Research Output 1989 2019

Filter
Conference contribution
2011

In-process tool flank wear detection in intermittent cutting process by face milling

Murata, M., Kurokawa, S., Ohnishi, O., Uneda, M. & Doi, T., 2011, Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Milling (machining)
Wear of materials
Electromotive force
Electric currents
Contact resistance
9 Citations (Scopus)

Magnetic actuator using interaction between micro magnetic elements

Tsumori, F. & Brunne, J., 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems, MEMS 2011. p. 1245-1248 4 p. 5734658

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnetic actuators
Actuators
actuators
interactions
Magnetic fields

Scanning measurement and evaluation of gear tooth root and bottom profiles

Kurokawa, S., Kido, H., Taguchi, T., Okada, T., Ohnishi, O. & Doi, T., Sep 20 2011, Advances in Power Transmission Science and Technology. p. 838-841 4 p. (Applied Mechanics and Materials; vol. 86).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gear teeth
Gears
Scanning
Fatigue of materials

Study on formation of films by a spray deposition method for the organic thin film solar cells

Murata, M., Doi, T., Kurokawa, S., Ohnishi, O., Uneda, M., Iwahashi, T., Miyake, K., Miyachi, K. & Kobayashi, Y., 2011, Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Coatings
Butyric acid
Discharge (fluid mechanics)
Atmospheric humidity
Esters
2010
1 Citation (Scopus)

An optical fiber probe for 3-D micro metrology

Murakami, H., Katsuki, A., Onikura, H., Sajima, T., Kawagoishi, N., Kondo, E. & Honda, T., Dec 29 2010, Advances in Precision Engineering. p. 524-528 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical fibers
Ruby
Ray tracing
Optical systems
Microstructure
6 Citations (Scopus)

Basic characteristics of a simultaneous double-side CMP machine, housed in a sealed, pressure-resistance container

Kitamura, K., Doi, T., Kurokawa, S., Umezaki, Y., Matsukawa, Y., Ooki, Y., Hasegawa, T., Koshiyama, I., Ichikawa, K. & Nakamura, Y., Dec 29 2010, Advances in Precision Engineering. p. 61-65 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Containers
Gases
Polishing
Silicon wafers

Characteristics of silicon CMP performed in various high pressure atmospheres - Development of a new double-side simultaneous CMP machine housed in a high pressure chamber

Kitamura, K., Doi, T., Kurokawa, S., Ohnishi, O., Umezaki', Y., Yamazaki, T., Matsukawa, Y., Hasegawa, T., Koshiyama, I. & Ichikawa, K., 2010, Advanced Metallization Conference 2010. p. 278-279 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Silicon
Gases
Polishing
Silicon wafers

CMP characteristic on crystal orientations of single-crystal Si and high-precision planarization CMP of Poly-Si

Yoshiura, S., Doi, T., Kurokawa, S., Ohnishi, O. & Shinya, N., 2010, Advanced Metallization Conference 2010. p. 284-285 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Polysilicon
Crystal orientation
Single crystals
Processing

Comprehensive representation of pitch deviations suitable for engagement evaluation in different types of gears

Kurokawa, S., Ariura, Y. & Doi, T., 2010, 10th International Symposium on Measurement and Quality Control 2010, ISMQC 2010. p. 71-74 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Helical gears
Bevel gears
Spur gears
Gear teeth
1 Citation (Scopus)

Density gradient materials by direct metal laser sintering

Kang, H. G., Osada, T. & Miura, H., 2010, THERMEC 2009 Supplement. Vol. 89-91. p. 281-284 4 p. (Advanced Materials Research; vol. 89-91).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sintering
Lasers
Porosity
Metals
Powder metals
1 Citation (Scopus)

Development of a laser-guided deep-hole measurement system with lower production cost

Katsuki, A., Onikura, H., Sajima, T., Murakami, H., Satou, T., Nishi, H., Pietri, V. & Ali, H. M. D., 2010, Proceedings - ASPE 2010 Annual Meeting. Vol. 50. p. 396-399 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lasers
Costs

Development of a system for 3-d micro metrology using an optical fiber probe

Murakami, H., Katsuki, A., Onikura, H., Sajima, T., Kawagoishi, N. & Kondo, E., Dec 1 2010, Proceedings - ASPE 2010 Annual Meeting. p. 69-72 4 p. (Proceedings - ASPE 2010 Annual Meeting; vol. 50).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical fibers

Effect of microstructure on the rolling contact fatigue strength of 4600 steel P/M compacts

Tokuoka, T., Nakahara, Y., Kudo, K., Nishioka, T. & Miura, H., Jan 1 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Powders
steels
microstructure
Microstructure

Generation mechanism of residual stress on surface machined in turning assisted by ultrasonic vibration

Onikura, H., Kanda, T., Ohnishi, O. & Sajima, T., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. euspen, Vol. 2. p. 265-268 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibrations (mechanical)
residual stress
Residual stresses
ultrasonics
Ultrasonics
4 Citations (Scopus)

High temperature and fatigue properties of injection moulded superalloy compacts

Miura, H., Ikeda, H., Iwahashi, T. & Osada, T., 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Vol. 4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
injection molding
heat resistant alloys
Superalloys
Injection molding
1 Citation (Scopus)

Impact of high-speed image recognition of transition phenomenon of chip formation and chip flow in gear hobbing process

Umezaki, Y., Kurokawa, S. & Ariura, Y., Aug 18 2010, Measurement Technology and Intelligent Instruments IX. p. 189-193 5 p. (Key Engineering Materials; vol. 437).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Image recognition
Gears
Steel
High speed cameras
Video cameras
1 Citation (Scopus)

Improvement in drilling performance of micro compound tool

Ohnishi, O., Onikura, H., Eguchi, T., Aziz, M., Doi, T. & Kurokawa, S., Dec 29 2010, Advances in Precision Engineering. p. 96-100 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Drilling
Electroplating
Diamond
Peeling
Diamonds
4 Citations (Scopus)

Laser forming of Ti-6Al-7Nb alloy powder compacts for medical devices

Miura, H., Okawachi, K., Kang, H. G., Tsumori, F., Kurata, K. & Arimoto, N., Aug 18 2010, PRICM7. p. 2057-2060 4 p. (Materials Science Forum; vol. 654-656).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Honeycomb structures
honeycomb structures
biocompatibility
Biocompatibility
Powders
3 Citations (Scopus)

Polishing mechanism of glass substrates with its processing characteristics by cerium oxide and manganese oxide slurries

Yamazaki, T., Doi, T. K., Kurokawa, S., Isayama, S., Umezaki, Y., Matsukawa, Y., Kono, H., Akagami, Y., Yamaguchi, Y. & Kawase, Y., Dec 29 2010, Advances in Precision Engineering. p. 141-145 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Manganese oxide
Slurries
Cerium
Polishing
Abrasives

Semiconductor device cleaning with liquid aerosol nozzle using rotary atomizer method

Seike, Y., Miyachi, K., Kurokawa, S., Ohnishi, O. & Doi, T., 2010, Advanced Metallization Conference 2010. p. 296-297 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atomizers
Semiconductor devices
Aerosols
Cleaning
Nozzles

SiC-CMP characteristics under high pressure gas atmospheres using manganese slurry

Hasegawa, T., Doi, T. K., Kurokawa, S., Ohnishi, O., Kawase, Y., Yamaguchi, Y. & Kishii, S., 2010, Advanced Metallization Conference 2010. p. 161-162 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cytidine Monophosphate
Manganese
Gases
Manganese oxide
Slurries
2009

Development of a measuring system for micro hole accuracy using an optical fiber probe: Accuracy evaluation

Murakami, H., Katsuki, A., Onikura, H., Sajima, T. & Kondo, E., Jan 1 2009, Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. euspen, Vol. 2. p. 215-218 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical fibers
optical fibers
fibers
Fibers
evaluation

On-machine measurement of deep-hole accuracies: Measurement error and its compensation scheme

Katsuki, A., Onikura, H., Sajima, T., Murakami, H., Satou, T., Adachi, Y. & Duck, T., Jan 1 2009, Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. Brinksmeier, E., Burke, T., Van Brussel, H. & Spaan, H. (eds.). euspen, p. 419-422 4 p. (Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engine cylinders
Measurement errors
Machining
Boring machines (machine tools)
Plastics molding
2008

Development of a measuring system for a micro hole using an optical fiber probe

Murakami, H., Katsuki, A., Onikura, H. & Sajima, T., 2008, Proceedings of the 23rd Annual Meeting of the American Society for Precision Engineering, ASPE 2008 and the 12th ICPE.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical fibers

Magnetic properties of Fe-6.5Si powder injection molded materials

Miura, H., Tanaka, Y., Osada, T., Tokuoka, T., Nishioka, T. & Ikegaya, A., Dec 1 2008, Advances in Powder Metallurgy and Particulate Materials - 2008, Proceedings of the 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008. p. 4144-4152 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grain growth
Powders
Magnetic properties
injection
magnetic properties

Measurement of tooth pair deflections with ultra high resolution encoders and prediction of transmission error under load in high precision

Kurokawa, S. & Ariura, Y., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. Vol. 7. p. 99-108 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Encoder
Deflection
High Resolution
Gear teeth
Prediction

Micro drilling into brittle materials by chemically plated diamond tools

Park, H. K., Onikura, H., Ohnishi, O., Sajima, T. & Sharifuddin, A., 2008, Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008. euspen, Vol. 2. p. 465-468 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

brittle materials
Diamond
Brittleness
drilling
Diamonds
2007
3 Citations (Scopus)

Development of a laser-guided deep-hole evaluating probe: For 100 to 600 mm diameter hole

Katsuki, A., Onikura, H., Sajima, T., Park, H. K., Nakanishi, T., Ookubo, T., Murakami, H., Okada, N., Arita, M. & Mitsunaga, M., 2007, LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lasers
Servomotors
CCD cameras
Detectors

Development of a laser-guided deep-hole grinding tool: Performance test

Katsuki, A., Park, H. K., Onikura, H., Sajima, T., Nakanishi, T. & Murakami, H., 2007, Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grinding wheels
Lasers

Development of a laser-guided deep-hole measuring system: Measurements of roundness, cylindricity and straightness

Katsuki, A., Murakami, H., Onikura, H. & Sajima, T., 2007, LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Scanning
Lasers
1 Citation (Scopus)

Gas nitriding mechanism in titanium powder injection molded products

Osada, T., Miura, H., Yamagami, T., Nishiyabu, K. & Tanaka, S., Dec 1 2007, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 1 ed. p. 361-364 4 p. (Materials Science Forum; vol. 534-536, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

nitriding
Nitriding
Titanium
injection molding
Powders
1 Citation (Scopus)

Nano manufacturing of a small-tipped stylus for measurement of micro-machine elements with concave surfaces

Kurokawa, S. & Imamura, S., 2007, Proceedings of the 35th International MATADOR 2007 Conference. p. 7-10 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Etching
Wet etching
Reactive ion etching
Photolithography
Electron beams
2006

Development of a laser-guided deep-hole evaluating probe: An exchangeable measuring unit for a counter-boring head

Katsuki, A., Onikura, H., Sajima, T., Zhen, J. G., Park, H. K. & Murakami, H., 2006, Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. euspen, Vol. 1. p. 528-531 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boring
Engine cylinders
counters
Lasers
probes

Development of an ultrasonic vibration spindle with an aerostatic bearing for micro drilling

Onikura, H., Ohnishi, O., Sajima, T., Koga, T. & Moriya, M., Jan 1 2006, Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. euspen, Vol. 1. p. 321-324 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
aerostatics
spindles
drilling
Vibrations (mechanical)
2005
3 Citations (Scopus)

Development of a practical high-performance laser-guided deep-hole boring tool: Boring of steel workpieces

Katsuki, A., Onikura, H., Sajima, T., Park, H. K., Zhen, J. G. & Murakami, H., 2005, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boring tools
Boring
Steel
Lasers
2002
1 Citation (Scopus)

Effect of nesting of fiber bundles on micro fracture of laminated woven fabric composite

Osada, T., Nakai, A. & Hamada, H., Jan 1 2002, Textile Engineering. American Society of Mechanical Engineers (ASME), p. 37-40 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fibers
Composite materials
Laminating
Tensile testing
Optical microscopy