Research Output 1986 2020

2015

Numerical analysis of unsteady three-dimensional flow in a propeller fan using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Jan 1 2015, FAN 2015 - International Conference on Fan Noise, Technology and Numerical Methods. Institution of Mechanical Engineers, Vol. 2015-April.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

propeller fans
three dimensional flow
numerical analysis
simulation
computational grids

Numerical investigation of influence of rotor-rotor gap on performances of contra-rotating axial flow pump

Cao, L., Watanabe, S., Furukawa, A. & Wu, D., Jan 1 2015, Symposia. American Society of Mechanical Engineers, (ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, AJKFluids 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Rotors
Pumps
Hydraulics
Turbomachine blades

Numerical investigation on performance of contra-rotating axial flow pump with different rear rotor design

Honda, H., Cao, L., Watanabe, S., Tsuda, S. & Furukawa, A., Jan 1 2015.

Research output: Contribution to conferencePaper

Axial flow
Rotors
Pumps
Secondary flow
Computer simulation
3 Citations (Scopus)

Validation of Bubble Dynamics Equation for a Nano-scale Bubble via Molecular Dynamics Simulation

Tsuda, S., Hyodo, H. & Watanabe, S., Dec 3 2015, In : Journal of Physics: Conference Series. 656, 1, 012039.

Research output: Contribution to journalConference article

bubbles
molecular dynamics
Rayleigh equations
simulation
noncondensable gases
2014
2 Citations (Scopus)

Effect of runner position on performance for open type cross-flow turbine utilizing waterfalls

Katayama, Y., Iio, S. & Veerapun, S., Nov 1 2014, In : International Review of Mechanical Engineering. 8, 6, p. 1012-1016 5 p.

Research output: Contribution to journalArticle

Turbines
Water
Hydraulic turbines
Flow rate
5 Citations (Scopus)

Experimental and numerical investigations on performances of Darriues-type hydro turbine with inlet nozzle

Matsushita, D., Tanaka, K., Watanabe, S., OKuma, K. & Furukawa, A., Jan 1 2014, In : International Journal of Fluid Machinery and Systems. 7, 4, p. 151-159 9 p.

Research output: Contribution to journalArticle

Intake systems
Nozzles
Turbines
Nozzle design
Computer simulation
4 Citations (Scopus)

Experimental investigation of blade rows interactions in contrarotating axial flow pump

Cao, L., Honda, H., Yoshimura, H., Watanabe, S. & Furukawa, A., Jan 1 2014, Symposia: Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Flow Manipulation and Active Control: Theory, Experiments and Implementation; Multiscale Methods for Multiphase Flow; Noninvasive Measurements in Single and Multiphase Flows. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Turbomachine blades
Rotors
Pumps
Pressure measurement
2 Citations (Scopus)

Experimental investigation of blade-to-blade pressure distribution in contra-rotating axial flow pump

Cao, L., Watanabe, S., Honda, H., Yoshimura, H. & Furukawa, A., Jan 1 2014, In : International Journal of Fluid Machinery and Systems. 7, 4, p. 130-141 12 p.

Research output: Contribution to journalArticle

Axial flow
Pressure distribution
Turbomachine blades
Rotors
Pumps
3 Citations (Scopus)

Simultaneous optimization of rotor blade and wind-lens for aerodynamic design of wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Kawamitsu, K., Kido, K. & Oka, A., Jan 1 2014, ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 3B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbomachine blades
Lenses
Aerodynamics
Turbines
Rotors
1 Citation (Scopus)

Suppression of secondary flows in an axial flow turbine rotor with a novel blade design concept

Yamada, K., Furukawa, M., Shibata, T., Nakakido, S. & Oka, N., Jan 1 2014, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cambers
Axial flow
Secondary flow
Turbomachine blades
Turbines
1 Citation (Scopus)

Tentative study on performance of darriues-type hydroturbine operated in small open water channel

Matsushita, D., Moriyama, R., Nakashima, K., Watanabe, S., Okuma, K. & Furukawa, A., Jan 1 2014, In : IOP Conference Series: Earth and Environmental Science. 22, 062007.

Research output: Contribution to journalConference article

open water
turbine
torque
water level
channel flow
2 Citations (Scopus)

Thermal and dissolved gas effects on cavitation in a 2-D convergent-divergent nozzle flow

Watanabe, S., Enomoto, K., Yamamoto, Y. & Hara, Y., Jan 1 2014, Fora: Cavitation and Multiphase Flow; Fluid Measurements and Instrumentation; Microfluidics; Multiphase Flows: Work in Progress; Fluid-Particle Interactions in Turbulence. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Nozzles
Thermal effects
Gases
Ethers
3 Citations (Scopus)

Unsteady lift and drag characteristics of cavitating Clark Y-11.7% hydrofoil

Watanabe, S., Yamaoka, W. & Furukawa, A., Jan 1 2014, In : IOP Conference Series: Earth and Environmental Science. 22, 052009.

Research output: Contribution to journalConference article

drag
cavity
oscillation
cavitation
unsteady flow
2013
6 Citations (Scopus)

Aerodynamic design for wind-lens turbine using optimization technique

Oka, N., Furukawa, M., Yamada, K. & Kido, K., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT02A009. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lenses
Aerodynamics
Turbines
Rotors
Viscous flow
6 Citations (Scopus)

A study on Darrieus-type hydroturbine toward utilization of extra-low head natural flow streams

Tanaka, K., Hirowatari, K., Shimokawa, K., Watanabe, S., Matsushita, D. & Furukawa, A., Oct 4 2013, In : International Journal of Fluid Machinery and Systems. 6, 3, p. 152-159 8 p.

Research output: Contribution to journalArticle

Flow rate
Screening
Rivers
Wear of materials
4 Citations (Scopus)

Blade rows interaction in contra-rotating axial flow pump designed with different rotational speed concept

Cao, L. L., Watanabe, S., Imanishi, T., Yoshimura, H. & Furukawa, A., Dec 1 2013, In : IOP Conference Series: Materials Science and Engineering. 52, TOPIC 2, 022004.

Research output: Contribution to journalConference article

Axial flow
Turbomachine blades
Rotors
Pumps
Fourier analysis
1 Citation (Scopus)

Effects of tip clearance flow on rotating stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Jul 15 2013, In : Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 79, 801, p. 900-916 17 p.

Research output: Contribution to journalArticle

compressor rotors
rotating stalls
turbocompressors
clearances
Compressors
24 Citations (Scopus)

Effects of tip clearance on the stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Dec 17 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. GT2013-95479. (Proceedings of the ASME Turbo Expo; vol. 6 C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Vortex flow
Rotors
Flow fields
Tornadoes
7 Citations (Scopus)

Experimental analysis of flow structure in contra-rotating axial flow pump designed with different rotational speed concept

Cao, L., Watanabe, S., Imanishi, T., Yoshimura, H. & Furukawa, A., Aug 1 2013, In : Journal of Thermal Science. 22, 4, p. 345-351 7 p.

Research output: Contribution to journalArticle

axial flow pumps
rotors
flow velocity
pumps
internal flow
12 Citations (Scopus)

Low speed design of rear rotor in contra-rotating axial flow pump

Cao, L., Watanabe, S., Momosaki, S., Imanishi, T. & Furukawa, A., Feb 28 2013, In : International Journal of Fluid Machinery and Systems. 6, 2, p. 105-112 8 p.

Research output: Contribution to journalArticle

Axial flow
Rotors
Pumps
Vortex flow
Cambers
2 Citations (Scopus)

Suction performance and internal flow of a 2-bladed helical inducer with inlet asymmetric plate

Watanabe, S., Uchinono, Y., Ishizaka, K., Furukawa, A. & Kim, J. H., Oct 1 2013, In : Journal of Thermal Science. 22, 5, p. 395-403 9 p.

Research output: Contribution to journalArticle

helical inducers
internal flow
suction
cavitation flow
flow measurement
15 Citations (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Jun 28 2013, In : Journal of Turbomachinery. 135, 3, 051020.

Research output: Contribution to journalArticle

Centrifugal compressors
Compressors
Vortex flow
Flow rate
Flow structure
1 Citation (Scopus)

Toward direct numerical simulation of aeroacoustic field around airfoil using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT09A005. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aeroacoustics
Direct numerical simulation
Airfoils
Mach number
Flow fields
2012
6 Citations (Scopus)

An explanation for flow features of spike-type stall inception in an axial compressor rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 2663-2675 13 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Tornadoes
Vortex flow
Flow structure
69 Citations (Scopus)

An Explanation for Flow Features of Spike-Type Stall Inception in an Axial Compressor Rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., Nov 5 2012, In : Journal of Turbomachinery. 135, 2, 021023.

Research output: Contribution to journalArticle

Compressors
Rotors
Tornadoes
Vortex flow
Flow structure
3 Citations (Scopus)

Development of advanced centrifugal compressor for turbocharger, applying control of internal unsteady flow structure

Ebisu, M., Shiraishi, T., Tomita, I. & Furukawa, M., Jan 1 2012, Institution of Mechanical Engineers - 10th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Limited, p. 135-144 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow structure
Unsteady flow
Compressors
Exhaust gases
1 Citation (Scopus)

Experimental study on adjustment of inlet nozzle section to flow rate variation for darrieus-type hydro-turbine

Watanabe, S., Shimokawa, K., Furukawa, A., Okuma, K. & Matsushita, D., Mar 1 2012, In : International Journal of Fluid Machinery and Systems. 5, 1, p. 30-37 8 p.

Research output: Contribution to journalArticle

Intake systems
Nozzles
Turbines
Flow rate
Inlet flow
24 Citations (Scopus)

Experimental study on simplification of Darrieus-type hydro turbine with inlet nozzle for extra-low head hydropower utilization

Shimokawa, K., Furukawa, A., Okuma, K., Matsushita, D. & Watanabe, S., May 1 2012, In : Renewable Energy. 41, p. 376-382 7 p.

Research output: Contribution to journalArticle

Intake systems
Nozzles
Turbines
Power generation
Torque
5 Citations (Scopus)

On high efficiency operation of contra-rotating axial flow pump with rotational speed control toward effective energy saving

Cao, L. L., Watanabe, S., Imanishi, T., Momosaki, S. & Furukawa, A., Dec 1 2012, In : IOP Conference Series: Earth and Environmental Science. 15, PART 4, 042027.

Research output: Contribution to journalConference article

pump
prediction
speed
energy saving
method
1 Citation (Scopus)

Research on Darrieus-type hydraulic turbine for extra-low head hydropower utilization

Furukawa, A., Watanabe, S. & Okuma, K., Dec 1 2012, In : IOP Conference Series: Earth and Environmental Science. 15, PART 1, 012003.

Research output: Contribution to journalConference article

turbine
hydraulics
cavitation
fluid dynamics
3 Citations (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 735-743 9 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Compressors
Vortex flow
Flow rate
Flow structure
3 Citations (Scopus)

Thermodynamic parameter on cavitation in space inducer

Yoshida, Y., Kikuta, K., Niiyama, K. & Watanabe, S., Dec 1 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th Int. Conference on Nanochannels, Microchannels, and M, FEDSM 2. p. 203-213 11 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Liquids
Cryogenic liquids
Latent heat
11 Citations (Scopus)

Vibration characteristics due to cavitation in stator element of automotive torque converter at stall condition

Watanabe, S., Otani, R., Kunimoto, S., Hara, Y., Furukawa, A. & Yamaguchi, T., Dec 1 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and M, FEDSM 2012. PARTS A AND B ed. Vol. 1. p. 535-541 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torque converters
Cavitation
Stators
Flow separation
Bubbles (in fluids)
2011

Circulation of a vortex ring generated by pulsating jet flow

Akagi, F., Kawabata, K., Ando, Y., Yamaguchi, S. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 2911-2920 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vortex flow
Strouhal number
Measurement errors
Momentum
5 Citations (Scopus)

Detached eddy simulation of unsteady flow field and prediction of aerodynamic sound in a half-ducted propeller fan

Kusano, K., Jeong, J. H., Yamada, K. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 713-722 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellers
Unsteady flow
Fans
Flow fields
Aerodynamics
5 Citations (Scopus)

Development of dual-layer PSP/TSP system for pressure and temperature measurements in low-speed flow field

Moon, K. J., Mori, H., Ambe, Y. & Kawabata, H., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 2767-2772 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pressure measurement
Paint
Temperature measurement
Flow fields
Temperature

Effect of leading edge sweep on cavitation performance of two-bladed flat plate inducer

Igoshi, T., Uchinono, Y., Koroitamana, E., Ishizaka, K., Watanabe, S. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 289-296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Flow rate
Surges (fluid)
Flow measurement
Pressure measurement
1 Citation (Scopus)

Experimental stydy on performance of darrieus-type open hydroturbine with inlet nozzle in low downstream water level conditions

Hirowatari, K., Shimokawa, K., Iwamoto, S., Okuma, K., Watanabe, S., Matsusita, D. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 1851-1859 9 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Water levels
Nozzles
Turbines
Intake systems
Torque
2 Citations (Scopus)

Formation process of vortex ring generated by a pulsating jet flow

Akagi, F., Okuzono, Y., Ando, Y., Yamaguchi, S. & Furukawa, M., Dec 1 2011, In : Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 77, 775, p. 546-556 11 p.

Research output: Contribution to journalArticle

vortex rings
jet flow
Vortex flow
nozzles
Nozzles
20 Citations (Scopus)

Influence of setting condition on characteristics of Savonius hydraulic turbine with a shield plate

Iio, S., Katayama, Y., Uchiyama, F., Sato, E. & Ikeda, T., Sep 1 2011, In : Journal of Thermal Science. 20, 3, p. 224-228 5 p.

Research output: Contribution to journalArticle

turbines
hydraulics
clearances
coefficients
upstream

Influence of Setting Condition on Characteristics of Savonius Hydraulic Turbine with a Shield Plate

Iio, S., Katayama, Y., Uchiyama, F., Sato, E. & Ikeda, T., May 2011, In : Journal of Thermal Science. 20, 3, p. 224-228 5 p.

Research output: Contribution to journalArticle

turbines
hydraulics
clearances
coefficients
upstream
8 Citations (Scopus)

The role of tip leakage vortex breakdown in flow fields and aerodynamic characteristics of transonic centrifugal compressor impellers

Yamada, K., Furukawa, M., Fukushima, H., Ibaraki, S. & Tomita, I., Dec 1 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011. PARTS A, B, AND C ed. p. 2111-2123 13 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Impellers
Centrifugal compressors
Flow fields
Aerodynamics
Vortex flow
6 Citations (Scopus)

Unsteady and three-dimensional flow mechanism of spike-type stall inception in an axial flow compressor rotor

Kikuta, H., Iwakiri, K. I., Furukawa, M., Yamada, K., Gunjishima, S. & Okada, G., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 817-829 13 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial-flow compressors
Vortex flow
Rotors
Flow structure
Tornadoes
2010
11 Citations (Scopus)

Comparative study on tip clearance flow fields in two types of transonic centrifugal compressor impeller with splitter blades

Yamada, K., Tamagawa, Y., Fukushima, H., Furukawa, M., Ibaraki, S. & Iwakiri, K. I., Dec 1 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. PARTS A, B, AND C ed. p. 2053-2063 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Turbomachine blades
Compressors
Flow fields
Vortex flow
32 Citations (Scopus)

Development of ducted Darrieus turbine for low head hydropower utilization

Furukawa, A., Watanabe, S., Matsushita, D. & Okuma, K., Mar 1 2010, In : Current Applied Physics. 10, 2 SUPPL.

Research output: Contribution to journalArticle

turbines
Turbines
exhaustion
cost effectiveness
fossil fuels

Experimental study of cavitating flow in flat plate cascades with/without tip clearance

Watanabe, S., Suefuji, T., Ikeda, A. & Furukawa, A., 2010, 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010, ISROMAC-13. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Unsteady flow
High speed cameras
Video cameras
Cavitation
Vortex flow
1 Citation (Scopus)

Experimental study on leakage flow in labyrinth seals with asymmetric geometries

Nishii, K., Furukawa, A., Watanabe, S. & Miyake, K., Nov 25 2010, 10th Asian International Conference on Fluid Machinery, AICFM. Vol. 1225. p. 91-99 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

labyrinth seals
leakage
convexity
geometry
internal flow
7 Citations (Scopus)

Side-wall effect of runner casing on performance of Darrieus-type hydro turbine with inlet nozzle for extra-low head utilization

Shimokawa, K., Furukawa, A., Okuma, K., Matsushita, D. & Watanabe, S., Jan 1 2010, In : Science China Technological Sciences. 53, 1, p. 93-99 7 p.

Research output: Contribution to journalArticle

Intake systems
Nozzles
Turbines
Ducts
Experiments
2 Citations (Scopus)

Studies on numerical site calibration over complex terrain for wind turbines

Matsushita, D., Matsumiya, H., Hara, Y., Watanabe, S. & Furukawa, A., Jan 1 2010, In : Science China Technological Sciences. 53, 1, p. 8-12 5 p.

Research output: Contribution to journalArticle

Wind turbines
Calibration
Computational fluid dynamics
Topography
Flow fields
2009
3 Citations (Scopus)

A study on back flow structure in a 2-bladed helical inducer at a partial flow rate

Watanabe, S., Inoue, N., Ishizaka, K., Furukawa, A. & Kim, J. H., 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART A ed. Vol. 1. p. 267-275 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow structure
Flow rate
Cavitation
Flow fields
Surges (fluid)