Research Output 1989 2019

Filter
Conference contribution
2019

Bio-mimic motion of gel material dispersed with magnetic particles

Shinoda, H., Azukizawa, S., Maeda, K. & Tsumori, F., Jan 1 2019, ECS Transactions. Khosla, A., Kaltenbrunner, M., Dos Santos, F. D., Fukushima, K., Yanagida, M., Furukawa, H., Ito, K., Chu, T-Y., Saito, T., Milano, G., Nagahara, L., Sekhar, P., Kakugo, A., Matsui, H., Yoshida, T., White, M., Masubuchi, Y., Bhansali, S., Tokito, S., Nakai, A., Shiba, T., Ito, H. & Masuhara, A. (eds.). 1 ed. Electrochemical Society Inc., p. 89-97 9 p. (ECS Transactions; vol. 88, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Particles (particulate matter)
Printing
Actuators
Gels
3D printers
2018

Investigation of Surface Excitation Effect for Ablation of 4H-SiC Substrate Using Double-Pulse Beam

Matsunaga, K., Hayashi, T., Kurokawa, S., Yokoo, H., Hasegawa, N., Nishikino, M., Kumada, T., Otobe, T., Matsukawa, Y. & Takaya, Y., Jan 1 2018, X-Ray Lasers 2016 - Proceedings of the 15th International Conference on X-Ray Lasers. Springer Science and Business Media, LLC, Vol. 202. p. 321-326 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

ablation
fluence
pulses
excitation
energy absorption

Study of the anti-fouling polymer sheet which used biomimetics technique

Sekiguchi, A., Matsumoto, Y., Minami, H., Nishino, T., Tanigawa, H., Tokumaru, K. & Tsumori, F., Jan 1 2018, Biosensing and Nanomedicine XI. Agahi, M. H., Razeghi, M., Mohseni, H. & Agahi, M. H. (eds.). SPIE, 107280L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10728).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

antifouling
biomimetics
Biomimetics
Fouling
snails
2016

Brownian diffusion analysis for nano-abrasives in CMP slurry by using fluorescence polarization method

Hayashi, T., Toshiki, S. & Kurokawa, S., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7411985

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Abrasives
Fluorescence
Polarization
Particle size analysis

Control the deformation of MIM parts by the powder size distribution

Osada, T., Kudo, K., Hashikawa, R., Tsumori, F. & Miura, H., Jan 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Powders

Effect of grain size on the fatigue properties of injection moulded Ti-6Al-4V compacts

Kudo, K., Ishimitsu, H., Choe, J., Osada, T., Miura, H. & Shinagawa, K., Jan 1 2016, World PM 2016 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Metal molding
Injection molding
Powders
Boron

Fabrication of probe tips for nanoscale 3D metrology

Uchiyama, K., Murakami, H., Katsuki, A., Sajima, T., Yamamoto, T., Nagata, R. & Fujiyoshi, K., Jan 1 2016, Proceedings - 32nd ASPE Annual Meeting. American Society for Precision Engineering, ASPE, p. 305-310 6 p. (Proceedings - 32nd ASPE Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

probe
Fabrication
metrology

Optimization of machining conditions of basic-type CMP/P-CVM fusion processing using SiC substrate

Sano, Y., Shiozawa, K., Doi, T., Kurokawa, S., Aida, H., Oyama, K., Miyashita, T., Sumizawa, H. & Yamauchi, K., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7412032

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Machining
Fusion reactions
Polishing
Substrates
1 Citation (Scopus)

Proposal of cleanliness evaluation method of CMP pad, and investigation of cleaning effect by the high-pressure jet

Kitamura, M., Kurokawa, S., Tokumoto, Y., Hayashi, T., Hiyama, H., Wada, Y. & Takatoh, C., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7411952

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Cleaning
Debris
Surface properties

Real- Time evaluation of tool wear detection system under wet machining based on electrical contact resistance

Gouarir, A., Kurokawa, S., Sajima, T. & Murata, M., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Contact resistance
contact resistance
machining
Machining
Wear of materials

Study on innovative plasma fusion CMP and its application to processing of diamond substrate

Nishizawa, H., Oyama, K., Doi, T. K., Aida, H., Kim, S., Sano, Y., Kurokawa, S. & Wan, C., Feb 17 2016, 2015 International Conference on Planarization/CMP Technology, ICPT 2015. Institute of Electrical and Electronics Engineers Inc., 7412031

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diamond
Chemical mechanical polishing
Diamonds
Fusion reactions
Plasmas
2015

A study on fluorescence polarization method for analyzing diffusional movement of abrasive grain in CMP slurry

Hayashi, T., Seri, T. & Kurokawa, S., Oct 18 2015, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abrasives
Fluorescence
Viscosity
Polarization
Brownian movement
2 Citations (Scopus)

Basic study on etching selectivity of plasma chemical vaporization machining by introducing crystallographic damage into work surface

Sano, Y., Doi, T., Kurokawa, S., Aida, H., Ohnishi, O., Uneda, M., Okada, Y., Nishikawa, H. & Yamauchi, K., Jan 1 2015, Precision Engineering and Nanotechnology V. Trans Tech Publications Ltd, p. 550-553 4 p. (Key Engineering Materials; vol. 625).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vaporization
Etching
Machining
Plasmas
Plasma etching

Development of 3D printer with integrated temperature control system

Mir-Nasiri, N., Ali, M. H. & Kurokawa, S., Nov 20 2015, 2015 4th International Conference on Informatics, Electronics and Vision, ICIEV 2015. Institute of Electrical and Electronics Engineers Inc., 7333996. (2015 4th International Conference on Informatics, Electronics and Vision, ICIEV 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Integrated control
Temperature control
Conceptual design
Control systems

Development of a laser-guided deep small-sized hole-measurement system: Measurement accuracy

Katsuki, A., Sajima, T., Murakami, H., Hazrat, A. M., Ohnishi, O. & Akashi, K., 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. euspen, p. 201-202 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lasers
lasers
Units of measurement
Measurement errors
Optical systems
1 Citation (Scopus)

Development of basic-type CMP/P-CVM fusion processing system (Type A) and its fundamental characteristics

Shiozawa, K., Sano, Y., Kurokawa, S., Miyashita, T., Sumizawa, H., Doi, T., Aida, H., Oyama, K. & Yamauchi, K., Jan 1 2015, ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014. Institute of Electrical and Electronics Engineers Inc., p. 275-278 4 p. 7017298. (ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical mechanical polishing
Vaporization
Machining
Fusion reactions
Plasmas

Evaluation of a high-speed air turbine microspindle for monitoring machining processes using audible sound and pressure measurements

Guangyu, Z., Murakami, H., Katsuki, A., Sajima, T. & Uchiyama, K., 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. euspen, p. 151-152 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressed air motors
Acoustic variables measurement
acoustic measurement
Pressure sensors
turbines

Fabrication of an ultra-small-diameter optical fiber probe for 3D micro metrology

Murakami, H., Katsuki, A., Sajima, T., Fukuda, M., Okada, M. & Nagaura, M., 2015, XXI IMEKO World Congress "Measurement in Research and Industry". IMEKO-International Measurement Federation Secretariat

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Glues
Curing
Optical fibers
Resins
Finite element method
1 Citation (Scopus)

Improvement of fatigue strength for titanium alloy compacts by MIM

Jungho, C., Osada, T., Kudo, K., Tsumori, F. & Miura, H., 2015, Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015. Metal Powder Industries Federation

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
injection molding
titanium alloys
Titanium alloys
Injection molding
1 Citation (Scopus)

In-process tool wear detection of square end mill based on DC two terminal method

Gouarir, A., Kurokawa, S., Murata, M., Sajima, T. & Torii, T., Oct 18 2015, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wear of materials
Contact resistance
Electromotive force
Acoustic impedance
Experiments

Processing characteristics of SiC wafer by consideration of oxidation effect in different atmospheric environment

Zhang, J., Kurokawa, S., Hayashi, T., Asakawa, E. & Wang, C., Jan 20 2015, ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014. Institute of Electrical and Electronics Engineers Inc., p. 279-282 4 p. 7017299

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon carbide
Oxidation
Processing
Hardness
Semiconductor materials
1 Citation (Scopus)

Study on a novel CMP/P-CVM fusion processing system (Type B) and its basic characteristics

Oyama, K., Sano, Y., Aida, H., Kim, S., Nishizawa, H., Doi, T. K., Kurokawa, S., Miyashita, T. & Yamazaki, T., Jan 1 2015, ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014. Institute of Electrical and Electronics Engineers Inc., p. 142-146 5 p. 7017266. (ICPT 2014 - Proceedings of International Conference on Planarization/CMP Technology 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical mechanical polishing
Fusion reactions
Processing
Substrates
Polishing
2014

3D modeling of heterogeneous microstructure for super high strengthened low alloy steels by MIM process

Xu, Y., Tsumori, F., Osada, T., Harun, W. S. W. & Miura, H., Jan 1 2014, Advances in Powder Metallurgy and Particulate Materials - 2014, Proceedings of the 2014 World Congress on Powder Metallurgy and Particulate Materials, PM 2014. Metal Powder Industries Federation, p. 1150-1155 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
injection molding
high strength steels
High strength steel
Injection molding

Development of a system for 3-D micro metrology using an ultra-small-diameter optical fiber probe-optical analysis and evaluative experiment using the 0.4 μm diameter stylus shaft

Murakami, H., Katsuki, A., Sajima, T., Tokuoh, N. & Fukuda, M., Jan 1 2014, Proceedings - ASPE 2014 Annual Meeting. American Society for Precision Engineering, ASPE, p. 63-66 4 p. (Proceedings - ASPE 2014 Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical fibers
Semiconductor lasers
Experiments
Wavelength
Microstructure

Development of Ti-Al intermetallic alloy compacts by metal injection molding

Miura, H., Osada, T., Kanda, Y., Xu, Y., Tsumori, F. & Kubota, Y., Jan 1 2014, Advances in Powder Metallurgy and Particulate Materials - 2014, Proceedings of the 2014 World Congress on Powder Metallurgy and Particulate Materials, PM 2014. Metal Powder Industries Federation, p. 4134-4139 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
injection molding
Titanium
Injection molding
Intermetallics

Measurement of Axial Position of a Microsphere Using Chromatic Confocal System for Probe System Based on the Laser Trapping with the Standing Wave Scale

Ueda, S. I., Michihata, M., Hayashi, T. & Takaya, Y., 2014, 2014 International Symposium on Optomechatronic Technologies, ISOT 2014. Institute of Electrical and Electronics Engineers Inc., p. 223-227 5 p. 7119424

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microspheres
Lasers
Interpolation
Scanning
Wavelength

Total Angle Resolved Scattering Characterization for Ultra-fine Finished Surface Areal-Topography

Takaya, Y., Michihata, M. & Hayashi, T., Jan 1 2014, 2014 International Symposium on Optomechatronic Technologies, ISOT 2014. Institute of Electrical and Electronics Engineers Inc., p. 200-204 5 p. 7119419

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface topography
Scattering
Light scattering
Platinum
Lenses
2013

Annealing time dependence on the phase equilibria and thermoelectric property of type-I Ba8Cu6Ag2Si38 clathrate

Bin, L., Makoto, S., Yuya, N., Takuya, O., Toshiko, O., Hideshi, M., Osamu, F. & Munetoh, S., Mar 20 2013, Engineered Technologies in Materials Science, Geotechnics, Environment and Mechanical Engineering. Vol. 310. p. 59-62 4 p. (Applied Mechanics and Materials; vol. 310).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase equilibria
Precipitates
Annealing
Transition metals
Grain boundaries

Application of mems technique for micro gear metrology

Kurokawa, S., Umezaki, Y., Hoga, M., Ishimaru, R., Ohnishi, O. & Doi, T., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 457-466 10 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Gear teeth
Measurement errors
MEMS
Machining
1 Citation (Scopus)

Camera based 3D probe control in measuring gear profile

Ali, M. H., Kurokawa, S. & Uesugi, K., 2013, Proceedings - 2013 2nd International Conference on Robot, Vision and Signal Processing, RVSP 2013. IEEE Computer Society, p. 242-246 5 p. 6830022

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Cameras
Measurement errors
Control theory
Computer systems
6 Citations (Scopus)

Characteristics in SiC-CMP using MnO2 slurry with strong oxidant under different atmospheric conditions

Kurokawa, S., Doi, T., Ohnishi, O., Yamazaki, T., Tan, Z. & Yin, T., Jan 1 2013, Evolutions in Planarization: Equipment, Materials, Techniques and Applications. Materials Research Society, Vol. 1560. p. 39-47 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
meteorology
Oxidants
Silicon carbide
silicon carbides

Development of a laser-guided deep-hole measurement system: Adjustment to a small size

K, A., Ali, M. D. H., S, T., Hiroshi, M., O, O. & Kurokawa, S., 2013, Proceedings of the 28th Annual Meeting of the American Society for Precision Engineering, ASPE 2013. p. 431-436 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser
Lasers

Direct laser forming for more complex shaped titanium alloy compacts

Miura, H., Kang, H., Xu, Y., Tsumori, F. & Osada, T., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., Vol. 2. p. 1587-1595 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium alloys
Medical applications
Lasers
Aerospace applications
Titanium

Fine heterogeneous microstructure and mechanical properties of mim FE-NI alloy steels

Harun, W. S. W., Osada, T., Xu, Y., Tsumori, F. & Miura, H., Dec 18 2013, Advances in Powder Metallurgy and Particulate Materials - 2013, Proceedings of the 2013 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2013. p. 420-430 11 p. (Advances in Powder Metallurgy and Particulate Materials - 2013, Proceedings of the 2013 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Alloy steel
Powders
Mechanical properties
Microstructure
Metal molding
7 Citations (Scopus)

Improvement of Solid Oxide Fuel Cell by imprinted patterns on eelectrolyte

Xu, Y., Tsumori, F., Hashimoto, S., Takahashi, M., Kang, H., Osada, T. & Miura, H., Sep 2 2013, 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2013. p. 887-890 4 p. 6559865

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ceramics
Solid oxide fuel cells (SOFC)
Oxides
Electrolytes
Electrodes
7 Citations (Scopus)

Magneto-FEM analysis for micro actuator using array of magnetic elements

Tsumori, F., Hatama, K., Kang, H., Osada, T. & Miura, H., Sep 2 2013, 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2013. p. 845-848 4 p. 6559857. (8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite Element Analysis
Magnetic Fields
Actuators
Magnetic actuators
Finite element method
9 Citations (Scopus)

Simulation of deformation of layered sheet during micro powder imprinting process

Tsumori, F., Xu, Y., Kang, H., Osada, T. & Miura, H., 2013, Computational Plasticity XII: Fundamentals and Applications - Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013. p. 1267-1273 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Powders
Binders
Powder metallurgy
Interfaces (computer)
Polymers
5 Citations (Scopus)

Vision based measurement system for gear profile

Ali, M. H., Kurokawa, S. & Uesugi, K., 2013, 2013 International Conference on Informatics, Electronics and Vision, ICIEV 2013. 6572652

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Precision engineering
Measurement errors
Inspection
Cameras
2012
1 Citation (Scopus)

Analysis and evaluation of surface force effects in vibrating fiber probing system for 3-D micro structure measurements

Murakami, H., Katsuki, A. & Sajima, T., 2012, Emerging Technology in Precision Engineering XIV. Vol. 523-524. p. 907-912 6 p. (Key Engineering Materials; vol. 523-524).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microstructure
Fibers
Optical fibers
Atmospheric humidity
Adhesion
1 Citation (Scopus)

Development of mechanical actuator for deep-hole measurement system

Ali, M. H., Katsuki, A., Sajima, T., Murakami, H. & Kurokawa, S., 2012, Trends in Intelligent Robotics, Automation, and Manufacturing - First International Conference, IRAM 2012, Proceedings. Vol. 330 CCIS. p. 280-287 8 p. (Communications in Computer and Information Science; vol. 330 CCIS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical actuators
Actuators
Optical systems
Interferometers
Semiconductor lasers

Development of novel groove patterns for CMP pad

Yamazaki, T., Doi, T. K., Kurokawa, S., Ohnishi, O., Uneda, M., Seshimo, K. & Aida, H., Apr 30 2012, Ultra-Precision Machining Technologies. p. 264-267 4 p. (Advanced Materials Research; vol. 497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High speed cameras
Abrasives
Image processing
Metals
3 Citations (Scopus)

Evaluation and analysis of distortion of complex shaped Ti-6Al-4V compacts by metal injection molding process

Virdhian, S., Osada, T., Kang, H. G., Tsumori, F. & Miura, H., Nov 1 2012, Powder Metallurgy of Titanium: Powder Processing, Consolidation and Metallurgy of Titanium. p. 187-194 8 p. (Key Engineering Materials; vol. 520).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Binders
Machinability
Aerospace applications
1 Citation (Scopus)

Mechanical properties of injection molded superalloy (rene 95) compacts at high temperature

Miura, H., Osada, T., Morinaka, S., Kang, H. & Tsumori, F., 2012, Advances in Powder Metallurgy and Particulate Materials - 2012, Proceedings of the 2012 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2012. p. 428-434 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Superalloys
Injection molding
Mechanical properties
Aerospace applications

Optical performance of a laser point source strongly emitted by an aspheric expander

Park, S., Doi, T., Kurokawa, S. & Ohnishi, O., Apr 30 2012, Ultra-Precision Machining Technologies. p. 304-310 7 p. (Advanced Materials Research; vol. 497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Light sources
Semiconductor lasers
Lasers
Optical systems
Optical design

Simple and simultaneous measurement of five-degrees-of-freedom error motions for a micro high-speed spindle

Murakami, H., Katsuki, A., Sajima, T. & Nakayama, N., 2012, Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012. euspen, Vol. 2. p. 46-49 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

spindles
Lenses
degrees of freedom
high speed
balls
5 Citations (Scopus)

The effects of strong oxidizing slurry and processing atmosphere on double-sided CMP of SiC wafer

Yin, T., Doi, T., Kurokawa, S., Ohnishi, O., Yamazaki, T., Wang, Z. & Tan, Z., Dec 19 2012, Manufacturing Engineering and Automation II. p. 1131-1134 4 p. (Advanced Materials Research; vol. 591-593).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Processing
Oxidants
Atmospheric pressure
Air
Experiments
2011
1 Citation (Scopus)

Characteristics of thermo-electromotive force, electric current and electric resistance in intermittent cutting process by face milling

Murata, M., Kurokawa, S., Ohnishi, O., Doi, T. & Uneda, M., Sep 26 2011, Advanced Manufacturing Technology. p. 1075-1078 4 p. (Advanced Materials Research; vol. 314-316).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electromotive force
Milling (machining)
Electric currents
Wear of materials
Process monitoring
1 Citation (Scopus)

Development of a laser-guided deep-hole measurement system with high-performance mechanical actuators

Katsuki, A., Sato, T., Ali, H., Sajima, T., Murakami, H., Berjaud, A., Ohnishi, O. & Doi, T., 2011, Proceedings - ASPE 2011 Annual Meeting. Vol. 52. p. 488-491 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical actuators
Lasers

Development of an optical measurement system for five-degrees-of-freedom error motions of a micro high-speed spindle

Murakami, H., Katsuki, A., Onikura, H. & Sajima, T., Dec 1 2011, Proceedings - ASPE 2011 Annual Meeting. Vol. 52. p. 524-527 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of U-anchor CFRP rod manufacturing machine

Tabuchi, D., Sajima, T., Onikura, H., Ohnishi, O., Krokawa, S., Doil, T. & Ohta, T., Jan 17 2011, Advances in Building Materials. p. 2125-2128 4 p. (Advanced Materials Research; vol. 168-170).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon fiber reinforced plastics
Anchors
Fiber reinforced plastics
Carbon fibers
Reinforcement