Research Output 1976 2019

Filter
Conference contribution
2009

Effect of Prosthesis Stiffness and Implant Length on the Stress State in Mandibular Bone with Dental Implants

Todo, M., Irie, K., Matsushita, Y. & Koyano, K., Dec 1 2009, 13th International Conference on Biomedical Engineering - ICBME 2008. Vol. 23. p. 1611-1614 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dental prostheses
Bone
Stiffness
Stress analysis
Polymers
2 Citations (Scopus)

Strain distribution around dental implants in cortical/cancellous bone models using DIC method

Morita, Y., Qian, L., Todo, M., Matsushita, Y. & Arakawa, K., Dec 1 2009, Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009. Vol. 2. p. 1365-1370 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dental prostheses
Bone
Ligaments
Materials properties
Mastication
2008

Characterization of biodegradable PLLA/PCL and PLLA/PBSL polymeric blends

Vilay, V., Mariatti, M., Ahmad, Z., Pasomsouk, K. & Todo, M., Dec 1 2008, Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008. p. 247-250 4 p. (Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lactic acid
Lactic Acid
Biodegradable polymers
Polymers
bionole

Deformation measurements of periodontal tissues under dental occlusal forces

Morita, Y., Uchino, M., Todo, M., Matsushita, Y., Arakawa, K. & Koyano, K., Dec 22 2008, Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008. Vol. 4. p. 1972-1978 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tissue
Recovery
Correlation methods
Testing
Unloading
1 Citation (Scopus)

Shrinkage deformation measurement of dental restorative resin composites

Furukawa, T., Arakawa, K., Morita, Y. & Uchino, M., Dec 22 2008, Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008. Vol. 1. p. 481-488 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Resins
Composite materials
Polymerization
Correlation methods
CCD cameras

Toughening of HA/PLLA biocomposites due to microstructural modification

Todo, M., Kagawa, T., Takenoshita, Y. & Myoui, A., Dec 1 2008, 8th World Biomaterials Congress 2008. Vol. 2. 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Toughening
2007

Effect of nano- and micro-particles on fracture characteristic of HA/PLLA composites

Takayama, T., Todo, M., Takenoshita, Y. & Myoui, A., 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace".

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Debonding
Composite materials
Crack initiation
Bending strength
Mechanical properties

Effect of press process on the fracture behavior of HA/PLLA biocomposite material

Kagawa, T., Todo, M., Takenoshita, Y. & Myoui, A., 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace".

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Scanning electron microscopy
Toughening
Bending strength
Toughness
Mechanical properties
1 Citation (Scopus)

Evaluation of the power output of a wind turbine with a brimmed diffuser shroud in fluctuating flows

Gonzalez, A. S. R., Ohya, Y., Karasudani, T., Iba, S. & Watanabe, K., Dec 1 2007, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART B ed. Vol. 2 FORA. p. 1063-1068 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

shrouds
wind turbines
diffusers
Wind turbines
evaluation
1 Citation (Scopus)

Fracture characterization of biodegradable PLLA polymer blends

Todo, M., Harada, A. & Tsuji, H., 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace".

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biodegradable polymers
Polymer blends
Crack tips
Impact resistance
Ductile fracture

Wind turbine tower optimization method using genetic algorithm

Yoshida, S., Dec 1 2007, European Wind Energy Conference and Exhibition 2007, EWEC 2007. p. 1651-1655 5 p. (European Wind Energy Conference and Exhibition 2007, EWEC 2007; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wind turbines
Towers
Turbines
Genetic algorithms
Flanges
2006
2 Citations (Scopus)

Activation treatment of ion implanted dopants using hybrid super RTA equipment

Kinoshita, A., Senzaki, J., Katou, M., Harada, S., Okamato, M., Nishizawa, S., Fukuda, K., Morigasa, F., Endou, T., Isii, T. & Yashima, T., Dec 1 2006, Silicon Carbide and Related Materials - 2005, - Proceedings of the International Conference on Silicon Carbide and Related Materials -2005. PART 2 ed. p. 803-806 4 p. (Materials Science Forum; vol. 527-529, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rapid thermal annealing
Chemical activation
Doping (additives)
Ions
Annealing

Fracture property and fracture mechanism of PLLA/PBSC polymer blend

Todo, M., Harada, A. & Arakawa, K., Oct 18 2006, Polymer Preprints, Japan - 55th SPSJ Annual Meeting. 1 ed. Vol. 55. 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polymer blends
Solubility
Biodegradable polymers
Fracture energy
Scanning electron microscopy
3 Citations (Scopus)

Theree-dimensional power calculation method which improves estimation accuracy

Yoshida, S., Kato, H. & Ono, T., Dec 1 2006, European Wind Energy Conference and Exhibition 2006, EWEC 2006. p. 1269-1272 4 p. (European Wind Energy Conference and Exhibition 2006, EWEC 2006; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wind turbines
Farms
Power generation
2005

Fracture energy measurements of biodegradable pol(lactic acid)

Arakawa, K., Mada, T., Park, S. D. & Todo, M., Dec 1 2005, Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. p. 1845-1850 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric power measurement
Fracture energy
Lactic acid
Energy release rate
Dilatometers

Microscopic observation and modeling of toughening mechanism in rubber-modified polymer

Todo, M. & Arakawa, K., Dec 1 2005, 11th International Conference on Fracture 2005, ICF11. Vol. 2. p. 1318-1323 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Toughening
rubber
Crack tips
Rubber
crack
1985

DEPENDENCE OF CRACK VELOCITY AND ACCELERATION ON DYNAMIC STRESS INTENSITY FACTORS FOR FAST CRACKS IN GLASSY POLYMERS.

Takahashi, K. & Arakawa, K., 1985, Unknown Host Publication Title. Plastics & Rubber Inst

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stress intensity factors
Cracks
Polymers
High speed photography