Research Output

Conference contribution

Effects of upstream bend on aerodynamic performance of a transonic centrifugal compressor

Yamada, K., Furukawa, M., Arai, H. & Ito, S., Jan 1 2019, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evolution of reverse flow in a transonic centrifugal compressor at near-surge

Yamada, K., Furukawa, M., Arai, H. & Kanzaki, D., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Experimental and numerical analysis of high heat transfer phenomenon in minichannel gaseous cooling

Hara, K., Furukawa, M. & Akihiro, N., 2006, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006. Vol. 2006 A. p. 625-634 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Experimental and numerical investigations of wake passing effects upon aerodynamic performance of a LP turbine linear cascade with variable solidity

Funazaki, K. I., Yamada, K., Ono, T., Segawa, K. I., Hamazaki, H., Takahashi, A. & Tanimitsu, H., Nov 15 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 637-648 12 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Experimental investigation of blade rows interactions in contrarotating axial flow pump

Cao, L., Honda, H., Yoshimura, H., Watanabe, S. & Furukawa, A., Jan 1 2014, Symposia: Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Flow Manipulation and Active Control: Theory, Experiments and Implementation; Multiscale Methods for Multiphase Flow; Noninvasive Measurements in Single and Multiphase Flows. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Experimental investigation of heat transfer in square and circular minichannel air flow for wide range of pressure ratio

Hara, K., Furukawa, M. & Akihiro, N., Nov 21 2005, Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005. p. 381-388 8 p. ICMM2005-75184. (Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005; vol. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Experimental investigation on cavitation performance of torque converter using transparent model

Katayama, Y., Hosoi, Y., Fukuda, Y., Watanabe, S., Tsuda, S. I., Mori, Y. & Ito, K., Jan 1 2019, Fluid Applications and Systems. American Society of Mechanical Engineers (ASME), 4906. (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 3B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental investigation on diffuser rotating stall in a three-stage centrifugal pump

Takamine, T., Watanabe, S., Furukawa, D., Watanabe, H. & Miyagawa, K., Jan 1 2017, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Experimental studies on aerodynamic performance and unsteady flow behaviors of a single turbine stage with variable rotor-stator axial gap: Comparisons with time-accurate numerical simulation

Funazaki, K. I., Yamada, K., Kikuchi, M. & Sato, H., Sep 25 2007, Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air. p. 703-711 9 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Experimental study of cavitating flow in flat plate cascades with/without tip clearance

Watanabe, S., Suefuji, T., Ikeda, A. & Furukawa, A., 2010, 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010, ISROMAC-13. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental study of unsteady cavitating flow around flat plate hydrofoil with/without tip clearance

Watanabe, S., Suefuji, T., Ikeda, A., Furukawa, A. & Nishii, K., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. p. 387-391 5 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Experimental study on leakage flow in labyrinth seals with asymmetric geometries

Nishii, K., Furukawa, A., Watanabe, S. & Miyake, K., Nov 25 2010, 10th Asian International Conference on Fluid Machinery, AICFM. Vol. 1225. p. 91-99 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Experimental stydy on performance of darrieus-type open hydroturbine with inlet nozzle in low downstream water level conditions

Hirowatari, K., Shimokawa, K., Iwamoto, S., Okuma, K., Watanabe, S., Matsusita, D. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 1851-1859 9 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Flow measurement at partial flow rate with LDV around rear rotor of contra-rotating axial flow pump

Yamashita, S., Watanabe, S., Okuma, K., Shirasawa, K. & Furukawa, A., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 909-914 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow structure and unsteady behavior of hub-corner separation in a stator cascade of a multi-stage transonic axial compressor

Saito, S., Yamada, K., Furukawa, M., Watanabe, K., Matsuoka, A. & Niwa, N., Jan 1 2018, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2A-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Influences of axial gap between blade rows on secondary flows and aerodynamic performance in a turbine stage

Yamada, K., Funazaki, K., Kikuchi, M. & Sato, H., Dec 1 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. p. 1039-1049 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Citations (Scopus)

Influences of impeller diameter and diffuser blades on air-water two-phase flow performance of centrifugal pump

Matsushita, N., Furukawa, A., Okuma, K. & Watanabe, S., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 1704-1709 6 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Influences of impeller diameter and diffuser blades on air-water two-phase flow performance of centrifugal pump

Matsushita, N., Furukawa, A., Okuma, K. & Watanabe, S., Dec 19 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Forums, FEDSM2005. p. 59-64 6 p. FEDSM2005-77388. (Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Large-scale des analysis of stall inception process in a multi-stage axial flow compressor

Yamada, K., Furukawa, M., Tamura, Y., Saito, S., Matsuoka, A. & Nakayama, K., Jan 1 2016, Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 2D-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Large-scale des analysis of unsteady flow field in a multi-stage axial flow compreßor at off-design condition using k computer

Yamada, K., Furukawa, M., Nakakido, S., Matsuoka, A. & Nakayama, K., Jan 1 2015, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Mechanisms and quantitative evaluation of flow loss generation in a multi-stage transonic axial compressor

Saito, S., Furukawa, M., Yamada, K., Watanabe, K., Matsuoka, A. & Niwa, N., Jan 1 2019, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical/experimental investigations on inlet back flow in a helical inducer in partial flow conditions

Watanabe, S., Ishizaka, K., Kim, J. H. & Furukawa, A., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 893-898 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Numerical analysis of unsteady three-dimensional flow in a propeller fan using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Jan 1 2015, FAN 2015 - International Conference on Fan Noise, Technology and Numerical Methods. Institution of Mechanical Engineers, Vol. 2015-April.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical and experimental studies on separated boundary layers over ultra-high lift low-pressure turbine cascade airfoils with variable solidity: Effects of free-stream turbulence

Funazaki, K. I., Yamada, K., Chiba, Y. & Tanaka, N., Dec 1 2008, 2008 Proceedings of the ASME Turbo Expo: Power for Land, Sea, and Air. PART B ed. (Proceedings of the ASME Turbo Expo; vol. 6, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Numerical investigation of influence of rotor-rotor gap on performances of contra-rotating axial flow pump

Cao, L., Watanabe, S., Furukawa, A. & Wu, D., Jan 1 2015, Symposia. American Society of Mechanical Engineers, (ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, AJKFluids 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical investigation of relation between unsteady behavior of tip leakage vortex and rotating disturbance in a transonic axial compressor rotor

Yamada, K., Funazaki, K. & Sasaki, H., Dec 1 2008, 2008 Proceedings of the ASME Turbo Expo: Power for Land, Sea, and Air. PART A ed. p. 425-436 12 p. (Proceedings of the ASME Turbo Expo; vol. 6, no. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

18 Citations (Scopus)

Numerical investigation of the influence of impeller-diffuser gap (A-and B-GaPs) on unsteady flow in a centrifugal pump at part flows

Takamine, T. & Watanabe, S., Jan 1 2019, Fluid Applications and Systems. American Society of Mechanical Engineers (ASME), 5372. (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 3B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical study of blood flow in the hepatic portion of the inferior vena cava

Matsubara, M., Konishi, K., Watanabe, M., Yamaguchi, S., Watanabe, S. & Hashizume, M., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART A ed. p. 695-698 4 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimum aerodynamic design of centrifugal compressor impeller using an inverse method based on meridional viscous flow analysis

Oka, N., Furukawa, M., Yamada, K., Itou, S., Ibaraki, S., Iwakiri, K. & Hayashi, Y., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Physical explanations of tip leakage flow field in an axial compressor rotor

Inoue, M., Furukawa, M., Saiki, K. & Yamada, K., Jan 1 1998, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Propagation of multiple short length-scale stall cells in an axial compressor rotor

Inoue, M., Kuroumaru, M., Tanino, T. & Furukawa, M., Jan 1 1999, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Short and long length-scale disturbances leading to rotating stall in an axial compressor stage with different stator/rotor gaps

Inoue, M., Kuroumaru, M., Yoshida, S. & Furukawa, M., Jan 1 2001, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Similarity law of air-water two-phase flow performance of centrifugal pump

Matsushita, N., Watanabe, S., Okuma, K., Hasui, T. & Furukawa, A., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 915-920 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Simultaneous optimization of impeller blade loading distribution and meridional geometry for aerodynamic design of centrifugal compressor

Manabe, K., Ito, S., Furukawa, M., Yamada, K., Oka, N., Tomita, I. & Hayashi, Y., Jan 1 2019, Fluid Applications and Systems. American Society of Mechanical Engineers (ASME), 5358. (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 3A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simultaneous optimization of rotor blade and wind-lens for aerodynamic design of wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Kawamitsu, K., Kido, K. & Oka, A., Jan 1 2014, ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 3B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Spectroscopic study of REMPI for rotational temperature measurement in highly rarefied gas flows

Mori, H., Ishida, T., Aoki, Y. & Niimi, T., Aug 30 2001, Rarefied Gas Dynamics: 22nd International Symposium. Bartel, T. J. & Gallis, M. A. (eds.). American Institute of Physics Inc., p. 956-963 8 p. (AIP Conference Proceedings; vol. 585).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Steady analysis of thermodynamic effect of partial cavitation using singularity method

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., Dec 1 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 2161-2167 7 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Steady analysis of thermodynamic effect of partial cavitation using singularity method

Watanabe, S., Hidaka, T., Horiguchi, H., Furukawa, A. & Tsujimoto, Y., 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Forums, FEDSM2005. Vol. 2. p. 567-573 7 p. FEDSM2005-77387

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Suppression of secondary flows in an axial flow turbine rotor with a novel blade design concept

Yamada, K., Furukawa, M., Shibata, T., Nakakido, S. & Oka, N., Jan 1 2014, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Suppression of secondary flows in a transonic centrifugal compressor impeller using an inverse design method based on meridional viscous flow analysis

Ito, S., Okada, S., Kawakami, Y., Manabe, K., Furukawa, M. & Yamada, K., Jan 1 2019, Fluid Applications and Systems. American Society of Mechanical Engineers (ASME), 5319. (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 3A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Temperature compensation for measurement of low-speed internal flow fields using fast-response pressure sensitive paint

Mori, H., Imazeki, T. & Moon, K. J., Jan 1 2019, Fluid Measurement and Instrumentation; Micro and Nano Fluid Dynamics. American Society of Mechanical Engineers (ASME), (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The behavior of tip clearance flow at near-stall condition in a transonic axial compressor rotor

Yamada, K., Funazaki, K. & Furukawa, M., Sep 25 2007, Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air. p. 295-306 12 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

43 Citations (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 735-743 9 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Thermal and dissolved gas effects on cavitation in a 2-D convergent-divergent nozzle flow

Watanabe, S., Enomoto, K., Yamamoto, Y. & Hara, Y., Jan 1 2014, Fora: Cavitation and Multiphase Flow; Fluid Measurements and Instrumentation; Microfluidics; Multiphase Flows: Work in Progress; Fluid-Particle Interactions in Turbulence. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Thermodynamic parameter on cavitation in space inducer

Yoshida, Y., Kikuta, K., Niiyama, K. & Watanabe, S., Dec 1 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th Int. Conference on Nanochannels, Microchannels, and M, FEDSM 2. p. 203-213 11 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

The role of meridional geometry in aerodynamic design of centrifugal compressor

Ito, S., Furukawa, M., Yamada, K., Manabe, K., Oka, N., Tomita, I. & Hayashi, Y., Jan 1 2018, Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

The role of tip leakage vortex breakdown in compressor rotor aerodynamics

Furukawa, M., Inoue, M., Saiki, K. & Yamada, K., Jan 1 1998, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

The role of tip leakage vortex breakdown in flow fields and aerodynamic characteristics of transonic centrifugal compressor impellers

Yamada, K., Furukawa, M., Fukushima, H., Ibaraki, S. & Tomita, I., Dec 1 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011. PARTS A, B, AND C ed. p. 2111-2123 13 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Three-dimensional structure of separated and vortical flow inahalf-ducted propeller fan

Jeong, J. H., Takahashi, K., Iwakiri, K. & Furukawa, M., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. p. 1005-1010 6 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Toward direct numerical simulation of aeroacoustic field around airfoil using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT09A005. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)