Research Output 1989 2020

2020

Evaluation of Feel of Fishing Reel by Elucidating the Relationship Between Tactile Sensation and Gear Vibration

Inoue, T. & Kurokawa, S., Jan 1 2020, Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2019 International Conference on Affective and Pleasurable Design. Fukuda, S. (ed.). Springer Verlag, p. 154-164 11 p. (Advances in Intelligent Systems and Computing; vol. 952).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Reels
Gear teeth
Time delay
2019
1 Citation (Scopus)

4D-Printing System for Elastic Magnetic Actuators

Azukizawa, S., Shinoda, H. & Tsumori, F., Jan 2019, 2019 IEEE 32nd International Conference on Micro Electro Mechanical Systems, MEMS 2019. Institute of Electrical and Electronics Engineers Inc., p. 248-251 4 p. 8870639. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS); vol. 2019-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnetic actuators
printing
Printing
actuators
Actuators

Attempts on pico-precision machining via combination of ELID-grinding and polishing

Ohmori, H., Kim, Y., Uehara, Y., Kasuga, H., Ono-Kato, T., Lin, W., Kurokawa, S. & Umezu, S., Jan 1 2019, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 4, p. 304-309 6 p.

Research output: Contribution to journalArticle

Polishing
Machining

Bio-mimic motion of 3D-printed gel structures dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., Jan 1 2019, In : Journal of the Electrochemical Society. 166, 9, p. B3235-B3239

Research output: Contribution to journalArticle

Open Access
Particles (particulate matter)
Gels
Actuators
Magnetic fields
Magnetic anisotropy

Bio-mimic motion of elastic material dispersed with hard-magnetic particles

Furusawa, M., Maeda, K., Azukizawa, S., Shinoda, H. & Tsumori, F., Jan 1 2019, In : Journal of Photopolymer Science and Technology. 32, 2, p. 309-313 5 p.

Research output: Contribution to journalArticle

Open Access
Elastomers
Neodymium
Magnetic materials
Cantilever beams
Biomimetics
2 Citations (Scopus)

Bio-mimic motion of gel material dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., Jan 1 2019, ECS Transactions. Nagahara, L., Masubuchi, Y., Shiba, T., Ito, K., Sekhar, P., Yanagida, M., Dos Santos, F. D., Milano, G., Furukawa, H., Chu, T-Y., Saito, T., Kakugo, A., Matsui, H., Tokito, S., Ito, H., Khosla, A., Fukushima, K., Yoshida, T., Bhansali, S., Kaltenbrunner, M., White, M., Nakai, A. & Masuhara, A. (eds.). 1 ed. Electrochemical Society Inc., p. 89-97 9 p. (ECS Transactions; vol. 88, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Particles (particulate matter)
Printing
Actuators
Gels
3D printers

CMP characteristics of quartz glass substrate by aggregated colloidal ceria slurry

Wakamatsu, K., Kurokawa, S., Toyama, T. & Hayashi, T., Nov 1 2019, In : Precision Engineering. 60, p. 458-464 7 p.

Research output: Contribution to journalArticle

Cerium compounds
Quartz
Glass
Substrates
Polishing

Effects of changes in gas type and partial pressure on chemical mechanical polishing property of Si substrate

Yin, T., Kitamura, K., Doi, T., Kurokawa, S., Zhou, Z. & Feng, K., Jan 1 2019, In : ECS Journal of Solid State Science and Technology. 8, 4, p. P293-P297

Research output: Contribution to journalArticle

Chemical mechanical polishing
Partial pressure
Gases
Polishing
Cytidine Monophosphate

High functionality of an optical fiber stylus for micro metrology

Murakami, H., Katsuki, A., Sajima, T., Uchiyama, K., Yamamoto, T., Nagata, R. & Fujiyoshi, K., Jan 1 2019, Laser Metrology and Machine Performance XIII - 13th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2019. Blunt, L. & Knapp, W. (eds.). euspen, p. 73-77 5 p. (Laser Metrology and Machine Performance XIII - 13th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

metrology
Optical fibers
optical fibers
Coatings
coatings

Imprint process with in-plane compression method for bio-functional surface

Tokumaru, K., Yonekura, K. & Tsumori, F., Jan 1 2019, In : Journal of Photopolymer Science and Technology. 32, 2, p. 315-319 5 p.

Research output: Contribution to journalArticle

Open Access
Biomimetics
Lithography
Silicones
Aspect ratio
Compressive stress
Contact resistance
Wear of materials
Coatings
Acoustic impedance
Experiments
Open Access
Machinability
Forging
Automobiles
automobile
cutting (process)
Open Access
Powders
Sintering

The study of bile duct stent having antifouling properties using biomimetics technique

Sekiguchi, A., Nishino, T., Aikawa, M., Matsumoto, Y., Minami, H., Tokumaru, K., Tsumori, F. & Tanigawa, H., Jan 1 2019, In : Journal of Photopolymer Science and Technology. 32, 3, p. 373-382 10 p.

Research output: Contribution to journalArticle

Open Access
Stents
Biomimetics
Ducts
Oils
Water
2018
4 Citations (Scopus)

3D printing system of magnetic anisotropy for artificial cilia

Azukizawa, S., Shinoda, H., Tokumaru, K. & Tsumori, F., Jan 1 2018, In : Journal of Photopolymer Science and Technology. 31, 1, p. 139-144 6 p.

Research output: Contribution to journalArticle

Magnetic anisotropy
Printing
Actuators
Elastomers
Mammals

Developing a method of fabricating microchannels using plant root structure

Nakashima, S., Tokumaru, K. & Tsumori, F., Jun 1 2018, In : Japanese Journal of Applied Physics. 57, 6, 06HJ07.

Research output: Contribution to journalArticle

plant roots
microchannels
Microchannels
blood vessels
Blood vessels
2 Citations (Scopus)

Development of energy-harvesting system using deformation of magnetic elastomer

Shinoda, H. & Tsumori, F., Jun 1 2018, In : Japanese Journal of Applied Physics. 57, 6, 06HJ05.

Research output: Contribution to journalArticle

Energy harvesting
elastomers
Magnetic flux
Elastomers
magnetic flux
1 Citation (Scopus)
Tensile strength
Mechanical properties
Microstructure
Boron
Molybdenum

Fabrication of a fiber probe using a CO 2 laser for microstructure measurement: High functionality and durability test

Uchiyama, K., Murakami, H., Katsuki, A., Sajima, T., Yamamoto, T., Nagata, R. & Fujiyoshi, K., Jan 1 2018, In : Procedia CIRP. 77, p. 513-516 4 p.

Research output: Contribution to journalConference article

Durability
Fabrication
Microstructure
Fibers
Lasers
2 Citations (Scopus)
Gears
Machine vibrations
Vibrations (mechanical)
Gear teeth
1 Citation (Scopus)

Interfacial pattern changes of imprinted multilayered material in milli- and microscales

Yonekura, K., Tokumaru, K. & Tsumori, F., Jun 1 2018, In : Japanese Journal of Applied Physics. 57, 6, 06HG05.

Research output: Contribution to journalArticle

microbalances
Nanoimprint lithography
lithography
micrometers
pressing

Investigation of Surface Excitation Effect for Ablation of 4H-SiC Substrate Using Double-Pulse Beam

Matsunaga, K., Hayashi, T., Kurokawa, S., Yokoo, H., Hasegawa, N., Nishikino, M., Kumada, T., Otobe, T., Matsukawa, Y. & Takaya, Y., Jan 1 2018, X-Ray Lasers 2016 - Proceedings of the 15th International Conference on X-Ray Lasers. Kawachi, T., Bulanov, S. V., Daido, H. & Kato, Y. (eds.). Springer Science and Business Media, LLC, p. 321-326 6 p. (Springer Proceedings in Physics; vol. 202).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

ablation
fluence
pulses
excitation
energy absorption
3 Citations (Scopus)

Polishing Characteristics of MnO 2 Polishing Slurry on the Si-face of SiC Wafer

Yin, T., Doi, T., Kurokawa, S., Zhou, Z. Z. & Feng, K. P., Dec 1 2018, In : International Journal of Precision Engineering and Manufacturing. 19, 12, p. 1773-1780 8 p.

Research output: Contribution to journalArticle

Polishing
Ions
Chemical mechanical polishing
Surface morphology
1 Citation (Scopus)

Room temperature impact deposition of ceramic by laser shock wave

Jinno, K. & Tsumori, F., Jun 1 2018, In : Japanese Journal of Applied Physics. 57, 6, 06HJ06.

Research output: Contribution to journalArticle

Shock waves
shock waves
ceramics
Lasers
room temperature
1 Citation (Scopus)

SEM, AFM and TEM studies for repeated irradiation effect of femtosecond laser on 4H-SiC surface morphology at near threshold fluence

Wang, C., Kurokawa, S., Doi, T., Yuan, J., Fan, L., Mitsuhara, M., Lu, H., Yao, W., Zhang, Y. & Zhang, K., Jan 1 2018, In : ECS Journal of Solid State Science and Technology. 7, 2, p. P29-P34

Research output: Contribution to journalArticle

Ultrashort pulses
Surface morphology
Microscopes
Electron microscopes
Irradiation
1 Citation (Scopus)

Study of femtosecond laser ablation effect on micro-processing for 4H-SiC substrate

Wang, C., Kurokawa, S., Yuan, J., Fan, L., Lu, H., Wu, Z., Yao, W., Zhang, K., Zhang, Y. & Doi, T., Jan 1 2018, In : International Journal of Automation Technology. 12, 2, p. 187-198 12 p.

Research output: Contribution to journalArticle

Laser ablation
Ultrashort pulses
Scanning
Substrates
Processing
3 Citations (Scopus)

Study of the antifouling polymer sheet which used biomimetics technique

Sekiguchi, A., Matsumoto, Y., Minami, H., Nishino, T., Tanigawa, H., Tokumaru, K. & Tsumori, F., Jan 1 2018, In : Journal of Photopolymer Science and Technology. 31, 1, p. 121-128 8 p.

Research output: Contribution to journalArticle

Biomimetics
Polymers
Medical applications
Fouling
Polymer films
1 Citation (Scopus)

Study of the anti-fouling polymer sheet which used biomimetics technique

Sekiguchi, A., Matsumoto, Y., Minami, H., Nishino, T., Tanigawa, H., Tokumaru, K. & Tsumori, F., Jan 1 2018, Biosensing and Nanomedicine XI. Agahi, M. H., Razeghi, M., Mohseni, H. & Agahi, M. H. (eds.). SPIE, 107280L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10728).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

antifouling
biomimetics
Biomimetics
Fouling
snails
7 Citations (Scopus)

Surface characterisation and corrosion behaviour of oxide layer for SLMed-316L stainless steel

Harun, W. S. W., Asri, R. I. M., Romlay, F. R. M., Sharif, S., Jan, N. H. M. & Tsumori, F., Jun 5 2018, In : Journal of Alloys and Compounds. 748, p. 1044-1052 9 p.

Research output: Contribution to journalArticle

Stainless Steel
Oxides
Stainless steel
Corrosion
Oxidation

The effects of grain size and pore size on the high cycle fatigue behavior of injection molded Ti-6Al-4V compacts

Kudo, K., Shinagawa, K. & Miura, H., Jan 1 2018, Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018. Metal Powder Industries Federation, p. 243-252 10 p. (Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pore size
grain size
Fatigue of materials
injection
porosity
Semiconductor materials
Data storage equipment
5 Citations (Scopus)

Visco-elastic control of elastomer with magnetic particles by applied magnetic field

Maede, D., Tsumori, F., Osada, T. & Kudo, K., Jan 1 2018, In : IEEJ Transactions on Sensors and Micromachines. 138, 2, p. 48-53 6 p.

Research output: Contribution to journalArticle

Elastomers
Magnetic fields
Polydimethylsiloxane
Actuators
Damping
2017
Abrasives
Viscosity
Nanoparticles
Shear viscosity
Compensation and Redress

Capillary liquid bridge and grain coarsening during liquid phase sintering

Nikolić, Z. S. & Shinagawa, K., Jan 1 2017, In : Science of Sintering. 49, 1, p. 1-10 10 p.

Research output: Contribution to journalArticle

liquid phase sintering
liquid bridges
Liquid phase sintering
Coarsening
Liquids
10 Citations (Scopus)
laser machining
Machining
Magnetic fields
Ultraviolet lasers
systems analysis
6 Citations (Scopus)

Development of multilayer imprint process for solid oxide fuel cells

Tokumaru, K., Tsumori, F., Kudo, K., Osada, T. & Shinagawa, K., Jun 2017, In : Japanese Journal of Applied Physics. 56, 6, 06GL04.

Research output: Contribution to journalArticle

solid oxide fuel cells
Solid oxide fuel cells (SOFC)
Multilayers
Electrolytes
Powders

Dynamics of photo-excitation for the ablation of 4H-SiC substrate using femtosecond laser

Matsunaga, K., Hayashi, T., Kurokawa, S., Yokoo, H., Hasegawa, N., Nishikino, M. & Matsukawa, Y., Nov 13 2017.

Research output: Contribution to conferencePaper

Photoexcitation
Ablation
Ultrashort pulses
Substrates
Ultrafast lasers
3 Citations (Scopus)

Effect of plasma formation on the double pulse laser excitation of cubic silicon carbide

Otobe, T., Hayashi, T. & Nishikino, M., Oct 23 2017, In : Applied Physics Letters. 111, 17, 171107.

Research output: Contribution to journalArticle

silicon carbides
pulses
excitation
lasers
energy absorption
2 Citations (Scopus)

Fabrication of ultra-small-diameter optical-fiber probe using acid-etch technique and CO2 laser for 3D-micro metrology

Murakami, H., Katsuki, A., Sajima, T. & Uchiyama, K., Jan 1 2017, In : International Journal of Automation Technology. 11, 5, p. 699-706 8 p.

Research output: Contribution to journalArticle

Optical fibers
Adhesives
Fabrication
Curing
Acids
1 Citation (Scopus)

Feel of fishing reel

Inoue, T. & Kurokawa, S., Nov 17 2017, Emotional Engineering: Understanding Motivation. Springer International Publishing, Vol. 6. p. 93-118 26 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Gears
CAD
functionality
art studies
recreational activity
Bearing pads
MEMS
Semiconductor materials
Industry

Preface

Moriwaki, I., Fujii, M., Hirogaki, T., Iwatsuki, N., Koide, T., Kurokawa, S., Tanaka, E. & Tozaki, Y., Nov 2017, In : Journal of Advanced Mechanical Design, Systems and Manufacturing. 11, 6, JAMDSM0067.

Research output: Contribution to journalEditorial

3 Citations (Scopus)
Gears
Simulators
Gear teeth
2 Citations (Scopus)

Surface morphology evolution induced by multiple femtosecond laser ablation on 4H-SiC substrate and its application to CMP

Wang, C., Kurokawa, S., Doi, T., Yuan, J., Lv, B. & Zhang, K., Jan 1 2017, In : ECS Journal of Solid State Science and Technology. 6, 12, p. P853-P861

Research output: Contribution to journalArticle

Chemical mechanical polishing
Laser ablation
Ultrashort pulses
Silicon carbide
Surface morphology
10 Citations (Scopus)

The polishing effect of sic substrates in femtosecond laser irradiation assisted chemical mechanical polishing (CMP)

Wang, C., Kurokawa, S., Doi, T., Yuan, J., Sano, Y., Aida, H., Zhang, K. & Deng, Q., Jan 1 2017, In : ECS Journal of Solid State Science and Technology. 6, 4, p. P105-P112

Research output: Contribution to journalArticle

Chemical mechanical polishing
Laser beam effects
Ultrashort pulses
Polishing
Substrates
2016
1 Citation (Scopus)
Superalloys
Mechanical properties
Lasers
Elongation
Fatigue of materials

Brownian diffusion analysis for nano-abrasives in CMP slurry by using fluorescence polarization method

Hayashi, T., Toshiki, S. & Kurokawa, S., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7411985. (2015 International Conference on Planarization/CMP Technology, ICPT 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Abrasives
Fluorescence
Polarization
Particle size analysis
1 Citation (Scopus)

Control strategy of developed mechanical actuator in measuring hole surface parameter

Ali, M. H., Katsuki, A., Sajima, T., Murakami, H. & Kurokawa, S., May 1 2016, In : International Journal of Advanced Manufacturing Technology. 84, 5-8, p. 777-786 10 p.

Research output: Contribution to journalArticle

Mechanical actuators
Actuators
Units of measurement
Optical systems
Interferometers

Control the deformation of MIM parts by the powder size distribution

Osada, T., Kudo, K., Hashikawa, R., Tsumori, F. & Miura, H., Jan 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Powders