If you made any changes in Pure these will be visible here soon.

Research Output 1986 2019

  • 65 Citations
  • 4 h-Index
  • 27 Article
  • 11 Conference contribution
Filter
Conference contribution
2016

Hydrogen trap in fine Ca(OH)2 powder made from scallop-shell waste

Tsuchida, H., Aramaki, M., Furukimi, O. & Kato, Y., Jan 1 2016, Electrochemical Energy Summit (E2S) - Poster Session. Yoon, W-S., Liaw, B., Weber, A., Uchida, H. & Glick, M. (eds.). 54 ed. Electrochemical Society Inc., p. 31-38 8 p. (ECS Transactions; vol. 75, no. 54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Powders
Hydrogen
Nuclear magnetic resonance
Hydrated lime
Temperature
2014

Effect of number of grain on ductile fracture behavior of iron by molecular dynamics simulation

Hirashima, T., Aramaki, M., Munetoh, S. & Furukimi, O., Jan 1 2014, Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress. Lubben, T., Zoch, H-W. & Schneider, R. (eds.). Arbeitsgemeineschaft Warmebehandlung u. Werkstofftechnik, p. 477-479 3 p. (Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ductile fracture
Molecular dynamics
Iron
Computer simulation
Grain boundaries

Effect of tensile strain rate on ductile fracture energy for industrial pure iron

Nishimura, T., Aramaki, M., Munetoh, S., Ueji, R. & Furukimi, O., Jan 1 2014, Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress. Lubben, T., Zoch, H-W. & Schneider, R. (eds.). Arbeitsgemeineschaft Warmebehandlung u. Werkstofftechnik, p. 511-514 4 p. (Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fracture energy
Ductile fracture
Tensile strain
Strain rate
Iron
2 Citations (Scopus)

Improvement of anti-wear property by nitriding-accelerated cooling process

Katafuchi, H., Aramaki, M., Yamada, N., Chayapiwut, N., Kabasawa, H. & Furukimi, O., Jan 1 2014, Proceedings - European Conference on Heat Treatment and 21st IFHTSE Congress. Arbeitsgemeineschaft Warmebehandlung u. Werkstofftechnik, p. 467-470 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Nitriding
Wear of materials
Cooling
Iron
2012
1 Citation (Scopus)

Effect of microstructure on formation of ductile fracture surface in steel plate

Fukahori, T., Suzuki, S., Yamada, N., Aramaki, M. & Furukimi, O., Jan 4 2012, THERMEC 2011 Supplement. p. 678-683 6 p. (Advanced Materials Research; vol. 409).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ductile fracture
Coalescence
Microstructure
Steel
Nucleation

The effect of Si on the precipitates for Nb bearing high purity ferritic stainless steel

Ito, M., Honda, Y., Aramaki, M., Kato, Y. & Furukimi, O., 2012, 18th International Federation for Heat Treatment and Surface Engineering. ASTM International, Vol. 1532 STP. p. 107-112 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Stainless Steel
Ferritic steel
Precipitates
Electron microscopes
2010

The effect of Si on the precipitates for nb bearing high-purity ferritic stainless steel

Ito, M., Honda, Y., Aramaki, M., Kato, Y. & Furukimi, O., 2010, 65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010. Vol. 5. p. 4213-4218 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Ferritic steel
Precipitates
Electron microscopes
Stainless steel
2009

Effects of graphite diameter on the strength of ferrous sintered material

Nakao, T., Aramaki, M., Furukimi, O. & Unarm, S., Jan 1 2009, Proceedings of the 17th IFHTSE Congress. The Japan Society for Heat Treatment (JSHT), p. 264-267 4 p. (Proceedings of the 17th IFHTSE Congress; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Graphite
graphite
Pore size
porosity
pearlite
2008

Fourier analysis of ductile fracture surface for high-Cr steel

Yamada, N., Aramaki, M., Funakawa, Y., Kate, Y., Nakajima, M. & Furukimi, O., 2008, Proceedings of the 17th IFHTSE Congress. The Japan Society for Heat Treatment (JSHT), Vol. 2. p. 533-536 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fourier analysis
Ductile fracture
Steel
Precipitates
precipitates

The effects of microstructures on the ductile fracture surface morphology in duplex stainless steel

Honda, Y., Yamada, N., Aramaki, M., Oikawa, M. & Furukimi, O., 2008, Proceedings of the 17th IFHTSE Congress. The Japan Society for Heat Treatment (JSHT), Vol. 2. p. 522-525 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ductile fracture
Stainless Steel
Surface morphology
stainless steels
Stainless steel

The stability of austenite in tensile deformation and its relation to a nitriding treatment in precipitation hardened stainless steel

Ichikawa, A., Aramaki, M. & Furukimi, O., 2008, Proceedings of the 17th IFHTSE Congress. The Japan Society for Heat Treatment (JSHT), Vol. 2. p. 506-509 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

tensile deformation
nitriding
Nitriding
Stainless Steel
austenite