Research Output

2015

Large-scale numerical simulation of unsteady flow field in a half-ducted propeller fan using lattice Boltzmann method

Yamada, K., Kusano, K. & Furukawa, M., Jan 1 2015.

Research output: Contribution to conferencePaper

Measurements of axial and radial thrust forces working on a three-stages centrifugal pump rotor

Yamashita, T., Watanabe, S., Hara, Y., Watanabe, H. & Miyagawa, K., Jan 1 2015.

Research output: Contribution to conferencePaper

8 Citations (Scopus)

Measurement technique for unsteady low-speed flow fields using poly(TMSP)-based pressure sensitive paint

Mori, H., Maeda, K., Furukawa, M. & Akiyoshi, M., Jan 1 2015.

Research output: Contribution to conferencePaper

Numerical analysis of unsteady three-dimensional flow in a propeller fan using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Jan 1 2015, FAN 2015 - International Conference on Fan Noise, Technology and Numerical Methods. Institution of Mechanical Engineers, Vol. 2015-April.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical investigation of influence of rotor-rotor gap on performances of contra-rotating axial flow pump

Cao, L., Watanabe, S., Furukawa, A. & Wu, D., Jan 1 2015, Symposia. American Society of Mechanical Engineers, (ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, AJKFluids 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical investigation on performance of contra-rotating axial flow pump with different rear rotor design

Honda, H., Cao, L., Watanabe, S., Tsuda, S. I. & Furukawa, A., Jan 1 2015.

Research output: Contribution to conferencePaper

Validation of Bubble Dynamics Equation for a Nano-scale Bubble via Molecular Dynamics Simulation

Tsuda, S., Hyodo, H. & Watanabe, S., Dec 3 2015, In : Journal of Physics: Conference Series. 656, 1, 012039.

Research output: Contribution to journalConference article

3 Citations (Scopus)
2014

Experimental and numerical investigations on performances of Darriues-type hydro turbine with inlet nozzle

Matsushita, D., Tanaka, K., Watanabe, S., OKuma, K. & Furukawa, A., Jan 1 2014, In : International Journal of Fluid Machinery and Systems. 7, 4, p. 151-159 9 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Experimental investigation of blade rows interactions in contrarotating axial flow pump

Cao, L., Honda, H., Yoshimura, H., Watanabe, S. & Furukawa, A., Jan 1 2014, Symposia: Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Flow Manipulation and Active Control: Theory, Experiments and Implementation; Multiscale Methods for Multiphase Flow; Noninvasive Measurements in Single and Multiphase Flows. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Experimental investigation of blade-to-blade pressure distribution in contra-rotating axial flow pump

Cao, L., Watanabe, S., Honda, H., Yoshimura, H. & Furukawa, A., Jan 1 2014, In : International Journal of Fluid Machinery and Systems. 7, 4, p. 130-141 12 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Simultaneous optimization of rotor blade and wind-lens for aerodynamic design of wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Kawamitsu, K., Kido, K. & Oka, A., Jan 1 2014, ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 3B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Suppression of secondary flows in an axial flow turbine rotor with a novel blade design concept

Yamada, K., Furukawa, M., Shibata, T., Nakakido, S. & Oka, N., Jan 1 2014, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Tentative study on performance of darriues-type hydroturbine operated in small open water channel

Matsushita, D., Moriyama, R., Nakashima, K., Watanabe, S., Okuma, K. & Furukawa, A., Jan 1 2014, In : IOP Conference Series: Earth and Environmental Science. 22, 062007.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Thermal and dissolved gas effects on cavitation in a 2-D convergent-divergent nozzle flow

Watanabe, S., Enomoto, K., Yamamoto, Y. & Hara, Y., Jan 1 2014, Fora: Cavitation and Multiphase Flow; Fluid Measurements and Instrumentation; Microfluidics; Multiphase Flows: Work in Progress; Fluid-Particle Interactions in Turbulence. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Unsteady lift and drag characteristics of cavitating Clark Y-11.7% hydrofoil

Watanabe, S., Yamaoka, W. & Furukawa, A., Jan 1 2014, In : IOP Conference Series: Earth and Environmental Science. 22, 052009.

Research output: Contribution to journalConference article

3 Citations (Scopus)
2013

Aerodynamic design for wind-lens turbine using optimization technique

Oka, N., Furukawa, M., Yamada, K. & Kido, K., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT02A009. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

A study on Darrieus-type hydroturbine toward utilization of extra-low head natural flow streams

Tanaka, K., Hirowatari, K., Shimokawa, K., Watanabe, S., Matsushita, D. & Furukawa, A., Oct 4 2013, In : International Journal of Fluid Machinery and Systems. 6, 3, p. 152-159 8 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Blade rows interaction in contra-rotating axial flow pump designed with different rotational speed concept

Cao, L. L., Watanabe, S., Imanishi, T., Yoshimura, H. & Furukawa, A., Dec 1 2013, In : IOP Conference Series: Materials Science and Engineering. 52, TOPIC 2, 022004.

Research output: Contribution to journalConference article

4 Citations (Scopus)

Effects of tip clearance flow on rotating stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Jul 15 2013, In : Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 79, 801, p. 900-916 17 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Effects of tip clearance on the stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Dec 17 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. GT2013-95479. (Proceedings of the ASME Turbo Expo; vol. 6 C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

26 Citations (Scopus)

Experimental analysis of flow structure in contra-rotating axial flow pump designed with different rotational speed concept

Cao, L., Watanabe, S., Imanishi, T., Yoshimura, H. & Furukawa, A., Aug 1 2013, In : Journal of Thermal Science. 22, 4, p. 345-351 7 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Low speed design of rear rotor in contra-rotating axial flow pump

Cao, L., Watanabe, S., Momosaki, S., Imanishi, T. & Furukawa, A., Feb 28 2013, In : International Journal of Fluid Machinery and Systems. 6, 2, p. 105-112 8 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Suction performance and internal flow of a 2-bladed helical inducer with inlet asymmetric plate

Watanabe, S., Uchinono, Y., Ishizaka, K., Furukawa, A. & Kim, J. H., Oct 1 2013, In : Journal of Thermal Science. 22, 5, p. 395-403 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Jun 28 2013, In : Journal of Turbomachinery. 135, 3, 051020.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Toward direct numerical simulation of aeroacoustic field around airfoil using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT09A005. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2012

An explanation for flow features of spike-type stall inception in an axial compressor rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 2663-2675 13 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

An Explanation for Flow Features of Spike-Type Stall Inception in an Axial Compressor Rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., Nov 5 2012, In : Journal of Turbomachinery. 135, 2, 021023.

Research output: Contribution to journalArticle

70 Citations (Scopus)

Development and validation of a reduced critical radius model for cryogenic cavitation

Tsuda, S. I., Tani, N. & Yamanishi, N., Jun 20 2012, In : Journal of Fluids Engineering, Transactions of the ASME. 134, 5, 051301.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Development of advanced centrifugal compressor for turbocharger, applying control of internal unsteady flow structure

Ebisu, M., Shiraishi, T., Tomita, I. & Furukawa, M., Jan 1 2012, Institution of Mechanical Engineers - 10th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Limited, p. 135-144 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Experimental study on adjustment of inlet nozzle section to flow rate variation for darrieus-type hydro-turbine

Watanabe, S., Shimokawa, K., Furukawa, A., Okuma, K. & Matsushita, D., Mar 1 2012, In : International Journal of Fluid Machinery and Systems. 5, 1, p. 30-37 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Experimental study on simplification of Darrieus-type hydro turbine with inlet nozzle for extra-low head hydropower utilization

Shimokawa, K., Furukawa, A., Okuma, K., Matsushita, D. & Watanabe, S., May 1 2012, In : Renewable Energy. 41, p. 376-382 7 p.

Research output: Contribution to journalArticle

25 Citations (Scopus)

On high efficiency operation of contra-rotating axial flow pump with rotational speed control toward effective energy saving

Cao, L. L., Watanabe, S., Imanishi, T., Momosaki, S. & Furukawa, A., Dec 1 2012, In : IOP Conference Series: Earth and Environmental Science. 15, PART 4, 042027.

Research output: Contribution to journalConference article

5 Citations (Scopus)

Research on Darrieus-type hydraulic turbine for extra-low head hydropower utilization

Furukawa, A., Watanabe, S. & Okuma, K., Dec 1 2012, In : IOP Conference Series: Earth and Environmental Science. 15, PART 1, 012003.

Research output: Contribution to journalConference article

1 Citation (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 735-743 9 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Thermodynamic parameter on cavitation in space inducer

Yoshida, Y., Kikuta, K., Niiyama, K. & Watanabe, S., Dec 1 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th Int. Conference on Nanochannels, Microchannels, and M, FEDSM 2. p. 203-213 11 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Vibration characteristics due to cavitation in stator element of automotive torque converter at stall condition

Watanabe, S., Otani, R., Kunimoto, S., Hara, Y., Furukawa, A. & Yamaguchi, T., Dec 1 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and M, FEDSM 2012. PARTS A AND B ed. Vol. 1. p. 535-541 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)
2011

Circulation of a vortex ring generated by pulsating jet flow

Akagi, F., Kawabata, K., Ando, Y., Yamaguchi, S. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 2911-2920 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Detached eddy simulation of unsteady flow field and prediction of aerodynamic sound in a half-ducted propeller fan

Kusano, K., Jeong, J. H., Yamada, K. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 713-722 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Development of dual-layer PSP/TSP system for pressure and temperature measurements in low-speed flow field

Moon, K. J., Mori, H., Ambe, Y. & Kawabata, H., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 2767-2772 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Effect of leading edge sweep on cavitation performance of two-bladed flat plate inducer

Igoshi, T., Uchinono, Y., Koroitamana, E., Ishizaka, K., Watanabe, S. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 289-296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental stydy on performance of darrieus-type open hydroturbine with inlet nozzle in low downstream water level conditions

Hirowatari, K., Shimokawa, K., Iwamoto, S., Okuma, K., Watanabe, S., Matsusita, D. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 1851-1859 9 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Formation process of vortex ring generated by a pulsating jet flow

Akagi, F., Okuzono, Y., Ando, Y., Yamaguchi, S. & Furukawa, M., Dec 1 2011, In : Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 77, 775, p. 546-556 11 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Influence of Setting Condition on Characteristics of Savonius Hydraulic Turbine with a Shield Plate

Iio, S., Katayama, Y., Uchiyama, F., Sato, E. & Ikeda, T., May 2011, In : Journal of Thermal Science. 20, 3, p. 224-228 5 p.

Research output: Contribution to journalArticle

The role of tip leakage vortex breakdown in flow fields and aerodynamic characteristics of transonic centrifugal compressor impellers

Yamada, K., Furukawa, M., Fukushima, H., Ibaraki, S. & Tomita, I., Dec 1 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011. PARTS A, B, AND C ed. p. 2111-2123 13 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Unsteady and three-dimensional flow mechanism of spike-type stall inception in an axial flow compressor rotor

Kikuta, H., Iwakiri, K. I., Furukawa, M., Yamada, K., Gunjishima, S. & Okada, G., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 817-829 13 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)
2010

Comparative study on tip clearance flow fields in two types of transonic centrifugal compressor impeller with splitter blades

Yamada, K., Tamagawa, Y., Fukushima, H., Furukawa, M., Ibaraki, S. & Iwakiri, K. I., Dec 1 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. PARTS A, B, AND C ed. p. 2053-2063 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

Development of ducted Darrieus turbine for low head hydropower utilization

Furukawa, A., Watanabe, S., Matsushita, D. & Okuma, K., Mar 1 2010, In : Current Applied Physics. 10, 2 SUPPL.

Research output: Contribution to journalArticle

34 Citations (Scopus)

Experimental study of cavitating flow in flat plate cascades with/without tip clearance

Watanabe, S., Suefuji, T., Ikeda, A. & Furukawa, A., 2010, 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010, ISROMAC-13. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental study on leakage flow in labyrinth seals with asymmetric geometries

Nishii, K., Furukawa, A., Watanabe, S. & Miyake, K., Nov 25 2010, 10th Asian International Conference on Fluid Machinery, AICFM. Vol. 1225. p. 91-99 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Side-wall effect of runner casing on performance of Darrieus-type hydro turbine with inlet nozzle for extra-low head utilization

Shimokawa, K., Furukawa, A., Okuma, K., Matsushita, D. & Watanabe, S., Jan 1 2010, In : Science China Technological Sciences. 53, 1, p. 93-99 7 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)