Research Output 2009 2018

  • 22 Article
  • 1 Conference contribution
  • 1 Review article
2018
1 Citation (Scopus)

A Correction to the Stress–Strain Curve During Multistage Hot Deformation of 7150 Aluminum Alloy Using Instantaneous Friction Factors

Jiang, F., Tang, J., Fu, D., Huang, J. & Zhang, H., Jun 1 2018, In : Journal of Materials Engineering and Performance. 27, 6, p. 3083-3090 8 p.

Research output: Contribution to journalArticle

Hot working
Aluminum alloys
Friction
Hot pressing
Plastic flow
9 Citations (Scopus)

Correction of elastic anisotropy in williamson-hall plots by diffraction young's modulus and direct fitting method

Takaki, S., Jiang, F., Masumura, T. & Tsuchiyma, T., Jan 1 2018, In : isij international. 58, 4, p. 769-775 7 p.

Research output: Contribution to journalReview article

Anisotropy
Diffraction
Elastic moduli
Iron
Yield stress
1 Citation (Scopus)

Correction of the Williamson-Hall plots by the diffraction Young's modulus

Takaki, S., Akama, D., Jiang, F. & Tsuchiyma, T., Mar 1 2018, In : Zairyo/Journal of the Society of Materials Science, Japan. 67, 3, p. 383-388 6 p.

Research output: Contribution to journalArticle

modulus of elasticity
Diffraction
Elastic moduli
plots
elastic anisotropy
6 Citations (Scopus)

Effect of the surface layer strained by mechanical grinding on x-ray diffraction analysis

Jiang, F., Hirata, K., Masumura, T., Tsuchiyma, T. & Takaki, S., Jan 1 2018, In : isij international. 58, 2, p. 376-378 3 p.

Research output: Contribution to journalArticle

Sanders
Steel
Full width at half maximum
X ray diffraction analysis
Diffraction
5 Citations (Scopus)

Non-isothermal precipitation kinetics and its effect on hot working behaviors of an Al–Zn–Mg–Cu alloy

Jiang, F. & Zhang, H., Feb 1 2018, In : Journal of Materials Science. 53, 4, p. 2830-2843 14 p.

Research output: Contribution to journalArticle

Hot working
Precipitates
Kinetics
Hardness testing
Heating
2017
1 Citation (Scopus)

Effect of heat treatments before cold rolling on microstructure and mechanical properties of 6016-T4P aluminum alloy sheet

Su, J., Zhang, H., Teng, J., Jiang, F. & Sun, Y., Jan 25 2017, In : Cailiao Daobao/Materials Review. 31, 1, p. 87-91 5 p.

Research output: Contribution to journalArticle

Cold rolling
Aluminum alloys
Heat treatment
Mechanical properties
Microstructure
2016
5 Citations (Scopus)

Characterization of dynamic microstructural evolution of AA7150 aluminum alloy at high strain rate during hot deformation

Jiang, F., Zhang, H., Weng, S. C. & Fu, D. F., Jan 1 2016, In : Transactions of Nonferrous Metals Society of China (English Edition). 26, 1, p. 51-62 12 p.

Research output: Contribution to journalArticle

Hot working
Microstructural evolution
softening
strain rate
aluminum alloys
13 Citations (Scopus)

Characterizing precipitate evolution of an Al-Zn-Mg-Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring

Jiang, F., Zurob, H. S., Purdy, G. R. & Zhang, H., Jul 1 2016, In : Materials Characterization. 117, p. 47-56 10 p.

Research output: Contribution to journalArticle

Precipitates
precipitates
heat treatment
Aging of materials
Heat treatment
5 Citations (Scopus)

Microstructural Characteristic of the Al-Fe-Cu Alloy During High-Speed Repetitive Continuous Extrusion Forming

Hu, J., Teng, J., Ji, X., Kong, X., Jiang, F. & Zhang, H., Nov 1 2016, In : Journal of Materials Engineering and Performance. 25, 11, p. 4769-4775 7 p.

Research output: Contribution to journalArticle

Extrusion
Dynamic recrystallization
Mechanical properties
Grain refinement
Microstructural evolution
22 Citations (Scopus)

Residual stress relief in Al-Zn-Mg-Cu alloy by a new multistage interrupted artificial aging treatment

Sun, Y., Jiang, F., Zhang, H., Su, J. & Yuan, W., Feb 15 2016, In : Materials and Design. 92, p. 281-287 7 p.

Research output: Contribution to journalArticle

Stress relief
Residual stresses
Aging of materials
Corrosion resistance
Mechanical properties
2015
12 Citations (Scopus)

Constitutive characteristics and microstructure evolution of 7150 aluminum alloy during isothermal and non-isothermal multistage hot compression

Jiang, F., Zhang, H., Su, J. & Sun, Y., Jun 1 2015, In : Materials Science and Engineering A. 636, p. 459-469 11 p.

Research output: Contribution to journalArticle

Hot pressing
Plastic flow
aluminum alloys
Aluminum alloys
microstructure
3 Citations (Scopus)

In situ characterization of precipitate formation and dissolution in an Al-Zn-Mg-Cu alloy by electrical resistivity measurement

Jiang, F., Zurob, H. S., Purdy, G. R. & Zhang, H., Jan 1 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M., Botton, G., Howe, J., Sinclair, C. & Zurob, H. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 727-734 8 p. (PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Precipitates
Dissolution
Kinetics
Differential scanning calorimetry
Volume fraction
15 Citations (Scopus)

Microstructures and properties of Al-Mg-SI alloy overhead conductor by horizontal continuous casting and continuous extrusion forming process

Ji, X., Zhang, H., Luo, S., Jiang, F. & Fu, D., Sep 1 2015, In : Materials Science and Engineering A. 649

Research output: Contribution to journalArticle

International System of Units
Continuous casting
Extrusion
conductors
microstructure
10 Citations (Scopus)

Static softening following multistage hot deformation of 7150 aluminum alloy: Experiment and modeling

Jiang, F., Zurob, H. S., Purdy, G. R. & Zhang, H., Nov 11 2015, In : Materials Science and Engineering A. 648, p. 164-177 14 p.

Research output: Contribution to journalArticle

Hot working
Coarsening
softening
aluminum alloys
Aluminum alloys
1 Citation (Scopus)

Tensile properties and work hardening behavior of continuous-extruded Al-1.1Mg-0.3Cu alloy

Zhang, H., Luo, S. & Jiang, F., Jun 25 2015, In : Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences. 42, 6, p. 60-65 6 p.

Research output: Contribution to journalArticle

Tensile properties
Strain hardening
Extrusion
Tensile testing
Processing
2014
2 Citations (Scopus)

Characterization of dynamic microstructure evolution during hot deformation of Al-4.10Cu-1.42Mg-0.57Mn-0.12Zr alloy

Liu, C., Zhang, H. & Jiang, F., Nov 1 2014, In : Transactions of Nonferrous Metals Society of China (English Edition). 24, 11, p. 3477-3485 9 p., 63491.

Research output: Contribution to journalArticle

Hot working
microstructure
softening
dislocation
Microstructure
8 Citations (Scopus)

Comparative hot deformation characters of Al-Mn-Mg-RE alloy and Al-Mn-Mg-RE-Ti alloy

Jiang, F., Zhang, H., Ji, X., Meng, X. & Li, L., Feb 10 2014, In : Materials Science and Engineering A. 595, p. 10-17 8 p.

Research output: Contribution to journalArticle

Hot working
Hot pressing
Light transmission
Plastic flow
Rare earths
5 Citations (Scopus)

Effects of Ti addition on the microstructures and mechanical properties of the Al-Mn-Mg-RE alloy

Jiang, F., Zhang, H., Meng, X. & Li, L., Jan 1 2014, In : Materials and Design. 55, p. 280-285 6 p.

Research output: Contribution to journalArticle

Mechanical properties
Microstructure
Ductile fracture
Brittle fracture
Optical microscopy
1 Citation (Scopus)

Evolution of microstructure and properties of new Al-Mn alloy during homogenization treatment

Li, X. F., Zhang, H. & Jiang, F., Jan 1 2014, In : Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals. 24, 2, p. 380-386 7 p.

Research output: Contribution to journalArticle

homogenizing
ingots
microstructure
Microstructure
Hardness
2013
17 Citations (Scopus)

Flow stress and microstructural evolution of the horizontal continuous casting Al-0.96Mn-0.38Si-0.18Fe alloy during hot compression

Zhang, H., Jiang, F., Shang, X. & Li, L., Jun 1 2013, In : Materials Science and Engineering A. 571, p. 25-32 8 p.

Research output: Contribution to journalArticle

Microstructural evolution
Continuous casting
Hot pressing
Plastic flow
strain rate
7 Citations (Scopus)

Hot deformation behavior and processing map of 4045 aluminum alloy

Zhang, H., Wu, H. J. & Jiang, F., Aug 1 2013, In : Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences. 40, 8, p. 83-89 7 p.

Research output: Contribution to journalArticle

Hot working
Aluminum alloys
Strain rate
Processing
Microstructural evolution
2012
29 Citations (Scopus)

The kinetics of dynamic and static softening during multistage hot deformation of 7150 aluminum alloy

Jiang, F., Zhang, H., Li, L. & Chen, J., Aug 30 2012, In : Materials Science and Engineering A. 552, p. 269-275 7 p.

Research output: Contribution to journalArticle

Hot working
softening
aluminum alloys
Aluminum alloys
Kinetics
2011
7 Citations (Scopus)

Recrystallization of 3104 aluminum alloy during compression at elevated temperature

Jiang, F., Zhang, H., Meng, C. B. & Li, L. X., Mar 1 2011, In : Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment. 32, 3, p. 52-55 4 p.

Research output: Contribution to journalArticle

aluminum alloys
Strain rate
Aluminum alloys
Compaction
strain rate
2009
12 Citations (Scopus)

Deformation rule of steel/aluminum metal-laminate material during hot roll bonding

Li, M. Q., Jiang, F., Zhang, H. & Li, L. X., Apr 1 2009, In : Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals. 19, 4, p. 644-648 5 p.

Research output: Contribution to journalArticle

Roll bonding
Steel
Aluminum
laminates
Laminates