Research Output 1986 2020

8 Citations (Scopus)

Cavitation simulation of automotive torque converter using a homogeneous cavitation model

Tsutsumi, K., Watanabe, S., Tsuda, S. I. & Yamaguchi, T., Jan 1 2017, In : European Journal of Mechanics, B/Fluids. 61, p. 263-270 8 p.

Research output: Contribution to journalArticle

torque converters
Cavitation
cavitation flow
Converter
Torque
1 Citation (Scopus)

Cavitation simulation using a new simple homogeneous cavitation model

Watanabe, S., Tsuru, W., Yamamoto, Y. & Tsuda, S. I., Jan 1 2019.

Research output: Contribution to conferencePaper

Cavitation
Hydrofoils
Shear stress
Liquids
Vapors
6 Citations (Scopus)

CFD analysis of axial thrust in three stages centrifugal pump at design and partload conditions

Hiroyoshi, W., Watanabe, S., Tetsuya, Y. & Yoshinori, H., Jan 1 2015.

Research output: Contribution to conferencePaper

Centrifugal pumps
Computational fluid dynamics
Rotors
Flow fields
Impellers
1 Citation (Scopus)
axial flow
three dimensional flow
Axial flow
fans
Flow velocity

Circulation of a vortex ring generated by pulsating jet flow

Akagi, F., Kawabata, K., Ando, Y., Yamaguchi, S. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 2911-2920 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vortex flow
Strouhal number
Measurement errors
Momentum
96 Citations (Scopus)

Comparative studies on short and long length-scale stall cell propagating in an axial compressor rotor

Inoue, M., Kuroumaru, M., Tanino, T., Yoshida, S. & Furukawa, M., Jan 1 2001, In : Journal of Turbomachinery. 123, 1, p. 24-32 9 p.

Research output: Contribution to journalArticle

Compressors
Rotors
Pressure distribution
Vortex flow
Pressure transducers
9 Citations (Scopus)

Comparative studies on short and long length-scale stall cell propagating in an axial compressor rotor

Inoue, M., Kuroumaru, M., Tanino, T., Yoshida, S. & Furukawa, M., Jan 1 2000, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Pressure distribution
Vortex flow
Pressure transducers
11 Citations (Scopus)

Comparative study on tip clearance flow fields in two types of transonic centrifugal compressor impeller with splitter blades

Yamada, K., Tamagawa, Y., Fukushima, H., Furukawa, M., Ibaraki, S. & Iwakiri, K. I., Dec 1 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. PARTS A, B, AND C ed. p. 2053-2063 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Turbomachine blades
Compressors
Flow fields
Vortex flow
5 Citations (Scopus)

Controlled-endwall-flow blading for multistage axial compressor rotor

Inoue, M., Kuroumaru, M., Furukawa, M., Kinoue, Y., Tanino, T., Maeda, S. & Okuno, K., Jan 1 1997, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Turbomachine blades
Cascades (fluid mechanics)
Boundary layer flow
5 Citations (Scopus)

Controlled-endwall-flow blading for multistage axial compressor rotor

Inoue, M., Kuroumaru, M., Furukawa, M., Kinoue, Y., Tanino, T., Maeda, S. & Okuno, K., Dec 1 1997, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalArticle

Compressors
Rotors
Turbomachine blades
Cascades (fluid mechanics)
Boundary layer flow
4 Citations (Scopus)

Design of a propeller fan using 3-D Inverse Design Method and CFD for high efficiency and low aerodynamic noise

Okamoto, H., Goto, A. & Furukawa, M., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. p. 165-171 7 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellers
Fans
Aerodynamics
Computational fluid dynamics
Vortex flow
5 Citations (Scopus)

Detached eddy simulation of unsteady flow field and prediction of aerodynamic sound in a half-ducted propeller fan

Kusano, K., Jeong, J. H., Yamada, K. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 713-722 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellers
Unsteady flow
Fans
Flow fields
Aerodynamics
17 Citations (Scopus)

Detailed studies on aerodynamic performance and unsteady flow behaviors of a single turbine stage with variable rotor-stator axial gap

Kikuchi, M., Funazaki, K. I., Yamada, K. & Sato, H., Dec 1 2008, In : International Journal of Gas Turbine, Propulsion and Power Systems. 2, 1, p. 30-37 8 p.

Research output: Contribution to journalArticle

Unsteady flow
Stators
Aerodynamics
Turbines
Rotors
2 Citations (Scopus)

Detailed studies on separated boundary layers over low-pressure turbine airfoils under several high lift conditions: Effect of freesteam turbulence

Funazaki, K. I., Yamada, K., Tanaka, N. & Chiba, Y., Dec 1 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. p. 1013-1027 15 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Airfoils
Boundary layers
Turbulence
Turbines
Cascades (fluid mechanics)
3 Citations (Scopus)

Development of advanced centrifugal compressor for turbocharger, applying control of internal unsteady flow structure

Ebisu, M., Shiraishi, T., Tomita, I. & Furukawa, M., Jan 1 2012, Institution of Mechanical Engineers - 10th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Limited, p. 135-144 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow structure
Unsteady flow
Compressors
Exhaust gases
3 Citations (Scopus)

Development of air/water two-phase flow centrifugal pump and its operating characteristics

Furukawa, A., Okuma, K., Ohshita, S. & Watanabe, S., Dec 1 2003, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 1, part B, Forums. Ogut, A., Tsuji, Y., Kawahashi, M., Ogut, A., Tsuji, Y. & Kawahashi, M. (eds.). p. 1413-1418 6 p. (Proceedings of the ASME/JSME Joint Fluids Engineering Conference; vol. 1 B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Two phase flow
Flow rate
Water
Pumps
1 Citation (Scopus)

Development of air-water two-phase flow centrifugal pump and its operating characteristics

Furukawa, A., Matsushita, N., Watanabe, S., Ohshita, S. & Okuma, K., Jan 2005, In : Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 71, 701, p. 140-146 7 p.

Research output: Contribution to journalArticle

centrifugal pumps
Centrifugal pumps
two phase flow
blades
Two phase flow
5 Citations (Scopus)

Development of dual-layer PSP/TSP system for pressure and temperature measurements in low-speed flow field

Moon, K. J., Mori, H., Ambe, Y. & Kawabata, H., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 2767-2772 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pressure measurement
Paint
Temperature measurement
Flow fields
Temperature
32 Citations (Scopus)

Development of ducted Darrieus turbine for low head hydropower utilization

Furukawa, A., Watanabe, S., Matsushita, D. & Okuma, K., Mar 1 2010, In : Current Applied Physics. 10, 2 SUPPL.

Research output: Contribution to journalArticle

turbines
Turbines
exhaustion
cost effectiveness
fossil fuels

Development of multiple cells with short length-scale stall in an axial compressor rotor

Inoue, M., Kuroumaru, M., Tanino, T., Maeda, S. & Furukawa, M., Dec 1999, In : Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 65, 640, p. 4021-4026 6 p.

Research output: Contribution to journalArticle

compressor rotors
turbocompressors
Compressors
Rotors
cells
2 Citations (Scopus)

Development of pressure sensitive molecular film as a measurement technique for micro-flows

Matsuda, Y., Mori, H., Sakazakf, Y., Uchida, T., Suzuki, S., Yamaguchi, H. & Niimi, T., Apr 13 2009, In : AIP Conference Proceedings. 1084, p. 527-532 6 p.

Research output: Contribution to journalConference article

pressure sensitive paints
pressure measurement
Knudsen flow
polymers
pressure distribution
2 Citations (Scopus)
pressure sensitive paints
Knudsen flow
Surface measurement
pressure measurement
Pressure measurement
Transonic flow
transonic flow
Shock waves
laser induced fluorescence
shock waves
4 Citations (Scopus)

Diagnosis of three-dimensional transonic flow fields with laser-induced iodine fluorescence

Inoue, M., Masuda, M., Furukawa, M. & Muraishi, T., 1995, Experimental and Numerical Flow Visualization. Khalighi, B., Kobayashi, T., Fruman, D. H., Braun, M. J., Freitas, C. J. & et al, A. (eds.). ASME, Vol. 218. p. 163-170 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transonic flow
Iodine
Flow fields
Fluorescence
Shock waves
1 Citation (Scopus)

Direct numerical simulation of turbulent flow and aeroacoustic fields around an airfoil using lattice boltzmann method

Kusano, K., Yamada, K., Furukawa, M. & Moon, K. J., Jan 1 2016, Symposia: Turbomachinery Flow Simulation and Optimization; Applications in CFD; Bio-Inspired and Bio-Medical Fluid Mechanics; CFD Verification and Validation; Development and Applications of Immersed Boundary Methods; DNS, LES and Hybrid RANS/LES Methods; Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Active Fluid Dynamics and Flow Control - Theory, Experiments and Implementation. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aeroacoustics
Direct numerical simulation
Airfoils
Turbulent flow
Boundary layers
2 Citations (Scopus)

Discussion on measurement mechanism of pressure-sensitive paints

Yamaguchi, H., Matsuda, Y., Mori, H. & Niimi, T., Oct 12 2009, In : Sensors and Actuators, B: Chemical. 142, 1, p. 224-229 6 p.

Research output: Contribution to journalArticle

pressure sensitive paints
Paint
Knudsen flow
paints
taps
pressure sensitive paints
Knudsen flow
Paint
taps
paints
4 Citations (Scopus)

Dynamics of a cavitating propeller in a water tunnel

Watanabe, S. & Brennen, C. E., Mar 1 2003, In : Journal of Fluids Engineering, Transactions of the ASME. 125, 2, p. 283-292 10 p.

Research output: Contribution to journalArticle

Propellers
Tunnels
Cavitation
Water
Pipe flow
Hydrofoils
Cavitation
Pressure distribution
Numerical analysis
Computer simulation

Effect of inlet nozzle shape on performance of darrieus-type hydro-turbine operated in small open water channel

Kazuhiko, N., Daisuke, M., Watanabe, S., Tsuda, S. & Akinori, F., Jan 1 2015.

Research output: Contribution to conferencePaper

Aquaporins
Nozzles
Turbines
Water
Open channel flow

Effect of leading edge sweep on cavitation performance of two-bladed flat plate inducer

Igoshi, T., Uchinono, Y., Koroitamana, E., Ishizaka, K., Watanabe, S. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 289-296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Flow rate
Surges (fluid)
Flow measurement
Pressure measurement
2 Citations (Scopus)

Effect of runner position on performance for open type cross-flow turbine utilizing waterfalls

Katayama, Y., Iio, S. & Veerapun, S., Nov 1 2014, In : International Review of Mechanical Engineering. 8, 6, p. 1012-1016 5 p.

Research output: Contribution to journalArticle

Turbines
Water
Hydraulic turbines
Flow rate
34 Citations (Scopus)

Effect of tip clearance on stall evolution process in a low-speed axial compressor stage

Inoue, M., Yoshida, S., Yamada, K., Kuroumaru, M., Minami, T. & Furukawa, M., Dec 22 2004, p. 385-394. 10 p.

Research output: Contribution to conferencePaper

Compressors
Vortex flow
Rotors
Tornadoes
Flow simulation
7 Citations (Scopus)

Effect of wake passing on unsteady aerodynamic performance in a turbine stage

Yamada, K., Hiroma, K., Hirano, Y., Funazaki, K., Tsutsumi, M. & Matsuo, A., Nov 15 2006, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air. p. 757-767 11 p. (Proceedings of the ASME Turbo Expo; vol. 6 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aerodynamics
Turbines
Stators
Rotors
Vortex flow

Effects of 3D microstructural distribution on short crack growth behavior in two bimodal Ti–6Al–4V alloys

Hassanipour, M., Watanabe, S., Hirayama, K., Toda, H., Uesugi, K. & Takeuchi, A., Oct 24 2019, In : Materials Science and Engineering A. 766, 138264.

Research output: Contribution to journalArticle

short cracks
Crack propagation
Cracks
cracks
microstructure
1 Citation (Scopus)

Effects of dissolved gas on unsteady cavitating flow around a clark y-11.7% hydrofoil

Daido, H., Watanabe, S. & Tsuda, S., Jan 1 2015.

Research output: Contribution to conferencePaper

Hydrofoils
Unsteady flow
Gases
Drag
Cavitation
1 Citation (Scopus)

Effects of flow path height of impeller exit and diffuser on flow fields in a transonic centrifugal compressor

Tomita, I., Ibaraki, S., Wakashima, K., Furukawa, M., Yamada, K. & Kanzaki, D., Jan 1 2015, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow fields
Electric inductors
Unsteady flow
Momentum

Effects of spanwise distribution of cascade characteristics on rotating stall - A three-dimensional linear analysis

Watanabe, S., Miyamoto, M., Yokota, K. & Tsujimoto, Y., Jan 1 1999, In : JSME International Journal, Series B: Fluids and Thermal Engineering. 42, 3, p. 460-466 7 p.

Research output: Contribution to journalArticle

rotating stalls
Actuator disks
cascades
actuator disks
slopes
3 Citations (Scopus)

Effects of stream surface inclination on tip leakage flow fields in compressor rotors

Furukawa, M., Saiki, K., Nagayoshi, K., Kuroumaru, M. & Inoue, M., 1997, In : Unknown Journal.

Research output: Contribution to journalArticle

flow field
leakage
Compressors
Flow fields
Vortex flow
46 Citations (Scopus)

Effects of stream surface inclination on tip leakage flow fields in compressor rotors

Furukawa, M., Saiki, K., Nagayoshi, K., Kuroumaru, M. & Inoue, M., Jan 1 1998, In : Journal of Turbomachinery. 120, 4, p. 683-692 10 p.

Research output: Contribution to journalArticle

Compressors
Flow fields
Vortex flow
Rotors
Axial flow

Effects of stream surface inclination on tip leakage flow fields in compressor rotors

Furukawa, M., Saiki, K., Nagayoshi, K., Kuroumaru, M. & Inoue, M., Jan 1 1997, Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Flow fields
Vortex flow
Rotors
Axial flow
42 Citations (Scopus)

Effects of the tip clearance on vortical flow and its relation to noise in an axial flow fan

Jang, C. M., Fukano, T. & Furukawa, M., Aug 1 2003, In : JSME International Journal, Series B: Fluids and Thermal Engineering. 46, 3, p. 356-365 10 p.

Research output: Contribution to journalArticle

axial flow
Axial flow
clearances
fans
Fans
1 Citation (Scopus)

Effects of tip clearance flow on rotating stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Jul 15 2013, In : Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 79, 801, p. 900-916 17 p.

Research output: Contribution to journalArticle

compressor rotors
rotating stalls
turbocompressors
clearances
Compressors
25 Citations (Scopus)

Effects of tip clearance on the stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Dec 17 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. GT2013-95479. (Proceedings of the ASME Turbo Expo; vol. 6 C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Vortex flow
Rotors
Flow fields
Tornadoes

Effects of upstream bend on aerodynamic performance of a transonic centrifugal compressor

Yamada, K., Furukawa, M., Arai, H. & Ito, S., Jan 1 2019, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Aerodynamics
Pipe
Compressors
Flow rate
3 Citations (Scopus)

Evolution of reverse flow in a transonic centrifugal compressor at near-surge

Yamada, K., Furukawa, M., Arai, H. & Kanzaki, D., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow fields
Compressors
Unsteady flow
1 Citation (Scopus)

Excitation force and blade inlet flow characteristics of radial turbines subject to nozzle wake effect

Matsuo, E., Yoshiki, H., Nakazawa, N., Inoue, M., Furukawa, M. & Utsumi, R., Jan 1 1996, In : Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 62, 602, p. 3635-3641 7 p.

Research output: Contribution to journalArticle

inlet flow
Inlet flow
flow characteristics
turbines
blades
1 Citation (Scopus)

Experimental analyses of high Knudsen number flows

Niimi, T., Mori, H., Yamaguchi, H. & Matsuda, Y., Sep 1 2009, In : International Journal of Emerging Multidisciplinary Fluid Sciences. 1, 3, p. 213-227 15 p.

Research output: Contribution to journalArticle

Knudsen flow
gas flow
Flow of gases
rarefied gases
laser induced fluorescence
4 Citations (Scopus)

Experimental analysis of diffuser rotating stall in a three-stage centrifugal pump

Takamine, T., Furukawa, D., Watanabe, S., Watanabe, H. & Miyagawa, K., Jan 1 2018, In : International Journal of Fluid Machinery and Systems. 11, 1, p. 77-84 8 p.

Research output: Contribution to journalArticle

Centrifugal pumps
Flow rate
Rotors
7 Citations (Scopus)

Experimental analysis of flow structure in contra-rotating axial flow pump designed with different rotational speed concept

Cao, L., Watanabe, S., Imanishi, T., Yoshimura, H. & Furukawa, A., Aug 1 2013, In : Journal of Thermal Science. 22, 4, p. 345-351 7 p.

Research output: Contribution to journalArticle

axial flow pumps
rotors
flow velocity
pumps
internal flow