Research Output 1982 2019

Filter
Conference contribution
2017

Joining of UHTC composites using metallic interlayer

Saito, N., Esposito, L., Yoneima, T., Hayashi, K. & Nakashima, K., Jan 1 2017, Joining Technologies for Composites and Dissimilar Materials - Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Backman, D., Patterson, E. & Cloud, G. L. (eds.). Springer New York LLC, p. 99-106 8 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 10).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joining
Composite materials
Surface chemistry
Temperature
Reaction products
2015

Effect of coke breeze distribution on coke combustion rate of the quasi-particle

Ogi, H., Maeda, T., Ohno, K-I. & Kunitomo, K., Jan 1 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Association for Iron and Steel Technology, AISTECH, Vol. 1. p. 1382-1393 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Coke

Effect of simulant ash on wetting behavior of liquid iron on carbonaceous material substrate

Ohno, K-I., Miyake, T., Yano, S., Nguyen, C. S., Maeda, T. & Kunitomo, K., Jan 1 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Association for Iron and Steel Technology, AISTECH, Vol. 1. p. 603-610 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ashes
Wetting
Iron
Liquids
Substrates

Wettability of graphite substrates against molten CaO-SiO2-Al2O3-MgO slags

Sukenaga, S., Yasutake, K., Saito, N. & Nakashima, K., Jan 1 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Association for Iron and Steel Technology, AISTECH, p. 734-738 5 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Slags
Contact angle
Wetting
Molten materials
Graphite
2013

Effect of nano-sized particles on the mechanical properties of Y2O3

Razavi Khosroshahi, H., Liu, X., Saito, N., Nakashima, K. & Kaneko, K., Apr 10 2013, Advanced Materials Science and Technology. p. 44-47 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

mechanical properties
Mechanical properties
composite materials
Composite materials
toughness
2012

Effect of molecular weight difference between several gases on gas diffusion behaviors in air flow through packed bed

Ohno, K-I., Nishioka, K., Munuesue, K., Maeda, T. & Shimizu, M., Dec 1 2012, 6th Int. Congress on the Science and Technology of Ironmaking 2012, ICSTI 2012 - Including Proceedings from the 42nd Ironmaking and Raw Materials Seminar, and the 13th Brazilian Symp. on Iron Ore. Vol. 2. p. 1113-1120 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion in gases
Packed beds
Gases
Molecular weight
Air

Effect of woody biomass on reduction behavior of iron oxide

Yokota, K., Kunitomo, K., Ohno, K. I., Okazaki, J., Nishimura, T. & Kogure, S., Dec 1 2012, 6th International Congress on the Science and Technology of Ironmaking 2012, ICSTI 2012 - Including Proc. from the 42nd Ironmaking and Raw Materials Seminar, and the 13th Brazilian Symp. on Iron Ore. p. 2105-2112 8 p. (6th Int. Congress on the Science and Technology of Ironmaking 2012, ICSTI 2012 - Including Proceedings from the 42nd Ironmaking and Raw Materials Seminar, and the 13th Brazilian Symp. on Iron Ore; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iron oxides
Biomass
Blast furnaces
Reducing Agents
Reducing agents
2011

Effect of PEG on dissolution of Zn deposited from impurity-containing solutions

Nakano, H., Oue, S., Fukushima, H., Kobayashi, S. & Nishina, K., Dec 1 2011, Proceedings - European Metallurgical Conference, EMC 2011. p. 985-998 14 p. (Proceedings - European Metallurgical Conference, EMC 2011; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polyethylene glycols
Dissolution
Impurities
Hydrogen
Current density
2010
1 Citation (Scopus)

Effect of equal channel angular pressing on the pitting corrosion resistance on the aluminum alloys with/without anodization

Nakano, H., Son, I. J., Oue, S., Kobayashi, S., Fukushima, H. & Horita, Z., Feb 9 2010, THERMEC 2009. p. 1989-1994 6 p. (Materials Science Forum; vol. 638-642).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Equal channel angular pressing
pitting
pressing
Pitting
corrosion resistance
2009

Degradation of polymer additives during long-term Zn electrowinning

Nakano, H., Oue, S., Fukushima, H., Kobayashi, S. & Nishina, K., Dec 1 2009, Proceedings - European Metallurgical Conference, EMC 2009. Vol. 3. p. 1097-1110 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrowinning
Gelatin
Electrolysis
Polymers
Molecular weight

Synergistic effect of polymer additives and chloride ions and their degradation in copper electrorefinning

Nakano, H., Oue, S., Kuboyama, H., Fukushima, H. & Hayashibe, Y., 2009, The Minerals, Metals and Materials Society - 3rd International Conference on Processing Materials for Properties 2008, PMP III. Vol. 1. p. 65-70 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gelatin
Chlorides
Copper
Polymers
Electrolysis
2008
1 Citation (Scopus)

Generation mechanisms of non-metallic inclusions in high-cleanliness steel

Kawakami, K., Taniguchi, T. & Nakashima, K., Dec 1 2008, Proceedings ICS 2008: The 4th International Congress on the Science and Technology of Steelmaking. p. 399-402 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ladle metallurgy
Steelmaking
Steel

Viscosity of steel-making slag containing iron oxide

Sukenaga, S., Saito, N., Nakashima, J. & Nakashima, K., Dec 1 2008, Proceedings ICS 2008: The 4th International Congress on the Science and Technology of Steelmaking. p. 562-565 4 p. (Proceedings ICS 2008: The 4th International Congress on the Science and Technology of Steelmaking).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Iron oxides
Slags
Physical properties
Viscosity
2007
1 Citation (Scopus)

Effect of mo powder surface condition on fabrication of Mo-SiO2 functionally graded materials with slipcasting method

Umemoto, A., Hayashi, K., Hayano, K., Saito, N., Kaneko, K. & Nakashima, K., Dec 1 2007, Proceedings of the 2nd Int. Conf. Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials. p. 219-224 6 p. (Ceramic Transactions; vol. 198).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Functionally graded materials
Discharge lamps
Powders
Fabrication
Electric lamps

Effect of polymer additives on zinc electrowinning

Nakano, H., Oue, S., Fukushima, H. & Kobayashi, S., Dec 1 2007, Proceedings - European Metallurgical Conference, EMC 2007. p. 1535-1547 13 p. (Proceedings - European Metallurgical Conference, EMC 2007; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electrowinning
Zinc
Polymers
Electrolysis
Polarization
2006
4 Citations (Scopus)

Effect of equal-channel angular pressing on the pitting corrosion resistance of Al alloy

Son, I. J., Nakano, H., Oue, S., Kobayashi, S., Fukushima, H. & Horita, Z., Dec 1 2006, Nanomaterials by Severe Plastic Deformation, NanoSPD3 - Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastics Deformation. p. 487-492 6 p. (Materials Science Forum; vol. 503-504).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Equal channel angular pressing
pitting
pressing
Pitting
corrosion resistance
4 Citations (Scopus)

Grain growth of β-silicon nitride in RE-Mg-Si-O-N liquid

Saito, N., Nakata, D., Nakashima, K. & Umemoto, A., Jul 26 2006, Developments and Applications of Advanced Engineering Ceramics and Composites - Proceedings of the 6th Pacific Rim Conference on Ceramic and Glass Technology, PacRim6. p. 73-80 8 p. (Ceramic Transactions; vol. 192).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon nitride
Grain growth
Crystals
Liquids
Heat treatment

Mo-SiO2 functionally graded materials for high intensity discharge lamp

Umemoto, A., Hayashi, K., Nakashima, K., Saito, N., Kaneko, K. & Ogi, K., Jul 24 2006, Developments and Applications of Advanced Engineering Ceramics and Composites - Proceedings of the 6th Pacific Rim Conference on Ceramic and Glass Technology, PacRim6. p. 53-58 6 p. (Ceramic Transactions; vol. 192).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Discharge lamps
Functionally graded materials
Electric lamps
Fused silica
Cooling systems
2005
7 Citations (Scopus)

Clean and reliable bearing steel

Kawakami, K., Takada, S., Takasu, I. & Nakashima, K., 2005, ICS 2005 - Proceedings of the 3rd International Congress on the Science and Technology of Steelmaking. p. 209-220 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Steel
2004
1 Citation (Scopus)

Formation and physical property of molten calcium ferrite in iron ore sinter

Maeda, T., Nakashima, K. & Shimizu, M., Dec 1 2004, 2nd International Meeting on Ironmaking and 1st International Symposium on Iron Ore and parallel event - 5th Japan-Brazil Symposium on Dust Processing-Energy-Environment on Metallurgical Industries. Vol. 1. p. 571-577 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iron ore sinter
Ferrite
Molten materials
Calcium
Physical properties
2003

Microscopic observation of iron carburization by coal under the presence of liquid slag

Ohno, K-I., Nagasaka, T. & Hino, M., Oct 16 2003, Yazawa International Symposium: Metallurgical and Materials Processing: Principles and Techologies; Materials Processing Fundamentals and New Technologies. Kongoli, F., Itagaki, K., Yamauchi, C., Sohn, H. Y., Kongoli, F., Itagaki, K., Yamauchi, C. & Sohn, H. Y. (eds.). p. 815-824 10 p. (Yazawa International Symposium: Metallurgical and Materials Processing: Principles and Techologies; Materials Processing Fundamentals and New Technologies; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Slags
Coal
Iron
Liquids
Graphite
2000
6 Citations (Scopus)

Anomalous codeposition behavior of Fe-Ni and Zn-Ni alloys from methanol baths

Kawano, S., Ohgai, T., Kobayashi, S., Nakano, H., Tsuru, T., Akiyama, T., Fukushima, H. & Hara, K., Dec 1 2000, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 769-772 4 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Methanol
Electrodeposition
Precious metals
Deposition rates
Electrolysis
1 Citation (Scopus)

Magnetic properties of electrodeposited Ni-Fe alloy films

Hara, K., Yamashita, S., Kaku, H., Ikeda, M., Kawano, S., Ohgai, T., Akiyama, T., Nakano, H. & Fukushima, H., Dec 1 2000, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 239-242 4 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnetic properties
Sensors
Magnetometers
Hysteresis loops
Coercive force
1 Citation (Scopus)

Reduction rate of chromite ore by Fe-C-Si melts

Nakasuga, T., Sun, H., Nakashima, K. & Mori, K., Dec 1 2000, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 553-558 6 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chromite
Ores
Liquids
Silicon
Slags
1 Citation (Scopus)

The oxidation rate of Pb and Ni in the copper by slag

Nakashima, K., Yamamoto, K., Shibata, E., Tahori, H. & Mori, K., Dec 1 2000, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 839-844 6 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Slags
Copper
Oxidation
Activity coefficients
Chemical analysis