Research Output

Filter
Conference contribution
Conference contribution

4D characterization of the stress corrosion cracking behavior in Al-10Mg aluminium alloy via synchrotron X-ray tomography

Fu, D., Toda, H., Su, H., Hirayama, K., Uesugi, K. & Takeuchi, A., Jan 1 2019, Proceedings of the 29th International Ocean and Polar Engineering Conference, ISOPE 2019. Chung, J. S., Akselsen, O. M., Jin, H., Kawai, H., Lee, Y., Matskevitch, D., Ho Van, S., Wan, D., Wang, A. M. & Yamaguchi, S. (eds.). International Society of Offshore and Polar Engineers, p. 4199-4203 5 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A case study of a cooling pipe for a pre-cooler used in a 70-MPa hydrogen station

Okazaki, S., Hamada, S., Itoga, H., Matsunaga, H., Nakamura, M. & Matsuoka, S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of small fatigue crack in Al-Mg-Si aluminum alloy

Shikama, T., Yoshihara, S., Takahashi, Y. & Noguchi, H., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 313-318 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Applicability of a FIB-notch as a small initial crack for fatigue limit evaluation

Sakamoto, J., Takahashi, Y. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of Diffraction-Amalgamated Grain Boundary Tracking (DAGT) to fatigue crack propagation behavior in high strength aluminum alloy

Li, H., Toda, H., Uesugi, K., Takeuchi, A., Suzuki, Y. & Kobayashi, M., Jan 1 2014, 3DMS 2014 - Proceedings of the 2nd International Congress on 3D Materials Science. Pollock, T., Poulsen, H. F., Rollett, A., Uchic, M., Rollett, A., Bernard, D., Rollett, A., Buffiere, J-Y., Rollett, A. & Pollock, T. (eds.). John Wiley and Sons Inc., p. 91-96 6 p. (3DMS 2014 - Proceedings of the 2nd International Congress on 3D Materials Science).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Assessment of deformation behavior of polycrystalline aluminum using diffraction-amalgamated grain-boundary tracking (DAGT) technique

Toda, H., Kamiko, T., Uesugi, K., Takeuchi, A., Suzuki, Y. & Kobayashi, M., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 57-62 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A study on evaluation scheme of effectiveness of incident-reporting system with a quantitative index of enthusiasm for reporting

Otsuka, Y. & Noguchi, H., Dec 1 2006, Proceedings of the European Safety and Reliability Conference 2006, ESREL 2006 - Safety and Reliability for Managing Risk. p. 37-44 8 p. (Proceedings of the European Safety and Reliability Conference 2006, ESREL 2006 - Safety and Reliability for Managing Risk; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Change of crack initiation and propagation modes in hydrogenrelated failure of a precipitation-strengthened NI-based superalloy 718 under internal and external hydrogen conditions

Ogawa, Y., Takakuwa, O., Okazaki, S., Matsuoka, S. & Matsunaga, H., Jan 1 2019, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damage behavior of micro segregation in Al-Si alloy by use of phase contrast imaging

Yamada, R., Toda, H., Besel, Y., Uesugi, K. & Akihisa, T., Jan 1 2016, 72nd World Foundry Congress, WFC 2016. The WFO (The World Foundry Organization Ltd), p. 379-380 2 p. (72nd World Foundry Congress, WFC 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Determination of effective stress intensity factor range of mode ii fatigue crack propagation using improved experimental method

Liu, M. & Hamada, S., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Determination of α / γ phase boundaries in the Fe-Cr-Ni-Mn quaternary system with a diffusion-multiple method

Shuro, I., Kobayashi, S., Nakamura, T. & Tsuzaki, K., Jan 1 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 577-582 6 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ductile to brittle transition in magnesium alloy with a crack

Ishina, T., Hamada, S. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of friction stir welding condition on fatigue limit of welded non-combustible Mg alloy

Hayashi, K., Hamada, S., Shigematsu, I., Sakamoto, M. & Noguchi, H., Jan 1 2012, Advances in Fracture and Damage Mechanics X. p. 311-314 4 p. (Key Engineering Materials; vol. 488-489).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of gaseous hydrogen on cyclic slip behavior around a stage i fatigue crack tip in an iron alloy

Takahashi, Y., Sakamoto, J., Tanaka, M., Higashida, K. & Noguchi, H., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of hydrogen gas on the growth of small fatigue crack in JIS-SCM435

Itoga, H., Matsunaga, H. & Matsuoka, S., Jan 1 2014, 11th International Fatigue Congress. Trans Tech Publications, p. 942-947 6 p. (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of hydrogen on microscopic deformation process near stage II fatigue crack tip

Takahashi, Y., Tanaka, M., Higashida, K. & Noguchi, H., Dec 1 2009, Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials. p. 203-210 8 p. (Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of micro-voids on crack initiation and propagation in bending deformation of Al-Mg-Si alloy sheet

Yamamoto, Y., Asano, M., Yoshida, H., Kobayashi, M. & Toda, H., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 325-330 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Effect of occasional shear loading on fatigue crack growthin 7075 aluminum alloy

Makizaki, M., Matsunaga, H., Yanase, K. & Endo, M., Apr 10 2013, Advanced Materials Science and Technology. p. 264-267 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of orientation of small defects on fatigue limit of steels

Lorenzino, P., Okazaki, S., Matsunaga, H. & Murakami, Y., Jan 1 2014, FDMD II - JIP 2014 - Fatigue Design and Material Defects. EDP Sciences, 07001. (MATEC Web of Conferences; vol. 12).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of prestrain on fatigue crack growth of age-hardened Al 6061-T6

Ikematsu, K., Mishima, T., Kang, M., Aono, Y. & Noguchi, H., Jan 1 2009, Fatigue and Fracture Mechanics: 36th Volume. American Society for Testing and Materials, p. 561-573 13 p. (ASTM Special Technical Publication; vol. 1508 STP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Effect of test frequency on hydrogen-enhanced fatigue crack growth in type 304 stainless steel and ductile cast iron

Matsunaga, H., Nakashima, T., Yamada, K., Matsuo, T., Yamabe, J. & Matsuoka, S., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Effects of external and internal hydrogen on tensile properties of austenitic stainless steels containing additive elements

Itoga, H., Matsunaga, H., Yamabe, J. & Matsuoka, S., Jan 1 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effects of gaseous hydrogen on fatigue crack growth behavior of low carbon steel

Lee, D., Nishikawa, H. A., Oda, Y. & Noguchi, H., Jun 14 2010, Proceedings of the ASME Pressure Vessels and Piping Conference 2009. p. 499-507 9 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of hydrogen and prestrain on tensile properties of low-carbon steel used in hydrogen pipelines

Nishiguchi, H., Fukushima, Y. & Matsuoka, S., Dec 1 2009, Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials. p. 365-372 8 p. (Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effects of hydrogen environment on fatigue characteristics of 18Cr-8Ni stainless steel

Kawamoto, K., Aoki, Y., Oda, Y., Yoshimura, T., Noguchi, H. & Higashida, K., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 283-286 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effects of internal hydrogen on fatigue strength of commercially pure titanium

Nishikawa, H., Oda, Y. & Noguchi, H., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. p. 1289-1296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Engineering management framework to achieve a safety of service of an organization on the basis of acceptance by a society

Otsuka, Y. & Noguchi, H., 2007, WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc.. Vol. 4. p. 275-280 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of fatigue strength of plain and notched specimens of short carbon-fiber reinforced polyetheretherketone in comparison with polyetheretherketone

Nisitani, H., Kim, Y. H. & Noguchi, H., Jan 1 1992, Proc Second Int Offshore Polar Eng Conf. Publ by Int Soc of Offshore and Polar Engineerns (ISOPE), p. 55-62 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of joint defects on FSW of mg alloy using statistical method

Kinoshita, T., Hayashi, K., Hamada, S., Shigematsu, I. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Excellent resistance to hydrogen embrittlement of high-strength copper-based alloy

Ogawa, Y., Yamabe, J., Matsunaga, H. & Matsuoka, S., Jan 1 2017, Codes and Standards. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 1A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue characteristics of aluminum cast alloy AC2B-T6 with cast skin

Ohama, S., Yoshimura, T. & Noguchi, H., Dec 1 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 55-63 9 p. (Advances in Damage Mechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation characteristics of alumina ceramics

Noguchi, H. & Mori, K., Jan 1 1995, 5th International Offshore and Polar Engineering Conference, ISOPE 1995. International Society of Offshore and Polar Engineers, p. 243-247 5 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 1995-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue-life and leak-before-break assessments of CR-MO steel pressure vessels with high-pressure gaseous hydrogen

Yamabe, J., Itoga, H., Awane, T., Matsunaga, H., Hamada, S. & Matsuoka, S., Jan 1 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Fatigue life properties and anomalous macroscopic fatigue fracture surfaces of low carbon steel JIS-SM490B in high-pressure hydrogen gas environment

Ogawa, Y., Matsunaga, H., Yoshikawa, M., Yamabe, J. & Matsuoka, S., Jan 1 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Fatigue life properties of circumferentially-notched, type 304 austenitic stainless steel in hydrogen gas

Nagaishi, N., Matsunaga, H., Yoshikawa, M., Yamabe, J., Okazaki, S. & Matsuoka, S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Fracture and deformation behavior in slow-strain-rate tensile testing of Cu-Ni alloy with internal hydrogen

Wada, K., Yamabe, J., Ogawa, Y., Takakuwa, O., Iijima, T. & Matsunaga, H., Jan 1 2019, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Giga-cycle property of a new age-hardened aluminium alloy containing excess solute magnesium

Takahashi, Y., Yoshitake, H., Shikama, T., Noguchi, H. & Takuma, M., Jan 1 2014, Advances in Fracture and Damage Mechanics XII. p. 293-296 4 p. (Key Engineering Materials; vol. 577-578).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Growth behavior of hydrogen micro pores in Al-Zn-Mg-Cu alloys during high temperature exposure

Su, H., Toda, H., Uesugi, K., Takeuchi, A. & Suzuki, Y., Jan 1 2015, Materials Science and Technology Conference and Exhibition 2015, MS and T 2015. Association for Iron and Steel Technology, AISTECH, Vol. 2. p. 1589-1593 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen-assisted cracking of Cr-Mo steel in slow strain rate tensile test with high-pressure gaseous hydrogen

Matsunaga, H., Yoshikawa, M., Kondo, R., Itoga, H., Yamabe, J. & Matsuoka, S., Jan 1 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Hydrogen-assisted degradation of high-strength stainless steel with a newly developed aluminum-based coating in high-pressure hydrogen gas environment

Yamabe, J., Takakuwa, O., Awane, T. & Matsuoka, S., Jan 1 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Hydrogen-assisted fatigue crack propagation in a commercially pure BCC iron

Birenis, D., Ogawa, Y., Matsunaga, H., Takakuwa, O., Prytz, Ø., Yamabe, J. & Thøgersen, A., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen embrittlement of binary high Mn austenitic steels

Koyama, M., Sawaguchi, T. & Tsuzaki, K., Jan 1 2017, ICF 2017 - 14th International Conference on Fracture. Gdoutos, E. E. (ed.). International Conference on Fracture, p. 75-76 2 p. (ICF 2017 - 14th International Conference on Fracture; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen exposure effect on tensile strength of high strength steel sharp notched specimen

Suzuki, Y., Itoga, H., Hamada, S. & Noguchi, H., Dec 1 2009, 12th International Conference on Fracture 2009, ICF-12. p. 3556-3563 8 p. (12th International Conference on Fracture 2009, ICF-12; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen gas effects on the fatigue crack growth behavior of Cr-Mo Steel CT specimen in extremely low rate range

Tazoe, K., Oda, Y. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Hydrogen-induced ductility loss in cast irons

Usuda, T., Matsuno, K., Matsunaga, H., Yanase, K. & Endo, M., Apr 10 2013, Advanced Materials Science and Technology. p. 260-263 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen-induced ductility loss of austenitic stainless steels for slow strain rate tensile testing in high-pressure hydrogen gas

Matsuoka, S., Yamabe, J. & Matsunaga, H., Jan 1 2017, Materials Structure and Micromechanics of Fracture VIII. Sandera, P. (ed.). Trans Tech Publications Ltd, p. 259-264 6 p. (Solid State Phenomena; vol. 258 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of hydrogen on tensile and fatigue life properties of 304/308 austenitic stainless steel butt welded joints

Okazaki, S., Matsunaga, H., Nakamura, M., Matsuoka, S. & Hamada, S., Jan 1 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of inclusions on fatigue characteristics of non-combustible Mg alloy

Kitahara, Y., Shimazaki, H., Yabu, T., Noguchi, H., Sakamoto, M. & Ueno, H., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 359-362 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Influence of welding parameters on fatigue strength of spot-welded joint considering nugget size

Chaya, T., Yoshimura, T. & Noguchi, H., 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 321-331 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Intergrated evaluation method for fatigue limit of notched steel with ΔKth value

Matsueda, T. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution