If you made any changes in Pure these will be visible here soon.

Research Output 1986 2019

  • 65 Citations
  • 4 h-Index
  • 27 Article
  • 11 Conference contribution
Filter
Article
2019
1 Citation (Scopus)

Four-dimensional observation of ductile fracture in sintered iron using synchrotron X-ray laminography

Ozaki, Y., Mugita, Y., Aramaki, M., Furukimi, O., Oue, S., Jiang, F., Tsuji, T., Takeuchi, A., Uesugi, M. & Ashizuka, K., Mar 15 2019, In : Powder Metallurgy. 62, 2, p. 146-154 9 p.

Research output: Contribution to journalArticle

Ductile fracture
Synchrotrons
Coalescence
Crack initiation
synchrotrons

Void nucleation, and growth during tensile deformation of nanoscale precipitated steel and bainitic steel

Mugita, Y., Aramaki, M., Yamamoto, M., Takeuchi, A., Takeuchi, M., Yokota, T., Funakawa, Y. & Furukimi, O., Jan 1 2019, In : isij international. 59, 7, p. 1362-1368 7 p.

Research output: Contribution to journalArticle

Open Access
Steel
Nucleation
Grain boundaries
Tensile testing
Synchrotron radiation
2018

Einfluss von Nitrieren-Abschrecken und Aufkohlen-Abschrecken auf die Verschleißeigenschallen von industriellem Reineisen

Translated title of the contribution: Effects of nitriding-quenching and carburizingquenching on wear properties of industrial pure ironAramaki, M., Kozin, M., Yoshida, K. & Furukimi, O., Jun 1 2018, HTM - Journal of Heat Treatment and Materials, 73, 3, p. 131-143 13 p.

Research output: Contribution to specialist publicationArticle

Nitriding
Martensite
Quenching
Iron
Wear of materials

Evaluation of porosity closure during hot compression of steel by synchrotron X-ray laminography and FEM analysis

Watanabe, K., Ide, H., Nakasaki, M., Takeuchi, A., Aramaki, M. & Furukimi, O., Jan 1 2018, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 104, 2, p. 65-71 7 p.

Research output: Contribution to journalArticle

Steel
Hot pressing
Synchrotrons
closures
finite element method
1 Citation (Scopus)

Void nucleation, growth, and coalescence observed by synchrotron radiation x-ray laminography during tensile deformation of Fe–0.02 mass% N alloy

Furukimi, O., Harada, S., Mugita, Y., Aramaki, M., Yamamoto, M., Takeuchi, A., Takeuchi, M. & Funakawa, Y., Jan 1 2018, In : isij international. 58, 5, p. 943-951 9 p.

Research output: Contribution to journalArticle

Synchrotron radiation
Coalescence
Nucleation
Grain boundaries
X rays
2017

Effect of γ-phase stability on local deformation energy of α-γ duplex stainless steel

Yamamoto, M., Ochi, R., Yasuda, K., Aramaki, M., Munetoh, S. & Furukimi, O., Jan 1 2017, In : Materials Transactions. 58, 10, p. 1379-1385 7 p.

Research output: Contribution to journalArticle

Phase stability
Stainless Steel
stainless steels
Stainless steel
energy
4 Citations (Scopus)

Effects of Specimen thickness in tensile tests on elongation and deformation energy for industrially pure iron

Takeda, Y., Kiattisaksri, C., Aramaki, M., Munetoh, S. & Furukimi, O., Jan 1 2017, In : isij international. 57, 6, p. 1129-1137 9 p.

Research output: Contribution to journalArticle

Elongation
Iron
Stainless Steel
Nucleation
Stainless steel
3 Citations (Scopus)

Void nucleation behavior of single-crystal high-purity iron specimens subjected to tensile deformation

Furukimi, O., Kiattisaksri, C., Takeda, Y., Aramaki, M., Oue, S., Munetoh, S. & Tanaka, M., Jul 31 2017, In : Materials Science and Engineering A. 701, p. 221-225 5 p.

Research output: Contribution to journalArticle

tensile deformation
voids
purity
Nucleation
Iron
4 Citations (Scopus)

Voids nucleation and growth examination during tensile deformation for IF steel by synchrotron X-ray laminography and EBSD

Furukimi, O., Takeda, Y., Yamamoto, M., Aramaki, M., Munetoh, S., Takeuchi, A., Ide, H. & Nakasaki, M., Jan 1 2017, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 103, 8, p. 475-482 8 p.

Research output: Contribution to journalArticle

tensile deformation
Steel
Synchrotrons
voids
interstitials
2016
4 Citations (Scopus)

Effects of tensile test specimen thickness on elongation and deformation energy for industrial pure iron

Takeda, Y., Kiattisaksri, C., Aramaki, M., Munetoh, S. & Furukimi, O., Jan 1 2016, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 102, 10, p. 599-606 8 p.

Research output: Contribution to journalArticle

tensile tests
elongation
Elongation
Iron
iron
1 Citation (Scopus)

Wear resistance of industrial pure iron treated by nitriding and quenching followed by aging process

Furukimi, O., Katafuchi, H., Aramaki, M., Kozin, M., Oue, S., Yoshida, K., Narita, I., Yamada, N. & Yamamoto, M., Jan 1 2016, In : Materials Transactions. 57, 9, p. 1587-1592 6 p.

Research output: Contribution to journalArticle

nitriding
Nitriding
wear resistance
Wear resistance
Quenching
2015
6 Citations (Scopus)

Effect of tensile test specimen thickness on deformation energy for duplex stainless steel

Hirashima, T., Aramaki, M., Yamamoto, M., Yasuda, K., Munetoh, S. & Furukimi, O., Jan 1 2015, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 101, 5, p. 308-314 7 p.

Research output: Contribution to journalArticle

Stainless Steel
tensile tests
stainless steels
triaxial stresses
Stainless steel

FEM analysis of friction for pressing dies controlled by shot treatment

Abe, K., Fukaura, H., Aramaki, M. & Furukimi, O., Jan 1 2015, HTM - Journal of Heat Treatment and Materials, 70, 1, p. 26-32 7 p.

Research output: Contribution to specialist publicationArticle

Oils
Friction
Finite element method
Elastic deformation
Plastic deformation
2014
4 Citations (Scopus)

Examination of tensile deformation and void nucleation behaviors of duplex stainless steel using nano-indentation hardness test

Aramaki, M., Uchida, S., Yasuda, K., Oikawa, M. & Furukimi, O., Jan 1 2014, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 100, 10, p. 1261-1266 6 p.

Research output: Contribution to journalArticle

hardness tests
tensile deformation
Stainless Steel
martensitic transformation
Nanoindentation
2013
10 Citations (Scopus)

Local deformation energy and void formation behavior in 16%Cr ferritic steel

Furukimi, O., Niigaki, S., Yamada, N., Aramaki, M., Oue, S. & Funakawa, Y., Feb 4 2013, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 99, 1, p. 60-69 10 p.

Research output: Contribution to journalArticle

Ferritic steel
voids
steels
Coalescence
coalescing
2012
2 Citations (Scopus)

Improvement of die life with surface texture control and solid lubricant

Furukimi, O., Aramaki, M., Abe, K., Fukaura, H. & Yamada, N., Jun 25 2012, HTM - Haerterei-Technische Mitteilungen, 67, 2, p. 153-157 5 p.

Research output: Contribution to specialist publicationArticle

Solid lubricants
Textures
Shot peening
Powders
Lubricants
2011
4 Citations (Scopus)

Effect of combined shot treatment and nitriding on galling property of die used for high strength steels

Aramaki, M., Yamada, N. & Furukimi, O., Jul 15 2011, In : isij international. 51, 7, p. 1137-1141 5 p.

Research output: Contribution to journalArticle

Nitriding
High strength steel
Textures
Steel sheet
Abrasion

The effect of Si on the precipitates for Nb bearing high purity ferritic stainless steel

Ito, M., Honda, Y., Aramaki, M., Kato, Y. & Furukimi, O., Mar 1 2011, In : Journal of ASTM International. 8, 3

Research output: Contribution to journalArticle

Bearings (structural)
Stainless Steel
Ferritic steel
Precipitates
Electron microscopes
2009
1 Citation (Scopus)

Effect of graphite diameter added on the tensile strength of Fe-Cu-C sintered material

Aramaki, M., Nakao, T., Unami, S. & Furukimi, O., Aug 1 2009, In : Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 56, 8, p. 495-501 7 p.

Research output: Contribution to journalArticle

Graphite
Tensile strength
Powders
Microstructure
Pearlite
2002

The Portevin-LeChatelier effect in Cu-Al alloy and failure of the cottrell theory

Onodera, R., Quan, X. Z. & Aramaki, M., Jan 1 2002, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 66, 6, p. 627-633 7 p.

Research output: Contribution to journalArticle

strain rate
Strain rate
solutes
occurrences
causes
2001

Characteristics of Luders deformation and their computer simulation based on a work-softening model

Onodera, R., Morita, I., Kamikihara, R. & Aramaki, M., Nov 1 2001, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 87, 11, p. 41-48 8 p.

Research output: Contribution to journalArticle

work softening
yield point
Constitutive equations
constitutive equations
computerized simulation
2000
9 Citations (Scopus)

Stress drop, Luders strain and strain rate during serrated flow

Onodera, R., Nonomura, M. & Aramaki, M., Jan 1 2000, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 64, 12, p. 1162-1171 10 p.

Research output: Contribution to journalArticle

strain rate
Strain rate
intervals
strain gages
Strain gages
1999

Effects of co-addition of titanium and boron on microstructure of superplastic Cr-Mo steels

Aramaki, M., Onodera, R., Era, H. & Kishitake, K., Jan 1 1999, In : Materials Science and Technology. 15, 12, p. 1408-1413 6 p.

Research output: Contribution to journalArticle

Boron
Steel
Titanium
boron
titanium
5 Citations (Scopus)

Influence of carbon content on superplastic behavior in Ti- and B-added Cr-Mo steels

Aramaki, M., Higashida, K. & Onodera, R., Jan 1 1999, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 30, 5, p. 1185-1191 7 p.

Research output: Contribution to journalArticle

Steel
Carbon
steels
carbon
carbides
1997
1 Citation (Scopus)

Influence of carbon content on superplastic behaviour in Ti and B doped Cr-Mo steels

Aramaki, M., Nakai, O., Onodera, R. & Higashida, K., Dec 1 1997, In : Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 83, 12, p. 43-48 6 p.

Research output: Contribution to journalArticle

Steel
Carbon
steels
carbon
carbides
1990

クロムモリブデン鋼の超塑性に及ぼすTi B添加の影響

Translated title of the contribution: Effect of Addition of Ti and B on Superplastic Behaviour in Cr-Mo Steel Tsushima, K., Aramaki, M. & Onodera, R., May 1990, In : 塑性と加工. 31, p. 652-657 6 p.

Research output: Contribution to journalArticle

1986
2 Citations (Scopus)

ELECTRICAL RESISTIVITY CHANGE BY HYDROGEN ADSORPTION IN EVAPORATED THIN FILMS OF IRON.

Aramaki, M. & Hayashi, Y., Mar 1 1986, In : Nippon Kinzoku Gakkai-si. 50, 3, p. 298-303 6 p.

Research output: Contribution to journalArticle

Hydrogen
Iron
Adsorption
iron
Thin films