Research Output 1981 2020

Filter
Conference contribution

A case study of a cooling pipe for a pre-cooler used in a 70-MPa hydrogen station

Okazaki, S., Hamada, S., Itoga, H., Matsunaga, H., Nakamura, M. & Matsuoka, S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pipe
Cooling
Hydrogen
Pipe joints
Gases
1 Citation (Scopus)

Analysis of small fatigue crack in Al-Mg-Si aluminum alloy

Shikama, T., Yoshihara, S., Takahashi, Y. & Noguchi, H., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 313-318 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

aluminum alloys
Aluminum alloys
cracks
S-N diagrams
Fatigue of materials

Applicability of a FIB-notch as a small initial crack for fatigue limit evaluation

Sakamoto, J., Takahashi, Y. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Focused ion beams
Fatigue of materials
Cracks
Defects
Axial loads

Application of Diffraction-Amalgamated Grain Boundary Tracking (DAGT) to fatigue crack propagation behavior in high strength aluminum alloy

Li, H., Toda, H., Uesugi, K., Takeuchi, A., Suzuki, Y. & Kobayashi, M., Jan 1 2014, 3DMS 2014 - Proceedings of the 2nd International Congress on 3D Materials Science. Pollock, T., Poulsen, H. F., Rollett, A., Uchic, M., Rollett, A., Bernard, D., Rollett, A., Buffiere, J-Y., Rollett, A. & Pollock, T. (eds.). John Wiley and Sons Inc., p. 91-96 6 p. (3DMS 2014 - Proceedings of the 2nd International Congress on 3D Materials Science).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength alloys
Fatigue crack propagation
Aluminum alloys
Grain boundaries
Diffraction

Assessment of deformation behavior of polycrystalline aluminum using diffraction-amalgamated grain-boundary tracking (DAGT) technique

Toda, H., Kamiko, T., Uesugi, K., Takeuchi, A., Suzuki, Y. & Kobayashi, M., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 57-62 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
Grain boundaries
grain boundaries
Diffraction
aluminum
1 Citation (Scopus)

A study on evaluation scheme of effectiveness of incident-reporting system with a quantitative index of enthusiasm for reporting

Otsuka, Y. & Noguchi, H., Dec 1 2006, Proceedings of the European Safety and Reliability Conference 2006, ESREL 2006 - Safety and Reliability for Managing Risk. p. 37-44 8 p. (Proceedings of the European Safety and Reliability Conference 2006, ESREL 2006 - Safety and Reliability for Managing Risk; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

reporting system
incident
evaluation
Managers
hospital organization

Change of crack initiation and propagation modes in hydrogenrelated failure of a precipitation-strengthened NI-based superalloy 718 under internal and external hydrogen conditions

Ogawa, Y., Takakuwa, O., Okazaki, S., Matsuoka, S. & Matsunaga, H., Jan 1 2019, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Superalloys
Crack initiation
Crack propagation
Hydrogen
Ductility

Damage behavior of micro segregation in Al-Si alloy by use of phase contrast imaging

Yamada, R., Toda, H., Besel, Y., Uesugi, K. & Akihisa, T., Jan 1 2016, 72nd World Foundry Congress, WFC 2016. The WFO (The World Foundry Organization Ltd), p. 379-380 2 p. (72nd World Foundry Congress, WFC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Imaging techniques
Tomography
X rays
Processing
Synchrotrons
1 Citation (Scopus)

Deformation microstructures in a two-phase stainless steel during large strain deformation

Tsuzaki, K., Belyakov, A. & Kimura, Y., Dec 1 2006, Nanomaterials by Severe Plastic Deformation, NanoSPD3 - Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastics Deformation. p. 305-310 6 p. (Materials Science Forum; vol. 503-504).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
stainless steels
Stainless steel
swaging
microstructure

Determination of effective stress intensity factor range of mode ii fatigue crack propagation using improved experimental method

Liu, M. & Hamada, S., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Stress intensity factors
Bearings (structural)
Fatigue of materials
Jigs

Determination of α / γ phase boundaries in the Fe-Cr-Ni-Mn quaternary system with a diffusion-multiple method

Shuro, I., Kobayashi, S., Nakamura, T. & Tsuzaki, K., Jan 1 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 577-582 6 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase boundaries
Chromium
Manganese
Nickel
Chemical analysis

Ductile to brittle transition in magnesium alloy with a crack

Ishina, T., Hamada, S. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnesium alloys
Cracks
Temperature
Automobile engines
Oxides
1 Citation (Scopus)

Dynamic recrystallization mechanisms operating under different processing conditions

Belyakov, A., Dudova, N., Tikhonova, M., Sakai, T., Tsuzaki, K. & Kaibyshev, R., Jan 30 2012, THERMEC 2011. p. 2704-2709 6 p. (Materials Science Forum; vol. 706-709).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic recrystallization
Hot working
grain size
Plastic flow
hot working
1 Citation (Scopus)

Effect of friction stir welding condition on fatigue limit of welded non-combustible Mg alloy

Hayashi, K., Hamada, S., Shigematsu, I., Sakamoto, M. & Noguchi, H., Jan 1 2012, Advances in Fracture and Damage Mechanics X. p. 311-314 4 p. (Key Engineering Materials; vol. 488-489).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction stir welding
Welding
Fatigue of materials
Defects
Hardness

Effect of gaseous hydrogen on cyclic slip behavior around a stage i fatigue crack tip in an iron alloy

Takahashi, Y., Sakamoto, J., Tanaka, M., Higashida, K. & Noguchi, H., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iron alloys
Crack tips
Helium
Hydrogen
Cracks

Effect of hydrogen gas on the growth of small fatigue crack in JIS-SCM435

Itoga, H., Matsunaga, H. & Matsuoka, S., Jan 1 2014, 11th International Fatigue Congress. Trans Tech Publications, p. 942-947 6 p. (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Cracks
Hydrogen
Gases
Fatigue of materials

Effect of hydrogen on microscopic deformation process near stage II fatigue crack tip

Takahashi, Y., Tanaka, M., Higashida, K. & Noguchi, H., Dec 1 2009, Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials. p. 203-210 8 p. (Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

crack tips
Crack tips
Hydrogen
slip
Cracks
2 Citations (Scopus)

Effect of micro-voids on crack initiation and propagation in bending deformation of Al-Mg-Si alloy sheet

Yamamoto, Y., Asano, M., Yoshida, H., Kobayashi, M. & Toda, H., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 325-330 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

crack initiation
crack propagation
Crack initiation
voids
Crack propagation
1 Citation (Scopus)

Effect of occasional shear loading on fatigue crack growthin 7075 aluminum alloy

Makizaki, M., Matsunaga, H., Yanase, K. & Endo, M., Apr 10 2013, Advanced Materials Science and Technology. p. 264-267 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

aluminum alloys
Aluminum alloys
Crack propagation
cracks
shear
1 Citation (Scopus)

Effect of orientation of small defects on fatigue limit of steels

Lorenzino, P., Okazaki, S., Matsunaga, H. & Murakami, Y., Jan 1 2014, FDMD II - JIP 2014 - Fatigue Design and Material Defects. EDP Sciences, 07001. (MATEC Web of Conferences; vol. 12).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Fatigue of materials
Defects
Cracks
2 Citations (Scopus)

Effect of prestrain on fatigue crack growth of age-hardened Al 6061-T6

Ikematsu, K., Mishima, T., Kang, M., Aono, Y. & Noguchi, H., Jan 1 2009, Fatigue and Fracture Mechanics: 36th Volume. American Society for Testing and Materials, p. 561-573 13 p. (ASTM Special Technical Publication; vol. 1508 STP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Fatigue of materials
Plastic deformation
Fatigue cracks
8 Citations (Scopus)

Effect of processing temperature on microstructure development during ECAP of Al-Mg-Sc alloy

Sitdikov, O., Avtokratova, E., Sakai, T., Tsuzaki, K., Kaibyshev, R. & Watanabe, Y., Jan 1 2008, Materials Science Forum - Nanomaterials by Severe Plastic Deformation 4 - 4th International Conference on Nanomaterials by Severe Plastic Deformation. Estrin, Y., Estrin, Y. & Maier, H. J. (eds.). Trans Tech Publications Ltd, p. 481-486 6 p. (Materials Science Forum; vol. 584-586 PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Equal channel angular pressing
pressing
microstructure
Microstructure
Processing
4 Citations (Scopus)

Effect of test frequency on hydrogen-enhanced fatigue crack growth in type 304 stainless steel and ductile cast iron

Matsunaga, H., Nakashima, T., Yamada, K., Matsuo, T., Yamabe, J. & Matsuoka, S., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Cast iron
Stainless steel
Hydrogen
Crack tips
1 Citation (Scopus)

Effects of external and internal hydrogen on tensile properties of austenitic stainless steels containing additive elements

Itoga, H., Matsunaga, H., Yamabe, J. & Matsuoka, S., Jan 1 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Tensile properties
Chemical elements
Hydrogen
Nitrogen

Effects of gaseous hydrogen on fatigue crack growth behavior of low carbon steel

Lee, D., Nishikawa, H. A., Oda, Y. & Noguchi, H., Jun 14 2010, Proceedings of the ASME Pressure Vessels and Piping Conference 2009. p. 499-507 9 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low carbon steel
Fatigue crack propagation
Hydrogen
Ductile fracture
Gases
1 Citation (Scopus)

Effects of hydrogen and prestrain on tensile properties of low-carbon steel used in hydrogen pipelines

Nishiguchi, H., Fukushima, Y. & Matsuoka, S., Dec 1 2009, Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials. p. 365-372 8 p. (Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

low carbon steels
tensile properties
Low carbon steel
Tensile properties
Pipelines
1 Citation (Scopus)

Effects of hydrogen environment on fatigue characteristics of 18Cr-8Ni stainless steel

Kawamoto, K., Aoki, Y., Oda, Y., Yoshimura, T., Noguchi, H. & Higashida, K., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 283-286 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
stainless steels
Hydrogen
Stainless steel
Gases
1 Citation (Scopus)

Effects of internal hydrogen on fatigue strength of commercially pure titanium

Nishikawa, H., Oda, Y. & Noguchi, H., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. p. 1289-1296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium
Hydrogen
Fatigue of materials
Crack initiation
Fatigue strength

Engineering management framework to achieve a safety of service of an organization on the basis of acceptance by a society

Otsuka, Y. & Noguchi, H., 2007, WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc.. Vol. 4. p. 275-280 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Managers
Specifications

Evaluation of fatigue strength of plain and notched specimens of short carbon-fiber reinforced polyetheretherketone in comparison with polyetheretherketone

Nisitani, H., Kim, Y. H. & Noguchi, H., Jan 1 1992, Proc Second Int Offshore Polar Eng Conf. Publ by Int Soc of Offshore and Polar Engineerns (ISOPE), p. 55-62 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon fibers
Fatigue of materials
Mechanics
Fibers
Composite materials

Evaluation of joint defects on FSW of mg alloy using statistical method

Kinoshita, T., Hayashi, K., Hamada, S., Shigematsu, I. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction stir welding
Statistical methods
Welding
Defects
Railroad rolling stock

Excellent resistance to hydrogen embrittlement of high-strength copper-based alloy

Ogawa, Y., Yamabe, J., Matsunaga, H. & Matsuoka, S., Jan 1 2017, Codes and Standards. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 1A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen embrittlement
Copper
Hydrogen
Fracture toughness
Strain rate

Fatigue characteristics of aluminum cast alloy AC2B-T6 with cast skin

Ohama, S., Yoshimura, T. & Noguchi, H., Dec 1 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 55-63 9 p. (Advances in Damage Mechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Skin
Fatigue of materials
Aluminum
Microstructure
Vickers hardness

Fatigue crack propagation characteristics of alumina ceramics

Noguchi, H. & Mori, K., Jan 1 1995, 5th International Offshore and Polar Engineering Conference, ISOPE 1995. International Society of Offshore and Polar Engineers, p. 243-247 5 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 1995-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Stress intensity factors
Alumina
Cracks
Crack tips
5 Citations (Scopus)

Fatigue-life and leak-before-break assessments of CR-MO steel pressure vessels with high-pressure gaseous hydrogen

Yamabe, J., Itoga, H., Awane, T., Matsunaga, H., Hamada, S. & Matsuoka, S., Jan 1 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Fatigue crack propagation
Hydrogen
Pressure vessels
Steel
1 Citation (Scopus)

Fatigue life properties and anomalous macroscopic fatigue fracture surfaces of low carbon steel JIS-SM490B in high-pressure hydrogen gas environment

Ogawa, Y., Matsunaga, H., Yoshikawa, M., Yamabe, J. & Matsuoka, S., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low carbon steel
Fatigue of materials
Hydrogen
Gases
Air
1 Citation (Scopus)

Fatigue life properties of circumferentially-notched, type 304 austenitic stainless steel in hydrogen gas

Nagaishi, N., Matsunaga, H., Yoshikawa, M., Yamabe, J., Okazaki, S. & Matsuoka, S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Fatigue of materials
Hydrogen
Gases
High strength steel

Fracture and deformation behavior in slow-strain-rate tensile testing of Cu-Ni alloy with internal hydrogen

Wada, K., Yamabe, J., Ogawa, Y., Takakuwa, O., Iijima, T. & Matsunaga, H., Jan 1 2019, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tensile testing
Strain rate
Hydrogen
Temperature
Ductile fracture
1 Citation (Scopus)

Giga-cycle property of a new age-hardened aluminium alloy containing excess solute magnesium

Takahashi, Y., Yoshitake, H., Shikama, T., Noguchi, H. & Takuma, M., Jan 1 2014, Advances in Fracture and Damage Mechanics XII. p. 293-296 4 p. (Key Engineering Materials; vol. 577-578).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnesium
Aluminum alloys
Cracks
Fatigue of materials
Fractography

Growth behavior of hydrogen micro pores in Al-Zn-Mg-Cu alloys during high temperature exposure

Su, H., Toda, H., Uesugi, K., Takeuchi, A. & Suzuki, Y., Jan 1 2015, Materials Science and Technology Conference and Exhibition 2015, MS and T 2015. Association for Iron and Steel Technology, AISTECH, Vol. 2. p. 1589-1593 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synchrotron radiation
Superalloys
Hydrogen

High accuracy analysis method for 3D nanoscale deformation / fracture characteristics inside a material

Nakazawa, M., Kobayashi, M., Toda, H. & Aoki, Y., Jan 1 2010, Proceedings of SICE Annual Conference 2010, SICE 2010 - Final Program and Papers. Society of Instrument and Control Engineers (SICE), p. 577-584 8 p. 5602327. (Proceedings of the SICE Annual Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Hydrogen-assisted cracking of Cr-Mo steel in slow strain rate tensile test with high-pressure gaseous hydrogen

Matsunaga, H., Yoshikawa, M., Kondo, R., Itoga, H., Yamabe, J. & Matsuoka, S., Jan 1 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strain rate
Hydrogen
Steel
Gases
Tensile strength

Hydrogen-assisted degradation of high-strength stainless steel with a newly developed aluminum-based coating in high-pressure hydrogen gas environment

Yamabe, J., Takakuwa, O., Awane, T. & Matsuoka, S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
Stainless steel
Aluminum
Degradation
Coatings

Hydrogen-assisted fatigue crack propagation in a commercially pure BCC iron

Birenis, D., Ogawa, Y., Matsunaga, H., Takakuwa, O., Prytz, Ø., Yamabe, J. & Thøgersen, A., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Iron
Hydrogen
Plastic deformation
Cracks

Hydrogen embrittlement of binary high Mn austenitic steels

Koyama, M., Sawaguchi, T. & Tsuzaki, K., Jan 1 2017, ICF 2017 - 14th International Conference on Fracture. Gdoutos, E. E. (ed.). International Conference on Fracture, p. 75-76 2 p. (ICF 2017 - 14th International Conference on Fracture; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen embrittlement
Austenitic steel
Martensite
Binary alloys
Austenite

Hydrogen exposure effect on tensile strength of high strength steel sharp notched specimen

Suzuki, Y., Itoga, H., Hamada, S. & Noguchi, H., Dec 1 2009, 12th International Conference on Fracture 2009, ICF-12. p. 3556-3563 8 p. (12th International Conference on Fracture 2009, ICF-12; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
tensile strength
Tensile strength
steel
hydrogen
1 Citation (Scopus)

Hydrogen gas effects on the fatigue crack growth behavior of Cr-Mo Steel CT specimen in extremely low rate range

Tazoe, K., Oda, Y. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Hydrogen
Steel
Gases
Helium

Hydrogen-induced ductility loss in cast irons

Usuda, T., Matsuno, K., Matsunaga, H., Yanase, K. & Endo, M., Apr 10 2013, Advanced Materials Science and Technology. p. 260-263 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

ductility
Cast iron
Graphite
Ductility
casts

Hydrogen-induced ductility loss of austenitic stainless steels for slow strain rate tensile testing in high-pressure hydrogen gas

Matsuoka, S., Yamabe, J. & Matsunaga, H., Jan 1 2017, Materials Structure and Micromechanics of Fracture VIII. Sandera, P. (ed.). Trans Tech Publications Ltd, p. 259-264 6 p. (Solid State Phenomena; vol. 258 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

austenitic stainless steels
Tensile testing
Austenitic stainless steel
ductility
strain rate

Influence of hydrogen on tensile and fatigue life properties of 304/308 austenitic stainless steel butt welded joints

Okazaki, S., Matsunaga, H., Nakamura, M., Matsuoka, S. & Hamada, S., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Austenitic stainless steel
Welds
Fatigue of materials
Hydrogen
Martensitic transformations