If you made any changes in Pure these will be visible here soon.

Research Output

  • 35 Citations
  • 4 h-Index
  • 14 Article
2020

5-Hydroxymethylfurfural Synthesis from Monosaccharides by a Biphasic Reaction-Extraction System Using a Microreactor and Extractor

Muranaka, Y., Matsubara, K., Maki, T., Asano, S., Nakagawa, H. & Mae, K., Jan 1 2020, (Accepted/In press) In : ACS Omega.

Research output: Contribution to journalArticle

Open Access

Change in Catalytic Activity of Potassium during CO2 Gasification of Char

Halim, N., Tajima, A., Asano, S., Kudo, S. & Hayashi, J. I., Jan 16 2020, In : Energy and Fuels. 34, 1, p. 225-234 10 p.

Research output: Contribution to journalArticle

Contactless mass transfer for intra-droplet extraction

Asano, S., Takahashi, Y., Maki, T., Muranaka, Y., Cherkasov, N. & Mae, K., Dec 1 2020, In : Scientific reports. 10, 1, 7685.

Research output: Contribution to journalArticle

Open Access

The distinctive effects of glucose-derived carbon on the performance of ni-based catalysts in methane dry reforming

Ashik, U. P. M., Asano, S., Kudo, S., Minh, D. P., Appari, S., Hisahiro, E. & Hayashi, J. I., Jan 2020, In : Catalysts. 10, 1, 21.

Research output: Contribution to journalArticle

Open Access
2019

Biochar-Assisted Water Electrolysis

Chen, L., Nakamoto, R., Kudo, S., Asano, S. & Hayashi, J. I., Nov 21 2019, In : Energy and Fuels. 33, 11, p. 11246-11252 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Improvement of Pelletability of Woody Biomass by Torrefaction under Pressurized Steam

Kudo, S., Okada, J., Ikeda, S., Yoshida, T., Asano, S. & Hayashi, J. I., Jan 1 2019, (Accepted/In press) In : Energy and Fuels.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Numerical and Experimental Quantification of the Performance of Microreactors for Scaling-up Fast Chemical Reactions

Asano, S., Yatabe, S., Maki, T. & Mae, K., May 17 2019, In : Organic Process Research and Development. 23, 5, p. 807-817 11 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Re-examination of Thermogravimetric Kinetic Analysis of Lignite Char Gasification

Asano, S., Choi, C., Ishiyama, K., Kudo, S., Gao, X. & Hayashi, J. I., 2019, (Accepted/In press) In : Energy and Fuels.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Revealing the Formation Mechanism of Alloyed Pd-Ru Nanoparticles: A Conversion Measurement Approach Utilizing a Microflow Reactor

Asano, S., Maki, T., Sebastian, V., Jensen, K. F. & Mae, K., Jan 1 2019, In : Langmuir.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Synthesis of Small Lipid Nanoparticles Using an Inkjet Mixing System Aiming to Reduce Drug Loss

Inohara, K., Asano, S., Maki, T. & Mae, K., Oct 1 2019, In : Chemical Engineering and Technology. 42, 10, p. 2061-2066 6 p.

Research output: Contribution to journalArticle

2017

Design protocol of microjet mixers for achieving desirable mixing times with arbitrary flow rate ratios

Asano, S., Yamada, S., Maki, T., Muranaka, Y. & Mae, K., Dec 2017, In : Reaction Chemistry and Engineering. 2, 6, p. 830-841 12 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Precise analysis and control of polymerization kinetics using a micro flow reactor

Asano, S., Maki, T., Nakayama, R., Utsunomiya, R., Muranaka, Y., Kuboyama, T. & Mae, K., 2017, In : Chemical Engineering and Processing: Process Intensification. 119, p. 73-80 8 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
2016

Evaluation of mixing profiles for a new micromixer design strategy

Asano, S., Maki, T. & Mae, K., Apr 1 2016, In : AIChE Journal. 62, 4, p. 1154-1161 8 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)