and unsteady behavior of hub-corner separation in a stator cascade of a multi-stage transonic axial compressor

Saito, S., Yamada, K., Furukawa, M., Watanabe, K., Matsuoka, A. & Niwa, N., Jan 1 2018, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2A-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow structure
Stators
Compressors
Flow fields
Vortex flow
14 Citations (Scopus)

Influences of axial gap between blade rows on secondary flows and aerodynamic performance in a turbine stage

Yamada, K., Funazaki, K., Kikuchi, M. & Sato, H., Dec 1 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. p. 1039-1049 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Secondary flow
Aerodynamics
Turbines
Flow fields
Stators

Influences of impeller diameter and diffuser blades on air-water two-phase flow performance of centrifugal pump

Matsushita, N., Furukawa, A., Okuma, K. & Watanabe, S., Dec 19 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Forums, FEDSM2005. p. 59-64 6 p. FEDSM2005-77388. (Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Two phase flow
Flow rate
Air
Water
1 Citation (Scopus)

Influences of impeller diameter and diffuser blades on air-water two-phase flow performance of centrifugal pump

Matsushita, N., Furukawa, A., Okuma, K. & Watanabe, S., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 1704-1709 6 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Two phase flow
Flow rate
Air
Water
2 Citations (Scopus)

Large-scale des analysis of stall inception process in a multi-stage axial flow compressor

Yamada, K., Furukawa, M., Tamura, Y., Saito, S., Matsuoka, A. & Nakayama, K., Jan 1 2016, Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 2D-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial-flow compressors
Compressors
Stators
Gas turbines
Unsteady flow
9 Citations (Scopus)

Large-scale des analysis of unsteady flow field in a multi-stage axial flow compreßor at off-design condition using k computer

Yamada, K., Furukawa, M., Nakakido, S., Matsuoka, A. & Nakayama, K., Jan 1 2015, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Unsteady flow
Flow fields
Boundary conditions
Gas turbines

Mechanisms and quantitative evaluation of flow loss generation in a multi-stage transonic axial compressor

Saito, S., Furukawa, M., Yamada, K., Watanabe, K., Matsuoka, A. & Niwa, N., Jan 1 2019, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Vortex flow
Flow fields
Boundary layers
Shock waves
2 Citations (Scopus)

Numerical/experimental investigations on inlet back flow in a helical inducer in partial flow conditions

Watanabe, S., Ishizaka, K., Kim, J. H. & Furukawa, A., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 893-898 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

helical inducers
Surges (fluid)
cavitation flow
Cavitation
flow velocity

Numerical analysis of unsteady three-dimensional flow in a propeller fan using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Jan 1 2015, FAN 2015 - International Conference on Fan Noise, Technology and Numerical Methods. Institution of Mechanical Engineers, Vol. 2015-April.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

propeller fans
three dimensional flow
numerical analysis
simulation
computational grids