If you made any changes in Pure these will be visible here soon.

Research Output 1983 2019

Filter
Conference contribution
2017
1 Citation (Scopus)

Investigation on Mode I propagation behavior of fatigue crack in precipitation-hardened aluminum alloy with different Mg content

Anis, S. F., Koyama, M. & Noguchi, H., Jan 1 2017, Engineering and Innovative Materials V. Trans Tech Publications Ltd, p. 143-147 5 p. (Materials Science Forum; vol. 889 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

crack propagation
Fatigue crack propagation
aluminum alloys
Aluminum alloys
Crack propagation
2014
1 Citation (Scopus)

Analysis of small fatigue crack in Al-Mg-Si aluminum alloy

Shikama, T., Yoshihara, S., Takahashi, Y. & Noguchi, H., Jan 1 2014, Aluminium Alloys, ICAA 2014. Trans Tech Publications Ltd, p. 313-318 6 p. (Materials Science Forum; vol. 794-796).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

aluminum alloys
Aluminum alloys
cracks
S-N diagrams
Fatigue of materials
1 Citation (Scopus)

Giga-cycle property of a new age-hardened aluminium alloy containing excess solute magnesium

Takahashi, Y., Yoshitake, H., Shikama, T., Noguchi, H. & Takuma, M., Jan 1 2014, Advances in Fracture and Damage Mechanics XII. p. 293-296 4 p. (Key Engineering Materials; vol. 577-578).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnesium
Aluminum alloys
Cracks
Fatigue of materials
Fractography
2012

Applicability of a FIB-notch as a small initial crack for fatigue limit evaluation

Sakamoto, J., Takahashi, Y. & Noguchi, H., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Focused ion beams
Fatigue of materials
Cracks
Defects
Axial loads

Ductile to brittle transition in magnesium alloy with a crack

Ishina, T., Hamada, S. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnesium alloys
Cracks
Temperature
Automobile engines
Oxides
1 Citation (Scopus)

Effect of friction stir welding condition on fatigue limit of welded non-combustible Mg alloy

Hayashi, K., Hamada, S., Shigematsu, I., Sakamoto, M. & Noguchi, H., 2012, Advances in Fracture and Damage Mechanics X. Vol. 488-489. p. 311-314 4 p. (Key Engineering Materials; vol. 488-489).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction stir welding
Welding
Fatigue of materials
Defects
Hardness

Evaluation of joint defects on FSW of mg alloy using statistical method

Kinoshita, T., Hayashi, K., Hamada, S., Shigematsu, I. & Noguchi, H., Jan 1 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction stir welding
Statistical methods
Welding
Defects
Railroad rolling stock
1 Citation (Scopus)

Hydrogen gas effects on the fatigue crack growth behavior of Cr-Mo Steel CT specimen in extremely low rate range

Tazoe, K., Oda, Y. & Noguchi, H., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Hydrogen
Steel
Gases
Helium

Intergrated evaluation method for fatigue limit of notched steel with ΔKth value

Matsueda, T. & Noguchi, H., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Steel
Crack initiation
Carbon steel
Cracks

Loading frequency effects on the fatigue crack growth rate and fracture surface morphology of low carbon steel in case of long-term use in hydrogen gas

Nishimoto, A., Oda, Y. & Noguchi, H., Jan 1 2012, Advances in Fracture and Damage Mechanics X. p. 323-326 4 p. (Key Engineering Materials; vol. 488-489).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low carbon steel
Fatigue crack propagation
Surface morphology
Hydrogen
Gases

Micro-analyses of small cracks in 6061-T6 aluminium alloy subjected to high-cycle fatigue

Takahashi, Y., Shikama, T. & Noguchi, H., Dec 6 2012, Advances in Fracture and Damage Mechanics XI. p. 213-216 4 p. (Key Engineering Materials; vol. 525-526).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum alloys
Fatigue of materials
Cracks
Focused ion beams
Band structure

Mode ii delamination fatigue crack growth characteristics of gfrp laminates with waste GFRP milled chips interleaf

Yokogawa, H., Aono, Y. & Noguchi, H., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Conference on Composite Materials, ECCM

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Delamination
Laminates
Fatigue of materials
Cracks

Relation between fatigue crack initiation and structure in pearlitic steel

Fujisawa, T., Sasaki, D., Hamada, S. & Noguchi, H., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crack initiation
Crystal structure
Steel
Fatigue of materials
Pearlite

Small fatigue crack growth behavior from artificial notch with focused ion beam in annealed 0.45% carbon steel

Sakamoto, J., Takahashi, Y. & Noguchi, H., Jan 1 2012, Advances in Fracture and Damage Mechanics X. p. 319-322 4 p. (Key Engineering Materials; vol. 488-489).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Focused ion beams
Fatigue crack propagation
Carbon steel
Cracks
Fatigue of materials

The effect of prestrain on fatigue property of precipitation strengthening stainless steel SUH660

Wu, H., Hamada, S. & Noguchi, H., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless steel
Fatigue of materials
Crack propagation
Crack initiation
Precipitates
2010

Consideration on hydrogen condition in fatigue crack growth test in hydrogen gas environment: Focusing on concentrated hydrogen zone near crack tip

Nishimoto, A., Nishikawa, H., Oda, Y. & Noguchi, H., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Crack tips
Hydrogen
Gases
Plastics

Effect of gaseous hydrogen on cyclic slip behavior around a stage i fatigue crack tip in an iron alloy

Takahashi, Y., Sakamoto, J., Tanaka, M., Higashida, K. & Noguchi, H., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iron alloys
Crack tips
Helium
Hydrogen
Cracks

Effects of gaseous hydrogen on fatigue crack growth behavior of low carbon steel

Lee, D., Nishikawa, H. A., Oda, Y. & Noguchi, H., Jun 14 2010, Proceedings of the ASME Pressure Vessels and Piping Conference 2009. p. 499-507 9 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low carbon steel
Fatigue crack propagation
Hydrogen
Ductile fracture
Gases
2009

Effect of hydrogen on microscopic deformation process near stage II fatigue crack tip

Takahashi, Y., Tanaka, M., Higashida, K. & Noguchi, H., 2009, Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials. p. 203-210 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

crack tips
Crack tips
Hydrogen
slip
Cracks
2 Citations (Scopus)

Effect of prestrain on fatigue crack growth of age-hardened Al 6061-T6

Ikematsu, K., Mishima, T., Kang, M., Aono, Y. & Noguchi, H., Jan 1 2009, Fatigue and Fracture Mechanics: 36th Volume. American Society for Testing and Materials, p. 561-573 13 p. (ASTM Special Technical Publication; vol. 1508 STP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Fatigue of materials
Plastic deformation
Fatigue cracks

Hydrogen exposure effect on tensile strength of high strength steel sharp notched specimen

Suzuki, Y., Itoga, H., Hamada, S. & Noguchi, H., Dec 1 2009, 12th International Conference on Fracture 2009, ICF-12. p. 3556-3563 8 p. (12th International Conference on Fracture 2009, ICF-12; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
tensile strength
Tensile strength
steel
hydrogen
1 Citation (Scopus)

Loading-frequency effects on fatigue crack growth behavior of a low carbon steel in hydrogen gas environment

Nishikawa, H., Oda, Y. & Noguchi, H., 2009, 12th International Conference on Fracture 2009, ICF-12. Vol. 6. p. 4196-4205 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low carbon steel
Fatigue crack propagation
fatigue
Ductile fracture
Strain rate

Microscopic study on the effect of hydrogen on deformation process near stage II fatigue crack tip

Takahashi, Y., Tanaka, M., Higashida, K. & Noguchi, H., 2009, 12th International Conference on Fracture 2009, ICF-12. Vol. 4. p. 2793-2800 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

fatigue
Crack tips
crack
hydrogen
Cracks

Microscopic study on the effect of hydrogen on fatigue crack growth process in a chromium-molybdenum steel

Takahashi, Y., Yamaguchi, K., Shigenaga, M., Tanaka, M., Higashida, K. & Noguchi, H., Dec 1 2009, 12th International Conference on Fracture 2009, ICF-12. p. 2416-2423 8 p. (12th International Conference on Fracture 2009, ICF-12; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

crack propagation
molybdenum
Fatigue crack propagation
fatigue
Molybdenum

Prediction of the fatigue limit of prestrained carbon steel under tensile mean stress

Kang, M., Irisa, K., Aono, Y. & Noguchi, H., 2009, Fatigue and Fracture Mechanics: 36th Volume. American Society for Testing and Materials, Vol. 1508 STP. p. 164-182 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon steel
Fatigue of materials
Hardness
Defects
2008
1 Citation (Scopus)

Effects of internal hydrogen on fatigue strength of commercially pure titanium

Nishikawa, H., Oda, Y. & Noguchi, H., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. p. 1289-1296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium
Hydrogen
Fatigue of materials
Crack initiation
Fatigue strength

Microscopic deformation behavior of lamellar pearlite steel

Sakoda, Y., Kashiwagi, S., Hamada, S. & Noguchi, H., Dec 1 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. p. 358-365 8 p. (17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pearlite
Fatigue of materials
Steel
Cracks
Microstructure

Proposal of estimation method for notched specimen fatigue limit of commercially pure titanium

Fujii, T., Hamada, S. & Noguchi, H., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. p. 937-944 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium
Fatigue of materials
Crack initiation
Fatigue cracks
1 Citation (Scopus)

The decrease of tensile strength for the notched specimens in the hydrogen gas

Itoga, H., Suzuki, Y. & Noguchi, H., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. p. 1304-1311 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tensile strength
Hydrogen
Gases
Crack initiation
Thermal desorption
2007

Engineering management framework to achieve a safety of service of an organization on the basis of acceptance by a society

Otsuka, Y. & Noguchi, H., 2007, WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc.. Vol. 4. p. 275-280 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Managers
Specifications
2006
1 Citation (Scopus)

A study on evaluation scheme of effectiveness of incident-reporting system with a quantitative index of enthusiasm for reporting

Otsuka, Y. & Noguchi, H., Dec 1 2006, Proceedings of the European Safety and Reliability Conference 2006, ESREL 2006 - Safety and Reliability for Managing Risk. Vol. 1. p. 37-44 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

reporting system
incident
evaluation
Managers
hospital organization
2005
1 Citation (Scopus)

Effects of hydrogen environment on fatigue characteristics of 18Cr-8Ni stainless steel

Kawamoto, K., Aoki, Y., Oda, Y., Yoshimura, T., Noguchi, H. & Higashida, K., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 283-286 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
stainless steels
Hydrogen
Stainless steel
Gases
8 Citations (Scopus)

Influence of inclusions on fatigue characteristics of non-combustible Mg alloy

Kitahara, Y., Shimazaki, H., Yabu, T., Noguchi, H., Sakamoto, M. & Ueno, H., Dec 1 2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. p. 359-362 4 p. (Materials Science Forum; vol. 482).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Ignition
Particle size analysis
Machining
2003

Fatigue characteristics of aluminum cast alloy AC2B-T6 with cast skin

Ohama, S., Yoshimura, T. & Noguchi, H., Dec 1 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 55-63 9 p. (Advances in Damage Mechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Skin
Fatigue of materials
Aluminum
Microstructure
Vickers hardness

Influence of welding parameters on fatigue strength of spot-welded joint considering nugget size

Chaya, T., Yoshimura, T. & Noguchi, H., 2003, Fatigue Damage of Materials: Experiment and Analysis. Varvani-Farahani, A., Brebbia, C. A., Varvani-Farahani, A. & Brebbia, C. A. (eds.). p. 321-331 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welding
Welds
Fatigue strength
Fatigue of materials
Heat transfer

Reliability problem prevention method for automotive components - Development of GD3 activity and DRBFM (Design Review Based on Failure Mode)-

Shimizu, H., Imagawa, T. & Noguchi, H., Dec 1 2003, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Failure modes
Systems analysis
Fault tree analysis
Innovation
1996
1 Citation (Scopus)

Model for fracture of ceramics based on the probability distribution of fracture toughness

Mori, K. & Noguchi, H., 1996, Localized Damage IV. Computational Mechanics Inc, p. 831-838 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Probability distributions
Fracture toughness
Defects
Bending tests
Alumina
1995

Fatigue crack propagation characteristics of alumina ceramics

Noguchi, H. & Mori, K., Jan 1 1995, 5th International Offshore and Polar Engineering Conference, ISOPE 1995. International Society of Offshore and Polar Engineers, p. 243-247 5 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 1995-June).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Stress intensity factors
Alumina
Cracks
Crack tips
1992

Evaluation of fatigue strength of plain and notched specimens of short carbon-fiber reinforced polyetheretherketone in comparison with polyetheretherketone

Nisitani, H., Kim, Y. H. & Noguchi, H., Jan 1 1992, Proc Second Int Offshore Polar Eng Conf. Publ by Int Soc of Offshore and Polar Engineerns (ISOPE), p. 55-62 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon fibers
Fatigue of materials
Mechanics
Fibers
Composite materials
4 Citations (Scopus)

Method of analysis for two-dimensional stationary thermoelastic problems by body force method

Nisitani, H., Saimoto, A., Noguchi, H. & Chen, D. H., 1992, American Society of Mechanical Engineers, EEP. Publ by ASME, Vol. 1. p. 437-446 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Temperature distribution
Heat transfer
Cracks
Temperature
Hot Temperature
1983
1 Citation (Scopus)

TENSION AND BENDING OF A SEMI-ELLIPTICAL SURFACE CRACK.

Isida, M. & Noguchi, H., 1983, Unknown Host Publication Title. Sih, G. C., Ryan, N. E. & Jones, R. (eds.). Martinus Nijhoff Publ, p. 189-192 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cracks
Boundary layers
Stress intensity factors
Boundary conditions