If you made any changes in Pure these will be visible here soon.

Research Output 1987 2019

Filter
Conference contribution
7 Citations (Scopus)

Clean and reliable bearing steel

Kawakami, K., Takada, S., Takasu, I. & Nakashima, K., 2005, ICS 2005 - Proceedings of the 3rd International Congress on the Science and Technology of Steelmaking. p. 209-220 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Steel
1 Citation (Scopus)

Effect of mo powder surface condition on fabrication of Mo-SiO2 functionally graded materials with slipcasting method

Umemoto, A., Hayashi, K., Hayano, K., Saito, N., Kaneko, K. & Nakashima, K., Dec 1 2007, Proceedings of the 2nd Int. Conf. Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials. p. 219-224 6 p. (Ceramic Transactions; vol. 198).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Functionally graded materials
Discharge lamps
Powders
Fabrication
Electric lamps

Effect of nano-sized particles on the mechanical properties of Y2O3

Razavi Khosroshahi, H., Liu, X., Saito, N., Nakashima, K. & Kaneko, K., Apr 10 2013, Advanced Materials Science and Technology. p. 44-47 4 p. (Materials Science Forum; vol. 750).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

mechanical properties
Mechanical properties
composite materials
Composite materials
toughness
1 Citation (Scopus)

Formation and physical property of molten calcium ferrite in iron ore sinter

Maeda, T., Nakashima, K. & Shimizu, M., Dec 1 2004, 2nd International Meeting on Ironmaking and 1st International Symposium on Iron Ore and parallel event - 5th Japan-Brazil Symposium on Dust Processing-Energy-Environment on Metallurgical Industries. Vol. 1. p. 571-577 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Iron ore sinter
Ferrite
Molten materials
Calcium
Physical properties
1 Citation (Scopus)

Generation mechanisms of non-metallic inclusions in high-cleanliness steel

Kawakami, K., Taniguchi, T. & Nakashima, K., Dec 1 2008, Proceedings ICS 2008: The 4th International Congress on the Science and Technology of Steelmaking. p. 399-402 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ladle metallurgy
Steelmaking
Steel
4 Citations (Scopus)

Grain growth of β-silicon nitride in RE-Mg-Si-O-N liquid

Saito, N., Nakata, D., Nakashima, K. & Umemoto, A., Jul 26 2006, Developments and Applications of Advanced Engineering Ceramics and Composites - Proceedings of the 6th Pacific Rim Conference on Ceramic and Glass Technology, PacRim6. p. 73-80 8 p. (Ceramic Transactions; vol. 192).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon nitride
Grain growth
Crystals
Liquids
Heat treatment

Joining of UHTC composites using metallic interlayer

Saito, N., Esposito, L., Yoneima, T., Hayashi, K. & Nakashima, K., Jan 1 2017, Joining Technologies for Composites and Dissimilar Materials - Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Backman, D., Patterson, E. & Cloud, G. L. (eds.). Springer New York LLC, p. 99-106 8 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 10).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joining
Composite materials
Surface chemistry
Temperature
Reaction products

Mo-SiO2 functionally graded materials for high intensity discharge lamp

Umemoto, A., Hayashi, K., Nakashima, K., Saito, N., Kaneko, K. & Ogi, K., Jul 24 2006, Developments and Applications of Advanced Engineering Ceramics and Composites - Proceedings of the 6th Pacific Rim Conference on Ceramic and Glass Technology, PacRim6. p. 53-58 6 p. (Ceramic Transactions; vol. 192).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Discharge lamps
Functionally graded materials
Electric lamps
Fused silica
Cooling systems
1 Citation (Scopus)

Reduction rate of chromite ore by Fe-C-Si melts

Nakasuga, T., Sun, H., Nakashima, K. & Mori, K., Dec 1 2000, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 553-558 6 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chromite
Ores
Liquids
Silicon
Slags
1 Citation (Scopus)

The oxidation rate of Pb and Ni in the copper by slag

Nakashima, K., Yamamoto, K., Shibata, E., Tahori, H. & Mori, K., Dec 1 2000, Proceedings of the Second International Conference on Processing Materials for Properties. Mishra, B., Yamauchi, C., Mishra, B. & Yamauchi, C. (eds.). p. 839-844 6 p. (Proceedings of the Second International Conference on Processing Materials for Properties).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Slags
Copper
Oxidation
Activity coefficients
Chemical analysis

Viscosity of steel-making slag containing iron oxide

Sukenaga, S., Saito, N., Nakashima, J. & Nakashima, K., Dec 1 2008, Proceedings ICS 2008: The 4th International Congress on the Science and Technology of Steelmaking. p. 562-565 4 p. (Proceedings ICS 2008: The 4th International Congress on the Science and Technology of Steelmaking).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Iron oxides
Slags
Physical properties
Viscosity

Wettability of graphite substrates against molten CaO-SiO2-Al2O3-MgO slags

Sukenaga, S., Yasutake, K., Saito, N. & Nakashima, K., Jan 1 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Association for Iron and Steel Technology, AISTECH, p. 734-738 5 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Slags
Contact angle
Wetting
Molten materials
Graphite