Research Output

Paper

A fundamental study of disappearance phenomenon of partial cavitation on the NACA 16012 hydrofoil

Oodaira, Y., Tsuru, W., Watanabe, S. & Iga, Y., Jan 1 2017.

Research output: Contribution to conferencePaper

Cavitation simulation of automotive torque converter using a homogeneous cavitation model

Tsutsumi, K., Watanabe, S., Tsuda, S. & Yamaguchi, T., Jan 1 2019.

Research output: Contribution to conferencePaper

Cavitation simulation using a new simple homogeneous cavitation model

Watanabe, S., Tsuru, W., Yamamoto, Y. & Tsuda, S. I., Jan 1 2019.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

CFD analysis of axial thrust in three stages centrifugal pump at design and partload conditions

Hiroyoshi, W., Watanabe, S., Tetsuya, Y. & Yoshinori, H., Jan 1 2015.

Research output: Contribution to conferencePaper

6 Citations (Scopus)

Effect of inlet nozzle shape on performance of darrieus-type hydro-turbine operated in small open water channel

Kazuhiko, N., Daisuke, M., Watanabe, S., Tsuda, S. & Akinori, F., Jan 1 2015.

Research output: Contribution to conferencePaper

Effect of tip clearance on stall evolution process in a low-speed axial compressor stage

Inoue, M., Yoshida, S., Yamada, K., Kuroumaru, M., Minami, T. & Furukawa, M., Dec 22 2004, p. 385-394. 10 p.

Research output: Contribution to conferencePaper

35 Citations (Scopus)

Effects of dissolved gas on unsteady cavitating flow around a clark y-11.7% hydrofoil

Daido, H., Watanabe, S. & Tsuda, S., Jan 1 2015.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Large-scale numerical simulation of unsteady flow field in a half-ducted propeller fan using lattice Boltzmann method

Yamada, K., Kusano, K. & Furukawa, M., Jan 1 2015.

Research output: Contribution to conferencePaper

Measurements of axial and radial thrust forces working on a three-stages centrifugal pump rotor

Yamashita, T., Watanabe, S., Hara, Y., Watanabe, H. & Miyagawa, K., Jan 1 2015.

Research output: Contribution to conferencePaper

8 Citations (Scopus)

Measurement technique for unsteady low-speed flow fields using poly(TMSP)-based pressure sensitive paint

Mori, H., Maeda, K., Furukawa, M. & Akiyoshi, M., Jan 1 2015.

Research output: Contribution to conferencePaper

Numerical investigation on performance of contra-rotating axial flow pump with different rear rotor design

Honda, H., Cao, L., Watanabe, S., Tsuda, S. I. & Furukawa, A., Jan 1 2015.

Research output: Contribution to conferencePaper

Numerical simulation of three-dimensional viscous flow in diagonal flow impeller

Furukawa, M., Saiki, K. & Inoue, M., Dec 1 1995, p. 29-36. 8 p.

Research output: Contribution to conferencePaper

18 Citations (Scopus)

Optimum aerodynamic design of centrifugal comPressor using a genetic algorithm and an inverse method based on meridional viscous flow analysis

Itou, S., Oka, N., Furukawa, M., Yamada, K., Ibaraki, S., Iwakiri, K. & Hayashi, Y., Jan 1 2017.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Physics of tip clearance flow in turbomachinery

Inoue, M. & Furukawa, M., Jan 1 2002, p. 777-789. 13 p.

Research output: Contribution to conferencePaper

27 Citations (Scopus)

Studies on Effects of Periodic Wake Passing upon a Blade Leading Edge Separation Bubble: Experimental Investigation using a Simple Leading Edge Model

Funazaki, K., Yamada, K. & Kato, Y., Dec 1 2003, p. 761-769. 9 p.

Research output: Contribution to conferencePaper

Unsteady three-dimensional flow phenomena due to breakdown of tip leakage vortex in a transonic axial compressor rotor

Yamada, K., Furukawa, M., Nakano, T., Inoue, M. & Funazaki, K., Dec 22 2004, p. 515-526. 12 p.

Research output: Contribution to conferencePaper

48 Citations (Scopus)
Conference contribution

Aerodynamic design for wind-lens turbine using optimization technique

Oka, N., Furukawa, M., Yamada, K. & Kido, K., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT02A009. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Aerodynamic performances and flow fields of pareto optimal solutions in an aerodynamic design of a wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Oka, A. & Kurokawa, Y., Jan 1 2015, Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Air/water two-phase flow performance of contra-rotating axial flow pump and rotational speed control of rear rotor

Shigemitsu, T., Watanabe, S., Furukawa, A. & Okuma, K., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 912-917 6 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Air/water two-phase flow performance of contra-rotating axial flow pump and rotational speed control of rear rotor

Shigemitsu, T., Watanabe, S., Furukawa, A. & Okuma, K., Dec 20 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Symposia, FEDSM2005. p. 1069-1074 6 p. FEDSM2005-77002. (Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference; vol. 1 PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Analysis of thermodynamic effects on cavitation instabilities

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., Dec 1 2006, Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM2006. p. 139-146 8 p. (Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM2006; vol. 2 FORUMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of thermodynamic effects on cavitation instabilities

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., 2006, 2006 ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006. Vol. 2006.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An explanation for flow features of spike-type stall inception in an axial compressor rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 2663-2675 13 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

A study on back flow structure in a 2-bladed helical inducer at a partial flow rate

Watanabe, S., Inoue, N., Ishizaka, K., Furukawa, A. & Kim, J. H., 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART A ed. Vol. 1. p. 267-275 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

A zonal approach for Navier-stokes computations of compressible cascade flow fields using a tvd finite volume method

Furukawa, M., Yamasaki, M. & Inoue, M., Jan 1 1990, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Behavior of three-dimensional boundary layers in a radial inflow turbine scroll

Nara, K., Furukawa, M. & Inoue, M., Jan 1 1993, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers, (ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition, GT 1993; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Circulation of a vortex ring generated by pulsating jet flow

Akagi, F., Kawabata, K., Ando, Y., Yamaguchi, S. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 2911-2920 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparative studies on short and long length-scale stall cell propagating in an axial compressor rotor

Inoue, M., Kuroumaru, M., Tanino, T., Yoshida, S. & Furukawa, M., Jan 1 2000, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Comparative study on tip clearance flow fields in two types of transonic centrifugal compressor impeller with splitter blades

Yamada, K., Tamagawa, Y., Fukushima, H., Furukawa, M., Ibaraki, S. & Iwakiri, K. I., Dec 1 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. PARTS A, B, AND C ed. p. 2053-2063 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

Controlled-endwall-flow blading for multistage axial compressor rotor

Inoue, M., Kuroumaru, M., Furukawa, M., Kinoue, Y., Tanino, T., Maeda, S. & Okuno, K., Jan 1 1997, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Design of a propeller fan using 3-D Inverse Design Method and CFD for high efficiency and low aerodynamic noise

Okamoto, H., Goto, A. & Furukawa, M., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. p. 165-171 7 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Detached eddy simulation of unsteady flow field and prediction of aerodynamic sound in a half-ducted propeller fan

Kusano, K., Jeong, J. H., Yamada, K. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 713-722 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Detailed studies on separated boundary layers over low-pressure turbine airfoils under several high lift conditions: Effect of freesteam turbulence

Funazaki, K. I., Yamada, K., Tanaka, N. & Chiba, Y., Dec 1 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. p. 1013-1027 15 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Development of advanced centrifugal compressor for turbocharger, applying control of internal unsteady flow structure

Ebisu, M., Shiraishi, T., Tomita, I. & Furukawa, M., Jan 1 2012, Institution of Mechanical Engineers - 10th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Limited, p. 135-144 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Development of air/water two-phase flow centrifugal pump and its operating characteristics

Furukawa, A., Okuma, K., Ohshita, S. & Watanabe, S., Dec 1 2003, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 1, part B, Forums. Ogut, A., Tsuji, Y., Kawahashi, M., Ogut, A., Tsuji, Y. & Kawahashi, M. (eds.). p. 1413-1418 6 p. (Proceedings of the ASME/JSME Joint Fluids Engineering Conference; vol. 1 B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Development of dual-layer PSP/TSP system for pressure and temperature measurements in low-speed flow field

Moon, K. J., Mori, H., Ambe, Y. & Kawabata, H., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 2767-2772 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Diagnosis of three-dimensional transonic flow fields with laser-induced iodine fluorescence

Inoue, M., Masuda, M., Furukawa, M. & Muraishi, T., 1995, Experimental and Numerical Flow Visualization. Khalighi, B., Kobayashi, T., Fruman, D. H., Braun, M. J., Freitas, C. J. & et al, A. (eds.). ASME, Vol. 218. p. 163-170 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Direct numerical simulation of turbulent flow and aeroacoustic fields around an airfoil using lattice boltzmann method

Kusano, K., Yamada, K., Furukawa, M. & Moon, K. J., Jan 1 2016, Symposia: Turbomachinery Flow Simulation and Optimization; Applications in CFD; Bio-Inspired and Bio-Medical Fluid Mechanics; CFD Verification and Validation; Development and Applications of Immersed Boundary Methods; DNS, LES and Hybrid RANS/LES Methods; Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Active Fluid Dynamics and Flow Control - Theory, Experiments and Implementation. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of leading edge sweep on cavitation performance of two-bladed flat plate inducer

Igoshi, T., Uchinono, Y., Koroitamana, E., Ishizaka, K., Watanabe, S. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 289-296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of wake passing on unsteady aerodynamic performance in a turbine stage

Yamada, K., Hiroma, K., Hirano, Y., Funazaki, K., Tsutsumi, M. & Matsuo, A., Nov 15 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 757-767 11 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Effects of flow path height of impeller exit and diffuser on flow fields in a transonic centrifugal compressor

Tomita, I., Ibaraki, S., Wakashima, K., Furukawa, M., Yamada, K. & Kanzaki, D., Jan 1 2015, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effects of stream surface inclination on tip leakage flow fields in compressor rotors

Furukawa, M., Saiki, K., Nagayoshi, K., Kuroumaru, M. & Inoue, M., Jan 1 1997, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of tip clearance on the stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Dec 17 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. GT2013-95479. (Proceedings of the ASME Turbo Expo; vol. 6 C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

26 Citations (Scopus)

Effects of upstream bend on aerodynamic performance of a transonic centrifugal compressor

Yamada, K., Furukawa, M., Arai, H. & Ito, S., Jan 1 2019, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evolution of reverse flow in a transonic centrifugal compressor at near-surge

Yamada, K., Furukawa, M., Arai, H. & Kanzaki, D., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Experimental and numerical analysis of high heat transfer phenomenon in minichannel gaseous cooling

Hara, K., Furukawa, M. & Akihiro, N., 2006, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006. Vol. 2006 A. p. 625-634 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Experimental and numerical investigations of wake passing effects upon aerodynamic performance of a LP turbine linear cascade with variable solidity

Funazaki, K. I., Yamada, K., Ono, T., Segawa, K. I., Hamazaki, H., Takahashi, A. & Tanimitsu, H., Nov 15 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 637-648 12 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Experimental investigation of blade rows interactions in contrarotating axial flow pump

Cao, L., Honda, H., Yoshimura, H., Watanabe, S. & Furukawa, A., Jan 1 2014, Symposia: Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Flow Manipulation and Active Control: Theory, Experiments and Implementation; Multiscale Methods for Multiphase Flow; Noninvasive Measurements in Single and Multiphase Flows. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)