Research Output 1986 2020

Filter
Conference contribution
2018
2 Citations (Scopus)

Flow structure and unsteady behavior of hub-corner separation in a stator cascade of a multi-stage transonic axial compressor

Saito, S., Yamada, K., Furukawa, M., Watanabe, K., Matsuoka, A. & Niwa, N., Jan 1 2018, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2A-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow structure
Stators
Compressors
Flow fields
Vortex flow

The role of meridional geometry in aerodynamic design of centrifugal compressor

Ito, S., Furukawa, M., Yamada, K., Manabe, K., Oka, N., Tomita, I. & Hayashi, Y., Jan 1 2018, Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Aerodynamics
Viscous flow
Geometry
Compressors
2017

Evolution of reverse flow in a transonic centrifugal compressor at near-surge

Yamada, K., Furukawa, M., Arai, H. & Kanzaki, D., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow fields
Compressors
Unsteady flow
1 Citation (Scopus)

Experimental investigation on diffuser rotating stall in a three-stage centrifugal pump

Takamine, T., Watanabe, S., Furukawa, D., Watanabe, H. & Miyagawa, K., Jan 1 2017, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal pumps
Rotors
Flow rate
Impellers
Channel flow
2 Citations (Scopus)

Optimum aerodynamic design of centrifugal compressor impeller using an inverse method based on meridional viscous flow analysis

Oka, N., Furukawa, M., Yamada, K., Itou, S., Ibaraki, S., Iwakiri, K. & Hayashi, Y., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Viscous flow
Aerodynamics
Flow fields
Flow separation
1 Citation (Scopus)

Vortical flow structure of hub-corner separation in a stator cascade of a multi-stage transonic axial compressor

Saito, S., Furukawa, M., Yamada, K., Tamura, Y., Matsuoka, A. & Niwa, N., 2017, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery. American Society of Mechanical Engineers (ASME), Vol. 1A-2017.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow structure
Stators
Compressors
Vortex flow
Flow fields
2016
1 Citation (Scopus)

Direct numerical simulation of turbulent flow and aeroacoustic fields around an airfoil using lattice boltzmann method

Kusano, K., Yamada, K., Furukawa, M. & Moon, K. J., Jan 1 2016, Symposia: Turbomachinery Flow Simulation and Optimization; Applications in CFD; Bio-Inspired and Bio-Medical Fluid Mechanics; CFD Verification and Validation; Development and Applications of Immersed Boundary Methods; DNS, LES and Hybrid RANS/LES Methods; Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Active Fluid Dynamics and Flow Control - Theory, Experiments and Implementation. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aeroacoustics
Direct numerical simulation
Airfoils
Turbulent flow
Boundary layers
2 Citations (Scopus)

Large-scale des analysis of stall inception process in a multi-stage axial flow compressor

Yamada, K., Furukawa, M., Tamura, Y., Saito, S., Matsuoka, A. & Nakayama, K., Jan 1 2016, Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 2D-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial-flow compressors
Compressors
Stators
Gas turbines
Unsteady flow
2015

Aerodynamic performances and flow fields of pareto optimal solutions in an aerodynamic design of a wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Oka, A. & Kurokawa, Y., Jan 1 2015, Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lenses
Flow fields
Aerodynamics
Turbines
Wind turbines
1 Citation (Scopus)

Effects of flow path height of impeller exit and diffuser on flow fields in a transonic centrifugal compressor

Tomita, I., Ibaraki, S., Wakashima, K., Furukawa, M., Yamada, K. & Kanzaki, D., Jan 1 2015, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow fields
Electric inductors
Unsteady flow
Momentum
8 Citations (Scopus)

Large-scale des analysis of unsteady flow field in a multi-stage axial flow compreßor at off-design condition using k computer

Yamada, K., Furukawa, M., Nakakido, S., Matsuoka, A. & Nakayama, K., Jan 1 2015, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Unsteady flow
Flow fields
Boundary conditions
Gas turbines

Numerical analysis of unsteady three-dimensional flow in a propeller fan using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Jan 1 2015, FAN 2015 - International Conference on Fan Noise, Technology and Numerical Methods. Institution of Mechanical Engineers, Vol. 2015-April.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

propeller fans
three dimensional flow
numerical analysis
simulation
computational grids

Numerical investigation of influence of rotor-rotor gap on performances of contra-rotating axial flow pump

Cao, L., Watanabe, S., Furukawa, A. & Wu, D., Jan 1 2015, Symposia. American Society of Mechanical Engineers, (ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, AJKFluids 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Rotors
Pumps
Hydraulics
Turbomachine blades
2014

A molecular dynamics study of nuclear quantum effect on the diffusion of hydrogen in condensed phase

Nagashima, H., Tsuda, S., Tsuboi, N., Koshi, M., Hayashie, A. K. & Tokumasu, T., Oct 6 2014, International Conference of Computational Methods in Sciences and Engineering 2014, ICCMSE 2014. Simos, T. E., Monovasilis, T., Simos, T. E., Kalogiratou, Z., Simos, T. E., Simos, T. E. & Simos, T. E. (eds.). American Institute of Physics Inc., p. 950-953 4 p. (AIP Conference Proceedings; vol. 1618).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

molecular dynamics
diffusivity
hydrogen
molecules
kinetic energy
4 Citations (Scopus)

Experimental investigation of blade rows interactions in contrarotating axial flow pump

Cao, L., Honda, H., Yoshimura, H., Watanabe, S. & Furukawa, A., Jan 1 2014, Symposia: Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Flow Manipulation and Active Control: Theory, Experiments and Implementation; Multiscale Methods for Multiphase Flow; Noninvasive Measurements in Single and Multiphase Flows. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Turbomachine blades
Rotors
Pumps
Pressure measurement
3 Citations (Scopus)

Simultaneous optimization of rotor blade and wind-lens for aerodynamic design of wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Kawamitsu, K., Kido, K. & Oka, A., Jan 1 2014, ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 3B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbomachine blades
Lenses
Aerodynamics
Turbines
Rotors

Suppression of secondary flows in an axial flow turbine rotor with a novel blade design concept

Yamada, K., Furukawa, M., Shibata, T., Nakakido, S. & Oka, N., Jan 1 2014, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cambers
Axial flow
Secondary flow
Turbomachine blades
Turbines
2 Citations (Scopus)

Thermal and dissolved gas effects on cavitation in a 2-D convergent-divergent nozzle flow

Watanabe, S., Enomoto, K., Yamamoto, Y. & Hara, Y., Jan 1 2014, Fora: Cavitation and Multiphase Flow; Fluid Measurements and Instrumentation; Microfluidics; Multiphase Flows: Work in Progress; Fluid-Particle Interactions in Turbulence. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Nozzles
Thermal effects
Gases
Ethers
2013
5 Citations (Scopus)

Aerodynamic design for wind-lens turbine using optimization technique

Oka, N., Furukawa, M., Yamada, K. & Kido, K., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT02A009. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lenses
Aerodynamics
Turbines
Rotors
Viscous flow

A molecular dynamics analysis of quantum effect on the thermodynamic properties of liquid hydrogen

Nagashima, H., Tsuda, S., Tsuboi, N., Koshi, M., Hayashi, A. K. & Tokumasu, T., Dec 1 2013, ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013. V001T12A014. (ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Quantum Effects
Thermodynamic Properties
Dynamic Analysis
Molecular Dynamics
Dynamic analysis
24 Citations (Scopus)

Effects of tip clearance on the stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Dec 17 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. GT2013-95479. (Proceedings of the ASME Turbo Expo; vol. 6 C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Vortex flow
Rotors
Flow fields
Tornadoes
1 Citation (Scopus)

Toward direct numerical simulation of aeroacoustic field around airfoil using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT09A005. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aeroacoustics
Direct numerical simulation
Airfoils
Mach number
Flow fields
2012
6 Citations (Scopus)

An explanation for flow features of spike-type stall inception in an axial compressor rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 2663-2675 13 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Rotors
Tornadoes
Vortex flow
Flow structure
3 Citations (Scopus)

Development of advanced centrifugal compressor for turbocharger, applying control of internal unsteady flow structure

Ebisu, M., Shiraishi, T., Tomita, I. & Furukawa, M., Jan 1 2012, Institution of Mechanical Engineers - 10th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Limited, p. 135-144 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Flow structure
Unsteady flow
Compressors
Exhaust gases
3 Citations (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 735-743 9 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Compressors
Vortex flow
Flow rate
Flow structure
3 Citations (Scopus)

Thermodynamic parameter on cavitation in space inducer

Yoshida, Y., Kikuta, K., Niiyama, K. & Watanabe, S., Dec 1 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th Int. Conference on Nanochannels, Microchannels, and M, FEDSM 2. p. 203-213 11 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Thermodynamics
Liquids
Cryogenic liquids
Latent heat
10 Citations (Scopus)

Vibration characteristics due to cavitation in stator element of automotive torque converter at stall condition

Watanabe, S., Otani, R., Kunimoto, S., Hara, Y., Furukawa, A. & Yamaguchi, T., Dec 1 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and M, FEDSM 2012. PARTS A AND B ed. Vol. 1. p. 535-541 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torque converters
Cavitation
Stators
Flow separation
Bubbles (in fluids)
2011

An estimation of thermodynamic and transport properties of cryogenic hydrogen using classical molecular simulation

Nagashima, H., Tokumasu, T., Tsuda, S. I., Tsuboi, N., Koshi, M. & Hayashi, A. K., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. p. 289-299 11 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transport properties
Cryogenics
Hydrogen
Thermodynamic properties
Lennard-Jones potential

Circulation of a vortex ring generated by pulsating jet flow

Akagi, F., Kawabata, K., Ando, Y., Yamaguchi, S. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 2911-2920 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vortex flow
Strouhal number
Measurement errors
Momentum
5 Citations (Scopus)

Detached eddy simulation of unsteady flow field and prediction of aerodynamic sound in a half-ducted propeller fan

Kusano, K., Jeong, J. H., Yamada, K. & Furukawa, M., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 713-722 10 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellers
Unsteady flow
Fans
Flow fields
Aerodynamics
3 Citations (Scopus)

Development of dual-layer PSP/TSP system for pressure and temperature measurements in low-speed flow field

Moon, K. J., Mori, H., Ambe, Y. & Kawabata, H., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 2767-2772 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pressure measurement
Paint
Temperature measurement
Flow fields
Temperature

Effect of leading edge sweep on cavitation performance of two-bladed flat plate inducer

Igoshi, T., Uchinono, Y., Koroitamana, E., Ishizaka, K., Watanabe, S. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. Vol. 1. p. 289-296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cavitation
Flow rate
Surges (fluid)
Flow measurement
Pressure measurement
1 Citation (Scopus)

Experimental stydy on performance of darrieus-type open hydroturbine with inlet nozzle in low downstream water level conditions

Hirowatari, K., Shimokawa, K., Iwamoto, S., Okuma, K., Watanabe, S., Matsusita, D. & Furukawa, A., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 1851-1859 9 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Water levels
Nozzles
Turbines
Intake systems
Torque
8 Citations (Scopus)

The role of tip leakage vortex breakdown in flow fields and aerodynamic characteristics of transonic centrifugal compressor impellers

Yamada, K., Furukawa, M., Fukushima, H., Ibaraki, S. & Tomita, I., Dec 1 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011. PARTS A, B, AND C ed. p. 2111-2123 13 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Impellers
Centrifugal compressors
Flow fields
Aerodynamics
Vortex flow
6 Citations (Scopus)

Unsteady and three-dimensional flow mechanism of spike-type stall inception in an axial flow compressor rotor

Kikuta, H., Iwakiri, K. I., Furukawa, M., Yamada, K., Gunjishima, S. & Okada, G., Dec 1 2011, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011. PARTS A, B, C, D ed. p. 817-829 13 p. (ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011; vol. 1, no. PARTS A, B, C, D).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial-flow compressors
Vortex flow
Rotors
Flow structure
Tornadoes
2010
11 Citations (Scopus)

Comparative study on tip clearance flow fields in two types of transonic centrifugal compressor impeller with splitter blades

Yamada, K., Tamagawa, Y., Fukushima, H., Furukawa, M., Ibaraki, S. & Iwakiri, K. I., Dec 1 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. PARTS A, B, AND C ed. p. 2053-2063 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Turbomachine blades
Compressors
Flow fields
Vortex flow

Experimental study of cavitating flow in flat plate cascades with/without tip clearance

Watanabe, S., Suefuji, T., Ikeda, A. & Furukawa, A., 2010, 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010, ISROMAC-13. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Unsteady flow
High speed cameras
Video cameras
Cavitation
Vortex flow
1 Citation (Scopus)

Experimental study on leakage flow in labyrinth seals with asymmetric geometries

Nishii, K., Furukawa, A., Watanabe, S. & Miyake, K., Nov 25 2010, 10th Asian International Conference on Fluid Machinery, AICFM. Vol. 1225. p. 91-99 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

labyrinth seals
leakage
convexity
geometry
internal flow
2009
1 Citation (Scopus)

A modeling of thermal properties of hydrogen/oxygen system using molecular simulations

Tsuda, S., Yamanishi, N., Tokumasu, T., Tsuboi, N. & Matsumoto, Y., Dec 1 2009, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-1601. (47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

oxygen supply equipment
Thermodynamic properties
thermodynamic properties
hydrogen
Hydrogen

An improvement of a cavitation model and the application to LES

Tsuda, S., Tani, N., Yamanishi, N. & Kato, C., Sep 14 2009, 2008 Proceedings of the ASME Fluids Engineering Division Summer Conference, FEDSM 2008. p. 69-74 6 p. (2008 Proceedings of the ASME Fluids Engineering Division Summer Conference, FEDSM 2008; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Large eddy simulation
Cavitation
Bubbles (in fluids)
Turbulent flow
Volume fraction
3 Citations (Scopus)

A study on back flow structure in a 2-bladed helical inducer at a partial flow rate

Watanabe, S., Inoue, N., Ishizaka, K., Furukawa, A. & Kim, J. H., 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART A ed. Vol. 1. p. 267-275 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow structure
Flow rate
Cavitation
Flow fields
Surges (fluid)
4 Citations (Scopus)

Design of a propeller fan using 3-D Inverse Design Method and CFD for high efficiency and low aerodynamic noise

Okamoto, H., Goto, A. & Furukawa, M., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. p. 165-171 7 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellers
Fans
Aerodynamics
Computational fluid dynamics
Vortex flow
2 Citations (Scopus)

Detailed studies on separated boundary layers over low-pressure turbine airfoils under several high lift conditions: Effect of freesteam turbulence

Funazaki, K. I., Yamada, K., Tanaka, N. & Chiba, Y., Dec 1 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. p. 1013-1027 15 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Airfoils
Boundary layers
Turbulence
Turbines
Cascades (fluid mechanics)
2 Citations (Scopus)

Experimental study of unsteady cavitating flow around flat plate hydrofoil with/without tip clearance

Watanabe, S., Suefuji, T., Ikeda, A., Furukawa, A. & Nishii, K., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. p. 387-391 5 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrofoils
Unsteady flow
High speed cameras
Video cameras
Cavitation
14 Citations (Scopus)

Influences of axial gap between blade rows on secondary flows and aerodynamic performance in a turbine stage

Yamada, K., Funazaki, K., Kikuchi, M. & Sato, H., Dec 1 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. p. 1039-1049 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Secondary flow
Aerodynamics
Turbines
Flow fields
Stators
17 Citations (Scopus)

Unsteady and three-dimensional flow phenomena in a transonic centrifugal compressor impeller at rotating stall

Iwakiri, K., Furukawa, M., Ibaraki, S. & Tomita, I., Dec 1 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. p. 1611-1622 12 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Compressors
Flow fields
Vortex flow
Tornadoes
2008
4 Citations (Scopus)

Numerical and experimental studies on separated boundary layers over ultra-high lift low-pressure turbine cascade airfoils with variable solidity: Effects of free-stream turbulence

Funazaki, K. I., Yamada, K., Chiba, Y. & Tanaka, N., Dec 1 2008, 2008 Proceedings of the ASME Turbo Expo: Power for Land, Sea, and Air. PART B ed. (Proceedings of the ASME Turbo Expo; vol. 6, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cascades (fluid mechanics)
Airfoils
Boundary layers
Turbulence
Turbines
16 Citations (Scopus)

Numerical investigation of relation between unsteady behavior of tip leakage vortex and rotating disturbance in a transonic axial compressor rotor

Yamada, K., Funazaki, K. & Sasaki, H., Dec 1 2008, 2008 Proceedings of the ASME Turbo Expo: Power for Land, Sea, and Air. PART A ed. p. 425-436 12 p. (Proceedings of the ASME Turbo Expo; vol. 6, no. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Vortex flow
Rotors
Unsteady flow
NASA
2007

Development of pressure sensitive molecular film suitable for measurement in high knudsen number flows

Mori, H., Matsuda, Y., Yamaguchi, H., Sakazaki, Y., Uchida, T. & Niimi, T., Dec 1 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 53-58 6 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Knudsen flow
pressure sensitive paints
pressure measurement
Paint
molecules
1 Citation (Scopus)

Discussion on luminescent intensity of pressure sensitive paint

Yamaguchi, H., Matsuda, Y., Mori, H. & Niimi, T., Dec 1 2007, 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007. p. 87-90 4 p. (2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

pressure sensitive paints
Paint
luminous intensity
Knudsen flow
flow distribution