If you made any changes in Pure these will be visible here soon.

Research Output 1995 2019

  • 311 Citations
  • 9 h-Index
  • 16 Article
  • 12 Conference contribution
  • 4 Paper
Article
9 Citations (Scopus)

A new method to estimate ultimate strength of stiffened panels under longitudinal thrust based on analytical formulas

Ozdemir, M., Ergin, A., Yanagihara, D., Tanaka, S. & Yao, T., May 1 2018, In : Marine Structures. 59, p. 510-535 26 p.

Research output: Contribution to journalArticle

Buckling
Finite element method
Residual stresses
Welding
1 Citation (Scopus)
pitch (inclination)
blades
rubber
wind turbines
Rubber

Axial compressive residual ultimate strength of circular tube after lateral collision

Li, R., Yanagihara, D. & Yoshikawa, T., Jan 1 2019, In : International Journal of Naval Architecture and Ocean Engineering. 11, 1, p. 396-408 13 p.

Research output: Contribution to journalArticle

Axial compression
Load limits
Compressive stress
Application programming interfaces (API)
Plastic deformation

Buckling/collapse analysis of welded panel structures

Yanagihara, D., Sep 1 2011, In : Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 80, 6, p. 6-9 4 p.

Research output: Contribution to journalArticle

Buckling
13 Citations (Scopus)

Buckling/plastic collapse behaviour and strength of stiffened plates under thrust

Yao, T., Fujikubo, M. & Yanagihara, D., Dec 1 1997, In : International Journal of Offshore and Polar Engineering. 7, 4, p. 285-292 8 p.

Research output: Contribution to journalArticle

Buckling
Plastics
Rigidity
Geometry
17 Citations (Scopus)

Buckling analysis of stiffened plate structures by an improved meshfree flat shell formulation

Sadamoto, S., Tanaka, S., Taniguchi, K., Ozdemir, M., Bui, T. Q., Murakami, C. & Yanagihara, D., Aug 1 2017, In : Thin-Walled Structures. 117, p. 303-313 11 p.

Research output: Contribution to journalArticle

Buckling
Stiffness matrix
Flanges
Drilling
Boundary conditions

Buckling and collapse analysis of a cracked panel under a sequence of tensile to compressive load employing a shell-solid mixed finite element modeling

Tanaka, S., Sujiatanti, S. H., Setoyama, Y., Yu, J., Yanagihara, D. & Pei, Z., Oct 1 2019, In : Engineering Failure Analysis. 104, p. 987-1001 15 p.

Research output: Contribution to journalArticle

Buckling
Cracks
Steel
Crack tips
Aspect ratio
1 Citation (Scopus)

Collapse behaviour of stiffened plating under thrust. (1st report)

Yao, T., Yanagihara, D., Fujikubo, M. & Ohno, Y., Dec 1 1995, In : Nihon Zosen Gakkai Ronbunshu/Journal of the Society of Naval Architects of Japan. 178, p. 451-462 12 p.

Research output: Contribution to journalArticle

Plating
Buckling
Load limits
Rigidity
Plastics
wind turbines
pitch (inclination)
rubber
Wind turbines
Rubber
50 Citations (Scopus)

Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure Part 1: Continuous plate

Fujikubo, M., Yao, T., Khedmati, M. R., Harada, M. & Yanagihara, D., Jul 1 2005, In : Marine Structures. 18, 5-6, p. 383-410 28 p.

Research output: Contribution to journalArticle

Plating
Finite element method
Buckling
Ships
79 Citations (Scopus)

Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure Part 2: Continuous stiffened panel

Fujikubo, M., Harada, M., Yao, T., Khedmati, M. R. & Yanagihara, D., Jul 1 2005, In : Marine Structures. 18, 5-6, p. 411-427 17 p.

Research output: Contribution to journalArticle

Plating
Failure modes
Buckling
Finite element method
37 Citations (Scopus)

Evaluation of ultimate strength of stiffened panels under longitudinal thrust

Tanaka, S., Yanagihara, D., Yasuoka, A., Harada, M., Okazawa, S., Fujikubo, M. & Yao, T., Apr 1 2014, In : Marine Structures. 36, p. 21-50 30 p.

Research output: Contribution to journalArticle

Buckling
Finite element method
Aspect ratio
Ships
Plastics
1 Citation (Scopus)

Finite element modeling and ultimate strength evaluation for cracked plates

Setoyama, Y., Tanaka, S., Yanagihara, D. & Murakami, C., Oct 17 2017, In : Transactions of the Japan Society for Computational Engineering and Science. 2017, 20170014.

Research output: Contribution to journalArticle

Buckling
Cracks
Crack closure
Axial compression
50 Citations (Scopus)

Influence of boundary conditions on the collapse behaviour of stiffened panels under combined loads

Xu, M. C., Yanagihara, D., Fujikubo, M. & Guedes Soares, C., Dec 1 2013, In : Marine Structures. 34, p. 205-225 21 p.

Research output: Contribution to journalArticle

Boundary conditions
Finite element method
Geometry
Direction compound
Uncertainty
4 Citations (Scopus)

ISUM approach for collapse analysis of double-bottom structures in ships

Fujikubo, M., Yanagihara, D., Setoyama, Y. & Olaru, D. V., Jan 1 2003, In : International Journal of Offshore and Polar Engineering. 13, 3, p. 224-231 8 p.

Research output: Contribution to journalArticle

Ships
Plating
Systems analysis
Finite element method
9 Citations (Scopus)

Meshfree flat-shell formulation for evaluating linear buckling loads and mode shapes of structural plates

Yoshida, K., Sadamoto, S., Setoyama, Y., Tanaka, S., Bui, T. Q., Murakami, C. & Yanagihara, D., Sep 1 2017, In : Journal of Marine Science and Technology (Japan). 22, 3, p. 501-512 12 p.

Research output: Contribution to journalArticle

buckling
Buckling
shell
Galerkin method
Value engineering
Conference contribution
5 Citations (Scopus)

A New Type VLFS Using Submerged Plates: Sub-Plate VLFS - Part-3 Structural Response and Strength

Fujikubo, M., Yanagihara, D., Kitamura, M., Yamamoto, M., Iwashita, H., Takaki, M., Kanda, M., Ando, K. & Imai, Y., Dec 1 2001, Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE. Maeda, H. (ed.). Vol. 5. p. 93-100 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Breakwaters
Water
Finite element method

A simple design formula to estimate the ultimate strength of stiffened panels under bi-axial compression mainly in transverse direction

Komoriyama, Y. & Yanagihara, D., Jan 1 2018, Structures, Safety, and Reliability. American Society of Mechanical Engineers (ASME), (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial compression
Buckling
Compaction
Availability
Finite element method
1 Citation (Scopus)

Bending and compressive strength of stiffened panels with crack damage in longitudinal stiffeners

Yanagihara, D., Jan 1 2014, Proceedings of the 24th International Ocean and Polar Engineering Conference, ISOPE Busan. International Society of Offshore and Polar Engineers, p. 671-678 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bending strength
Compressive strength
Cracks
Buckling
Finite element method

Buckling/fracture behavior of GFRP stiffened panel with top-hat stiffener under compression and prediction of initiation of delamination

Yanagihara, D., Fukuwa, K. & Fujikubo, M., Sep 16 2013, Proceedings of the 23rd International Offshore and Polar Engineering Conference, ISOPE 2013. p. 678-685 8 p. (Proceedings of the International Offshore and Polar Engineering Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Delamination
Buckling
Bending tests
Bending moments
Compressive stress
1 Citation (Scopus)

Collapse behaviour and ultimate strength of stiffened panels with arbitrary number of stiffeners subjected to longitudinal thrust

Yasuoka, A., Tanaka, S., Yanagihara, D., Okazawa, S. & Yao, T., Sep 17 2012, Proceedings of the 22nd (2012) International Offshore and Polar Engineering Conference. p. 807-814 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aspect ratio
Finite element method

Collapse Tests on 1/10-Scale Hull Girder Model of Chip Carrier in Sagging

Yao, T., Fujikubo, M., Yanagihara, D. & Fujii, I., Dec 1 2003, Proceedings of the International Offshore and Polar Engineering Conference. p. 2626-2633 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plating
Buckling
Bending moments
Steel
4 Citations (Scopus)

Elastic buckling and elasto-plastic collapse behaviors with torsion of a longitudinal stiffener under axial compression

Yanagihara, D. & Fujikubo, M., Mar 6 2013, Analysis and Design of Marine Structures - Proceedings of the 4th International Conference on Marine Structures, MARSTRUCT 2013. p. 319-328 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial compression
Torsional stress
Buckling
Plastics
Finite element method

Elastic buckling and ultimate strength of steel sandwich panels subjected to longitudinal or transverse compression

Yanagihara, D., Jan 1 2016, Proceedings of the 26th International Ocean and Polar Engineering Conference, ISOPE 2016. Wang, A. M., Chung, J. S., Kokkinis, T. & Muskulus, M. (eds.). International Society of Offshore and Polar Engineers, p. 496-503 8 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 2016-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Buckling
Steel
Finite element method
Plastics
10 Citations (Scopus)

ISUM Approach for Collapse Analysis of Double-Bottom Structures in Ships

Fujikubo, M., Olaru, V. D., Yanagihara, D. & Setoyama, Y., Dec 1 2002, Proceedings of the 12th (2002) International Offshore and Polar Engineering Conference. Chung, J. S., Sayed, M., Kashiwagi, M., Setoguchi, T. & Hong, S. W. (eds.). Vol. 12. p. 644-651 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ships
Plating
Systems analysis
Finite element method
7 Citations (Scopus)

Post-ultimate strength behaviour of long rectangular plate subjected to uni-axial thrust

Yao, T., Fujikubo, M., Yanagihara, D. & Murase, T., Jan 1 2001, Proceedings of the International Offshore and Polar Engineering Conference. Vol. 4. p. 390-397 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Buckling
Load limits
Unloading
Roofs
Plastic deformation
6 Citations (Scopus)

Residual strength evaluation of corroded steel members in marine environments

Yamane, M., Tanaka, K., Matsuda, B., Fujikubo, M., Yanagihara, D. & Iwao, N., Dec 1 2006, Proceedings of The Sixteenth 2006 International Offshore and Polar Engineering Conference, ISOPE 2006. p. 43-50 8 p. (Proceedings of the International Offshore and Polar Engineering Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion
Steel
Paint
Coatings
Compaction

Residual ultimate strength of simply supported corroded plates with initial geometrical imperfections under uniaxial compression

Li, R., Yanagihara, D. & Yoshikawa, T., Jan 1 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 332-339 8 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ocean structures
Compaction
Corrosion
Defects
Steel
Paper
1 Citation (Scopus)

Buckling/Fracture Behaviour of GFRP Laminated plates with Initial Delamination

Yanagihara, D., Fujikubo, M. & Teraue, D., Dec 1 2002, p. 162-169. 8 p.

Research output: Contribution to conferencePaper

Delamination
Buckling
Finite element method
Polyester resins
Energy release rate

Buckling/Plastic Collapse Behaviour and Estimation of Ultimate Strength of Aluminium Stiffened Plate

Setta, K., Yanagihara, D. & Fujikubo, M., Dec 1 2002, p. 636-643. 8 p.

Research output: Contribution to conferencePaper

Buckling
Plastics
Aluminum
Heat affected zone
Strain hardening
2 Citations (Scopus)

Buckling/plastic collapse behaviour and strength of stiffened plates under thrust

Yao, T., Fujikubo, M. & Yanagihara, D., Jan 1 1997, p. 353-360. 8 p.

Research output: Contribution to conferencePaper

Buckling
Plastics
Rigidity
Geometry
Ions
3 Citations (Scopus)

Structural Response and Strength of A New Type VLFS Using Submerged Plates

Fujikubo, M., Takaki, M., Xiao, T. Y., Yanagihara, D., Kanda, M. & Imai, Y., Dec 1 2002, p. 414-421. 8 p.

Research output: Contribution to conferencePaper

Floating breakwaters
Pontoons
Fluids